No sound in Gnome [SOLVED]
Need help with sound. I setup Gnome and when I want check sound it says:
audiotestsrc wave=sine freq=512 ! audioconvert ! audioresample ! gconfaudiosink: Internal GStreamer error: state change failed.
Please file a bug at http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer.
Maybe something needs to be put in rc.conf?
What I must to do for the fixing this? Any advices would be apreciated
HOW IT WAS SOLVED:
pacman -S alsa-plugins (additionally to alsa-utils alsa-oss)
afterwards: alsaconf
and sound appeared!
Last edited by vennen (2008-03-29 19:45:30)
Just tryed playing a wav with aplay and it didn't give me any errors, but I didn't hear anything if that helps anymore. Running a amixer set MASTER 70% unmute also gives me the unable to find simple control 'MASTER',0 error too, though I can change the volume fine with alsamixer so I'm not sure why that is. The correct module is loaded (snd-hda-intel). Otherwise I'm at a complete loss.
edit: amixer set MASTER 70% gives me the same error on an ubuntu livecd where sound does work so that seems normal. I don't know what changed, but I can now open the volume control so the gstreamer error goes away, however I still can't get any sound, be it with aplay or something else. I'm starting to think the solution may be to pass on arch and move to something better.
Last edited by kryptobs2000 (2010-07-10 16:37:47)
Similar Messages
-
[SOLVED] No sound in Gnome 3 after upgrade
Hi,
After last upgrade, I have no sound in Gnome 3.
I think all modules are loading:
lsmod| grep snd
snd_hda_codec_conexant 47158 1
snd_hda_intel 25700 4
snd_hda_codec 97432 2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 74926 3 snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
snd_timer 18966 2 snd_pcm
snd 60021 13 snd_hwdep,snd_timer,snd_hda_codec_conexant,snd_pcm,snd_hda_codec,snd_hda_intel,thinkpad_acpi
soundcore 5442 1 snd
also the soundcard is recognized:
lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf2620000 irq 47
29 [ThinkPadEC ]: ThinkPad EC - ThinkPad Console Audio Control
ThinkPad Console Audio Control at EC reg 0x30, fw 6HHT14WW-1.02
and the user is in aduio group. The problem seems to be similar with this one:
https://bbs.archlinux.org/viewtopic.php?pid=1159367
but as I'm not using LXDE, the solution does not work for me.
Do you have any clues what to do with this?
Thank you!
EDIT: hm, the sound started working, when I launched Gnome Music Player Client... Still, any ideas why this happened?
EDIT2: now it works also after reboot, so it seems like mpd did some mess with the sound. I'm marking this topic as solved, but if someone will know what happened, then I'll be happy just to understand it
Last edited by payek (2012-09-14 03:59:45)Hi, i had exactly the same problem but i managed to solve it by installing pavucontrol via pacman (pacman -S pavucontrol) and setting Analog Stereo Duplex in Configuration Tab. Hope it works for you! ;-)
-
When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can anyone please help me?
Sincerely,
EricRun this when you have the problem and post the results here.
EtreCheck
This will tell us what is loaded -
No sound on GNOME with pulseaudio [Resolved]
Hi there,
the title says it all: I've lost all sound in GNOME. Hardware is checked and fully working (dual-boot). I've gone through the Wiki and Mixer settings several times now, with no progress. pavumeter shows me active levels when playing some file, like in totem, but there's nothing to hear. I've both tried system wide use of pulseaudio as user based, all the same.
Any ideas please?
Last edited by scoona (2009-12-10 17:48:46)In the end, if pavucontrol shows that your sound card IS detected and that sound is playing, the issue is probably alsa related. Things to check:-
1. Is the app producing sound (level meter in pavucontrol)?
2. Is the correct output sink selected (under playback tab in pavucontrol, compare with Output Devices tab)?
3. Is the app or output device muted in pavucontrol? Also check output level in the Output Devices tab.
If the three steps are all working, then it almost certainly something being muted, or wrong detection of the sound card etc. -
[Solved] No sound (using Gnome with Pulseaudio)
Hello,
I have an issue with my audio. Since yesterday it has not been working, as in no sound in my headphones
I updated gnome, cinnamon and linux yesterday. I did not however update pulseaudio or anything else alsa related (as far as I can tell).
Another possible cause could be switching from cinnamon to gnome which I did yesterday (I don't know when exactly my audio stopped working).
Other relevant facts:
-My mic is still working fine
-Using the Xonar DG sound card
-Nothing is muted in alsamixer
-not a hardware issue, working fine in dual boot windows
Pulse audio in verbose mode suggest that the issue is not pulseaudio (as does pavucontrol's visualization):
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 5.0
I: [pulseaudio] main.c: Page size is 4096 bytes
I: [pulseaudio] main.c: Machine ID is 16327981f21a4906af3310ebf24dab15.
