No Sun application server installes

I've installed java sun studio creator but because of i've to use a proxy to go in internet, installation program didn't install the application server. Someone knows flags or parameter that i've to use to indicate to the installation program the proxy and his port

What is the platform that you're trying to install on? Also, have you gotten a chance to visit this FAQ page:
http://sonntag.red.iplanet.com/prodtech/javatools/jscreator/reference/faqs/index.jsp
If you have and still have trouble getting further. Can you post your $InstallDIr/install.log? and $installDir/system/install.properties?

Similar Messages

Sun Java System Application Server installation location on windows

Hi there...
I'm just doing the "Your First Cup: An Introduction to the Java EE Platform" tutorial for the first time. I'm trying to add the Sun Java System Application Server in NetBeans IDE. It's asking me to select the Platform Location, and I have no idea where that is. No help instructions I've found say where it normally gets installed, and I've found now mention of it on the web.
Can anyone tell me the location where this is supposed to be located? I HAVE installed the Java EE SDK 5 for Windows. The location it offers as a default is "C:\Program Files\glassfish-v2ur2\", but there is a red message at the bottom of the dialog that reads "Provide a valid Application Server Installation Location for 'Sun Java System App...". The Register Local Default Domain drop-down box has not options to select, either.
I would try and search some more, but I just don't know what to search for. If anyone can offer any insight into this, I appreciate it.
Thanks a ton!!!
Orion Carrier

I`ve posted a shorter version of the question in the hopes of getting a timely answer. Thanks

Sun Application Server 9.1_02 + Sun RFID Software 3.0 + Postgres8.3?

Hi all
I am working on some RFID-related project. I need to capture, fiter and then perform some other tasks on the data sensed by RFID readers, all in Java. So I choose Sun's software. There was no luck when I was trying to configure my system to work with Sun's software. Hope you experienced could do me a favor and help me out. Thanks in advance. Here are details.
In the installation guide of Sun Java System RFID Software 3.0, it says, to install RFID information server, Sun Java System Application Server Platform Edition 8.1 2005Q2 UR2 and PostgreSQL 8.0.4 are needed.
For the following 2 reasons:
1 PostgreSQL 8.0.4 is now not available to download on www.postgresql.org;
2 I think later version of PostgreSQL or Sun Application Server should be compatible to their earlier versions
I tried the following combination other than those stated in the installation guide:
1 PostgreSQL 8.3;
2 Sun Java System Application Server 9.1_02, bound with Sun Java Application Platform SDK Update 5;
3 Sun Java System RFID Software 3.0
Then, the application server successfully communicates with PostgreSQL, demonstrated by "ping success" through the connection pool built in application server's admin console.
The RFID information server communicates successfully with PostgreSQL, demonstrated by deploying RFID information server database successfully in PostgreSQL.
But, instructed by the installation guide, when I tried to validate my RFID information server installation by typing "http://localhost:8080/epcis" in the browser, the application server reported "the resource is not available".
I looked into many other internet resources and instructions about this, but no luck at all. I am now really, really stuck. Hope you could do me this favor. Thanks.
PS:
1 PostgreSQL8.3 is available on http://www.postgresql.org/download/
2 Sun Java System Application Server is available on http://java.sun.com/javaee/downloads/index.jsp
3 Sun Java System RFID Software and the installation guide are available on https://sun-rfid.dev.java.net/SJS_RFID_Software.html
4 Operation System is Windows XP

Would be a great idea to open-source the Sun RFID project, since the project is inactive over the last tree years.
Seems that this project have a great architecture, but the techonolgy is outdated ...
We have another open source initiave (google for Aspire RFID), but seems that this project still imature ...
Comercial options includes ALE Server, and Sendra Solutions (but I didn't evaluated these)
Mario Prado-Brazil

