No support for text files attached in emails

I was shocked to discover that a simple RTF (Rich Text File) is not supported by iPhone. I was sent a small attachment as a text file and was unable to open it. Surely something as simple as a text file attachment should be easy to display.
Come on Apple, lets get working on version 1.1

fixed in later OS

Similar Messages

How to I read a text file attachment in email on my playbook

I can read it on my black berry smartphone, I have a program that will read text files but it can not see into wherever email attachments are saved.
I get log files in emails and the phone screen is a bit small to read them so I would like to use my playbook.
Any ideas.

Attachments are saved in your downloads folder:
/accounts/1000/shared/downloads
You might like to try Files & Folders, which gives you access to that folder and has a built-in text viewer.
Files & Folders, the unified file & cloud manager for PlayBook and BB10 with SkyDrive, SugarSync, Box, Dropbox, Google Drive, Google Docs. Free 3-day trial! - Jon Webb - Innovatology - Utrecht, Netherlands

Email with Text File Attachement as Source

Hi All,
One of my interfaces needs to listen to incoming mails with an text file attachements.I wish to know how we can convert the text file contents into XML to further process it on the reciever side.

Hi,
To perform content conversion of a flat file, check these blogs,
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Also, to understand file content conversion better, you can check this link on SAP Help,
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Regards,
Bhavesh

How to send a text file attachment through mail in ECC 6.0

Hi Friends,
As per the requirement, I need to send a ALV report result as text file attachment to user in ECC 6.0 . I know how to do in 4.6C version. But the same code is not working here in ECC 6.0.
Generally to get the data in new row in the text file we use below code in 4.6c.
data: c_value type x value ' 0D '.
concatenate c_value itab-line into itab-line.
By using above code, we get each row of the itab in a new line in text file.
Same code is not working in ECC6.0 as it is not supporting to concatenate bytes with characters. Getting the error like " field c_value should be diclared as type C or I or N or T or P"
Even I have used function module NLS_STRING_CONVERT_TO_SYS to convert hexa to char. It is converting the value' 0D' to ' # '. But it is not working.
Could you please suggest me that how can get each row of itab as a new line in text file in ECC 6.0.
Itab value:
abcdefdfldjfñlkdsjfñldsjfdsñljñla
fdsljfñldskjfldsñkjfñldsjfñldsajñld
vcxusfcxusfcusafcxusafcusafcdsauc
Actual result currently coming in text file:
abcdefdfldjfñlkdsjfñldsjfdsñljñlafdsljfñldskjfldsñkjfñldsjfñldsajñldvcxusfcxusfcusafcxusafcusafcdsauc
Expected result in text file:
abcdefdfldjfñlkdsjfñldsjfdsñljñla
fdsljfñldskjfldsñkjfñldsjfñldsajñld
vcxusfcxusfcusafcxusafcusafcdsauc
Please do the needful.
Thanks
Kumar

hi,
Try this function Module
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1 '
*example code
******* Create Message Body Title and Description****************
i_objtxt = 'test with pdf-Attachment!'.
append i_objtxt.
describe table i_objtxt lines v_lines_txt.
read table i_objtxt index v_lines_txt.
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = v_lines_txt * 255.
**** Main Text*****************************
clear i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
append i_objpack.
**** Attachment (pdf-Attachment)*************
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'smartform'.
concatenate i_objpack-obj_name i_objpack-doc_type into
i_objpack-obj_descr separated by '.'.
* I_OBJPACK-OBJ_DESCR = 'test'.
i_objpack-doc_size = v_lines_bin * 255 .
append i_objpack.
* Länge des Attachment ermitteln
clear i_reclist.
i_reclist-receiver = 'email address'.
i_reclist-rec_type = 'U'.
i_reclist-express = 'X'.
data: tab_lines like sy-tabix.
describe table i_objbin lines tab_lines.
append i_reclist.
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    exporting
      document_data              = wa_doc_chng
      put_in_outbox              = 'X'
      commit_work                = 'X'
    tables
      packing_list               = i_objpack
      object_header              = wa_objhead
      contents_bin               = i_objbin
      contents_txt               = i_objtxt
      receivers                  = i_reclist
    exceptions
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorization = 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      others                     = 8.
if sy-subrc <> 0.
    write:/ 'Error When Sending the File', sy-subrc.
else.
    write:/ 'Mail sent'.
endif.

Mail Adapter: How to send data as a simple text file attachment?

