No way to have 360 sequences inclined ?

It looks like it's not possible to have a 360 images sequences inclined (like, 15° or whatever).
Even if the block is inclined on INDD, once it's viewed on the Desktop Player, it's just not inclined.
Of course i can incline the items that are in the pictures but erm ;-)

Thank you Barney.
I just installed the trial version of Pathfinder. I have to say that my first impression is very good. I hope very much that Apple is watching it, and will upgrade Finder to have most, if not all, of its many many interesting features.
I am not sure the $40 price tag is justified though - although they probably deserve their fair share of profit from innovations that exploit the rare Apple goof-up.

Similar Messages

I would like to build I data base in teststand which collect data from labview , if you have example (sequence) that give me some way to build sequence

I would like to build a data base in teststand which collect data from labview program , if you have example (sequence) that give me some way to build sequence that have step of action for labview and step
data base

There is an example in the \TestStand\Examples\Database directory. Basically there are two ways to connect to your database.
1. You can use the TestStand database step types. There are steps for opening/closing a database connection, opening/closing an SQL statement, and a step for performing a data operation.
2. The other way is to use the TestStand database logging capability to write your results to the database. This is the way I would recommend. With database logging, you use the step results container to record all your results as the sequence runs. (This is done automatically by TestStand). When the sequence is complete, the process model calls a "Log to Database" sequence that will write the results to the database. You must define your datab
ase schema using Configure->Database Options. There are some default (or example) schema definitions already defined. Refer to chapter 18 of your TestStand manual.
Another way to log the data as the sequence is running is shown in the \TestStand\Examples\OnTheFlyReports. This has the advantage of recording data as it is obtained, but it is not as efficient in terms of using a database connection. I don't recommend using this method.
Please post again if you have any more questions. If you are using stored procedures with your database, I can probably give you some tips.
Mark

I have a sequence with 50+ clips, export each separately?

I have a sequence with 50+ clips, each separated by a small gap, can premiere 'scene detect' and export each as a separate file, or do I need to manually adjust the work bar to each each clip and then export?

You could do a project manage, set it to trim clips with no handles to a new location. You'll then end up with a folder full of clips, if you want those converted to a specific output format you can just do a batch export of this folder. It's a very autopilot way of achieving a result, but if there's any effects or re-sizing done to the clips this method would not work.

Is there a way to start a Sequence with Task Manager (Windows)

Hi
Is there a way to start a Sequence with Task Manager (Windows)?

Hi,
That is too bad I can not schedule my action Wizard to run via Windows scheduler... The funney things about is that on the same machine that I have created the Action Wizard and saved to to my desktop via export, when I click on it to run it asks me you want to Import that action to your Acrobat Pro X? Okay or Cancel... That Action is already there in my action Wizard List and I have exported from this same machine and I was trying to see if I can schedule it via this command:
C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat <C:\Users\Bahram\Desktop\OCRFaxedPDFs.sequ
Regards,
Jeff P.

I have a sequence shot on the 550d/rebel T2i, I converted it to prores 422 and edited in fcp. What is the best export that i can do to preserve quality and prevent pixelation.

i have a sequence shot on the 550d/rebel T2i, I converted it to prores 422 in MPEG Streamclip and edited in fcp. What is the best export that i can do to preserve quality and prevent pixelation. Rite now, i have been just clicking on the export to quicktime function, but the quality of the footage is completely reduced and colours look desaturated and there is pixellation compared to the original camera footage. Also is there anyway i can render and export the sequence using the original footage (like an online edit or something). Also is there anyway to upgrade the final quality. I have Compressor, Dvd Studio pro, Motion, Color and Cinema tools, i dnt know if they are of any use to me and have no idea how to use hem or what they are for also.