I: [pulseaudio] main.c: Session ID is c1.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /home/username/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-5.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 MMXEXT
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/username/.config/pulse/16327981f21a4906af3310ebf24dab15-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/username/.config/pulse/16327981f21a4906af3310ebf24dab15-stream-volumes'.
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/username/.config/pulse/16327981f21a4906af3310ebf24dab15-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA NVidia/HDA NVidia.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA NVidia
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA NVidia use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA NVidia
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_01_00.1.
I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_01_00.1"
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device hdmi:0.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (HDMI)' (hdmi-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
I: [pulseaudio] sink.c: device.api = "alsa"
I: [pulseaudio] sink.c: device.class = "sound"
I: [pulseaudio] sink.c: alsa.class = "generic"
I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
I: [pulseaudio] sink.c: alsa.subdevice = "0"
I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c: alsa.device = "3"
I: [pulseaudio] sink.c: alsa.card = "0"
I: [pulseaudio] sink.c: alsa.card_name = "HDA NVidia"
I: [pulseaudio] sink.c: alsa.long_card_name = "HDA NVidia at 0xfeaf8000 irq 19"
I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] sink.c: device.bus_path = "pci-0000:01:00.1"
I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0"
I: [pulseaudio] sink.c: device.bus = "pci"
I: [pulseaudio] sink.c: device.vendor.id = "10de"
I: [pulseaudio] sink.c: device.vendor.name = "NVIDIA Corporation"
I: [pulseaudio] sink.c: device.product.id = "0e0a"
I: [pulseaudio] sink.c: device.product.name = "GK104 HDMI Audio Controller"
I: [pulseaudio] sink.c: device.string = "hdmi:0"
I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c: device.profile.name = "hdmi-stereo"
I: [pulseaudio] sink.c: device.profile.description = "Digital Stereo (HDMI)"
I: [pulseaudio] sink.c: device.description = "GK104 HDMI Audio Controller Digital Stereo (HDMI)"
I: [pulseaudio] sink.c: alsa.mixer_name = "Nvidia GPU 40 HDMI/DP"
I: [pulseaudio] sink.c: alsa.components = "HDA:10de0040,14622843,00100100"
I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of GK104 HDMI Audio Controller Digital Stereo (HDMI)"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: alsa.card = "0"
I: [pulseaudio] source.c: alsa.card_name = "HDA NVidia"
I: [pulseaudio] source.c: alsa.long_card_name = "HDA NVidia at 0xfeaf8000 irq 19"
I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:01:00.1"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "10de"
I: [pulseaudio] source.c: device.vendor.name = "NVIDIA Corporation"
I: [pulseaudio] source.c: device.product.id = "0e0a"
I: [pulseaudio] source.c: device.product.name = "GK104 HDMI Audio Controller"
I: [pulseaudio] source.c: device.string = "0"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="0" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0 (alsa_card.pci-0000_01_00.1) module loaded.
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/Xonar DG/Xonar DG.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card Xonar DG
I: [pulseaudio] (alsa-lib)main.c: error: failed to import Xonar DG use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card Xonar DG
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:1: Invalid argument
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:1: Invalid argument
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL iec958:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer iec958:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:1: Invalid argument
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround40:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround40:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround41:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround41:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround50:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround50:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround51:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround51:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround71:1: Invalid argument
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL iec958:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer iec958:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.CMI8786.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1: No such file or directory
I: [pulseaudio] module-card-restore.c: Restored profile 'output:analog-stereo+input:analog-stereo' for card alsa_card.pci-0000_03_07.0.
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_03_07.0.