Hi All
I have a proxy to file scenario, where i write data to a text file.
Now, i need to have a second receiver. I have to send an email, with the above file as an attachment, to this receiver.
How can i do this?
How can i send the data as a text file attachment to the receiver?
Many Thanks
Chandra

Hi,
To send the message to the second receiver you need to have:
1) Necessary mail message format (can download from service marketplace)
2) Receiver mail communication channel.
3) Create the necessary Configuration Objects .... Receiver Determination, Interface Determination, Receiver Agreement.
3) You can do a XSLT mapping (if required)....if no complex logic is needed then you can do a simple Message mapping.
4) In the receiver CC make sure that you check the Adapter Specific Message Attribute checkbox.
For more info you can refer my answer in this thread:
Re: xml in mail
Also refer the blog:
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
Regards,
Abhishek.

Send Files - attach to email filename

I have dynamic page rendered by asp.net. Let's call it ShowPDF.aspx - it renders PDF file to output. I would like to ask regarding functionality for sending files directly from Adobe Reader X (Tools > Send Files > Attach to Email). The name of the attached file is prefilled to ShowPDF.aspx.
Can it be changed to any other values? How is the value calculated? Can it be influenced by any http header?
Thanks a lot

Drag or export it from iPhoto to the desktop, and if needed, drag that file to the Preview icon in the Dock, choose Export from the File menu, and specify JPEG as the format.
(89066)

Text file attachment in UTF-8 encoding

Hi
I have written a program which sends mails to the users with text file attached. the problem is the text file when you save it to the local desktop ( by clicking on save as ) the encoding is by default ANSI. I want to make the encoding as UTF-8. Is it possible to change this in program?.
thanks
sankar

OPEN DATASET - encoding
Syntax
... ENCODING { DEFAULT
| {UTF-8 [SKIPPING|WITH BYTE-ORDER MARK]}
| NON-UNICODE } ... .
Alternatives:
1. ... DEFAULT
2. ... UTF-8 [SKIPPING|WITH BYTE-ORDER MARK]
3. ... NON-UNICODE
Effect
: The additions after ENCODING determine the character representation in which the content of the file is handled. The addition ENCODING must be specified in Unicode programs and may only be omitted in non-Unicode programs. If the addition ENCODING is not specified in non-Unicode programs, the addition NON-UNICODE is used implicitly.
Note
: It is recommended that files are always written in UTF-8, if all readers can process this format. Otherwise, the code page can depend on the text environment and it is difficult to identify the code page from the file content.
Alternative 1
... DEFAULT
Effect
: In a Unicode system, the specification DEFAULT corresponds to UTF-8, and in a non-Unicode system, it corresponds to NON-UNICODE.
Alternative 2
... UTF-8 [SKIPPING|WITH BYTE-ORDER MARK]
Addition:
... SKIPPING|WITH BYTE-ORDER MARK
Effect
: The characters in the file are handled according to the Unicode character representation UTF-8.
Notes
: The class CL_ABAP_FILE_UTILITIES contains the method CHECK_UTF8 for determining whether a file is a UTF-8 file.
A UTF-16 file can only be opened as a binary file.
Addition
... SKIPPING|WITH BYTE-ORDER MARK
Effect
: This addition defines how the byte order mark (BOM), with which a file encoded in the UTF-8 format can begin, is handled. The BOM is a sequence of 3 bytes that indicates that a file is encoded in UTF-8.
SKIPPING BYTE-ORDER MARK
is only permitted if the file is opened for reading or changing using FOR INPUT or FOR UPDATE. If there is a BOM at the start of the file, this is ignored and the file pointer is set after it. Without the addition, the BOM is handled as normal file content.
WITH BYTE-ORDER MARK
is only permitted if the file is opened for writing using FOR OUTPUT. When the file is opened, a BOM is inserted at the start of the file. Without the addition, no BOM is inserted.
The addition BYTE-ORDER MARK cannot be used together with the AT POSITION.
Notes
: When opening UTF-8 files for reading, it is recommended to always enter the addition SKIPPING BYTE-ORDER MARK so that a BOM is not handled as file content.
It is recommended to always open a file for reading as a UTF-8 with the addition WITH BYTE-ORDER MARK, if all readers can process this format.
Alternative 3
... NON-UNICODE
Effect
: In a non-Unicode system, the data is read or written without conversion. In a Unicode system, the characters of the file are handled according to the non-Unicode codepage that would be assigned at the time of reading or writing in a non-Unicode system according to the entry in the database table TCP0C of the current text environment.

Support for Growing files (DNxHD wrapped in MXF) from EVS in Premiere Pro?

