No sound over HDMI, picture works fine but in sound manager tells me HDMI not connected

Hi There
I have a tm2 1050ez and am experiencing problems with my HDMI port.
When I connect it the display automatically gets duplicated and everything works fine, but when I try to play a movie with vlc for example I do not get any sound through the TV, only on the tablet.
Of course I went into the sound manager because I suspected that you must tell the tm2 where to play the sound, but to my surpise it said that the HDMI cable was not connected?
I therefore could not make any changes to the default output device...
Even in the IDT application wants to tell me that the HDMI cable is not connected. I have plugged and unplugged it several times to no avail.
I hope someone can help me on the above, I already searched the net for several hours but havn't seen a similar problem, with the most problems it does show the cable as conneted..
Thanks in advance!
Geen
This question was solved.
View Solution.

I have same issue as reported by another board member.
I've HP DV4t 1300 laptop with Vista 64bit  with service pack 2. I upgraded all drivers and everything is upto date.
On awaking from sleep/hibernation AUDIO is screwed up on LCD connected via HDMI. No matter what I do if I make my computer sleep/hibernate and then connect LCD I'm unable to get audio working.
Help from technician will be appreciated. Technician can reporduce issue as I mentioned.
Thanks,

Similar Messages

  • Can you charge a macbook by any other means than the power cord? For example the usb drive? My cord works fine but the outlet on the laptop is not.

    Can you charge a macbook by any other means than the power cord? For example the usb drive? My cord works fine but the outlet on the laptop is not.

    The only way to charge a MBP is with a MagSafe power supply (wall or airline) try http://support.apple.com/kb/TS1713

  • I have installed photoshop illustrator on mac which is working fine but update online is grew out and not able to update

    i have installed photoshop illustrator on mac which is working fine but update online is grew out and not able to update

    Hi Team,
    The option to disable to update is chosen by your IT admin when he created the package.
    The IT Admin can re-enable the update by following the link below:
    Disable auto-updates | Application Manager | IT administrators
    Cheers!
    md

  • Stream is working fine But no sound

    I have a nissue of sound too
    I am using TV CARD to make stream and voice is working well when I watch any channel on TV card software .
    When I try to make stream using media encoder. I am getting vidoe but No voice. Flash media encoder is showing the voice lights are blinking as well.
    but on stream page there is no voice
    I am using, build in sound card
    Any one has any suggestion how to fix this ? as vidoe is working well this confirm that I have a RAW Card
    Thanks

    there is no reason to use 3 i can go for latest one and try it today.
    let me tell you again what I am using.
    i am using a simple TV CARD in PCI Slot
    it is working fine with TV card software and it did not ask for additonal cable etc and voice is working fine.
    I have bulid in sound card
    For FMS ETc, I also put an additioanl cable from TV CARD Audio/Vidoe to Sound card
    Could you recommnd some TV  Card shoudl I Use ?

  • Hi, when I download wmv video files, I cannot get any sound. Youtube videos work fine but not wmv files? can somebody help please

    Hi, when I download wmv files on my MacBook Air I cannot get any sound on the videos. Youtube videos work fine but not wmv files. Can anybody help please?

    Install Flip4Mac which allows you to play wmv files.

  • Skype is not working on my mac book pro. Initially it was working fine but from a week ago it is not opening. It always shows error when I perform reopen it does not do any thing. I am using apple express for wifi.

    Hi,
    I recently bought mac book pro. I installed skype application on it and initially it was working fine but from few days it is not opening the application, showing some error.... Can you please help me to solve this problem.
    bye
    Harminder Singh

    harminder@apple  -  any luck?    Try this,  open Finder and  press command-shift-G and copy and paste: 
    ~/Library/Application Support/Skype
    In this Skype folder: delete the file shared.xml  and restart Skype.
    See if this helps.

  • Equium M50 series, sound devices "working fine" but no sound at all.

    I've seen tons of posts on this topic, and yes, the devices are properly installed, there are no driver conflicts and I have checked the manual volume control on the front of the laptop. The sound used to work fine and suddenly, nothing's happening.
    Can someone help before I break this thing please?

    Thanks for your help, but unfortunately it was to no avail.....
    Plugging headphones in works fine, which suggests i may have damaged both speakers, but hell, I'm getting a Macbook Pro soon anyway, 'cos this laptop is pretty **bleep** useless at doing anything I need it for.
    And no, I am not running Vista, and thankfully (because of the nearing purchase of a Mac) never will need to. It's Microsoft's biggest mistake.
    Thanks for the help anyway!

