No valid info record price when creating PO

When I created a PO with an info record, but no valid price for the date, the system used the most current PO to price the new PO.
Is there a way to have the system give a warning message that there is no valid info record price?

Rahim
I made the change to the setting and it did return a warning for NO info record.  But the second time I used the material/vendor, there was no warning theat there was no valid info record price
The PO just used the price from the previous PO with no message about the source.
How would a buyer know that he needs to go "do something" about an info record price?
thanks for you help
Althea

Similar Messages

  • Update info record price, when changing contract price

    Hi
    In the SAP OSS 569885  it is precised clearly:
    If an info record already exists, upon creation or change of
    a contract, neither price nor conditions are updated in the info
    record.
    So, my question is:
      Is there any way to update info records  prices upon a contract change or creation .
    thank you in advance for your support

    the info record is a kind of general, means it has the general price. A contract is an agreement for a certain quantity and price and period that may have a price that you can only get from your vendor  with this kind of agreement. So it is not really logical to have the contract price in the info record, too.
    There is no way to get this update automatically.

  • Changing Info Rec Prices when Contract Exists....no warning?

    Hi all,
    Quest1:
    Does anyone know a way to initiate a warning (or hard stop) in ME12 (Change Info Record) when a user is changing a price when a Contract exist for that material and vendor in the info record?
    The Superuser's goal: Stop other users from changing the Info record price when a Contract already in the system exists with a agreed price. How to put a hard stop? I know for a fact, there's a msg that compare's Material Std Cost with the Purchase Price and gives warning, but that doesn't service this purpose as Superuser want to block the Info Rec being changed if a Cotract Exists.
    Quest 2:
    Also, when a Contract's Price is changed (in ME32K) it will NOT change the Info Rec (created earlier may be manually or as a result of RFQ price selection) Price, eventhog the Contract "Info Update" indicator is set.
    Why is thi? Do you guys know?

    hi Duke,
    Asnwer 1 . you can make the message an error message, by this your problem will be solved and no one enter the same again....
    Answer 2. In the std sap system, PO price doesn't get updated in the inforecord, but the PO price history gets updated....
    This may be because, if you make the one PO and change it....and after this if you wanna make the other po with the last ie. ORIGINAL price...then we you use the inforecord to see the original price...while on the other hand you can also see the PO price history from ME1P for the same...
    Hope it helps...
    Regards
    Priyanka.P

  • Info Record price wrt inco terms

    Hi
    The current scenario is that the info record price maintainance is mandatory.
    However in a scenario that is import there are prices based on the inco terms.
    Is this possible? For eg Price when CIF is 100 and when FOB is 90 for the same material vendor purch org combination
    Thanks
    Rahul

    Hi
    Yes this is possible, if you need to determine your price based on the Incoterms then you need to maintain the condition records accordingly.
    Maintain the condition records with the key combination containing the Incoterms.
    If you do not have any key combination then you createa  new condition table and assign it to the access sequence and then you can create the condition records.
    Configuration steps are in the Price determination process in Purchasing
    Thanks & Regards
    Kishore

  • Info record price picking.

    Hi
    Currently I blocked manual entry of price in PO. The price should pick only from info record, if info record is not there for the material then it should through an error message.
    I have already made Message No: 06 136 No info record exists for item & as an error message, but still it is showing error messge saying "Net price should be greater than 0"
    Kindly suggest me.
    Rgds
    Srini

    Dear Mahesh,
    It is from SCM team they will create info record.
    Purchase dept will raise PO. 
    While creating PO by purchase dept & if Info record is not created then it should throw an error message saying info record is not existing for the item so that they can tell to SCM to create info record.
    But currently sytem is saying an error saying that NET PRICE IS GREATER THAN 0 ONLY, as I told earlier in PO they can't enter price manually.
    Hence error message during creation of PO should come as NO INFO RECORD EXIST.
    I have made following settings:  IN SPRO SETTINGS FOR SCREEN LAYOUT MADE INFO RECORD AS MANDATORY.
    MADE 06 136 AS AN ERROR MESSAGE.
    After all this process still it is showing as NET PRICE IS GREATER THAN 0 ONLY

  • Fetch Info Record price from ECC 6.0 and print on Consignment Contract form

    Hi, we need to fetch the info record price from ecc 6.0 and print it on the consignment contract form. the system for using consignment contracts is not designed yet. once it is designed the consignment contracts would be created in the srm system. we're using srm 5.0 and using extended classic scenario. currently the purchase contracts are being created directly in the srm system. someone plz help me with this.

    knock knock...anyone here? plz help me.

  • Costing issue-Why Info record price is not read ?

    Hi,
    We have an issue while costing a Material procured externally.
    Valuation Variant >>> Priority 1-Info record price. >>Priority 2-Material Master valuation price.
    However, system is picking the price matained in the Material master.
    I have verified the validity of the info record and the Blocks on the Vendor and seems ok.
    Are there any specific checks need to carry out to know if the info record is a valid one.
    Any idea why system is picking Price from Material Master?
    Your help is appreciated.
    Kind Regards
    Umapathi G

    HI Umapathi
    Does any scheduling agreement exists for this info record
    refer this link.. This issue is pretty common these days and has been discussed many times in the forum
    CK11N- Material cost estimate with & without agreement
    Regards
    Ajay M

  • How to update info record price in to material master as a standard price -

    Hi Experts,
    We have a client requirement as below:
    Client wants to compare the info record price per material for all related vendors.
    Once he arrives at the best effective price (Material Price + Freight + Duty), he would want this price to update in the Material Master Record as Standard price.
    I know we can use MR21 and LSMW to update this manually but we are looking to automate this process as we have more than 100,000 records in the system.
    Can the above requirement be addressed through CK40N? if yes, How?
    Thanks,
    Jammy

    Hi Jammy
    Usually, in std SAP, if there are multiple condition records, the one with lowest price is considered by the system in CK11N/CK40N
    Configure your valuation variant to pick up price from info record... As far as I remember, the one with lowest price would get picked up when you do costing run...
    however, if your requirement is bit different than this, but is based on a logic which can be configured in the system, then use Valuation Strategy U in your Valuation Variant and write your code accordingly in the exit COPCP005 (Component EXIT_SAPLCK21_002.)
    Regards
    Ajay M

  • Info record price should be Mandatory in PO.

