No video in monitor,but, audio plays when playing timeline CS5.5.1

In one sequence only, no video plays in monitor, but, audio is heard. What have I done ?
The same H.264 mov clips when set in new sequence plays ok ?

Thanks Ann & Glenn,
I accidentally hit Toggle Track Output "EYE" Key and, disabled the monitor, to the left of the Opacity handle, in 6 years on other Premiere Pro I have never done that , the darkened display did not help, even Automate to Sequence seemed to disappear in CS5.5.1. But, all is now well thanks to you both it gave me the clue.
Regards,
Bob

Similar Messages

Why would my video clips be running too fast when played on the monitor panel?

I posted my problem earlier today, but re-reading it maybe I didn't explain myself well enough.
My main question is: "why would my video clips be running too fast when played on the monitor panel ?". This is occuring after I have selected my media from the Tasks Panel and placed them in correct order in the Timeline/Sceneline. I knew something was wrong when I could see that the clips were not indicating their right length when viewed in the (expanded) timeline. They were compressed into just a few seconds, whereas the clips should have been at least 5 minutes. I ran the clips in the monitor and sure enough they ran too fast, with a lot of jerking movements.
The 3 video clips I am trying to make into a HD PAL video were taken with my Nokia N8 mobile video camera. These are in mp4 format. Can this present a problem ? Note that when I play these individual HD clips on my computer in (Windows Media Player) they run fine.
After I placed the clips in my Project Panel (or before in the Organize Workspace), I have perforned no change or manipulation of the clips. They are in their original state.
Just too confirm that the clips did seem to be compressed, I burnt a DVD, the resultant video ran in a matter of seconds.
Help would be greatly appreciated.

Yes, that is what the problem was.
Although the video camera on my Nokia N8, mobile was capturing at 25fps,
for some reason once transfered over to PrE9 (via file transfer), the clip was interpreted as 500fps. Once in Interpret Footage I was able to change the fps to 25.
Thanks for the help.

Youtube video is blank,but audio played well. other browser such as chrome got no problem with it. FF Developer Edition.

- youtube video just blank, but audio is there. tried both embedded in facebook or other website, and at youtube.com. both same result.
- facebook video played just fine
- other browser played just fine.. no problem at all..
- i'm on firefox developer edition
- tried installing latest flash update, still the same result.

This problem can be resolved by disabling hardware acceleration in your Flash Player settings. (See [[Flash Plugin - Keep it up to date and troubleshoot problems|this article]] for more information on using the Flash plugin in Firefox).
To disable hardware acceleration in Flash Player:
#Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
#Right-click on the Flash Player logo on that page.
#Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
# Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. <br/> <br/>[[Image:fpSettings1.PNG]] <br/>
# Remove the check mark from '''Enable hardware acceleration'''.
# Click '''Close''' to close the Adobe Flash Player Settings Window.
# Restart Firefox.
This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
Does this solve the problem? Let us know.

Audio Dropout when playing video

Hi,
I have been experiencing audio dropout when playing Youtube or any kind of video. I am currently using an audio interface (Focusrite Scarlett 18i6) connecting to my speakers. This has been going on for some time.
OSX 10.10.2
iMac (27-inch, Late 2013)
Processor 3.5 GHz Intel Core i7
Memory 32 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GTX 775M 2048 MB
Storage 500GB Flash Drive
Please help!!
Thanks and Regards

If you have menu's etc then the problem isn't one of video mode settings or indeed
connection/cabling.
Agreed.
Are the problems consistent (ie always the same files, or does a file sometimes play and not other
times)
Yes, also the intro screen doesn't appear at startup. (audio does). NitoTV (which uses mPlayer) works fine. Perhaps QuickTime is corrupt on it?
Have you played these files on the tv before.
Yes.
Do they play in itunes.
Yes, they play fine in iTunes - audio and video.
Thanks,
James.

Premiere cc 14 video is freezing but audio plays? Mac

I am in OS 10.9.3 3.5ghz intel for i7 iMac 32 gb memory, and timeline playback works for a while and then freezes, but audio continues to play. This is really slowing down the edit. Help Please? !

If Safari is the only browser you are having problems with dealing with QT see if the following is of any help:
To fix a QT related problem w/Safari, quit Safari & look in the /Library/Internet Plug-Ins folder (this is the Library folder at the root level of your HD, not the one inside your Users/user name folder).
Try removing the VLC Plugin.plugin (if you have it) & QT Plugin.plugin files from this folder, & then relaunch Safari. If the problem isn’t fixed, a different plug-in may be to blame. Keep removing files from this folder (start with any third-party plug-ins that are present) until the problem disappears.
Replace the plug-ins that don’t cause any problems.
MacAddict Magazine...12/06

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
Not necessarily. That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio. You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

BURNED DVD PLAYS WITH SOUND ON PC BUT NO SOUND WHEN PLAYING ON TV ???