I: [pulseaudio] card.c: Created 1 "alsa_card.pci-0000_03_07.0"
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device front:1.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] sink.c: Created sink 1 "alsa_output.pci-0000_03_07.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
I: [pulseaudio] sink.c: device.api = "alsa"
I: [pulseaudio] sink.c: device.class = "sound"
I: [pulseaudio] sink.c: alsa.class = "generic"
I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c: alsa.name = "Multichannel"
I: [pulseaudio] sink.c: alsa.id = "Multichannel"
I: [pulseaudio] sink.c: alsa.subdevice = "0"
I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c: alsa.device = "0"
I: [pulseaudio] sink.c: alsa.card = "1"
I: [pulseaudio] sink.c: alsa.card_name = "Xonar DG"
I: [pulseaudio] sink.c: alsa.long_card_name = "C-Media Oxygen HD Audio at 0xe800, irq 22"
I: [pulseaudio] sink.c: alsa.driver_name = "snd_oxygen"
I: [pulseaudio] sink.c: device.bus_path = "pci-0000:03:07.0"
I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card1"
I: [pulseaudio] sink.c: device.bus = "pci"
I: [pulseaudio] sink.c: device.vendor.id = "13f6"
I: [pulseaudio] sink.c: device.vendor.name = "C-Media Electronics Inc"
I: [pulseaudio] sink.c: device.product.id = "8788"
I: [pulseaudio] sink.c: device.product.name = "CMI8786 (Xonar DG)"
I: [pulseaudio] sink.c: device.string = "front:1"
I: [pulseaudio] sink.c: device.buffering.buffer_size = "352800"
I: [pulseaudio] sink.c: device.buffering.fragment_size = "352800"
I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c: device.profile.name = "analog-stereo"
I: [pulseaudio] sink.c: device.profile.description = "Analog Stereo"
I: [pulseaudio] sink.c: device.description = "CMI8786 (Xonar DG) Analog Stereo"
I: [pulseaudio] sink.c: alsa.mixer_name = "CMI8786"
I: [pulseaudio] sink.c: alsa.components = "CS4245 CMI8786"
I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] source.c: Created source 1 "alsa_output.pci-0000_03_07.0.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of CMI8786 (Xonar DG) Analog Stereo"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: alsa.card = "1"
I: [pulseaudio] source.c: alsa.card_name = "Xonar DG"
I: [pulseaudio] source.c: alsa.long_card_name = "C-Media Oxygen HD Audio at 0xe800, irq 22"
I: [pulseaudio] source.c: alsa.driver_name = "snd_oxygen"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:03:07.0"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card1"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "13f6"
I: [pulseaudio] source.c: device.vendor.name = "C-Media Electronics Inc"
I: [pulseaudio] source.c: device.product.id = "8788"
I: [pulseaudio] source.c: device.product.name = "CMI8786 (Xonar DG)"
I: [pulseaudio] source.c: device.string = "1"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 1.0 fragments of size 352800 bytes (2000.00ms), buffer size is 352800 bytes (2000.00ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -125.50 dB to 0.00 dB.
I: [pulseaudio] alsa-sink.c: Fixing base volume to 0.00 dB
I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-sink.c: Using hardware mute control.
I: [alsa-sink-Multichannel] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-Multichannel] alsa-sink.c: Starting playback.
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-source.c: Successfully opened device front:1.
I: [pulseaudio] alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-source.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] source.c: Created source 2 "alsa_input.pci-0000_03_07.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: alsa.resolution_bits = "16"
I: [pulseaudio] source.c: device.api = "alsa"
I: [pulseaudio] source.c: device.class = "sound"
I: [pulseaudio] source.c: alsa.class = "generic"
I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
I: [pulseaudio] source.c: alsa.name = "Multichannel"
I: [pulseaudio] source.c: alsa.id = "Multichannel"
I: [pulseaudio] source.c: alsa.subdevice = "0"
I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c: alsa.device = "0"
I: [pulseaudio] source.c: alsa.card = "1"
I: [pulseaudio] source.c: alsa.card_name = "Xonar DG"
I: [pulseaudio] source.c: alsa.long_card_name = "C-Media Oxygen HD Audio at 0xe800, irq 22"
I: [pulseaudio] source.c: alsa.driver_name = "snd_oxygen"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:03:07.0"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card1"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "13f6"
I: [pulseaudio] source.c: device.vendor.name = "C-Media Electronics Inc"
I: [pulseaudio] source.c: device.product.id = "8788"
I: [pulseaudio] source.c: device.product.name = "CMI8786 (Xonar DG)"
I: [pulseaudio] source.c: device.string = "front:1"
I: [pulseaudio] source.c: device.buffering.buffer_size = "131072"
I: [pulseaudio] source.c: device.buffering.fragment_size = "131072"
I: [pulseaudio] source.c: device.access_mode = "mmap+timer"
I: [pulseaudio] source.c: device.profile.name = "analog-stereo"
I: [pulseaudio] source.c: device.profile.description = "Analog Stereo"
I: [pulseaudio] source.c: device.description = "CMI8786 (Xonar DG) Analog Stereo"
I: [pulseaudio] source.c: alsa.mixer_name = "CMI8786"
I: [pulseaudio] source.c: alsa.components = "CS4245 CMI8786"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-source.c: Using 1.0 fragments of size 131072 bytes (743.04ms), buffer size is 131072 bytes (743.04ms)
I: [pulseaudio] alsa-source.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-source.c: Hardware volume ranges from -12.00 dB to 12.00 dB.
I: [pulseaudio] alsa-source.c: Fixing base volume to -12.00 dB
I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-source.c: Using hardware mute control.
I: [alsa-source-Multichannel] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-source-Multichannel] alsa-source.c: Starting capture.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #7; argument: "device_id="1" name="pci-0000_03_07.0" card_name="alsa_card.pci-0000_03_07.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card1 (alsa_card.pci-0000_03_07.0) module loaded.
I: [pulseaudio] module-udev-detect.c: Found 2 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
I: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #8; argument: "channels=2").