    Hi Experts,
    I wanna to do Info Record Price mandatory while creating PO.
    System should give Error Message if the price in PO & Info Record Differs?
    How it is possible?
    Thanks in advance.

    Hi ,
    As jurgen suggests , you could do with exits.
    If there is possibilty for you to change the pricing schema.
    Then have a schema which has only PB00  condition with access restricted to Info record only. This might create a situation where price amendments can be done only with info record and PO's created will always have the pricing in sync with info record.
    Correct me if my thinking is wrong.
    Harish

  • Update info record price

    Hello,
    We have requirement to update 2 info record prices based on qty irrespective of validity .i.e.
    the first supply of 100 qty will at price u201CXu201D and there after the price will be u201CYu201D.
    How do we maintain info record ?

    Dear All,
    After supply of 100 nos, we will release order which may be less the 100 and the system should pick up Y price.
    Scales will not help our requirement.

  • Purchase Info record mandatory to create PO/SA

    Hi,
    Please tell me the user exit in PO to make Purchase Info record mandatory to create Purchase Order or Scheduling Agreement (only for material with material code). No PO/SA for material should be created without any Purchase Info record maintenance.
    Thanks
    M

    Hi,
    Mantain source list check box in the material master record - purchase view.
    Then for this material,  purchase info record and source list both are mandatory.
    With out this, system won't allow further.
    Regards
    KRK

  • Fixed vendor Info record price report

    Hi,
    Is there any SAP report which can only show me the current info record price for multiple materials for their respective fixed vendors?
    Sincerely,
    Puja

    Hi Pooja,
    You can try ME1P transaction.
    Cheers,
    SAtish Purandare

  • Inherit Purchase Requisition Price when creating a PO based on a PR

    I would like to know what configuration is required to "inherit" the Purchase Requisition Price when creating a Purchase Order based on that Purchase Requisition.
    Best Regards,
    LO

    Hi,
    Its related to Buyers authorization: Line of action mention as under-
    1. Go to SPRO > MM > Purchasing > Authorization Management > Define Function Authorizations for Buyers > Function Authorizations: Purchase Order > Here "New Entries" and define Function Authorization Key as "01" and give description.
    you can also use the trax Code - OMET
    Now in "General parameters" subscreen, activate "Adopt PO Price" indicator and select "Enter conditions"
    In "Possible ref. objects", select "W/o reference" otherwise reference documents (for e.g. PR, RFQ, etc...) for PO will become mandatory.
    2. Now go to SU01 > Enter User ID > Parameters Tab > Here for Parameter ID EFB i.e. Function Authorization: Purchase Order, maintain value "01" and check in PO, PR will become mandatory for that user.
    3. Now during creation of PR in ME51N, under "Valuation" Tab, you will get option for PO Price Adoption as Net or Gross. Select as per your requirement and it will copy Price to PO.
    Regards,
    Sujoy

  • Info Record Price

    Hi !!
    My PO is of date 01.01.2010 & now I changed Info record price from date 01.01.2010 & today is 10.04.2010,but how this will be changed in PO.

    Hi,
    Open Po in change mode go to conditions and then click on update select B Carry out new pricing.
    Thanks and regards,
    Amol S. Arote.

  • Automatically update of the info record price conditions from last purchase

    Dear.
    I need to massive update the info record price conditions from the last purchase order price for a list of materials.
    Does exist a standard transaction where I can I do this ?
    Thanks.

    hi,
    Yeah, I just checked it..
    Its not possible in Std. SAP system...
    There is no field provided for the same...
    the other way, but doesn't applies to you...as you are doing massive job...
    still if req. then check..
    The other way is:
    Maintain Quotation and ref. it in inforecord...price gets updated easily from it...
    Regards
    Priyanka.P

Maybe you are looking for

  • Still frames got cropped when I exported to DV, how do I avoid this?

    I'm using iMovie HD 5.0.2. Made a film and used alot of still photos of bands with the name of the band zooming in and then a transition between each. In iMovie the photos were perfect but when I exported to my DV several of the photos were cropped.

  • EPM V10 issue : Install conflict between PCM 10 & BPC 10

    Our team is working on a prototype of EPM 10 solution (BPC 10 & PCM 10). We have met 2 conflicts between BPC 10 and PCM 10 at client side (Excel & Internet Explorer): 1. There are 2 separate EPM Add-in for Microsoft Office (Excel). One for BPC and an

  • About the stub generated by Jdev10.1.2

    hi, I generated the stub class by the Jdeveloper9i from the wsdl which is basic authentication, and it can invoke the web service. But when I updated the soap.jar from the Oc4j9.0.3X to the oc4j 10.1.2, the stub can not invoke the web service any mor

  • Class jreVerify.class not found

    My Java is not working correctly. Below are the details. If anyone can help . . . pleeeeeze! Thank you. Java Plug-in 1.6.0_21 Using JRE version 1.6.0_21-b07 Java HotSpot(TM) Client VM c: clear console window f: finalize objects on finalization queue

  • Use in new zealand?

    Hi, I have an Ipad2 and iphone and about  to travel to new zealand for a month. What is the msot cost effective way of being able to use it. We have a business contract with Vodaphone and they are telling me I need to sign up to a 12 month contract a