No video output to extended monitor

Is there an known fix for the Mac Book Pro when the video-out port on the side ceases to function?

if i use an iPad to control it gives me full control to advance on click
Please clarify;   you use the iPad remote control feature to advance manually a presentation on your Mac, or you are playing the presentation on your iPad.
Did you create the presentation on the Mac yourself and what version of Keynote did you use?
Try this test:
create a new blank presentation then drag and drop (do not copy and paste) four slides on to the navigator panel in the blank presentation
the Navigator panel is the view of slides in a column on the left hand side of the canvas.
check the settings are set for manual play as I described before:
Inspector > Document > Document > Presentation Type:     change to Normal
select all the slides in the navigator then;    Inspector > Animate > Start Transition:     change to On Click
click the video on the slide then;     Inspector > Animate > Build In > build order button > change drop down menu to: on click
if the presentation plays manually, drag and drop the remaining slides over.

Similar Messages

Video Output to NTSC monitor

I recently got new furniture, so of course, I unhooked everything and moved it around, and now, for some reason, I can't see video on my NTSC monitor. I know everything is hooked up correctly because I can log and capture and see video on the monitor; the video captures correctly with audio and everything. But when watching video in the timeline, there's nothing happening on the monitor. Any suggestions? Has this happened to anyone else?
I have switched out firewire cables, rebooted the computer, etc. I'm so confused!

#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

Video Output to TV Monitor

Hi
I have a Miglia directors cut and am trying to output my floating movie onto a tv monitor. Following intructions from the manual I go to song settings and change the video output from Window to FireWire. Doesn't work. It seems as if logic isn't seeing the Firewire. The Miglia works well for outputting video in Final Cut Pro, where the app. has a 'refresh a/v devices' option which kick starts the Miglia. Does logic have anything like this?
Any help would be appreciated.
ta

I use a dc30 personally, brilliant old card.
I reckon it may be a diveo format problem. play the QT video in Quicktime. does it play back on the TV? if it does then it should play back in logic no problem. if it doesn't, then you might need to convert the video to dv streaming (which is different to dv which final cut pro uses). i am no expert in this area, but until somebody more knowledgable posts then i would say QT format issue is your problem.

Hetis 865GV video output to two monitors

Does anyone know how to set the Hetis 865GV to output simultaneously to the VGA port and to either DVI or S-Video to display the same output on two monitors?

well i dont have an 865 , but that is handled by my video card.
try reading up in the features of that, using a short alt f something key to turn on 2nd display. may have to set it up under video card propertes, an click a check box under tv.

What do you need to get video output to external monitor

Hello,
I'm fairly new to Color and have read a few posts that color can't be viewed by firewire to an external monitor. Basically what I have right now for external viewing in FCP is a JVC SR-VS30 Mini DV NTSC deck with firewire connected to my computer. From the deck it goes to a small TV set and a Sony Trinitron PVM color video monitor. What do I need extra to be able to see my color correction in Color on an external monitor. BTW in Color currently the Video Output tab in Setup>User Prefs is grayed out showing Disabled. I suppose that when I get whatever I need to see Color on an external monitor that this tab would NOT be grayed out or would I have to set some other settings.
Thanks.

Well, you can waste a lot of time and money trying to get your old iron up to speed but the sad fact is, even though it may work with Color, it will most likely end in a less than satisfactory experience all around. You need to determine if your G5 has PCI, PCI-x or PCIe slots and then purchase the appropriate cards.
However, Final Cut Studio 2 is optimized for the Intel processors. You will see users here and there using the newest models G5 with great success but quite honestly, you need a Mac Pro.
Or just purchase the Aja IO/HD which is a firewire 800 interface and the only firewire device that will preview externally Color.

No video output to ext monitor in rehearsal mode

(My whole presentation is made up of video and stills)
Hi, when I'm in rehearsal mode (Keynote 6.5.2) i cannot get full screen video output to my ext monitor. It is only a black screen. In 'play mode' the presentation plays fine and it will give me full screen video but then i have no control of the presentation as it just plays out to the length of the clips used in each slide. I managed to save as a Powerpoint presentation which allowed me to use the play function and control it manually but i could not see the current slide playing in the presenter display. It also wiped all my trimming settings of the videos i am using.
Is there a way to run my presentation in rehearsal mode and have full screen video outputed to an external monitor and see my current slide playing on my presenter display.
My whole presentation is video and stills.
I am using an iMac, 2.9GHz i5, 8GB Ram, OS X Yosemite 10.10.1.
Thanks in advance
Jason