Installing Sun Application Server 8.1 on Win2k3 Fails

Hi,
I have tried several times, 8 or more, to install Sun Application Server 8.1 on Win2k3 Server Standard Edition sp1. However, the install places the relevant files onto the disc only to remove them.
The archive I am using is java_es_05Q1_appserver-windows-x86.zip.
I have jdk1.4.2_06 installed however, the installer installs JDK1.5.0.
The only message I receive is displayed in a window:
The wizard was interrupted before Sun Java Enterprise System could be completely installed
Pls Help.
Regds

Hi,
Java ES 2005 Q1 is not supported on Windows 2003.
Please use Java ES 2005 Q4 release.
If you still encounter problems, please provide the following details
- What type of configuration did you choose?
- Was there a Summary.txt file created where you installed Java ES?
(need to see contents of that)
- JDK1.5.04 is required so it is correct behavior that installer is placing that on your disk - further installation will not do this.
- Installation log can be found at
%TEMP%/SunJavaES.log
Reference: Troubleshooting chapter of Install guide.
http://docs.sun.com/source/819-1652/troubleshooting.html#wp999001
Hi,
I have tried several times, 8 or more, to install Sun
Application Server 8.1 on Win2k3 Server Standard
Edition sp1. However, the install places the relevant
files onto the disc only to remove them.
The archive I am using is
java_es_05Q1_appserver-windows-x86.zip.
I have jdk1.4.2_06 installed however, the installer
installs JDK1.5.0.
The only message I receive is displayed in a window:
The wizard was interrupted before Sun Java Enterprise
System could be completely installed
Pls Help.
Regds

The existing Application Server Installation is corrupted

Well I downloaded the Java Studio Creator and wanted to test it on a Debian GNU/Linux box. See what happened while installing it:
http://people.freenet.de/jtocancipa/jsc2_install_bug_debian.jpg
http://people.freenet.de/jtocancipa/install.log.gz
Not nice, unfortunately I don't have the time now to debug the shell script inside the creator-2-linux-en.bin file, so if anyone knows how to fix this... thanks in advance.

Hi,
I am having the same problem on a Gentoo installation. At the end of installation I get the error
- The existing application server installation is corrupted I have installed both as root and a normal user.
The ~/sun/Creator2_1/SunAppServer8 directory is empty and I can't use _unist/unistall.bin as it complains about being unable to stop the server.
The install log gives these errors:
(18-May-2006 04:07:32), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, Installing Application Server...
Checking available disk space...
Checking Java(TM) 2 Runtime Environment...
Extracting installation files...
Launching Java(TM) 2 Runtime Environment...
Deleting temporary files...
exitcode = 64
(18-May-2006 04:07:55), Setup.product.install, com.sun.installer.InstallApplicationServerAction, err,
Error occurred while installing [64] -> /home/stanwayg/sun/Creator2_1/_uninst/install.sh /home/stanwayg/sun/Creator2_1/_uninst statefile ../install.log /home/stanwayg
(18-May-2006 04:07:55), Setup.product.install, com.sun.installer.InstallApplicationServerAction, err,
Error occurred while Installing Application Server....
(18-May-2006 04:07:55), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, Finished
(18-May-2006 04:07:55), Setup.product.install, com.ibm.wizard.platform.linux.LinuxProductServiceImpl, msg1, installing Post Install Core Action (PostInstallCoreAction)
(18-May-2006 04:08:05), Setup.product.install, com.sun.installer.PostInstallCoreAction, err, Unable to modify file: stopserver.ksh
(18-May-2006 04:08:05), Setup.product.install, com.sun.installer.PostInstallCoreAction, err, Unable to modify file: startserver.ksh
(18-May-2006 04:08:05), Setup.product.install, com.sun.installer.PostInstallCoreAction, err, Unable to modify file: ij.ksh
(18-May-2006 04:08:05), Setup.product.install, com.sun.installer.PostInstallCoreAction, err, Unable to modify file: sysinfo.ksh
(18-May-2006 04:08:05), Setup.product.install, com.sun.installer.PostInstallCoreAction, err, Unable to modify file: sysinfo.ksh
(18-May-2006 04:08:05), Setup.product.install, com.sun.installer.PostInstallCoreAction, err, Unable to copy DataDirect drivers
(18-May-2006 04:08:05), Setup.product.install, com.sun.installer.PostInstallCoreAction, err, Unable to copy driveradapter.jar
(18-May-2006 04:08:05), Setup.product.install, com.sun.installer.PostInstallCoreAction, err, Unable to copy appserv-env.jarI re-downloaded the installation file and still get the problem. Is there a solution to this?
Regards
GWS
I've been trying further to get this to install and I have found that it is actually the SJSAS installation that is the problem.
If I try to install SJSAS using any route (bundled with Netbeans, bundled with Creator or on its own) the installation fails.
If I try ot install using the freestanding SJSAS installler I get errors about their being insufficient disk space even though there is plenty of room (250Gig).
But still not much closer to getting it working.

