No synchronization for inserted video

I am facing problems in the synchronization for an inserted video (mp4, 1280x720). The video was inserted under powerpoint <Insert> <Video> <Video from a file>. (For other reasons, I can not import it under Adobe Presenter.)
The video length is about 1:30 min. but the slide published under Adobe Presenter is only 5 s in length (in accordance to Adobe Presenter <Settings> <Presentation> <Playback>)
I can set the video <Video Tools> <Playback> <Start:> to "Automatically" or "On Click" - it doesn't matter.
I am using:
Adobe Presenter 9.0.2
Windows 7 Enterprise SP1
Microsoft Powerpoint Professional Plus 2010 (Version 14.0.7116.5000   32 bit)
What can I do to solve the problem?
Thanks
Best regards
StefanS

Either:
- Convert it, or do what is needed, to allow you to import it via Presenter. This will allow presenter to 'see' that the video is there and adjust the slide length automatically to accommodate the video. Not sure why an MP4 wouldn't be able to be imported via Presenter.
- Go into the Edit Audio function and navigate to that slide. Click the Insert Silence button (small green icon), and select to insert ~90 seconds (or whatever the length of the video). This will cause the slide to display for the duration of your video.
Any setting you configure in PPT for the video will be disregarded in Presenter. Placing media in a Presenter presentation via PPT can cause it to not function at all. This is due to the media being called by a file path (often to an individual's computer that isn't a valid call on any other computer), and local file path calls are not allowed by Presenter presentations.

Similar Messages

  • How to disable the FULL SCREEN option in the 'Insert Video and Audio' option

    Hi,
    I've been inserting some MP3's and using an image for pupils to click on to play the sound, the images are 100 pixels by 100 pixels.
    The only issue is that I have the grey rectangle 'Full Screen' box over the picture. This is ideal when I put videos on but not necessary when you have just an MP3. Also I've noticed that the 'Styles' option is greyed out and due to that I can't change the
    colour of the play button.
    I've been inserting MP3's direct from my PC hard drive to the webpage.
    Any help'd be greatly appreciated.

    Hi,
    Per my understanding, you might want to disable the “Full Screen” button and make other customization when there is an audio file in the page.
    By default, when we insert an audio/video file into page via “Insert Video and Audio” button in the ribbon, an OOTB Media Web Part will be added into the page contains
    the file you added, the “Full Screen” button is a part of this Media Web Part.
    In consideration of you might have other requirements on designing the style, I would suggest you create a custom Media Web Part instead which will enable you customize
    the style as you want.
    About creating a custom Media Web Part, you can use the <audio> tag:
    http://www.w3schools.com/html/html5_audio.asp
    http://www.catswhocode.com/blog/mastering-the-html5-audio-property
    http://www.elated.com/articles/html5-audio/
    There are also other powerful JavaScript audio plugins:
    http://kolber.github.io/audiojs/
    http://jplayer.org/
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

  • Monitors for each video track?

    Is there a way to have seperate Monitor windows for each video track, so as I scrub through a Sequence I can have a preview of what is on each  track all at the same time (without using the Multi Camera editor)

    What I do is find a sync point in the first clip and add a numbered clip marker to that point (for example, a camera flash or a music hit), and then edit it into the sequence. I do the same for the next clip(s), using the same numbered marker, and add those into the sequence. When I've added all the clips, select them all, and go to Clip > Synchronize > Numbered Marker, selecting the numbered marker that is common to all of the files. Once you hit OK, all of the clips will be synced around that point.
    Definitely easier than looking at a four-up display and trying to figure out which one is which, IMO.

  • Can I Trick Presenter to allow me to Insert Video By Using Coding ?