  • All of a sudden my iPhone 4 stopped giving out sound... I can change d ringtone n speaker works fine but no sound for incoming calls... No click sound... No keyboard sound...

    my iPhone 4 stopped giving out sound..

    On the left side of the phone above the volume + and - buttons there should be a toggle switch (silence switch) if you see orange/red that means your iPhone is in vibrate mode and will be quiet.
    Switch the toggle so it shows no orange/red and that should correct the issue.
    If you still get no sound after that you may want to check your bluetooth to make sure its not connected to another device (sound is being sent there) ...
    If that doesn't work, stick some headphones into the headphone jack and see if you can hear the sounds from the headphones... the device may also think there is headphones plug'd in which can also be the issue
    If the issue persists past that explore the option of restoring the device from the last time it did make sound and if that doesn't work you may need to contact Apple for other options
    Hope this helps!
    GL!

  • Verizon toolbar was working fine, but ff was updated and i'ts not showing up, even though it's there?

    i had the verizon toolbar working fine, until ff came out with the latest update. There is a strip within the toolbar where it once was (where i could access it). It's saying it's abled (not disabled). What gives? i contacted verizon and they said it may have something to do with active x?

    captainmarco,
    Have you considered saving your webmail logon page, and then using that bookmark when you want to go to webmail?

  • Regarding iMessage.  Was working fine but now it says the recipient is not registered. So it will not send the message.  But the person is registered.  Could send them a message yesterday.

    iMessage working yesterday.  Now it says the recipient is not registered and will not deliver message.  But they are registered.  Any suggestions?

    OK.  Going to accept for now that it is a server problem.  Hate waiting though. Grrrr.

  • Deployed 2012 R2 NPS for wireless 802.1x Workstations work fine, but iPhones state that the SSL is "not verified" when connecting to the network.

    NPS server is a 2012 R2 in a fresh domain. I'm using a Go Daddy standard SSL. I emailed myself all the GoDaddy Root and intermediate certs that I could find and installed them on the iPhone but I still get the "not verified" after entering the
    username and password. Once I click Accept, I'm able to connect just fine to the wireless network.  Will a Go Daddy cert not work or am I missing something else here?

    Hi,
    From my point of view, to figure out this issue, we need to find out how does iPhone validates the certificates chain.
    Due to this issue is more related to iPhone, to get better help, please post your question on the iPhone forum below,
    https://discussions.apple.com/community/iphone
    Best Regards.
    Steven Lee
    TechNet Community Support

  • I have Powersuite from Uniblue, and the other segments work fine, but DriverScanner, though it does the scan, cannot connect to Uniblue to get the updates

    Uniblue have advised checking proxy settings and firewall (plus uninstalling, reinstalling)but nothing gets it to work. Any ideas how to progress?
    I'm running Microsoft Vista 32 on an Aspire laptop 5610Z.
    I have the same proxy settings in Firefox (which I normally choose to use) and in Internet Explorer (which I find some software chooses to use behind my back!).
    The firewall I've checked up on is that in Control Pannel (Panneau de configuration since I'm using a French machine). Should I be checking on firewalls elsewhere?
    DriverScanner should be checking drivers against a list in Uniblue (I go to uniblue.com) then downloading the updates I need.
    I used to know what my computer contained and how it worked, back in the 80s, but I have to admit I am now lost!

    Someone recently noted a problem staying logged on the Huffington Post since it became connected with AOL. The workaround for that is to change your connection setting here:
    orange Firefox button (or Tools menu) > Options > Advanced > Network
    Click the "Settings" button and choose either "No Proxy" or "Use System Settings" option, and OK the change.
    Not sure whether Washington Post could be affected by that same setting.
    In reviewing your extensions, I'm puzzled that you have both DoNotTrackMe and SavvyConnect. The first one seems to aggressively block certain communications with websites (potentially affecting functionality) while the second one seems to report on your browsing habits (they better pay well is all I can say). Have you tried disabling both of those to see whether that has any effect?
    orange Firefox button (or Tools menu) > Add-ons > Extensions category

  • Cannot refresh table - test connection works fine but refresh gives "We couldn't refresh the connection. Please go to existing connections and verify they connect to the file or server." error.