How to keep up to date with Sun Application Server 9.1

Hi All: I'm just starting out deciding between Tomcat and Sun Application Server 9.1. Is there a patch number on SunSolve so I can keep the product up to date with any fixes?
Any comments on which way to go for this for .war applications that do not have EJBs?
Thanks,
Rich

Hello,
recently I upgraded from Sun AppServer 9.1 U1 to U2. I downloaded Glassfish V2 U2, what is equivalent to AppServer 9.1 U2. Installing this download there is an option to upgrade the domain of an existing installation of the AppServer.
This worked pretty well.
Bernd

What is the default password for admin on Sun Application Server?

Hi all,
What's the password?
I've tried "adminadmin" but it didn't work.
And where can I set/change the password. I couldn't find those information in the docs which come with the JDK.
Thanks in advance.

There is no default password - you were asked to specify password during the Application Server installation.
You can either uninstall and reinstall application server and make note of the password you are entering during the new installation, or try to reset password as specified here:
http://java.sun.com/j2ee/1.4/docs/relnotes/troubleshooting.html#1026910
(note that this document is specific to J2EE SDK/Platform Edition of the Application Server and may not work with Standard/Enterprise Edition).

JBoss 4 to Sun Application Server...where to start

Hi there...
I'm charged with making sure my company's product, which has mostly been running on JBoss, works w/ Sun Application Server.
I've been trying to use the Migration Tool with poor results...I know some of it is because it's for JBoss 3 and not 4....
giving it the entire .EAR for our product tells me that it doesn't handle webservices...diving into the EAR's JAR containing our services and removing webservices.xml gives the same result of various permutations of putting in source code / xml leads , namely it runs and then freezes with
DefaultValidationEventHandler: [FATAL_ERROR]: Premature end of file.
Location:
DefaultValidationEventHandler: [ERROR]: Unexpected element {}:ejb-local-ref
Location:
back on the console I launched the UI from
To possibly oversimplify, I copied out some of the most relevant .xml we have,
ejb-jar.xml
jboss.xml
jbosscmp-jdbc.xml
jboss-web.xml
web.xml
and put them in a single directory...now the Migration tool runs, leaves most of the files unchanged, and for our ejb-jar.xml it fails, and says
Unknown error.
EjbJar is Null
Admittedly our ejb-jar.xml is handcrafted and maybe suspect, but still.
So I guess right now I'm not too optimistic about this tool.
Some of the problem is my understanding of what all goes in an EAR in terms of DD is weak. I'm trying to smarten up, but haven't found a good description of "these are the typical DD files for Sun Application Server", with examples or precise descriptions of the contents...and the migration tool doesn't get to the point where it's making some of the files i expected based on
http://java.sun.com/j2ee/tools/migration/doc/JBOSS3.0_S1AS7.html
(for example sun-cmp-mappings.xml doesn't appear anywhere in the AppServer\docs directory... )
Any pointers or advice appreciated...