    I am currently evaluating Abobe Presenter 7.0.7.   It has the tools to allow me to make by presentations, but the major limitation for me is the fact that I must manually insert video by using the "Adobe Presenter" toolbar.   I need a means of automating the process of insert the video into the power point slides without doing it by hand using the "Adobe Presenter" toolbar.   I am currently using flv files.  Can anyone help ??
    This is what I have noticed so far:
    1)     Inorder to publish the presentation, there is a folder created with the same name as your power point presentation.  Within that folder is a folder called "Assets".   Inside this folder you will file various flv files names like "v20110123_031_272_1_24357".   The original flv filename is "v20110123_031.flv".    I believe this is where the video file is placed when I use the "Adobe Presenter" insert video tool.
    2)     I also noticed that the power point slide has an object called "Shockwave Flash Object", and when I select this and display the "Properties" window, I see the following that seems important:  a)  Embed Movie = True, b)  Loop = False, and c)  MovieData = file path of video
    3)     I used the "more controls" toolbar that is part of power point and selected "Shockwave Flash Object" and scaled in a box on one of my slides.   I changed all of the properties to what I indicated in #2 above.  The "MovieData" file path was change to the correct path I the "Adobe Presenter" insert video did, but I change the flv file name and duration to the correct side.   I made a test case and insert the video in another presentation and copied it, but I made sure the pathname is correct for my test.
    3)     I am able to publish without any errors, the the inserted flv does play.   I assure its not working correctly.
    Does anyone know what I can try to get something like this to work (without using the "Adobe Presenter" invert video) because I am abvle to write MS VBA Code to generate everything else.
    All my power point slides are generated by using MS VBA code completely because I have many of these to do each week for over 18 weeks.
    I would appreciate any help or suggestions of other tools that I can use. 
    I believe Captivate also has this issue where I have to do this manually.
    Thank You,
    G

    I don't really know too much about AutoIt Tool.   This is what I tried:
    1)     I used MS Access VBA Code to open my power point slides and use the SendKeys to open various menu in the power point slides.   I do see the menu called "Adobe Presenter".
    So I tried using the SendKeys "%{P}", True    which sends out the command Alt+P which is suppose to open the "Adobe Presenter" drop down menu.   It didn't do that but open the "View" Menu and select the "Header and Footer" menu.
    So I tried using the SendKeys "%{I}", True   which sends out the command Alt+I which is suppose to open the "Insert" menu drop down and it works.   For some reason it didn't work for the "Adobe Presenter" menu.
    2)     When I just open power point and type Alt+P, it does open the "Adobe Presenter" drop down menu.  
    Any idea ??     Do you think the AutoIt may work better for me ???
    Thank You,
    G

  • Unable to publish projects with inserted video - error message The Flash video can not be loaded

    I've created a project in Captivate 6 with two slides that have inserted videos in them
    Both the videos were created in Captivate 6 by publishing those projects as mp4 videos
    They play fine in the previews but when publishing I get the error saying the Flash video can not be loaded for both of those slides and in the output files the area for the video is blank.
    I have checked that the videos are not open anywhere else as I saw on a previous post this was the issue but the only place they are in use is in the project I am trying to publish.
    Below are my settings and the error message
    Any suggestions would be greatly appreciated.

    Your screenshot indicates you are publishing to a folder on a network drive.
    Have you:
    Verified whether or not the video file exists at the published folder location? (It should ideally be sitting in the same folder as the SWF that calls it.)
    Verified that the folder location is set up as a trusted location in your Flash Global Security settings?

  • CP 6 issue with inserted videos

    Hi All,
    I have an issue with inserted videos in CP6. They play in preview (F8) but not in published output (swf nor html).
    This is what I do:
    The videos created with CP6, Record new Demo
    output cpvc
    open cpvc in CP 6
    publish see settings below:
    Now I want to insert the captured and published demo into my training CP6 project
    click 'Video' on menu bar -> Insert Video -> select 'Event Video' -> browse to the file on my computer -> select file (mp4) - click OK
    Video gets loaded into CP6 project with default skin
    Before save the changes of the project I change the settings on the property panel to:
    Now I preview my project
    Press F8
    Preview is generated
    video demo plays automatically as expected
    This all even works well with multiple demo videos on one slide which can be selected by clicking different show me buttons (advanced actions created to show and hide according videos)
    BUT now I publish my project and nothing works anymore, videos do not show on scene and cannot be selected with respective show me buttons
         Publishing settings are:
    At the end of the publishing dialogue I click to view output in web browser (IE9) and there starts the trouble:
    IE shows up withfollowing dialogue:
    I allow blocked content and select cancel in the following dialogue box:
    And the training loads, everything works fine except the videos integrated to start automatically there is a blank space nothing.
    Does anyone have an idea solution for me?
    I am so puzzled and do not know hoe to proceed...
    Thanks in advance for your reply!!!
    Stephanie