>What is the best export that i can do to preserve quality and prevent pixelation
The best way to export is entirely dependent on what you plan to do with the exported video. For example, if you plan to go to DVD, the export process is different than if you plan for web delivery or for iPhone viewing. Compressor has presets for most final delivery formats ... start with those.
>is there anyway i can render and export the sequence using the original footage
Yes. In FCP, go to File-Export->QuickTime Movie. Check the box to make the movie Self-Contained and use Current Settings. Do NOT "Recompress All Frames." The resulting self-contained movie will play on any Mac that has the needed audio and video codecs installed.
>is there anyway to upgrade the final quality
No and maybe. While you technically cannot improve quality over the original, you can possibly 'enhance' the aesthetic quality of the video using various filters in FCP or Color.
-DH

RE: Is there a way to have 2 network cards on the samemachine

Sean,
I mean I am always connecting to the nodemgr of the 2nd environment
successfully. Only when I run the client part of the application that I know
is up, I get a response from the Name Server that it is actually the first
IP address.
I checked again. I defenitely have FORTE_NS_ADDRESS set to IP:5004, in my
case, and not the hostname. I don't have FORTE_LOCATIONS set any where. the
NS_ADDRESS for env2 has only 1 IP address associated with it. My Forte
Control Panel on the client, and hence the NS address has only one entry.
I tried going into escript like you said, and the name service still thinks
it is IP1.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Monday, June 22, 1998 1:31 PM
To: Venkat Kodumudi; 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Hmmmm? That is a little odd! Let me rehash what I think you are saying.
You now have two environments each with their own name service with
FORTE_NS_ADDRESS set to a different IP:Port combination. For example you
are doing the steps:
FORTE_NS_ADDRESS=255.255.255.1:5000
start the nodemgr for env 1
FORTE_NS_ADDRESS=255.255.255.2:5000
start the nodemgr for env 2
Now when you start a client you are always getting the address for env 1
back from the nodemgr. I assume you actually mean the name service? Or, do
you mean you are always connecting to the nodemgr & name service for env
1?
If the first scenario is the case and you are connecting to the nodemgr
for
env 2 but getting back IP's for services listening on the card for env 1 I
would ask you what you are setting the FORTE_LOCATIONS value to before you
start each service. If you are not setting it or are using the host name
it
will register using the IP for the primary network card associated with
the
machine name and I am again assuming that this is env 1. You need to set
the FORTE_LOCATIONS variable to 255.255.255.2:0 (based on the steps above)
before starting your services.
If the second scenario is the case I would have you check what the
FORTE_NS_ADDRESS is set to before you start up the client. Once again it
must be the IP:Port combination not host:port combination if you want to
get
anything other than the primary card.
I would also suggest that you do the following. After everything is up
and
running execute the following commands:
escript -fns "ip for env1":port
findsub nameservice
showpart
What you should see is everything currently registered under the name
service. It will have the name and any "locations" (IP and port) that it
is
registered as listening on. I would look for the nodemgr and see where it
has advertised itself. I would then look for any services you expect to
be
registered there and also verify where the have advertised themselves. If
there are multiple locations listed for any one service, the client will
use
the first one in the list.
Do the same for env 2.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:57 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
I am giving the actual IP address. and not the host name. That is why I
don't understand what is going on.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Monday, June 22, 1998 10:53 AM
To: Venkat Kodumudi; 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Hello Venkat,
I probably should have mentioned this before. Your are correct. Forteis
doing a host lookup if you are providing a name for examplemachine1:5000.
You can bypass the host lookup by using the actual ip dot addressinstead
for example 255.255.255.255:5000. This way you are taking the name
service
out od the picture and Forte will use the address provided.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:27 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
My requirement is that my second card serves as best case performance
testing piece. This eliminates the network completely. We went one step
ahead and created a new enviromnent for the second card. Whatever I do,
the
nodemgr is returning back the IP address of the first card, even thoughmy
FORTE_NS_ADDRESS does not have the first card in the picture any where.
I think Forte is doing a host look up and returning the first IP address
it
finds, as opposed to returning the IP address specified in theenvironment
variable FORTE_NS_ADDRESS. Is there a way to trick it?
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Thursday, June 18, 1998 9:54 AM
To: Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
OK, you ran into one of the issues. That is, if both addresses areknown
to
the client that is trying to contact the partition it will always usethe
first address in FORTE_LOCATIONS. This is because FORTE_LOCATIONS was
designed more as a failover mechanism. So it will always try the
first
address in the list and if it succeeds, there is no reason to move onto
the
second.
Now, the second issue is that there is currently a problem with theclient