There is an article, while it is for Application Server 7, it still could be useful:
http://developers.sun.com/prodtech/javatools/jsenterprise/reference/docs/jse7/jse7_jboss_plugin.html

How to configure oracle thin drivers for SUN APPLICATION SERVER

hi all,
I am working with EJB with oracle as back-end. I wants to know how to configure oracle thin drivers for the SUN APPLICATION SERVER. Please explain me breifly.
Advanced thanks to all the replies.
with regards,
/kumaraswamy.n

Kumaraswamy,
Did you try searching the Internet? Here are the results of my Internet search:
http://tinyurl.com/zo4gk
And one of the first hits in the list was this:
Deploying to a Sun Java System Application Server
Good Luck,
Avi.

How can I call a Stateless-EJB3 from MBeans in Sun Application Server 9.1?

Hi,
I have some jobs running as Timer-Service-EJB in Sun Application Server 9.1. The Timer will be startet by a Lifecycle-Modul and it works fine.
I have also some MBeans running in the same App-Server which should start or stop the Timer-Services by invoking dedicated methods
in the Timer-Service-EJB.
InitialContext ctx = new InitialContext();
MyJob job = (MyJob) ctx.lookup("ejb/MyJob");
job.startTimer();But I get the following error;
javax.naming.NoInitialContextException: Cannot instantiate class: com.sun.enterprise.naming.SerialInitContextFactory [Root exception is java.lang.ClassNotFoundException: com.sun.enterprise.naming.SerialInitContextFactory]
..... Why is it impossible to get an reference of the SerialInitContextFactory? The appserv-rt.jar is in the classpath of the Appserver ( installdir/lib ).
Following the Sun Application Server 9.1 Developer Guide, I tried to copy the dependent classes (including appserv-rt.jar ) into domain-dir/lib.
But I got the same error.
Any ideas?
Thanks,
Stefan

Hi Santanu,
You need to write SoapHandler in order to pass username and pwd. You will need 2 classes namely HeaderHandlerResolver & SoapHandler. This is how i do in in my JAX-WS clients. I generate stubs and then attach handler to webserviceinterface
PFA HeaderHandlerResolver.java and SoapHandler.java you would attach soap handler something like this in your code i have never done this via ADF so not sure.
HeaderHandlerResolver soapHandlerResolver = new HeaderHandlerResolver();
docInfo.setHandlerResolver(soapHandlerResolver);
In SoapHandler class you will mention username and pwd like this
soapMessageContext.put(BindingProvider.USERNAME_PROPERTY,"username");
soapMessageContext.put(BindingProvider.PASSWORD_PROPERTY,"pwd");
Regards,
Amol Gavali

Sun Application Server 8.1 remote deplyment database connection

I use the deploy to Remote server to deply a project to Sun Application Server 8.1. When i try to connect to the database I get connection error
javax.servlet.ServletException: javax.faces.FacesException: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Access denied for user ''@'testserver.com' (using password: YES)
it seems it doesnt pick the User from the Connection pull settings. The settings at the server seem correct.
This works fine when i deply to Application server 8.0 that comes with the Sun creator

The user is correct and it does work from 8.0/
The server doesnt pick the username from the
configuration
the error message says use '' emptyWhat "configuration" are you referring to? Do you mean the way that you have the 8.1 server set up?
Since you cannot ping, then there is something wrong with the configuration on the 8.1 server.
Why don't you remove the connection pool and start over from scratch and cut/paste the settings from the 8.0 app server over. Then make sure you can ping once everything is set up.
Also, where is the 8.1 box located? Are you sure it has access to the database that you are trying to reach?
You might try posting this to the App Server forum as it really isn't a Creator problem.