I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #9; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #11; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #10; argument: "").
I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #12; argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #13; argument: "").
I: [pulseaudio] module.c: Loaded "module-gconf" (index: #14; argument: "").
I: [pulseaudio] module-default-device-restore.c: Restored default sink 'alsa_output.pci-0000_03_07.0.analog-stereo'.
I: [pulseaudio] module-default-device-restore.c: Restored default source 'alsa_input.pci-0000_03_07.0.analog-stereo'.
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #15; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #16; argument: "").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #17; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #18; argument: "").
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #19; argument: "").
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #20; argument: "").
I: [pulseaudio] client.c: Created 0 "Login Session c1"
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #21; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #22; argument: "").
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #23; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #24; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #25; argument: "").
I: [pulseaudio] main.c: Daemon startup complete.
I: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)"
E: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory.
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
I: [pulseaudio] source-output.c: Trying to change sample rate
I: [pulseaudio] remap.c: Using generic matrix remapping
I: [pulseaudio] source-output.c: Created output 0 "Peak detect" on alsa_input.pci-0000_03_07.0.analog-stereo with sample spec float32le 1ch 25Hz and channel map mono
I: [pulseaudio] source-output.c: application.id = "org.gnome.VolumeControl"
I: [pulseaudio] source-output.c: media.name = "Peak detect"
I: [pulseaudio] source-output.c: application.name = "GNOME Volume Control Dialog"
I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c: native-protocol.version = "29"
I: [pulseaudio] source-output.c: application.icon_name = "multimedia-volume-control"
I: [pulseaudio] source-output.c: application.version = "3.12.1"
I: [pulseaudio] source-output.c: application.process.id = "2090"
I: [pulseaudio] source-output.c: application.process.user = "username"
I: [pulseaudio] source-output.c: application.process.host = "gimli"
I: [pulseaudio] source-output.c: application.process.binary = "gnome-control-center"
I: [pulseaudio] source-output.c: application.language = "en_US.UTF-8"
I: [pulseaudio] source-output.c: window.x11.display = ":0.0"
I: [pulseaudio] source-output.c: application.process.machine_id = "16327981f21a4906af3310ebf24dab15"
I: [pulseaudio] source-output.c: application.process.session_id = "c1"
I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.gnome.VolumeControl"
I: [pulseaudio] protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
I: [alsa-source-Multichannel] alsa-source.c: Increasing minimal latency to 1.00 ms
I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_03_07.0.analog-stereo idle for too long, suspending ...
I: [alsa-sink-Multichannel] alsa-sink.c: Device suspended...
I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_01_00.1.hdmi-stereo idle for too long, suspending ...
I: [alsa-sink-HDMI 0] alsa-sink.c: Device suspended...
I: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
I: [pulseaudio] sink-input.c: Trying to change sample rate
I: [pulseaudio] alsa-sink.c: Updating rate for device front:1, new rate is 48000
I: [pulseaudio] source.c: Changed sampling rate successfully
I: [pulseaudio] sink.c: Changed sampling rate successfully
I: [pulseaudio] sink-input.c: Rate changed to 48000 Hz
I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-media-role:test.
I: [alsa-sink-Multichannel] alsa-sink.c: Trying resume...
I: [alsa-sink-Multichannel] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [alsa-sink-Multichannel] alsa-util.c: ALSA period wakeups disabled
I: [alsa-sink-Multichannel] alsa-sink.c: Time scheduling watermark is 18.38ms
I: [alsa-sink-Multichannel] alsa-sink.c: Resumed successfully...
I: [alsa-sink-Multichannel] alsa-sink.c: Starting playback.
I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
I: [pulseaudio] remap.c: Using generic matrix remapping
I: [pulseaudio] sink-input.c: Created input 0 "Front Right" on alsa_output.pci-0000_03_07.0.analog-stereo with sample spec s16le 1ch 48000Hz and channel map front-right
I: [pulseaudio] sink-input.c: event.id = "audio-channel-front-right"
I: [pulseaudio] sink-input.c: media.name = "Front Right"
I: [pulseaudio] sink-input.c: media.role = "test"
I: [pulseaudio] sink-input.c: media.filename = "/usr/share/sounds/freedesktop/stereo/audio-channel-front-right.oga"
I: [pulseaudio] sink-input.c: application.name = "libcanberra"
I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
I: [pulseaudio] sink-input.c: native-protocol.version = "29"
I: [pulseaudio] sink-input.c: application.id = "org.gnome.VolumeControl"
I: [pulseaudio] sink-input.c: application.version = "0.30"
I: [pulseaudio] sink-input.c: application.process.id = "2090"
I: [pulseaudio] sink-input.c: application.process.user = "username"
I: [pulseaudio] sink-input.c: application.process.host = "gimli"
I: [pulseaudio] sink-input.c: application.process.binary = "gnome-control-center"
I: [pulseaudio] sink-input.c: application.icon_name = "multimedia-volume-control"
I: [pulseaudio] sink-input.c: application.language = "en_US.UTF-8"
I: [pulseaudio] sink-input.c: window.x11.display = ":0.0"
I: [pulseaudio] sink-input.c: application.process.machine_id = "16327981f21a4906af3310ebf24dab15"
I: [pulseaudio] sink-input.c: application.process.session_id = "c1"
I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:test"
I: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
I: [pulseaudio] protocol-native.c: Final latency 3837.50 ms = 1960.00 ms + 2*20.00 ms + 1837.50 ms
I: [pulseaudio] sink-input.c: Freeing input 0 "Front Right"
I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_03_07.0.analog-stereo idle for too long, suspending ...
