No Thumbnails for RAW imagages from SDHC Card

I just purchased the 1Ds Mark III and when I bring in images from the CF card, I have thumbnails. When I bring in images from the SDHC card, no thumbnails. I can double click and open them in CS3 just fine however.
It is INCREDIBLY inconvenient to not be able to preview files! I have to open each and every file which is completely unacceptable and time consuming.
Anyone know what's up with this?
Cole
[email protected]

You are not alone. See http://www.adobeforums.com/webx/.3c062094/1
No one has responded with a solution. Many of the posts just end so the reader does not know if a solution was found or the problem still exists.

Similar Messages

No Thumbnails For NEF's from Mem Card or CD

Hello,
I have a problem that just started in Bridge(never happened before). When I try to preview NEF files in Bridge I get a Photoshop icon and no thumbnail preview. I can't open these images from Bridge either. If I copy the files to my harddrive I can view and open them as normal. What is causing this?
Thank You, WonderWendy

I encounter a similar problem, I can upload images from a Nikon D3 to bridge via a card reader, view thumbnails and use all Bridge functions. When uploading images from a Nikon D 90 using the card reader, instead of thumbnails I get a Nef decal. The images are uploaded and can be opened in Photoshop. But I am not able to view the images and perform any Bridge functions, such as removing rejects and creating collection.
Today I uploaded images directly from the D 90 and the thumbnails appeard in the import dialog, once import was complete I again ended up with the Nef decal instead of the thumbnails.
Any advise would be very welcome.
Weisenauer

Will bios boot from SDHC cards?

I'm trying to put an Arch Linux install on a 32GB SDHC card. I'm able to install the required files, but for whatever reason I can't get the SDHC card to show up in the boot menu, and UEFI doesn't seem to work. Of course, I haven't had any luck with UEFI booting on the W530 for some reason. I can get UEFI to work fine on my desktop, but no luck on the W530 from regular hard drives or my SDHC card.
Will the W530 recognize and boot from SDHC cards that have GRUB installed on them? So far I've had no luck with that. The card never shows up in the boot menu. I can't even get it to boot installer images. Booting from USB works just fine.
Solved!
Go to Solution.

The SDHC reader on thinkpads is attached to the PCI Bus. Makes for faster Read write, but kills booting from it.
W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac.

Is there any system level support for RAW files from an Olympus XZ-10 camera. I use Lion and iPhoto version 9.4.2

Is there any system level support for RAW files from an Olympus XZ-10 camera. I use Lion and iPhoto version 9.4.2

If there is I can not find it - Google provides a list of possible methods form Adobe and others
LN

Cs6 bridge not showing thumbnails for raw file

Just upgraded to CS6
cs6 bridge not showing thumbnails for raw files.
Can see thumbnails in CS5.1 bridge and LR 4.2 which fortunately i did not uninstall.
Bummer since I am up against a hard deadline.
Really Sucks

We can't know. You are not offering any system information or e.g. info about what image files you are working with. Since they do show up in your otehr programs, my assumption would be that you need to switch the Camera Raw engine back to the 2009/2010 version in Photoshop and not use the default new 2012 one. Perhaps your thumbnails will appear then....
Mylenium

Where are the tutorials for Raw files from my Nikon?

Where are the tutorials for Raw files from my Nikon?

These tutorials should how to work in camera raw so you can edit NEFs.
How to make non-destructive edits in Camera Raw | Adobe Photoshop CC tutorials

Where is Aperture support for raw files from Leica X Vario?

Where is Aperture support for raw files from Leica X Vario?

It doesn't appear to exist, at this time:
http://www.apple.com/aperture/specs/raw.html

Import raw files from XQD cards

Is premier pro cc able to import raw files from xqd cards. this video would be shot on Sony new PXW X100 4K CAMERA. Then edited with the raw files?

You are using the word "RAW" but the camera does not shoot "RAW". Are you askign if you can import Z100 footage into PRemiere CC? Yes you can. I have some Christmas light footage I can play. I can't export it to anything that black bagic media express will recognize and play over a black magic 4k card HDMI to a 4K monitor...

Open event for RAW files from Bridge

I installed the “Open As Layer.jsx” to promote the background into a layer and rename that layer to the file name. This is working perfect when I open the file via file menu from PS.
If I use a double-click from the Bridge it works only for JPEG’s and other files but not for RAW-files. As soon as ACR is involved, no open event is fired in Photoshop.
Is there a way to catch another event after the file is placed in PS? I tried to find some with the ScriptListener.8li but I don’t get a log entry.
Thanks for help.

Edit:
Glad to hear you got it working.
I'll just leave what i had put here anyway.
You want Program Files (x86)
That's where the 32 bit programs such as photoshop cs3 are on a windows 7 64 bit system.
Also, in bridge cs3 under Edit>Preferences>Thumbnails ensure Prefer Adobe Camera Raw for Jpeg and Tiff files is checked.
(then restart bridge cs3)

How do I upload my Raw files from SD card to a cloud?