How to configure sun application server 8.2 for Oracle RAC 10g

Hello,
We have numerous boxes running the sun platform application server 8.2 and 2 boxes running enterprise version 8.2 all connecting to a 4 node Oracle RAC 10 G release 2 database. We have the system up and working. The application servers are connecting just fine to the database and the apps don't have any problems querying, inserting, etc. However, when we try to do failover testing of situations when a node or nodes of the Oracle RAC database goes down the application server does not gain new valid connections. Our configuration is this, OracleDataSource for the data source, table validation turned on with a valid table, ONS configuration set in properties, connectionCache enabled, and fastconnectionfailover enabled as well in the properties. We have that long oracle rac url with load balancing turned on set fot the database URL. We have the checkbox checked to fail all connections on any failure. ONS is configured properly within the database because we have a java application that runs outside of the application server that uses all the same settings described above (only set manually in our code for the OracleDataSource). This application works seemlessly when DB nodes are shutdown. We can shutdown all but one node and it's still humming along without skipping a beat. Start up one of the others, kill the last node, it still hums along nicely without skipping a beat. We'd really like to get the applications running in the application server to work the same way. Any help would be greatly appreciated. We've tried all the combinations that we can think of with configuration settings in the application server and it never works. Am tempted to rip out the database connection pool from inside the application server and configure it manually in the code but we are using entity beans and this is the much easier approach, if it will work. It's down to the point of does sun application server actually work with oracle RAC for connection failovers.

Hi,
We are also facing similar execption. Here is the error, we are getting, when a node is failed on RAC.
[#|2007-11-11T12:43:53.685+0000|WARNING|sun-appserver-ee8.1_02|javax.enterprise.system.core.transaction|_ThreadID=38;|JTS5041: The resource manager is doing work outside a global transaction
oracle.jdbc.xa.OracleXAException
at oracle.jdbc.xa.OracleXAResource.checkError(OracleXAResource.java:1270)
at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:318)
at com.sun.gjc.spi.XAResourceImpl.start(XAResourceImpl.java:184)
at com.sun.jts.jta.TransactionState.startAssociation(TransactionState.java:258)
at com.sun.jts.jta.TransactionImpl.enlistResource(TransactionImpl.java:181)
at com.sun.enterprise.distributedtx.J2EETransaction.enlistResource(J2EETransaction.java:397)
at com.sun.enterprise.distributedtx.J2EETransactionManagerImpl.enlistResource(J2EETransactionManagerImpl.java:312)
at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.enlistResource(J2EETransactionManagerOpt.java:114)
at com.sun.enterprise.resource.ResourceManagerImpl.registerResource(ResourceManagerImpl.java:113)
at com.sun.enterprise.resource.ResourceManagerImpl.enlistResource(ResourceManagerImpl.java:71)
at com.sun.enterprise.resource.PoolManagerImpl.getResource(PoolManagerImpl.java:176)
at com.sun.enterprise.connectors.ConnectionManagerImpl.internalGetConnection(ConnectionManagerImpl.java:268)
at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:193)
at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:122)
at com.sun.gjc.spi.DataSource.getConnection(DataSource.java:70)
at com.syntegra.nasp.etp.dax.DBManager.getConnection(DBManager.java:192)
at com.syntegra.nasp.etp.dax.DBManager.createDBCommand(DBManager.java:241)
at com.syntegra.nasp.etp.dax.DBManager.createDBCommand(DBManager.java:251)
at com.syntegra.nasp.etp.dax.sp.SPS_PRESCRIPTION_GUID_PROC.getCommand(SPS_PRESCRIPTION_GUID_PROC.java:31)
at com.syntegra.nasp.etp.dax.sp.SPS_PRESCRIPTION_GUID_PROC.execute(SPS_PRESCRIPTION_GUID_PROC.java:23)
at com.syntegra.nasp.etp.dax.PrescriptionBaseDataMapper.loadPresciptionByGUID(PrescriptionBaseDataMapper.java:203)
at com.syntegra.nasp.etp.model.PrescriptionBase.findByPrescriptionGUID(PrescriptionBase.java:176)
at com.syntegra.nasp.etp.messages.PatientPrescriptionReleaseRequest.execute(PatientPrescriptionReleaseRequest.java:120)
at com.syntegra.nasp.etp.service.ETPSLBean.processMessage(ETPSLBean.java:159)
at sun.reflect.GeneratedMethodAccessor97.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:147)
at com.sun.ejb.containers.EJBLocalObjectInvocationHandler.invoke(EJBLocalObjectInvocationHandler.java:128)
at $Proxy6.processMessage(Unknown Source)
at com.syntegra.nasp.etp.listener.RequestListener.onRequest(RequestListener.java:204)
at com.syntegra.spine.csf.consumer.mdb.CSFListenerRegisteringConsumer.onRequest(CSFListenerRegisteringConsumer.java:54)
at com.syntegra.spine.csf.consumer.mdb.CSFConsumerBase.invokeListener(CSFConsumerBase.java:267)
at com.syntegra.spine.csf.consumer.mdb.CSFConsumerBase.processMessage(CSFConsumerBase.java:180)
at com.syntegra.spine.csf.consumer.mdb.CSFConsumerBase.onMessage(CSFConsumerBase.java:102)
at sun.reflect.GeneratedMethodAccessor96.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sun.enterprise.security.SecurityUtil$2.run(SecurityUtil.java:153)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.enterprise.security.application.EJBSecurityManager.doAsPrivileged(EJBSecurityManager.java:955)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:158)
at com.sun.ejb.containers.MessageBeanContainer.deliverMessage(MessageBeanContainer.java:956)
at com.sun.ejb.containers.MessageBeanListenerImpl.deliverMessage(MessageBeanListenerImpl.java:42)
at com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:130)
at $Proxy9.onMessage(Unknown Source)
at com.sun.genericra.inbound.DeliveryHelper.deliverMessage(DeliveryHelper.java:183)
at com.sun.genericra.inbound.DeliveryHelper.deliver(DeliveryHelper.
Regards
Selvan.