I: [alsa-sink-Multichannel] alsa-sink.c: Device suspended...
^CI: [pulseaudio] main.c: Got signal SIGINT.
I: [pulseaudio] main.c: Exiting.
I: [pulseaudio] main.c: Daemon shutdown initiated.
I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #25).
I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #25).
I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #24).
I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #24).
I: [pulseaudio] module.c: Unloading "module-role-cork" (index: #23).
I: [pulseaudio] module.c: Unloaded "module-role-cork" (index: #23).
I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #22).
I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #22).
I: [pulseaudio] module.c: Unloading "module-systemd-login" (index: #21).
I: [pulseaudio] client.c: Freed 0 "Login Session c1"
I: [pulseaudio] module.c: Unloaded "module-systemd-login" (index: #21).
I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #20).
I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #20).
I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #19).
I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #19).
I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #18).
I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #18).
I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #17).
I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #17).
I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #16).
I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #16).
I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #15).
I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #15).
I: [pulseaudio] module.c: Unloading "module-gconf" (index: #14).
I: [pulseaudio] module.c: Unloaded "module-gconf" (index: #14).
I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #13).
I: [pulseaudio] source-output.c: Freeing output 0 "Peak detect"
I: [pulseaudio] client.c: Freed 1 "GNOME Volume Control Dialog"
I: [pulseaudio] client.c: Freed 2 "libcanberra"
I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #13).
I: [pulseaudio] module.c: Unloading "module-esound-protocol-unix" (index: #12).
I: [pulseaudio] module.c: Unloaded "module-esound-protocol-unix" (index: #12).
I: [pulseaudio] module.c: Unloading "module-bluez5-discover" (index: #11).
I: [pulseaudio] module.c: Unloaded "module-bluez5-discover" (index: #11).
I: [pulseaudio] module.c: Unloading "module-bluetooth-discover" (index: #10).
I: [pulseaudio] module.c: Unloaded "module-bluetooth-discover" (index: #10).
I: [pulseaudio] module.c: Unloading "module-bluetooth-policy" (index: #9).
I: [pulseaudio] module.c: Unloaded "module-bluetooth-policy" (index: #9).
I: [pulseaudio] module.c: Unloading "module-jackdbus-detect" (index: #8).
I: [pulseaudio] module.c: Unloaded "module-jackdbus-detect" (index: #8).
I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #7).
I: [pulseaudio] sink.c: Freeing sink 1 "alsa_output.pci-0000_03_07.0.analog-stereo"
I: [pulseaudio] source.c: Freeing source 1 "alsa_output.pci-0000_03_07.0.analog-stereo.monitor"
I: [pulseaudio] source.c: Freeing source 2 "alsa_input.pci-0000_03_07.0.analog-stereo"
I: [pulseaudio] card.c: Freed 1 "alsa_card.pci-0000_03_07.0"
I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #7).
I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #6).
I: [pulseaudio] sink.c: Freeing sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo"
I: [pulseaudio] source.c: Freeing source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor"
I: [pulseaudio] card.c: Freed 0 "alsa_card.pci-0000_01_00.1"
I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #6).
I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
I: [pulseaudio] main.c: Daemon terminated.
aplay -l:
card 0: DG [Xonar DG], device 0: Multichannel [Multichannel]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: DG [Xonar DG], device 1: Digital [Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
aplay -L :
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=DG
Xonar DG, Multichannel
Default Audio Device
front:CARD=DG,DEV=0
Xonar DG, Multichannel
Front speakers
surround40:CARD=DG,DEV=0
Xonar DG, Multichannel
4.0 Surround output to Front and Rear speakers
surround41:CARD=DG,DEV=0
Xonar DG, Multichannel
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=DG,DEV=0
Xonar DG, Multichannel
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=DG,DEV=0
Xonar DG, Multichannel
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=DG,DEV=0
Xonar DG, Multichannel
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=DG,DEV=0
Xonar DG, Multichannel
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
HDA NVidia, HDMI 1
HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
HDA NVidia, HDMI 2
HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
HDA NVidia, HDMI 3
HDMI Audio Output
My best guess at this point is that something(tm) is wrong with alsa. I have no idea how to troubleshoot this though. Any advice?