    Hi RodWard,
    Thanks for your fast reply!!!
    The video files are present in the same folder as the SWF publish location.
    The drive letter is on my local PC with multiple partitions and not a network drive.
    Flash global security settings are set for E:
    To your last suggestion about file naming I did the following:
    Generate new mp4s
    Name them only with alphanumerics ie. DemoScroll
    insert them into project
    preview OK
    publish and check if demos are in folder - yes they are
    open html in IE9  - NOK!!!
    Now frustration rose...
    So I tried one thing that I had not yet tried - open html in FireFox and there it is OK :-)
    I do not understand....BUT we need to be able to support IE!!!!
    Do you think there are specific settings that need to be changed in IE to make it work?
    I would highly appreciate a suggestion what to look for in IE...
    Do you think it is related to IE9?  ´
    Since I have IE 9 and CP6 I also get the LMS messages and actriveX message when viewing projects in browser.
    Looking forward to your help.
    Thanks in advance Stephanie

  • Inserting Videos Without MS Word In Acrobat Pro 9 Extended

    I've been experimenting with inserting videos as native content using Acrobat Pro 9 Extended. For my ebook publishing this is such an ideal situation, but I don't use MS Word, and there doesn't seem to be any real facility in Acrobat 9 to do simple formatting of the video object (like center it, for example.)
    I do have an older version of Word (2000) but it doesn't have the menus listed that seem to inserted into newer versions.
    Does anyone know what version of Word is required for this functionality?
    Furthermore, is there another way to do this using some other program? I use OpenOffice typically, but could try others if need be.

    Thank you for your post. These forums are specific to the
    Acrobat.com website and its set of hosted services, and do not
    cover the Acrobat family of desktop products. Please visit the
    following forums for any questions related to the Acrobat family of
    desktop products:
    http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/

  • Problems inserting video via ms word

    Hi
    I am trying to insert video into ms word for Acrobat Pro Extended as per the instructions below.
    When I get to point three I get a message:
    AdobePDFmakerX Library not registered.
    Screen shot shown in the attached file.
    Any ideas?
    Thanks
    Ken
    Insert video into Word, Excel, and PowerPoint files
    Acrobat Pro Extended adds a feature to Office that enables you to add video in FLV or SWF format to an Office document. Video that is created in other formats is converted to FLV format when it is added.
    After adding a video to an Office document, you can convert the document to PDF and edit the video properties if needed.
    In the Office document, select the position where you want the video to appear.
    Do one of the following:
    In Office 2003, click the Insert Video button in the PDFMaker toolbar.
    In Office 2007, click the Embed Video button in the Acrobat ribbon.
    Click the Browse button, and then locate the video you want to include.
    Change the video settings as needed:
    For video that is not in FLV or SWF format, set a poster image by moving the slider to the desired frame. Then click Set Poster Image From Current Frame.
    To determine how the playback controls are displayed, select an option from the Skin menu.
    To change the display size of the video, click Resize Video, and then change the width and height. Maintain the aspect ratio for best display.
    Click OK to convert the video (if needed), and add it to the document.

    In the future you might want to seach Google with the error message; Often shows one interesting results.
    Any way hopefully this article will point you in the right direction. It seems removing the Office Acrobat Plugin and then re-installing solved the problem for at least one person. See this thread  It it doesn't work specifically with your situation you may want to search the entire results page I got on Google (2 pages) as I don't have time to research them for you and I haven't experienced this specific problem myself.
    Cheers.