JMS problem with Sun Application Server 8.2

Hi!
I've just started trying JMS and found a problem.
I set a connection factory called "QueueConnectionFactory" in the Sun Application Server Admin Consol.
After this I test this code:
import javax.jms.*;
import javax.naming.*;
public class Sun_JNDI
public static void main(String args[]) throws Exception
Context jndiContext = null;
System.setProperty("java.naming.factory.initial","com.sun.enterprise.naming.SerialInitContextFactory" );
System.setProperty("java.naming.factory.url.pkgs","=com.sun.enterprise.naming");
System.setProperty("java.naming.provider.url","localhost:1024");
jndiContext = new InitialContext();
Object O = jndiContext.lookup("QueueConnectionFactory");
System.out.println(jndiContext);
in result I got this long Exception message:
2006.02.12. 10:52:59 com.sun.corba.ee.spi.logging.LogWrapperBase doLog
INFO: "IOP00710299: (INTERNAL) Successfully created IIOP listener on the specified host/port: all interfaces/1356"
2006.02.12. 10:53:00 com.sun.enterprise.connectors.ActiveRAFactory createActiveResourceAdapter
SEVERE: RAR6001 : Class Not found : com.sun.messaging.jms.ra.ResourceAdapter
2006.02.12. 10:53:00 com.sun.enterprise.connectors.ActiveRAFactory createActiveResourceAdapter
SEVERE:
com.sun.enterprise.connectors.ConnectorRuntimeException: Error in creating active RAR
at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:76)
at com.sun.enterprise.connectors.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:267)
at com.sun.enterprise.connectors.ConnectorRuntime.createActiveResourceAdapter(ConnectorRuntime.java:189)
at com.sun.enterprise.naming.factory.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:71)
at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:293)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at Sun_JNDI.main(Sun_JNDI.java:40)
Caused by: java.lang.ClassNotFoundException: com.sun.messaging.jms.ra.ResourceAdapter
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:50)
... 7 more
2006.02.12. 10:53:00 com.sun.enterprise.naming.SerialContext lookup
SEVERE: NAM0004: Exception during name lookup : {0}
com.sun.enterprise.connectors.ConnectorRuntimeException: Error in creating active RAR
at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:76)
at com.sun.enterprise.connectors.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:267)
at com.sun.enterprise.connectors.ConnectorRuntime.createActiveResourceAdapter(ConnectorRuntime.java:189)
at com.sun.enterprise.naming.factory.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:71)
at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:293)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at Sun_JNDI.main(Sun_JNDI.java:40)
Caused by: java.lang.ClassNotFoundException: com.sun.messaging.jms.ra.ResourceAdapter
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:50)
... 7 more
Exception in thread "main" javax.naming.CommunicationException: serial context communication ex [Root exception is com.sun.enterprise.connectors.ConnectorRuntimeException: Error in creating active RAR]
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:317)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at Sun_JNDI.main(Sun_JNDI.java:40)
Caused by: com.sun.enterprise.connectors.ConnectorRuntimeException: Error in creating active RAR
at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:76)
at com.sun.enterprise.connectors.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:267)
at com.sun.enterprise.connectors.ConnectorRuntime.createActiveResourceAdapter(ConnectorRuntime.java:189)
at com.sun.enterprise.naming.factory.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:71)
at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:293)
... 2 more
Caused by: java.lang.ClassNotFoundException: com.sun.messaging.jms.ra.ResourceAdapter
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:50)
... 7 more
So I tested this code under Netbeans5 and I don't where to find jar file contains the class: com.sun.messaging.jms.ra.ResourceAdapter
Other time I tryied to lookup this URL: "java:comp/env/jms/QueueConnectionFactory"
The result was: javax.naming.NameNotFoundException
I know it is a small code example but if I'm not able to solve this problem I can't go on with JMS.
I would be glad by any help.
Regards:
Sandor