Please let me know if anything important is missing.
Last edited by InfamousBlue (2014-05-02 09:38:49)Did you ever have a copy of front channels or a mix of all of them played on the headphone jack with alsa only? I doubt it. If you kill pulseaudio and run following, what channels do you hear from headphones?
speaker-test -c 8 -t wav -D plughw:DG,0
This is probably more of a pulseaudio issue, since alsa usually does not copy streams.
InfamousBlue wrote:I did not however update pulseaudio or anything else alsa related (as far as I can tell).
Partial upgrades are not supported. There are some remapping examples on the wiki. If you seek a hardware remapping solution try hdajackretask from alsa-tools, it works however for hda compliant cards.
Last edited by emeres (2014-05-02 07:30:17) -
[SOLVED] No Sound in Gnome - Problem with GStreamer?
I've been using other distros for awhile, but this is my first time with Arch. Spent most of the morning getting it setup and now I'm pretty much done except getting sound to work I believe.
So, not sure what info I should give troubleshooting wise, please ask if anything else is required. Alsa detects it fine, but gstreamer gives me the following error:
No volume control GStreamer plugins and/or devices found.
Last edited by kryptobs2000 (2010-07-10 17:33:01)Just tryed playing a wav with aplay and it didn't give me any errors, but I didn't hear anything if that helps anymore. Running a amixer set MASTER 70% unmute also gives me the unable to find simple control 'MASTER',0 error too, though I can change the volume fine with alsamixer so I'm not sure why that is. The correct module is loaded (snd-hda-intel). Otherwise I'm at a complete loss.
edit: amixer set MASTER 70% gives me the same error on an ubuntu livecd where sound does work so that seems normal. I don't know what changed, but I can now open the volume control so the gstreamer error goes away, however I still can't get any sound, be it with aplay or something else. I'm starting to think the solution may be to pass on arch and move to something better.
Last edited by kryptobs2000 (2010-07-10 16:37:47) -
From reading around the Gnome 3 threads, I've noticed a few people having sound problems, but no dedicated thread. Since upgrading, I can't get sound working at all, even in XFCE.
Gnome requires pulseaudio, and I think i've got it configured properly, but I just don't get any sound. If I open up the PulseAudio volume control, I can see my card selected, and I even see pulsating sound bars when I try to play sound. But I still don't actually get any sound! Same in XFCE. I can even see the pulsating sound bars when I try to play via ALSA thanks to the asound.conf that pulseaudio creates...but no sound.
I've tried restarting pulseaudio with max logging, but no clues there.
The sound modules seem to have loaded OK. I don't think there is a udev problem
I've tried killing pulseaudio, removing the pulseaudio ALSA config, and playing directly to ALSA. I can see my card in alsamixer, and all the channels are unmuted.....but still no sound.
It's getting annoying now...I want my music back!
anyone else had similar problems
cheers
Last edited by soylent_green_is_hamster (2011-05-04 20:09:05)Hi, i had exactly the same problem but i managed to solve it by installing pavucontrol via pacman (pacman -S pavucontrol) and setting Analog Stereo Duplex in Configuration Tab. Hope it works for you! ;-)
-
Some keyboard error when use gnome[solved]
Today when I used firefox to browse sth suddenly I found there were something wrong with my keyboard and gnome3 that when I presses a key the system answers nothing but a 'den' sound and if the key is pressed for a while and then the right action will be taken after the 'den' sound. For example, press a and release it immediately, i will get a 'den' sound, press a for a while, I will get two 'den' sound and a sequence of a character like 'aaaaaaaaaaaaa' in the text box.
Firstly I think this may be caused by ibus but the problem is still there after i stop the ibus-deamon and reboot the system. In fact, the keybord works ok in the text environment and in my root gnome3 enviroment.
Please, who can tell me what's wrong with my gnome and keyboard and how can I fix it.
finally I find maybe I happened to turn on the slowkey option and I turn it off.
Last edited by sio2liuli (2011-12-17 09:13:20)I guess I shall delete some config files, but i don't know which one to delete.
-
[gnome SOLVED] menu not refreshing
Hello everyone, seems I am experiencing a problem with my gnome menu, when I add or remove a new entry I have to manually pkill the gnome-panel process for the new entries (or the removed to be actually removed) from it.
Anyone else experiencing the same?
Last edited by pestilence (2008-03-16 20:52:57)Ok solved it, after rebooting I am not experiencing the problem.
-
How to enable event sounds in GNOME??
I have installed the gnome-audio package,and then Preference->Sound->
General->Enabale sound server starup ,sounds for event.
also ssystem bell->sound a audioble are secleted.