if i use an iPad to control it gives me full control to advance on click
Please clarify;   you use the iPad remote control feature to advance manually a presentation on your Mac, or you are playing the presentation on your iPad.
Did you create the presentation on the Mac yourself and what version of Keynote did you use?
Try this test:
create a new blank presentation then drag and drop (do not copy and paste) four slides on to the navigator panel in the blank presentation
the Navigator panel is the view of slides in a column on the left hand side of the canvas.
check the settings are set for manual play as I described before:
Inspector > Document > Document > Presentation Type:     change to Normal
select all the slides in the navigator then;    Inspector > Animate > Start Transition:     change to On Click
click the video on the slide then;     Inspector > Animate > Build In > build order button > change drop down menu to: on click
if the presentation plays manually, drag and drop the remaining slides over.

PPro CS5 no Video output to external monitor

I am using Pr Pro CS5. I have a Sony HDV DVCAM deck (HVR-M25U) that is plug into my computer with firewire, then from my deck I have a JVC DT-V20l1 HD monitor with companent cables.
In PPro under the program monitor, I put the plackback to show the deck.
On the deck the iLink is turn off. (no video with it turned on as well).
I worked on one project and the video was there in the ext. monitor. Opened an old project that I was working on before and there is no video on the monitor.
The settings have not been changed. the only difference is a brand new edit system, but I had video plackback.

Colin,
I don't know if i am using MPE/GPU acceleration.
I have an Dell XPS 9100 Computer.
3.33 ghertz
24 gigs of ram
Quadro 4000 graphics card.
I figured that if CS5 had all the requirements. Mercury Engine playback, rendering would just be screaming on this machine. It works great, Multi layers of video seem to take a bit longer to render, but no video through the deck and on my ext hd monitor.
it was once there, now it is gone. I have updated PPro with all the updates.

Distribute video output over three monitors (+ another)

Hi there,
I've got a triple beamer setup + a Cinema Display. My Mac Pro has two ATI Radeon HD 2600 XT cards. What I need to do now is use the monitor as an operating monitor and combine/distribute the triple beamers in such a way that I can play one 1920 x 480 video file over all three monitors simultaneously, for an event.
The two ATI 2600 cards are especially in there to be able to do this, but when I try to combine the monitors through display settings or through the Quicktime settings, it just doesn't seem possible. VLC won't play my ProRes 422 material, but I could re-render off course when the video is done.
Is my only option a bloody €200,- video splitter, or can I do this 'the software way?'. I find it so hard to imagine that what I want wouldn't be possible with all the hardware power I've already got! Friendly greetings, Douwe.

If you click the "?" in the "Arrangement" tab of "Displays" system preference, it will tell you how to set three out of the four displays to mirror mode, leaving the fourth separate.

RE: Video Output to TV Monitor

Hi people. Im using logic express 7, mostly for audio only but now I need to edit the audio of a short film. I have a canopus advc 100, but could not find where in song settings is the option to play the video to it. So I was wondering if logic express does support this feature, anybody knows?
Pepo

I use a dc30 personally, brilliant old card.
I reckon it may be a diveo format problem. play the QT video in Quicktime. does it play back on the TV? if it does then it should play back in logic no problem. if it doesn't, then you might need to convert the video to dv streaming (which is different to dv which final cut pro uses). i am no expert in this area, but until somebody more knowledgable posts then i would say QT format issue is your problem.

Clips from Project bin to source monitor causing video output to go out of sync(CS6 and CC)

Any footage I double-click or drag from the Project window to the Source monitor causes my video output to go out of sync. When I put the clips in the timeline, video goes back in sync and I'm able to view video output. My monitors are connected to a Blackmagic Intensity Shuttle Thunderbolt(9.7.5) via component and HDMI. Is this normal behavior in Premiere or is there a setting to enable this? No issues doing this in FCP7(clips from Project window to Canvas).
Can someone with an I/O from AJA, Matrox, or Blackmagic please test this out for me. Thanks...
2012 Macbook Pro
MacOS 10.8.3

Hi Joe,
How do you have your audio setup? Try the following.
- Set your OS system sound to Built-in or Line out audio
- Select Blackmagic for both Video and Audio in Preferences> Playback
- Select System Default Input/Output from Preferences> Audio Hardware
Hope this helps,
Peter Garaway
Adobe
Premiere Pro