  • How to insert video without affecting audio on Mac

    I'm trying to insert video but it keeps displacing my audio in soundtrack.  I hold the alt button as it says in help instructions but it doesn't work.  How do I do this seems a simple thing a program like this should do.

    Welcome to the forum.
    It sounds like you are running up against PrE's default to do a Ripple Edit, when you want an Insert Edit. The modifier key to use to toggle between Ripple and Insert, is Ctrl (on a PC, which should translate to the Cmd key on the mac). If the Ctrl key is held down, then the editing process becomes an Insert Edit.
    Let us know if that works, and good luck,
    Hunt
    [Edit] Steve, thanks for affirming that it IS the Cmd key on the Mac.
    Message was edited by: Bill Hunt

  • Quality issues with inserted video file

    Hello,
    can anyone help me with a video problem in Captivate 6.1, please!
    I’m currently working on a Captivate project where I need to include a movie file.
    I have the same movie in two different formats .mov and .wmv, which are both looking just great when I watch them with any player on my Windows7 system or on the Mac of my colleagues.
    When inserting the movie the encoding to .flv takes place by the Media Encoder, which also seems to be working just fine.
    But when playing the project in Captivate, the inserted video shows such a bad quality, that I’m not able to use it like this.
    I already have tried different things (inserted as event video or multi-slide synchronized video; changed the slide quality to high; encoded the movies to .f4v files with the Media Encoder; installed a new windows codec package) but nothing leads to an acceptable result.
    Which settings do I need to change in Captivate/in the Media Encoder to receive a good video quality?
    What else could I do to improve the quality of movies for Captivate projects?
    Is there any minimum requirements for movies concerning file format, encoding, or anything else?
    Thank you so much in advance for your help,
    Sabine

    Hello Varun,
    thank you very much for your reply.
    I tried unchecking the compression options, doesn’t help
    I haven’t yet published the project, the problems occur already when playing the project in Captivate.
    The project resolution is 1280x720.
    The resolution of the .mov-file of the video is 1920x1080 (12000Kbps, if this information is any helpful…)
    The resolution of the .wmv-file of the video is 1280x720 (3000Kbps…)
    Maybe the problem occurs already during encoding, the .flv that is created by the Media Encoder doesn’t look that good anymore, I just played it separately (not in a Captivate project).
    Are there any settings I could check for the Media Encoder?
    Thanks,
    Sabine

  • Insert video question

    Hi.
    I have inserted video no problem, and am now trying to get
    the first frame to show an image I made (the current first frame is
    black on pageload, which looks bad). Can anyone tell me how I might
    do this?
    Thanks!
    -Derek
    CEO,
    Shimano Fishing

    DW cannot add a Poster Frame to your video. You need to bring
    your project
    into Flash for this.
    http://monkeyflash.com/tutorials/poster-frame-for-flash-video/
    Nancy O.
    Alt-Web Design & Publishing
    www.alt-web.com

  • Inserting video between two clips

    Hi does anyone know how to insert video between two clips without erasing some of the two clips. I want to insert and have the other clips just make room for the new clip, extending the timeline the necessary amount. I thought you could just drag it in but it keeps erasing the existing footage in the timeline. Any advise would be awesome

    Make sure the playhead is parked between two clips, and drag the clip from the browser/viewer to the canvas, dropping it on the "insert" box in the edit overlay. Or you could drag the clip from the viewer/browser to the timeline but make sure the arrow that appears is facing to the right, not down.

  • How to synchronize audio and video rtp-streams

    Hi everyone!
    I've tried to make one of the processors, processor1, control the other processor, processor2, with processor1.addController(processor2) but I get a
    javax.media.IncompatibleTimeBaseException. I need to synchronize audio and video rtp-streams because they are sometimes completely out of sync.
    In JMF API Guide I've read:
    "2. Determine which Player object's time base is going to be used to drive
    the other Player objects and set the time base for the synchronized
    Player objects. Not all Player objects can assume a new time base.
    For example, if one of the Player objects you want to synchronize has
    a *push-data-source*, that Player object's time base must be used to
    drive the other Player objects."
    I'm using a custom AVReceive3 to receive rtp-streams and then I create processors for the incoming stream's datasource's, and they are ALL PushBufferDataSource's.
    Does this mean I can't synchronize these. If so is there any way I can change them into Pull...DataSources ?
    How are you supposed to sync audio and video if not with as above ?