I play the sounds for test,but no sound heard.
how can I get the event sounds work?? :?:resoled by install esd package
-
System sounds cause gnome to freeze on startup
So far I've found six threads describing this problem, but all remain unresolved. So please excuse my starting yet another thread but I thought it would be the best way to bump them all.
Situation - new to Archlinux but not to Linux. I managed a network install of the base system and then added xorg, gnome and a few bits and pieces and got it all going, more or less. The problem is that sometimes when gnome starts up after the login screen, it freezes after loading the top and bottom panels. Usually the Applications/Places/System menus are visible, and sometimes the workspace switcher on the bottom panel, but no other panel app icons, nor desktop icons. There is a mouse pointer visible which I can move around but left and right clicking do nothing. Usually I can get into a virtual terminal with ctrl-alt-F1, but sometimes I get no response from the keyboard at all and I have to push the computer reset button to reboot. The following threads seem to describe the same problem:
This one. The OP suggests deleting ~/.gnome2/session but there ain't no such file/directory on my system.
That one.
Yonder one.
Another one!
Oh no! Yet another one.
The plot thickens. A clue.
I can confirm the OP's finding in the last thread. Enabling system sounds causes the problem. Deleting the ~/.gconf/desktop/gnome/sound directory (not, ~/.gconf/gnome/sound) means that gnome starts up OK, but disconcertingly quietly.
So - any solutions? Any way to get gnome and all the bells, whistles, cheeps and chirrups?
Oh - and I'm enjoying Arch. I'm posting from a (silent) Arch desktop now. I needed a challenge after Gentoo.
Last edited by terracotta_shore (2007-05-06 20:06:42)Thanks for your comments.
I updated today which included esd-0.2.38-1, the new kernel, and other bits, but I still get a lockup if I disable system sounds. But one useful thing (for me). I installed KDE over the weekend - and it plays its sounds OK. Before that if I had a gnome freeze I had to go into a virtual terminal, take out the ~/.gconf/desktop/gnome/sound directory and reboot. But now, when gnome froze, I ctl-alt-backspace'd, and then logged into KDE which played me a merry tune just to keep my spirits up. I was then able to delete the sound directory, log out and then log back into a now thawed out, albeit silent, gnome.
Avoids a reboot - which is good.
By the way. Now I've got two wastebin icons (one labelled Trash, the other Wastebin) on my gnome desktop courtesy of KDE. I know why, and I've come across this irritation before, but is there any way of getting rid of the extra desktop icon in gnome without losing the KDE one? I've never figured this one out. -
Alsa does not select correct sound card. SOLVED
I have onboard sound and do not have any additional sound cards installed. Alsa detects two soundcards, but for some reason seems to prefer the one that doesn't work. I am honestly not sure what the other audio device is; I do not have a second sound card installed, nor a modem or a PC speaker or any other audio device that I know of. It has always been that way, and I didn't look into it any deeper than that. I have been using Arch Linux for a about four years and the audio has worked flawlessly until I re-installed a few days ago.
For reference, the HDA NVidia sound card is the one I want to output sound. The non-working one is Conexant CX8801.
My symptoms are as follows:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: NVidia [HDA NVidia], device 0: ALC883 Analog [ALC883 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 1: ALC883 Digital [ALC883 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
# cat /proc/asound/cards
0 [CX8801 ]: CX88x - Conexant CX8801
Conexant CX8801 at 0xf9000000
1 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfe024000 irq 23
As you can see, the Conexant CX8801 (the wrong card) takes the index 0 position.
My usual alsa setup routine is to run the alsaconf script. The alsaconf script edits /etc/modprobe.d/sound.conf for me, where it should explicitly identify the HDA NVidia card as index 0. In the sound.conf below, alsaconf generated the first two lines. I wrote the third line as a course of troubleshooting, but it still does not work.
$ cat /etc/modprobe.d/sound.conf
#THESE LINES WERE GENERATED BY ALSACONF SCRIPT
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
#THIS LINE WAS GENERATED BY ME
option snd-hda-intel index=0
$ cat /etc/modprobe.d/modprobe.conf
# /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
# NOTICE THERE ARE NO CONFIGURATIONS IN THIS FILE. EMPTY.
I am by no means an alsa guru, so that's why I've enlisted the help of the forums. Tell me, what am I forgetting? What don't I know?
Last edited by cory.schwartz (2010-06-16 02:52:06)Install asoundconf http://aur.archlinux.org/packages.php?ID=23382
do
asoundconf list
to find out the correct name, then do
asoundconf set-default-card bla
to set the default card.
asoundconf creates a ~/.asoundrc.asoundconf and sets an include for that fil in ~/.asoundrc -
Can't get sound to work [SOLVED]
Hi, I'm new to arch/linux in general. Built a computer, and can't get sound to work. I ran Ubuntu for a short period of time, and sound worked there, so I'm assuming there's no hardware issue here.