failover to the secondary address in FORTE_LOCATIONS. If the firstentry
fails it is supposed to retry on the second entry. Instead, it
retries
the
first entry again. I know that Forte knows about this but I do nothave
a
bug number on it.
With that said, lets look at a possible solution for you. If the real
objective here is to have a back up network card available for fail
over
on
the same machine, or use one card to advertise outside your firewalland
one
to use inside, then you will have to contact Forte to determine whenthe
failover problem will be fixed. But, if the objective is to loadbalance
across the network cards you could have the environment manager listenon
both ports and then alternate your server partitions across both
cards.
For
example:
set FORTE_NS_ADDRESS=card1:5000;card2:5000 and then start up the
environment
manager
set FORTE_LOCATIONS=card1:0 (the 0 in the port causes the OS to pick a
port)
and start partition one
set FORTE_LOCATIONS=card2:0 and start partition two
and so on....
In this scenario the environment manager will be listening on bothcards
but
each server will be listening on only one of the two cards. So if a
request
comes in for partition1 it will go through card one and if it is for
partition two it will go through card two. You could assign your
partitions
to cards based on expected load.
Well, I am done. I hope this helps!
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Thursday, June 18, 1998 8:06 AM
To: 'Sean Brown'; 'John Jamison'
Cc: [email protected]; Jose Suriol
Subject: RE: Is there a way to have 2 network cards on the samemachine
Sean,
Thanks for your reply. I tried the approach. I was not very specificin
my
question. I do need the ability for server applications to listen and
server
on both the network cards.
I was succesfully able to make the nodemgr listen on both the cardsand
actually serve requests coming in from both the cards. But, followingyour
advise, I took a cautious step with FORTE_LOCATIONS. Here is what I
noticed.
I have an application that has 6 partitions in total. I used
FORTE_LOCATION
to make it listen on 1. Both the cards. 2. Swapped the IP addresses
for
both
cards for this application. 3. One card that I want it to listen on. I
tried
all approaches by exporting the locations variable for just this
application. The nodemgr recieves a request from this pc connected onthe
second card to talk to one of the partitions. The node mgr responds
with
a
proxy - with the ip address and socket number of the first card. The
FORTE_NS_ADDRESS variable looks like this:
IP1:5002;IP2:5002.
Is it possible atall to resolve my problem, without having a seperate
environment?
Thanks
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Wednesday, June 17, 1998 10:42 AM
To: 'John Jamison'; Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the
same
machine
Venkat,
Actually, it is possible for Forte to listen on more than one IP andport
combination. The first reply to your message was correct. If you
set
the
FORTE_NS_ADDRESS to contain multiple entries before starting the
name
service, it will advertise on both. For Forte servers you use the
FORTE_LOCATIONS env variable to get it to advertise on multipleip:port
combinations.
We were doing something very similar with another customer I was at
to
get
around a firewall. I will warn you that there are some issues with
FORTE_LOCATIONS that may keep that portion from working. However,
from
reading your note, it appears that all you need is for the nameservice
to
advertise and listen on multiple ports and that works fine. I justtested
it again for sanity sake and it worked. I ran my test on NT using
Forte
3G2.
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of John Jamison
Sent: Tuesday, June 16, 1998 4:51 PM
To: Venkat Kodumudi
Cc: [email protected]
Subject: Re: Is there a way to have 2 network cards on the samemachine
Venkat,
Technically yes this is possible, though not in Forte. A nameserver
can
only listen on one port.
To implement this scheme you will have to write a proxy service (insome
language
including perhaps forte) which listens on the well-known port on the
second card, reads requests, then forwards them to the realnameservice
(wkp on the first card), and forwards replies back. This is not
trivial, but some firewall toolkit vendors supply stub code to write
application specific proxies.
-J
Venkat Kodumudi wrote:
Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have
2
ip
addresses, and the connection between the two is the unix box and
only
the
unix box. I have a pc connected to the 2nd network card and I want
it
to
connect to the nameserver that is listening on a well known port
on
the
first network card. We don't want to turn IP forwarding between
the
two
cards. We want Forte to address both cards to talk to clients, in
one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>>>
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
<a href=
"http://www.sageit.com">http://www.sageit.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Hello Venkat,
I probably should have mentioned this before. Your are correct. Forte is
doing a host lookup if you are providing a name for example machine1:5000.
You can bypass the host lookup by using the actual ip dot address instead
for example 255.255.255.255:5000. This way you are taking the name service
out od the picture and Forte will use the address provided.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:27 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
My requirement is that my second card serves as best case performance
testing piece. This eliminates the network completely. We went one step
ahead and created a new enviromnent for the second card. Whatever I do, the
nodemgr is returning back the IP address of the first card, even though my
FORTE_NS_ADDRESS does not have the first card in the picture any where.