We are using Premiere CC Pro on the Mac-plattform against a shared storage soulution. We need to be able to open growing files from an EVS system to edit soccer-highlights while the matches are still playing. The problem is that the codec is DNxHD 120 and the wrapper is MXF op1a. This works fine with a QT-wrapper, but not with a MXF-wrapper. It is not possible for us the change the wrapper on the EVS system, so we need to do something on the editing side. We have tested it, and confirmed that this works fine in Final Cut Pro and Avid, but we want to use Premiere Pro. Can you provide us with a solution? Please do not say that the solution is to use FCP... ;-) Thanks in advance for all help!

Hi Peter!
Latest version. Cc 2014 with all updates.
Mac OSX 10.10.2 Yosemite.
Error during opening. As soon as the file is closed, it opens fine.
Mvh
Marius Borge
Sendt fra min iPhone
Den 10. feb. 2015 kl. 18.40 skrev petergaraway <[email protected]<mailto:[email protected]>>:
Support for Growing files (DNxHD wrapped in MXF) from EVS in Premiere Pro?
created by petergaraway<https://forums.adobe.com/people/petergaraway> in Premiere Pro - View the full discussion<https://forums.adobe.com/message/7181513#7181513>

How to add support for new file type.

Using the ESDK, I would like to add support for new file type ( a new extension). this new extension will function like any other non visual code editor but will have specific syntax highlighting, code folding and explorer.
I am trying ot figure out if I need to create a new editor or use existing JDeveloper code editor and add support for new file type. Does anyone have a high level outline on how to do this using the ESDK that is specifically targeted at adding new file type support for a text based code editor?
I have looked at the Samples and keep going in multipe directions. It would be cool if there was an example that was how add syntax higlighting for new file type.
Thank you

Brian, thank you. I looked at this extension and it answered a lot of questions for me. I was going in the right direction but needed a little help and bost of confidence, this is just what I needed. I created the LanguageSupport, LanguageModel, Addin, Node and TextDocument that are specific to the new file type. I was getting hung up on how to hook this into the JDevelpoer editor. I keep thinking I have to create a custom editor but it looks like I don't have to and it looks like I can associate this file support with the editor framwork, for version 10.1.3.2, with the following in the Addin Initilize() method.
Recognizer.mapExtensionToClass(MY_EXTENSION, MyNode.class);
CodeEditor.registerNodeType(MyNode.class, MY_EXTENSION);
LanguageModule.registerModuleForFileType(new MyLanguageModule(), MY_EXTENSION);
I have done this but still not able to recognize the new file type.
At this point, I just want to be able to recognize the new file and display it's associated icon or display a messare to the message log. I put a System.out.println("test") in the Initilize() method of my addin. then I registered MyAddin in the extension.xml. JDeveloper sees this new extension and it is loaded but I have not been able to show the test message or display the new icon when I open the new file type.
extension.xml
<?xml version="1.0" encoding="windows-1252" ?>
<extension xmlns="http://jcp.org/jsr/198/extension-manifest"
           id="teisaacs.jdev.myext.MyAddin" version="1.0.0" esdk-version="1.0"
           rsbundle-class="teisaacs.jdev.myext.resources.MyResBundle">
    <name rskey="EXTENSION_NAME">My Code Editor</name>
    <owner rskey="EXTENSION_OWNER">Me</owner>
    <dependencies>
        <import version="10.1.3">oracle.jdeveloper</import>
    </dependencies>
    <hooks>
        <jdeveloper-hook>
            <addins>
                <addin>teisaacs.jdev.myext.MyEditorAddin</addin>
            </addins>
        </jdeveloper-hook>
        <feature-hook>
            <description>My Code Editor</description>
            <optional>true</optional>
        </feature-hook>
        <document-hook>
            <documents>
                <by-suffix document-class="teisaacs.jdev.myext.model.MySourceDocument">
                    <suffix>my</suffix>
                    <suffix>MY</suffix>
                </by-suffix>
            </documents>
        </document-hook>
        <editor-hook>
            <editors>
                <editor editor-class="teisaacs.jdev.myext.editor.MyEditor">
                    <name rskey="EXTENSION_NAME">My Editor</name>
                </editor>
                <mappings>
                    <mapping document-class='teisaacs.jdev.myext.model.MySourceDocument">
                        <open-with editor-class="teisaacs.jdev.myrext.editor.MyEditor"
                                   preferred="true"/>
                        <open-with editor-class="javax.ide.editor.CodeEditor"/>
                    </mapping>
                </mappings>
            </editors>
        </editor-hook>
    </hooks>
</extension>
public class MyAddin implements Addin {
    public static final String MY_EXTENSION = "my";
    public void initialize() {
        System.out.println("MyEditor Constructor");
        new MyLanguageModule();
        Recognizer.mapExtensionToClass(MY_EXTENSION, MyNode.class);
        CodeEditor.registerNodeType(MyNode.class, MY_EXTENSION);
        LanguageModule.registerModuleForFileType(new MyLanguageModule(), MY_EXTENSION);
}I have added and removed the editor hook along with many other modificaitons to the extension.xml but still not recognizing the new file extension.
Todd

Why is there no support for RTF files in Pages?