I'm a little bit stuck as to what I should be doing. Help?
Last edited by uma (2012-01-28 22:51:25)Start with the wiki: https://wiki.archlinux.org/index.php/Ad … chitecture
If you still can't figure it out and you want help, at least post some info, instead of 'can't get it to work' (this implies that you tried something, but what?). -
Starting Mythfrontend on tv-out - gnome [solved]
I've been running mythtv on KDE3, running it on my TV. I did a full system upgrade and with KDE4, my KDE desktop does not extend onto my tv, although I have a mousepointer on a black background.
To hopefully get the system back up and running while I figure that out, I installed gnome and tried to run mythtv on that. I am a complete newbie on gnome. I did manage to create a launcher, but I can't figure out how to make mythfrontend launch on my tv. It always launches on the system monitor. I'm assuming this is something basic, but can't seem to find any info on it.
Last edited by timm (2009-05-04 22:09:11)I found that an alt-F2 gives you a run window, and if I start it there it runs on the tv-out. It'd still be nice to start it there with a couple clicks on an icon, though.
-
World of padman : sound problem (almost solved, freezes pb inside now)
Hi,
I just installed world of padman on Arch via AUR package, and all seems fine except I can't get sound working.
I'm quite surprised because it doesn't seem there are any errors :
------ Initializing Sound ------
Initializing SDL audio driver...
SDL audio driver is "dsp".
SDL_AudioSpec:
Format: AUDIO_S16LSB
Freq: 22050
Samples: 512
Channels: 2
Starting SDL audio callback...
SDL audio initialized.
----- Sound Info -----
1 stereo
16384 samples
16 samplebits
1 submission_chunk
22050 speed
0x8b60900 dma buffer
No background file.
Sound initialization successful.
Sound memory manager started
Loading vm file vm/ui.qvm...
...which has vmMagic VM_MAGIC_VER2
Loading 1243 jump table targets
VM file ui compiled to 749518 bytes of code
ui loaded in 1451936 bytes on the hunk
[WoP Music] Playing "down the hatch"
Any help is welcome, I can't stand to play this game which really looks fun !
Edit: I found something : if I start the game with aoss I have sound with my Audigy, but it's "jerked". I tested with my other soundcard (motherboard) and it works fine.
So I tried to play wop, but the game is really slow, I have freezes, not really playable. Someone else experiencing same problems ?
Last edited by Zanton (2007-04-29 12:59:39)Just curious, do you have openal installed ? I personally have the "generic" version installed & works fine.
my console snippet:
------ Initializing Sound ------
Loading "libopenal.so.0"...
Allocated 96 sources.
OpenAL info:
Vendor: OpenAL Community
Version: 1.1
Renderer: Software
Extensions: ALC_EXT_capture AL_EXT_capture AL_EXT_vorbis AL_LOKI_quadriphonic AL_LOKI_play_position AL_LOKI_WAVE_format AL_LOKI_IMA_ADPCM_format AL_LOKI_buffer_data_callback ALC_LOKI_audio_channel
Sound initialization successful.
Just checked the AUR build & it dosen`t have openal as a dependency, but would need it to run snd in openal (there is an option for openAL sound, from the games sound menu)
If it still fails after installing openal, have you tried the known q3 linux sound issues ?
Googles;
http://www.linuxquestions.org/questions … hp?t=24881
http://www.linuxquestions.org/questions … p?t=260975
lots more round on net, but ioquakes shouldn`t have those issues as the engine now supports openal.
Anyways good luck
Maybe you are looking for
-
SID 0 error when updating InfoCube
I was trying to load data from a flat file (.csv) into an InfoCube in BW and I got the following error message: Could not enter feature with SID 0 into table /BI0/SRT_SEAYR. I ran tests on the 0RT_SEAYR characteristic but all of them were successful
-
Can't open my hotmail on the X10 mini pro
Hello,i have changed my password on my hotmail account on the pc,and now i can't open my account on my X19 mini pro. i check on my account in the X, nothing helps it still giving vertification fold check username-password. Got somebody the answer??
-
Logic 9.0.0 is not workig on OS 10.8 what to do?
Hi! I just upgraded my OS to 10.8 and somehow logic 9.0.0 stop working on my mac it seems to be a problem with PowerPC. When I want to run logic it says that I can't use this version of logic with OS 10.8 what to do I need your help guys.
-
Can the ipad mini make calls to a mobile phone other than a iphone.
Can the ipad mini be used to make calls to any mobile phone.
-
I'm having this same issue- it's not crashing constantly but definitely freezes or chugs slowly along. Getting the "After Effects[717]: -[NSMenu menuID]: unrecognized selector sent to instance 0x610000263180" Thoughts?