BURNED DVD PLAYS WITH SOUND ON PC BUT NO SOUND WHEN PLAYING ON TV - VIA VIDEO PLAYER ??

Hi,
It may be worth trying another burning application to see if this helps the issue.
Download and install the free utility, ImgBurn and use this to create the DVD. Guides on using this to burn to single layer and dual layer discs are below.
Burning DVD Files To Single Layer Discs
Burning DVD Files To Dual Layer Discs
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

No audio output when playing flash player??

No audio output when playing flash player. Any suggestions? thanks.

Without going into detail on the DVD aspect of your question (ripping/decrypting a copyprotected DVD is illegal in some countries), what format is the audio in that file? Have you tried transferring (and then playing) any other video files, did they work?
Cat

I am having trouble with my speakers not working while online in particular on windows.My audio works when playing audio files

I am having trouble with my speakers not working while online particular on facebook. My audio works when playing audio files.

Hi,
Did it happen all the time or sometime?
Please check online browser status:
Click Volume icon in the taskbar, click Mixer link button as below:
If it's fine, follow this guide to run troubleshooter to detect and fix the issue:
Tips for fixing common sound problems
http://windows.microsoft.com/en-in/windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=windows-7
Meanwhile, this similar thread also could be referred:
https://social.technet.microsoft.com/forums/ie/en-US/a4a1cfe5-93a5-4c0b-9bf6-f7db0304f2ba/no-sound-on-youtube-or-any-other-webpage
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Purchased music videos from iTunes but it will not play, no video or sound

Purchased music videos from iTunes but it will not play, no video or sound. There were several vidoes on the purchase I made and two of the videos will not play the video or sound. I've checked to see if they were waiting for download and nothing is there. Any suggestions.

Is your iTunes account authorized for this computer in iTunes? - to check, open iTunes, and in the top menu bar, select "store", then "authorize this computer". How to Authorize iTunes - http://www.apple.com/support/itunes/authorization/.

TS1362 just purchased new cpu ,windows 8 recieved new updates and now I Tunes not play when play button hit.nothing happens??Rsvp please .time is fleeting:)

just purchased new cpu ,windows 8 recieved new updates and now I Tunes not play when play button hit.nothing happens??Rsvp please .time is fleeting:)

RealPlayer can cause conflicts with Flash Player because it tries to assign EVERY TYPE of video or audio file to itself by default. I haven't used RealPlayer in years for that reason. It's an unnecessary program anymore. There are apps loike VLC media player that cna do EVERYTHING it does without conflicting with other apps like Flash Player.
With WIndows 8, Microsoft began embedding FlashPlayer themselves into Internet Explorer. Because of that, you cannot download and install it from here. You cannot uninstall it from Internet Explorer without removing a specific Windows Update first. And you cannot update it via this website. ONLY through Windows Update can Flash Player for Internet Explorer be updated.
That said, you probably DON'T have a virus that's causing the problems with Flash Player and Internet Explorer. Many, many websites are not "recognizing" the browser.
This is a known problem with Internet Explorer 11, which Microsoft has been aware of since October 18 when they released IE11 The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player.
So far, Microsoft has made NO indication that they have any plan to fix it soon.
Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

No video playing in canvas or on monitor but audio is fine

I was setting chapters markers on the timeline for DVD export and somehow hit the wrong key so when I play the video on the timeline, the audio is fine and is heard on my monitor but the video doesn't appear in the canvas (black only showing) and shows only the first frame of the particular clip on my monitor. I checked video external settings and it is set to 'all frames'.
Any ideas how I screwed this up. It's in the settings as I went back to an autosaved version from 5 minutes previous and the same problem.
thanks for any assistance.

The key, btw, is w.
Patrick

MPEG-4 video gives still but audio plays FW 3.1.3

Hi, I have a Iphone 3GS 32 with 3.1.3 installed and discovered that MPEG-4 files don't play video and some H264 video stops after c.a. 40 seconds for c.a. 60 seconds.
I have tried to convert with Itunes, but Itunes gives the message that the fileformat is correct and does not have conversion neceserry.
Withe the MP4 issue the audio sounds good and my screen is displaying a stil with a green bar right below. On 3.1.2 everithing was all right. I have tried to downgrade to 3.1.2 but that is restricted.
I have checked the playing of the same files on my old 3G 16 with 3.1.2 and the files are playing well.
I also discovered with playing H264 files that the stop after ca 40 seconds for 1 minute and then go on. The movie time us running from 0:40 - 1:48 but audio and video stops. After the 1:48 the movie is continuing well????
In the Ipod discussions i saw same issue wit FW 3.1.3, but i have posted it also in the Iphone discussion.
Hopefully Aplle fixes this verry soon!!
THX in advance for any suggestion to make it work,
Wim