Is it possible to upload Raw files from SD to a cloud using Ipad? Any solution without jailbreak?

Hello Vadim245,
You can import RAW images from your SD card using the iPad Camera Connection Kit:
iPad Camera Connection Kit
http://store.apple.com/us/product/MC531ZM/A/apple-ipad-camera-connection-kit
Also, RAW images are supported by iClouds Photo Stream feature:
The following image file types are supported for Photo Stream: JPEG, TIFF, PNG, and RAW.
You can find more information about Photo Stream limits here:
iCloud: Photo Stream limits
http://support.apple.com/kb/HT4858
Thank you for using Apple Support Communities.
Best,
Sheila M.

Raw + JPG from two cards

With the D3, I write RAW images on one card slot and JPG to the other. When I shoot with other cameras that do not have two card slots and shoot Raw+JPG to the same card, LR is set up to treat these pairs of files as one. When I batch rename, both files get renamed. The problem is that I do not know of a way to "combine" the Raw and the JPG when they are copied from two separate cards but otherwise are the same photo. Does LR have a way to do this after the fact?
The reason why I want to do this is to use LR to rate, sort and renumber the images from a shoot. End prints will be made from the Raw files. But I'd like to use the camera JPG's as the basis for uploading the images to the web quickly. The raw images often need more tweaking than the JPG for web delivery. To get the images online quickly, I need to use the JPG versions. And in order to do this and not rate both a raw and the same jpg, I need for LR to see them as the "same" file. Can this be done?

Jao, thanks for your post. The reason why I do need to treat the +JPGs as one file is specifically so that I can rate and rename them.
It would be nice if LR allowed you to import Raw+JPG as one but then gave you an option to display one or the other type of file. This way, I could go through the JPG's faster for rating as the files are smaller, but still apply the rating to the RAW files. Then I could also create a web site from the JPG's in LR w/o doing anything special as well. When I am ready to make adjustments to the RAW files, I could set the LR switch to only display and adjust the RAW files. Since LR is already smart enough to treat them as "one file", I would not think it would be a stretch to add a display option to display one file type or the other.
But back to my original post, I think that the solution that you have provided should work. I can simply copy the files to the hard drive first from the two cards and when I import the files into LR, LR should then know to keep the RAW and JPG files together.
Once the rating and renaming is done on the combined files, I can simply create a windows folder with just the files that are rated high enough to put on my web site for the shoot. Then, I could either re-import just the JPG files into a catalog to create a web site of just the JPG's, or easily use Bridge to segregate out only the JPG files to create a web site using Bridge. While these procedures are not ideal, they are easy and will work quickly to accommodate hundreds of images. So the only missing piece for my was copying the images to the hard drive before importing them into LR. Thanks for the tip!

Suddenly can't import photos from SDHC card after installing Snow Leopard

After we installed Snow Leopard, we suddenly can't import any photos from our camera when we use an SDHC memory card. Regular SD cards work fine and importing from our SDHC card onto our MacBookPro w/o SnowLeopard works just fine. Anyone have any solutions for this? Tried my card reader, too, and get same problem. Hook up camera/card reader, iPhoto takes a long time to recognize it, and then I get blank photos. I click import and then get an error message about unreadable files. Only happens when using the SDHC card. We're using iPhoto '08 on both Macs.

I vaguely remember other posts regarding the SDHC card. Have you searched for "SDHC" in the forum to see what other users report and they found a solution?
OT
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

Importing Raw Files from CF Card in LR4

Why is LR4 requiring me to convert my files from the old process to the LR4 (2012) process for raw files imported directly from my CF card into LR4?

new files you took with your camera are normaly not processed at all.
can you describe your problem a bit more?
you mean your new RAW files are imported into LR 4 as PV2010 files and not PV2012 files?
so you have to manually update them to process version 2012?
i don´t have that problem.. i could only think that you maybe us a preset that uses PV2010?
but then even my old preset use the new PV2012 when i import images.

Macbook pro cannot import photos from sdhc card

I am having a problem trying to import any new photo from my sdhc card to my macbook pro,

I thought so too, but images was not to find on my hard drive..
Funny thing is when i tried to import regular JPG files from some other SD card, it worked perfectly.
I always shoot in raw, and i always choose to convert to DNG while importing.
I am suspecting that it might be something wrong with this new raw update!
The exact massage i get after LR has converted to DNG:
"Could not copy a file to the requested location"
under that all of de NEF files are listed

Ideapad S205 doesn't support booting from SDHC-Card

Hello,
I have the Ideapad S205 and I cannot boot from a SDHC-Card (Ubuntu Linux) with the internal cardreader. With an external card reader I can boot from the SDHC-Card.
Is there any solution or maybe a BIOS-Upgrade?
Thanks
Simon

when you see lenovo logo, press f12 to set bios order.
also, check for bios booting option. if there's not option, i don't think s205 supports booting from sdhc, but apparently it supports usb boot.

No Thumbnails for RAW imagages from SDHC Card

Similar Messages

Maybe you are looking for