Hello
In my code it looks like that:
1: System.setProperty("com.sun.jndi.ldap.LdapCtxFactory", "iiop://localhost:3700");
2: Context ctx = new InitialContext();
3: TopicConnectionFactory factory = (TopicConnectionFactory)ctx.lookup("jms/DailyDestinationFactory");
4: TopicConnection connection = factory.createTopicConnection();
5: TopicSession session = connection.createTopicSession(false, Session.AUTO_ACKNOWLEDGE);
6: Topic topic = (Topic)ctx.lookup("jms/DailyBean");
7: TopicPublisher pub = session.createPublisher(topic);
8: TextMessage msg = session.createTextMessage();
9: msg.setText("NewMessage");
10: pub.send(msg);
and it work with Sun App Server 8.2.

Not able to Parse XML data in Sun Application Server 8.2

Iam not able to parse the xml data in sun application server,this is working fine in tomcat and oracle server.
Please go thru the code , thanks in advance.This is used in ajax.
function processStateChange() {
if (req.readyState == 4) { // Complete
if (req.status == 200) { // OK response
     var message=req.responseXML.getElementsByTagName("value")[0];
          setMessage(message.childNodes[0].nodeValue);
//document.getElementById("theResponse").innerHTML = req.responseText;
          else
alert("Problem: " + req.statusText);
          return true;
     }

Use Notepad. Drag and drop in notepad.
Aman

Exception/error messages from remotely deploying sun application server 8.2

Hi
I have a solaris network with some servers running sun application server 8.2. When I deploy applications to these application servers (using ant) from a single server connected to them on the netwrok, sometimes exceptions are thrown. What is done now, is the person doing the deploying from the central server, logs onto each server with an appserver and looks through each application servers log file to see if there were any exceptions thrown while deploying apps on that server. What I would like to do is find some way to have those exceptions sent back to the deploying system so that they can show up on the terminal from which the any script was run.
appserver <------------------------- central server running ant -----------------------------------> appserver
/ | \
/ | \
/ | \
/ | \
/ | \
appserver appserver appserver
Many appservers getting apps deployed to them through the use of ant. Want to catch any exception thrown by any of the appservers and view on terminal on central server running ant.
Any ideas/thoughts?
Thanks...
Mike

The diagram did not come the way I had hoped. It was suppose to look like the "central server running ant" was pointing to a number of different servers running an appserver.
Thanks for any suggestions...
Mike

No Sun application server installes

Similar Messages

Maybe you are looking for