Blackmagic Intensity Shuttle Thunderbolt video output issues

I got Intensity Shuttle TB to output to my monitors via hdmi and component however I am getting latency issues. I've tried all the settings in the system preferences as well as inside Premiere Pro. Also, when viewing a clip in the source window, video output disappears. I've tried the latest drivers as well as the older ones and reinstalled Premiere. Would like to resolve this asap! I tested the Intensity Shuttle with Final Cut Pro 7 and it's as smooth as butter and I'm able to view video output while in the source and programs windows. Is this an Intensity Shuttle issue or an Adobe Premiere issue?--->No video output to monitors while in the source window...Latency issues while viewing video in the timeline/program window. AVCHD Footage....
Macbook Pro 2012 8GB RAM MacOS 10.8.3 Premiere CS6 6.0.2 BlackMagic Intensity Shuttle Thunderbolt 9.7.2 DesktopVideo Driver

OK, got one part solved. I uninstalled Blackmagic's Desktop Video 9.7.2 and reverted back to Desktop Video Driver 9.6.9. Everything is smooth now...no latency/dropped framed looking video.
The only other thing I'm trying to resolve now is video output while viewing a clip in the source monitor. When I double click a clip in the timeline to view in the Source monitor I'm able to view video output to my hdmi and component monitors. However, when I double click a clip in the Project window to view in the Source monitor, both hdmi/component monitors go out of sync with no video output.
ie: clip from timeline viewed in Source monitor: I'm able to see video output
clip from Project Window viewed in Source monitor: No video output
Update: When I double click on a 720x405 .jpg from the Project window to view in the source window, i'm able to view video output to both monitors(hdmi/component). On a 960x720 .jpg, no video output from the source window.
Pretty strange and I hope this info is making sense to Adobe Support. Would appreciate feedback on resolving this issue! I'm hoping this is a simple Adobe Premiere setting that I might've missed.
NOTE: Desktop Video Driver 9.6.8 also has smooth playback but I installed 9.6.9 since it is the last update of version 9.6.

Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1: Is there any way of fixing this? I've tried

Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz
The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1:
Is there any way of fixing this? I've tried the usual: triple checked all vga cables & devices through trial & error. Bought a new DVI-VGA adapter. Reset PRAM, PMU, etc. Nothing works. Something is probably damaged, because my KVM switch was not working unless I hot-reseated the vga cable into it, leading to this DVI port, and that is pretty rough stuff.
Question 2 (related):
This dovetails into this: Can I drive a VGA monitor with the s-video output port on this computer. It would take an s-video (male)-to-15-pin-VGA adapter. Has anyone does this? So far, I haven't even found the adapter mentioned anywhere.
Thanks for reading this.
el7

Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
-USB-to-VGA
http://www.cablestogo.com/product/30545
-Convert s-video or composite video signals to high resolution VGA
http://www.cablestogo.com/product/40971
The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
el7

Is it possible to output to div monitor and s-video at the same time?

I'm editing video and want to see the broadcast results on the fly (ie monitor and tv side by side, same image onscreen). Is it possible to output to div monitor and s-video at the same time? Maybe thru a splitter cable. I'm concerned about resolution issues.

This is not possible with a mini.

While multi-camera monitor is open video output looks strobed

While the multi-camera monitor is opne the video output to my DV deck looks strobed and soft. Any ideas? I have CS 6 with a Sony DV deck on a MacPro 5,1. When I close the multicamera monitor the video on the output monitor becomes sharp again. This is simply unnacceptable as I need to see the video in full rez while playing back.

The multicamera monitor has always had an "adaptive resolution" when it comes to playback, meaning the resolution would degrade if it needed to (based on your system's capabilities) in order to keep up real time playback, which is more critical for multicam editing than full res playback.

External monitor: problem to enable video output

Hello,
I try to use an external monitor.
I usually use it by a camcorder and a Firewire PAL in FCP without any problem.
In Color, if I go in User preferences, Video output is set on disabled and the others (for example Digital Cinema preview or Firewire Pal) are all gray and I cannot set them.
Thank you for your help.

Luca,
Please refer to the included documentation. Color does not and will not send external video through firewire to any device, save one, and that is the Aja IO HD and then that device is limited to standard definition video only.
This "issue" has also been well covered in this and other forums: you need an input/output card manufactured by [Aja|http://www.aja.com/html/products_macintosh.html] or by [Blackmagic Designs|http://www.blackmagic-design.com/products>.

No video output to extended monitor

Similar Messages

Maybe you are looking for