    I'm having some difficulty updating a table in my powerpivot data model. The data for the table is stored in a local excel file; if I go to
    Existing Connections select the connection and do a test then everything is successful. When however I try to refresh that particular table I get the following error:
    "We couldn’t refresh the connection. Please go to existing connections and verify they connect to the file or server."
    In the past I had this and it was an authentication issue, the files are stored on SharePoint and I wasn't logged in to Sharepoint - I have however checked this and it can't be the issue because I have other tables linked to other excel files in the same
    location that are refreshing without issue. Can anyone think of what may be causing it?
    I have even tried creating a new local excel with the same data, added it to the data model and then tried a refresh and I I get exactly the same issue. 
    Are there any known issues with refreshing data from an Excel file if, after the initial import, you add columns to the table in the excel file I was wondering if this might contribute?
    Thanks

    Hi Maracles,
    Thanks for your post.
    From your description, I tried to reproduce this issue on my test environment. However, everything is fine for me. Could you please post the specific version of SQL Server PowerPivot for Excel?
    You can try to use a trace file to troubleshoot errors in PowerPivot. If this issue still persists, please try to reinstall SQL Server PowerPivot for Excel to see if this helps.
    For more information, please see:
    PowerPivot Options & Diagnostics Dialog Box:
    http://technet.microsoft.com/en-us/library/gg399091.aspx
    Using a Trace File to Troubleshoot Errors in PowerPivot:
    http://www.sqlchick.com/entries/tag/powerpivot
    Best Regards,  
    Elvis Long
    TechNet Community Support

  • I export an ACCESS table to an existing Excel file. Seemed like it was working fine, but now I see that it DOES NOT clear the file first.

    Thus - if I transferred 10 records last time, and there are only 6 to transfer this time, it replaces records 1 thru 6 in Excel, but LEAVES records 7-10 in the Excel file ?? 

    When you export the access Table to an existing excel file ,you should get the message like the screenshot below:
    If you click 'Yes' ,a new workbook will created ,the problem you mentioned doesn't exist.
    Maybe you can try to export data within Excel. On the Data Tab->Click
    From Access->choose the database file, then when you update your database in Access, these data will updated automatically.
    Wind Zhang
    TechNet Community Support

  • HT201210 I upgraded from iPhone 3G to 4S a few days ago. I choose the option to restore from my last 3G backup. It worked fine but I just realized that I do not have the new apps which come with the 4S. What should I do? Thanks for any help. Léo

    I upgraded from iPhone 3G to 4S a few days ago. When setting up the new 4S, I choose to restore my last 3G backup. It started by updating the OS to version 5.1 (9B179) then restored my apps and setting. Everything went well except that I realized I do not have the new apps which come with the 4S, like FaceTime, HD video and Siri.
    What should I do to correct this?
    Thank you in advance for any help on this.

    Ah, FaceTime is not an app, either. It's accessed by tapping the FaceTime button when you are in the contacts app and have selected a contact. This can also be done from the Phone app under the Contacts tab, or during a call, you can switch to FaceTime.
    Let me know what other apps/features you are missing.

Maybe you are looking for

  • DAC error while assembling custom subject area as Assembly Persistence Err

    Hi Gurus I created a custom task using custom tables. And registered the same in infa and dac as well and then created a custom subject area and then tried assembling the same with a single custom fact got the following err. can anyone help me out of

  • Upgrade to iTunes 11 has disabled Manually Manage Music option

    After upgrading to iTunes 11, it has now removed the option to 'Manually manage music' when I connect my iPhone (4S). Previously I manage all my playlists and keep them up-to-date, but found this morning I now cannot add anything to the phone,,, Each

  • Release Procedure of Purchase Requisition

    We are trying to configure the release strategy of purchase requisition with classification system.  Following field are included in the release strategy: document type, creation indicator, requisitioner, item category, purchasing organization and to

  • Creating a copy of an existing JTable that does not have source code.

    Hi I am working on a java swing based application. We used a third party API for JTable for showing some data in a table format and also for printing function. As of now print button is printing the whole table being shown in the application. Our new

  • Security on Employee Parent Child Dimension with SCD 2

    Hi I am looking for a solution for how to get all child members of a Parent employee including the one in the history. I tried multiple ways the problem which I am facing are Scenario 1: When I am using this approach, since the Employee with 'Jump' a