I have downloaded the latest Danuisoft DVD ripper and ripped the movies again and they run in 320*240 H264 and MPEG-4 format.
Strange that they run in the 3.1.2 FW and not in the 3.1.3 FW. Maybe someting to dow with the solved MPEG-4 flaw.
So now i have to convert my 30 movies again.
THX for your suggestion whatheck
I am concerning also the right choice of the 3GS. It is faster, but i get anoying messages about diverting when i call somebody, i have to convert my movies again. But stil its faster.
On my good old 3G that was jailbroken and i could customize al the anoying messages and now Apple is avoiding all this customizing by FW's that could not be customized. Why not an open system so that i can choose by miself as user of a beautyfull piece of technology that supports me on the road with Phone, Internet, AV, Entertainement and Land/Nautical Navigation aids.
So next sunday it wil be bad wether so that i can take the time to do the converting work.
THX a lot,
Wim

Trying to stream a QT video on the web but audio does not play

I've created an hour-long .mov exported out from FCP using QT conversion. I've saved the file to our sever but when you click the link on the web page the video plays great but there is no audio. When you go directly to the file on the server and open it, it plays just fine. Is this an export issue or a server-side issue?
G5 Mac OS X (10.3.9)

I am exporting out as a QuickTime Movie format with H.264 compression. I've selected prepare for internet streaming and chose Hinted Streaming. It asks if you want it Optimized for Server or Make it Self-Contained. I've actually done it both ways and I can't tell any difference. We are playing the clips through QuickTime Player. Our server is a Windows 2003 R2. I talked with our IT guy about this and he seems to think that it possibly has something to do with the way I have the bit rate set up. Honestly, I am just using the default rates because I have no idea what to set them at.
Thanks

Program monitor constantly freezing/stalling when playing dynamically linked After Effects comps

I'm having program monitor issues when I try to play dynamically linked After Effects comps from my Premiere timeline. I realize it's expected to have jerky playback since After Effects comps are memory and CPU intense, but it doesn't seem normal for these things to happen:
Sometimes during playback, the program monitor completely freezes while audio continues to play and the CTI continues to move along timeline. When this happens, there's no way to stop the playback at all using mouse or keyboard... so I'm forced to just quit Premiere and re-open project.
Program monitor can also freeze when I place the CTI on top of the After Effects comp. Sometimes if I wait a minute, the screen could update and eventually display the After Effects comp.
I'm unable to render effects on the Premiere timeline because it just hangs at "Rendering frame 0" and never advances forward.
There's nothing special about the After Effects comp I'm linked to... it could just be regular text that I animated using ease keyframes and motion blur.
I originally thought it was related to GPU settings but it doesn't make a difference if I set After Effects to use CPU instead of GPU or set Premiere's Mercury Playback engine to software, CUDA, or openGL. I even have the latest CUDA drivers installed on my Mac. But I must mention that this issue got significanly worst after updating to OSX 10.9 Mavericks.
Here's my system details:
OSX 10.9 Mavericks
Premiere 7.0.1 (105)
After Effects 12.0.1.7 (I installed the OS X Mavericks crash update fix)
The most prevalent error messages displayed in the OSX console is:
Adobe Premiere Pro CC[402]: dynamic_cast error 1: Both of the following type_info's should have public visibility. At least one of them is hidden. N5dvaui2ui8MessageTIKNS0_7UI_NodeEEE, N5dvaui8controls23UI_PictureSupplyMessageE.
Here's a few that are less common:
Adobe Premiere Pro CC[402]: [PremiereCocoaMacApplication handleMenuCommand:1633841013 from <DVAMacMenuItem: 0x6100002f8300 About Premiere Pro>]
After Effects[377]: -[NSMenu menuID]: unrecognized selector sent to instance 0x600000077080
If anybody has any ideas or suggestions, I would really appreciate it.
Thanks,
-Pete

I think I found the problem... OSX Mavericks introduced a power saving feature called App Nap that basically slows down an app that appears to be doing nothing or is minimized in the background.
So essentually when I try to display an After Effects dynamically linked comp via my Premiere timeline, it freezes because OSX put After Effects to sleep.
To fix this, I had to disable the App Nap feature on After Effects. Now everything is performing back at pre-Mavericks levels (which is about 10% stalling playback issues vs 90% stalling). I also noticed that all of the console errors went away.
To disable App Nap in OSX...
Go to your Applications folder
Expand the After Effects CC folder
Right-click on "Adobe After Effects CC.app" and select Get Info
Add a checkmark beside "Prevent App Nap"
Restart the application
I also did this with all my Adobe apps just to be safe.
Hope this helps
-Pete

No video in monitor,but, audio plays when playing timeline CS5.5.1

Similar Messages

Maybe you are looking for