Why is there no support for RTF files in Pages?
This is nuts!

You are not alone.
Actions speak louder than words, but Apple does manage to still distract many from what is self evident before them.
I am astonished by those who swear that non-existent features, or features that pre-exist the current version make Pages 5.2 a major upgrade.
An affect that does seem to wear off with familiarity, as each version of Pages 5 gets a boost in the App Store, only to see the disapproval rating surge back again.
Pages was always one of the top purchases in the App Store, now it doesn't even rate.
Peter

OS X support for offline files

Dear all,
I have a mixed environment of workstations running both OS X and Windows that connect to file shares hosted on Windows file servers. In order to be able to manage the storage space effectively, tape based archiving was implemented using Symantec's Enterprise Vault for File System Archiving. EV and many other archiving solutions use the Windows Offline file attribute to mark a file that has been archived off and install a filter driver into Windows so that archived files can be recalled directly from Windows Explorer without requiring additional software (this is also known as a reparse point). Please note that this is different from how Microsoft intended offline files to be used for synchronising between a roaming laptop and a network share (see KB 312717).
OS X does not have any support for offline files natively, both for how Microsoft intended it to be used and for use with archiving software as a reparse point. There are a couple of offerings on the market which add the required functionality to OS X, but recent updates to OS X have rendered these offerings non-functional:
10.6.7 - I understand that Apple replaced the SMB/CIFS modules with their own code. At this point, it no longer became possible to recall archived files using said software offerings, when connecting to a Windows file server via SMB. See Apple bug ID 10836961.
10.7.4 - a kernel update is included which means said software offerings are now not able to block the icon preview in Finder. The icon preview in Finder causes archived material to be recalled which we do not want it to do (imagine the problem when using tape as the archiving platform - this will cause a huge recall job on the tape drives)
This is going to cause significant difficulties as it effectively means that we can't use archiving with OS X to manage our storage costs.
I'm writing this as I'm hoping that someone will know of a product or solution that is able to work around the 2 difficulties noted above, or that someone from Apple is going to read this and realise that this is a serious problem. The ideal that is required is to add support for the offline files, in particular reparse points, directly into OS X.
Many thanks.
A frustrated storage engineer.

Hi Richard,
We are looking at file archiving here and have the same potential issues. We haven't evaluated this product, but it claims to solve the problem:
http://www.grouplogic.com/enterprise-file-sharing/mac-file-archiving-system/
Good luck
Mark

Is there any system level support for RAW files from an Olympus XZ-10 camera. I use Lion and iPhoto version 9.4.2

Is there any system level support for RAW files from an Olympus XZ-10 camera. I use Lion and iPhoto version 9.4.2

If there is I can not find it - Google provides a list of possible methods form Adobe and others
LN

Color space support for png files

kindly suggesting :
color space support for png files, requiring the support (read/write) of the chunks: iCCP, cHRM, gAMA, sRGB

Hi ChrisT,
Thanks for the suggestion. I went to:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4148...
Which is the software update page for my model. I see 10 items under Software Solutions, 8 of which are just video tutorial updates, not actual application updates (and none of those are for the Photo App). The two application updates are:
HP TouchSmart Recipe Box Application Update
HP Support Assistant Application Update
So, are you saying that PNG file types are supported in some versions of the Photo App and I don't have the correct version? Or in other words, what am I missing?
Cheers,
D

Where is Aperture support for raw files from Leica X Vario?

Where is Aperture support for raw files from Leica X Vario?

It doesn't appear to exist, at this time:
http://www.apple.com/aperture/specs/raw.html

Feature request: Slideshow module support for video files

I'm very excited about your MTS support!
Feature request: Slide show module support for video files...
Say you have 10 takes to choose from. Are you able to almost like SLIDESHOW view the 10 clips full screen so you can decide, like a playlist? Or rate them as they play? It would also be great, like SLIDESHOW to be able to export a MP4 with a title, the 10 clips you are working with, and maybe add an end title and a song, just like SLIDESHOW.
I have found editing stills like this in slideshow far faster than in any other editing program.
Basically, I just need a fast means to view or export an MP4 of a set of video clips to review. You are almost there.
great job!!!
Max

I was also disappointed that video is not supported in the slideshow module -I currently have to use another solution when I want stills mixed with videos, would be great to be ablo to keep it all in LR!

No support for text files attached in emails

Similar Messages

Maybe you are looking for