No style applied when using light framework and WPC content

Hi,
Iu2019m facing a strange behavior, and Iu2019m almost pretty sure that is an error in the WPC, but I decided to post it here, maybe someone can confirm it. When using both, Light Framework and WPC, for some reason, the text inserted in the WPC containers, using the Web Forms, doesnu2019t appear correctly (no style/font applied), but viewing the same information, using the Default Framework Page, it works correctly.
Any hint?
Thanks and Regards,
John

Hi,
The reason why I decide to use Light Framework, itu2019s because Iu2019m creating an EFP, and Iu2019m using the WPC to publish the content (articles, news, and link list), using the standard Web Forms.
The problem is, after adding to a WPC Page something so simple like an article (using the Web Form Article), no Portal iView, HTMLB or other stuff included, the preview of the WPC Page using the Default Framework Page is ok, but when using the Light Framework Page, the text in the article doesnu2019t have the correct font-family. It looks like there are some styles missing in the Light Framework Page, that WPC content is expecting.
Thanks and Regards,
John

Similar Messages

  • Add to favourites disabled when using light framework page

    Hi,
    When using the light framework page our "add to favourites" link is disabled. If we instead use the normal framework page add to favourites in the dropdown menu works. Does anyone have an idea why this could be?
    Regards
    Mattias

    Hi,
    The reason why I decide to use Light Framework, itu2019s because Iu2019m creating an EFP, and Iu2019m using the WPC to publish the content (articles, news, and link list), using the standard Web Forms.
    The problem is, after adding to a WPC Page something so simple like an article (using the Web Form Article), no Portal iView, HTMLB or other stuff included, the preview of the WPC Page using the Default Framework Page is ok, but when using the Light Framework Page, the text in the article doesnu2019t have the correct font-family. It looks like there are some styles missing in the Light Framework Page, that WPC content is expecting.
    Thanks and Regards,
    John

  • Weblogic 9.2 error when using spring framework and taglibs.

    I am getting the following error when using spring binding for a command form class.
    Class ExCommandForm
    private String firmCode;
    public String getFirmCode ()
    public void setFirmCode ()
    In my jsp I have the following
    <spring:bind path="exCommandForm.firmCode">
    <input name="<c:out value="${status.expression}"/>" type="text" value="<c:out value="${status.value}"/>" >
    </spring:bind>
    Ps. exCommandForm is the commandForm declaration in my SiimpleFormController.
    When I deploy the application to weblogic 9.2 I get the following error :
    <Apr 26, 2007 4:34:44 PM BST> <Error> <HTTP> <BEA-101017> <[weblogic.servlet.int
    ernal.WebAppServletContext@1f601c6 - appName: 'BDRui', name: 'BDRui', context-pa
    th: '/BDRui'] Root cause of ServletException.
    java.lang.ClassCastException: javax.servlet.jsp.jstl.core.LoopTagSupport$1Status
    at jsp_servlet._web_45_inf._jsp.__tradesearch._jspService(__tradesearch.
    java:1075)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run
    (StubSecurityHelper.java:225)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecuri
    tyHelper.java:127)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
    a:283)
    Ps. Deploying application on Tomcat 5.23 works.
    Can anyone help on this ?
    cheers in advance.
    More Info - Using Weblogic 9.2 on UNIX, servlet 2.4, jstl 1.1
    regards
    Edited by kings_citi at 04/26/2007 9:03 AM
    Edited by kings_citi at 04/26/2007 10:35 AM
    Edited by kings_citi at 04/26/2007 10:36 AM

    The problem doesn't look like it has anything to do with wappers per se. The stack indicates that the JVM died when the persistent store tried to invoke a standard Java synchronize operation. JVM crashes need to be analyzed by a JVM expert, so I second the suggestion to solicit help from JVM experts and/or filing a case with customer support. In the mean-time, you can probably work-around the issue by either (A) ensuring you have a recent version of the JVM installed, or (B) temporarily switching to the Sun JVM.
    Regards,
    tom
    Edited by: TomB on Sep 17, 2010 2:33 PM

  • Customizing Light Framework and desktop

    We have an internal need for using the light framework and desktop.  I don't like to modify the SAP provided items but instead would rather create delta links and modify those. 
    I created a delta link of
    -Light Desktop (contains my CSS and my light framework page)
    -Light FrameworkPage
    -Light Detail Navigation (changing the start at navigation level to 1)
    -Searched and found the Light Detailed Navigation Page did a delta link copy and then modified it
    Modified the delta link copy of the Light Framework Page
    Here's the rub - I'd like to modify the Light Desktop Innerpage.  I'm hitting the wall here.  I created a new page but the layout needed (Light Navigation Panel & Content Area Layout) doesn't show.  Can't find the Light Desktop Innerpage in the portal content (it's there via the properties of the framework page - but finding that page I can't seem to find it.
    So - how do I create my own desktop innerpage (would like to base it on light desktop innerpage)?
    Regards,
    Diane