    camelstrike wrote:
    Hi everyone!
    I've tried to make one of the processors, processor1, control the other processor, processor2, with processor1.addController(processor2) but I get a
    javax.media.IncompatibleTimeBaseException. I need to synchronize audio and video rtp-streams because they are sometimes completely out of sync.
    In JMF API Guide I've read:
    "2. Determine which Player object's time base is going to be used to drive
    the other Player objects and set the time base for the synchronized
    Player objects. Not all Player objects can assume a new time base.
    For example, if one of the Player objects you want to synchronize has
    a *push-data-source*, that Player object's time base must be used to
    drive the other Player objects."
    I'm using a custom AVReceive3 to receive rtp-streams and then I create processors for the incoming stream's datasource's, and they are ALL PushBufferDataSource's.
    Does this mean I can't synchronize these. If so is there any way I can change them into Pull...DataSources ?The RTP packets are timestamped when they leave, and they are played in order. You can't change the timebase on an RTP stream because, for all intensive purposes, it's "live" data. It plays at the speed the transmitting RTP server wants it to play, and it never gets behind because it drops out of order and old data packets.
    If your RTP streams aren't synced correctly on the receiving end, it means they aren't being synced on the transmitting end...so you should look into the other side of the equation.

  • Inserting Video Into My Training

    I have some video that was captured as an AVI file and they
    also put it into MPg4 format.
    Do I need to convert this into a SWF flash file before I can
    insert it into my training program? Do I need outside software to
    make this conversion or will "Presenter" do this for me? Is there
    somewhere that explains the process for doing this other than the
    Adobe Guide for "Presenter". I have not found this very clear.

    Presenter has the ability to take, ASF, WMV, MPG, MP4, DV,
    DVI, MOV, or 3G videos to FLV.
    Use the Insert Video tool in Presenter and see if the MPg4
    video will work, or if the team that created the AVI has the
    ability to turn it into an FLV, that my be the best option as FLVs
    work naively in Presenter.
    Jorma@RealEyes

  • Inserting video clip and have both audios at once

    Hi everyone, hopefully somone can help answer my question.  My friend has a video blog and the person who used to do all of his technical stuff is no longer with him, so he's trying to figure it all out, and I figured I'd try to help him.
    In iMovie, does anyone know how to insert a video clip into the main video clip and have the inserted video being shown on the screen but the audio of both videos playing at the same time, with no break in continuity of the main video's audio?  Then, how to transition from the inserted video with both audios playing at the same time back to just the main video, again with no breaks in audio continuity?  I know it's possible on FinalCut Pro, because that is what his tech person used, but for some reason that program freezes my friend's computer, so he's stuck with iMovie for now.
    Any help would be greatly appreciated!  Thanks!

    Thanks for your reply devbear11.  You ALMOST got what I was asking for.  I'm sorry if my wording is confusing, lol.  Everything you said is great, EXCEPT that  I want to KEEP the audio on the inserted video in ADDITION to the audio on the original clip.  So to break it down....
    - Main video clip is playing.
    - Segue into the inserted video clip.  Have the screen be showing the inserted video clip and have it be playing it's own audio, WITHOUT interrupting the audio of the original/main video.
    - Inserted video clip plays on the screen and you hear both the audio of the inserted video clip in addition to whatever my friend is saying on the main audio....To give you an example, my friend blogs about figure skating.  So he will be discussing a competition and the screen is showing him at his desk talking about the different skaters.  While he is discussing a certain skater, he may input a clip of their performance and you will see and hear them skating to their music, but still be able to hear him discussing it uninterrupted in the background.
    - Once the inserted clip ends, the video switches back to my friend at his desk, with his commentary uninterrupted.
    Am I making sense? lol

Maybe you are looking for