I think Forte is doing a host look up and returning the first IP address it
finds, as opposed to returning the IP address specified in the environment
variable FORTE_NS_ADDRESS. Is there a way to trick it?
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Thursday, June 18, 1998 9:54 AM
To: Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
OK, you ran into one of the issues. That is, if both addresses are known
to
the client that is trying to contact the partition it will always use the
first address in FORTE_LOCATIONS. This is because FORTE_LOCATIONS was
designed more as a failover mechanism. So it will always try the first
address in the list and if it succeeds, there is no reason to move on to
the
second.
Now, the second issue is that there is currently a problem with the client
failover to the secondary address in FORTE_LOCATIONS. If the first entry
fails it is supposed to retry on the second entry. Instead, it retries
the
first entry again. I know that Forte knows about this but I do not have a
bug number on it.
With that said, lets look at a possible solution for you. If the real
objective here is to have a back up network card available for fail over
on
the same machine, or use one card to advertise outside your firewall and
one
to use inside, then you will have to contact Forte to determine when the
failover problem will be fixed. But, if the objective is to load balance
across the network cards you could have the environment manager listen on
both ports and then alternate your server partitions across both cards.
For
example:
set FORTE_NS_ADDRESS=card1:5000;card2:5000 and then start up the
environment
manager
set FORTE_LOCATIONS=card1:0 (the 0 in the port causes the OS to pick a
port)
and start partition one
set FORTE_LOCATIONS=card2:0 and start partition two
and so on....
In this scenario the environment manager will be listening on both cards
but
each server will be listening on only one of the two cards. So if a
request
comes in for partition1 it will go through card one and if it is for
partition two it will go through card two. You could assign your
partitions
to cards based on expected load.
Well, I am done. I hope this helps!
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Thursday, June 18, 1998 8:06 AM
To: 'Sean Brown'; 'John Jamison'
Cc: [email protected]; Jose Suriol
Subject: RE: Is there a way to have 2 network cards on the same machine
Sean,
Thanks for your reply. I tried the approach. I was not very specific in
my
question. I do need the ability for server applications to listen and
server
on both the network cards.
I was succesfully able to make the nodemgr listen on both the cards and
actually serve requests coming in from both the cards. But, following your
advise, I took a cautious step with FORTE_LOCATIONS. Here is what I
noticed.
I have an application that has 6 partitions in total. I used
FORTE_LOCATION
to make it listen on 1. Both the cards. 2. Swapped the IP addresses for
both
cards for this application. 3. One card that I want it to listen on. I
tried
all approaches by exporting the locations variable for just this
application. The nodemgr recieves a request from this pc connected on the
second card to talk to one of the partitions. The node mgr responds with a
proxy - with the ip address and socket number of the first card. The
FORTE_NS_ADDRESS variable looks like this:
IP1:5002;IP2:5002.
Is it possible atall to resolve my problem, without having a seperate
environment?
Thanks
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Wednesday, June 17, 1998 10:42 AM
To: 'John Jamison'; Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Venkat,
Actually, it is possible for Forte to listen on more than one IP andport
combination. The first reply to your message was correct. If you setthe
FORTE_NS_ADDRESS to contain multiple entries before starting the name
service, it will advertise on both. For Forte servers you use the
FORTE_LOCATIONS env variable to get it to advertise on multiple ip:port
combinations.
We were doing something very similar with another customer I was at toget
around a firewall. I will warn you that there are some issues with
FORTE_LOCATIONS that may keep that portion from working. However, from
reading your note, it appears that all you need is for the name serviceto
advertise and listen on multiple ports and that works fine. I justtested
it again for sanity sake and it worked. I ran my test on NT using Forte
3G2.
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of John Jamison
Sent: Tuesday, June 16, 1998 4:51 PM
To: Venkat Kodumudi
Cc: [email protected]
Subject: Re: Is there a way to have 2 network cards on the same machine
Venkat,
Technically yes this is possible, though not in Forte. A name server
can
only listen on one port.
To implement this scheme you will have to write a proxy service (in some
language
including perhaps forte) which listens on the well-known port on the
second card, reads requests, then forwards them to the real nameservice
(wkp on the first card), and forwards replies back. This is not
trivial, but some firewall toolkit vendors supply stub code to write
application specific proxies.
-J
Venkat Kodumudi wrote:
Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have 2ip
addresses, and the connection between the two is the unix box and onlythe
unix box. I have a pc connected to the 2nd network card and I want it
to
connect to the nameserver that is listening on a well known port onthe
first network card. We don't want to turn IP forwarding between thetwo
cards. We want Forte to address both cards to talk to clients, in one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
<a href="http://www.sageit.com">http://www.sageit.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Is there any way to have Mail automatically use our default "Sent" folder?