    Hi
    The par file for Desktop inner page is com.sap.portal.innerpage
    http://help.sap.com/saphelp_nw04/helpdata/en/b4/771158e4cb4bf6af9974380948db86/frameset.htm
    The desktop inner page is on of the iview present in DefaultFramework page of Portal which is a single portal page containing default iViews and pages.
    The default framework page supplied with SAP NetWeaver Portal provides the navigational and structural components required to navigate and operate the portal. we can modify the default framework page or create our own framework pages to meet the requirements.
    Its Location in Portal Catalog: Portal Content -> Portal Users -> Standard Portal Users -> Default Framework Page (pcd:portal_content/every_user/general/frameworkpage)
    Regards
    Sat

  • My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

    My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

    <http://www.thexlab.com/faqs/sbbod.html>

  • After I installed the recent Apple security patch, I can no longer save PDFs when using Safari. And Firefox no longer can open website PDFs. Any suggestions?

    After I installed the recent Apple security patch, I can no longer save PDFs when using Safari. And Firefox no longer can open website PDFs. Any suggestions?

    Dansyacht wrote:
    If the previous Safari suggestion doesn't work try the following:
    In Finder, go to Macintosh HD/Library/Internet Plug-ins and move AdobePDFViewerNPAPI.plugin to the Disabled Plug-ins Folder.  Restart Safari.  If this works you may just want to delete that FUBAR plug-in.
    Thanks.  This was the solution for me.
    Message was edited by: tvdowntown

  • In Firefox 3.6.10 I was able to go forward and backwards between pages without the page defaulting to the top of the page. Is there any way to prevent the page from automatically moving to the top when using the forwards and back buttons in Firefox Four?

    I like to be able to navigate backwards and forwards without having to scroll down and find where I was previously. In Firefox Four, when using the forwards and back buttons, the page will automatically return to the top of the page. Is there any way to change this setting in Firefox Four to prevent it from doing that?

    Thanks for the response. No Time Machine, but I probably have a backup from a few months ago on an external hard drive. :/ I guess it'd have useful history, but not if it overwrote the last 3 months or so of Awesome Bar, that might not be so great.

  • Performance issues when using Smart View and Excel 2010

    Hello, we are experiencing very slow retrieval times when using Smart View and Excel 2010. Currently on v.11.1.3.00 and moved over from Excel 2003 in the last quarter. The same spreadsheets in 2010 (recreated) are running much slower than they used to in 2003 and I was wondering if anyone else out there has experienced similar problems?
    It looks like there is some background caching going on as when you copy and paste the contents into a new file and retrieve it is better.....initially. The size of the files are generally less than 2mb and there aren't an expecially large number of subcubes requested so I am at a loss to explain or alleviate the issues.
    Any advice / tips on how to optimise the performance would be greatly appreciated.
    Thanks,
    Nick

    Hi Nick,
    Office 2010 (32 bit) only is supported.
    Also check these documents:
    Refresh in Smart View 11.1.2.1 is Slow with MS Office 2010. (Doc ID 1362557.1)
    Smart View Refresh Returns Zeros (Doc ID 758892.1)
    Internet Explorer (IE7, IE8 and IE9) Recommended Settings for Oracle Hyperion Products (Doc ID 820892.1)
    Thank you,
    Charles Babu J
    Edited by: CJX on Nov 15, 2011 12:21 PM

  • "Could not complete scan" error when using Windows Fax and Scan

    "Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
    Printing is fine.
    When using the HP Scan application, get the error "Scanner communication cannot be established".
    When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
    "The scan could not be completed due to one or more of the following issues:
    Connection to the computer is lost
    The scanner is in use
    OCR application is not installed"
    My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
    Originally ran Windows 8.0; recently upgraded to Windows 8.1.
    Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
    There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
    On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
    I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
    The printer has a static IP address;
    Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
    Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
    The printer has been plugged directly into the power socket.
    With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
    Appreciate any insights into this problem.
    I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
    Any ideas?
    regards,
    Motorbike

    You can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible.  If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
    Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC . 
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en​...
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Where are my designs stored when using Adobe CC and can i access them if i cancel ?

    where are my designs stored when using Adobe CC and can i access them if i cancel ?

    This is answered in the CC FAQ: http://www.adobe.com/products/creativecloud/faq.html

  • HT204291 When using my iPad and playing videos, I only hear the sound. Why will it not show the video?

    When using my iPad and playing videos, I only hear the sound. Why will it not show the video?  My iPad 2 and iPhone 5 work no issues.

    Hi sheilafrommannford,
    Welcome to the Support Communities!
    The articles below may be able to help you with this issue.
    Click on the links to see more details and screenshots.
    Using AirPlay
    http://support.apple.com/kb/HT4437
    Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS4215
    Cheers,
    Judy

  • If i dont use the display when using the GPS and only listen to the voice instructions can that also makes the iphone overheat even if you dont use the display

    because when i use the gps app in my iphone 4s in the car my iphone gets overheat so
    if i dont use the display when using the GPS and only listen to the voice instructions can that also makes the iphone overheat even if you dont use the display
    will that help?

    When you use your GPS does your iPhone get hot enough to shutdown?  The reason I ask is that I have run my GPS app with the screen brightness set to near max connected to power for hours.  My iPhone got hot, but didn't shutdown.

  • Cannot download aperture when using trial version and all photo work will be lost if delete trial version

    App Store will not download aperture when using trial version and all 30 days of photo work will be lost if delete trial version to be able to purchase Aperture download version???  any ideas?    

    Your Aperture library is not deleted when you delete Aperture from the Applications folder. Neither are your settings BTW.
    Do make certain your library is backed up!

  • I am used to "drag and drop" content from my computer to my old i-pod.  With the new i-tunes, I can't seem to do that.  Any suggestions?

       I am used to "drap and drop" content from my computer to my old i-pod.  With the new i-tunes, I can't seem able to do that.  Any suggestions?  Thanks.

    diana42 wrote:
    My problem is that Itunes does not acknowledge inserted CD in DEVICES area,
    Are these Audio CDs?
    Only Audio CDs will show up in iTunes.
    This is new to me because I am used to importing and making copies from my playlists.
    I don't follow. Would you explain this a bit more?

  • Light framework and custom iViews

    Does anyone know why the "heavy" framework is used on custom iViews?  We have developed several custom iViews and when we tested them in the light framework, they always pull down the "heavy" framework Javascript.  I created a very simple Hello World iView without HTMLB and without a sharing reference to HTMLB and yet, when it is displayed, all of the heavy framework Javascript gets pulled in?

    Hi Timothy,
    Generally custom iviews are built using portal components which use HTMLB or using webdynpro.If this is the case, then the htmlb js and css files will be loaded, and these files are massive.
    Also using KM iviews will results in making the framework "heavy".
    As rightly pointed out above you should make sure that all the components in your page are having an EPCF level 0(This level generates no JavaScript or Java applet framework functions)
    Check the following <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/ce/3e98408d953154e10000000a1550b0/frameset.htm">link</a> for info on Enterprise Portal Client Framework(EPCF) which is basically used for client side eventing.
    You could use some tracing/logging software like HTTP Watch or Webscarab to see what content is actually causing this high network load. Also check if all content is delivered with caching directives so that they will not be reloaded on every subsequent request.
    P.S:Reward points if useful.
    Regards,
    Abhishek.

Maybe you are looking for

  • Versions for ECC 5.0

    Hi , We are going to implement ESS MSS in ECC 5.0 and EP is 7.0 Please guide me versions for SPs,Business packages,EA-HR,Java stacks etc any other things if i need to do. I am not sure about this.Can anyone guide me. Thanks , Usha

  • DB Characterset Problem

    Dear All, Please let me to know how to find the current database characterset. Please also advice me how to change db charset, pre-requesits and its steps. I will be very thakful to you all. Aqeel Nawaz

  • MRP list: collective requirements (MD06) in the background mode

    Hi Friends, We have requirement to run MRP list: collective requirements (MD06) in the background mode per MRP controller. Is there any way we can run MD06 in the background? Appreciate your response. Thanks, Srinivas

  • Streaming multi bit rate and single bit rate

    I'm trying to simplify my setup.  Sometimes I need to stream multi bit rate and sometimes I need to stream single bit rate.  This is due to the internet connections I'm sending from sometimes have poor upstream and multi-bit rate is too much bandwidt

  • Exception for database connectivity

    I am executing a procedure that calls some functions that get data over a dblink. Now I want to add some code to check for database availablity etc upfront in my procedure before calling the function and raise exception and end it. I was thinking of