We are a small college, with a fair number of users who use Macs and iOS devices, and we run an IMAP mail server. By default, our accounts are configured with Sent, Trash, Drafts, and Junk folders. Apple's Mail.app insists on "Sent Messages" and "Deleted Messages" rather than "Sent" and "Trash".
We instruct our users to use the menu command Mailbox > Use This Mailbox For > commands to select our server's folders on their desktops, and on iOS to use the Settings > Mail > Account > Advanced, but this is tedious and annoying. Most users get it about half right, so that some devices use our default "Sent", and some use "Sent Messages". (This happens with Trash as well, but most users are not concerned if their Trash differs device to device.)
Is there any server setting that can hint to Mail.app that it should use "Sent" rather than "Sent Messages"?
Apple has a support document about this issue, "Mountain Lion Mail: If messages aren't stored where expected on the server" ( http://support.apple.com/kb/PH11810 ).
However, that doc (and the similar one for Snow Leopard) merely says, "When Mail stores messages on the server, it looks for specific mailboxes, by name, in which to put the messages. If Mail doesn’t find those mailboxes on the server, it tries to create them on the server or, failing that, on your Mac."
The document does not specify what the "specific mailboxes" are, and certainly does not suggest that there is any way to have it cooperate better with our server, but perhaps there is a way?
(If I was trying to be a good IMAP client, I might look for any of "Sent", "Sent Messages", or "Sent Items", and use what I found before going to the next step of creating my own folder. Hard to imagine that any IMAP account would be initially configured without some "Sent" folder, so why not try to discover what the user has before pig-headly making your own.)

Unfortunately, I have not found a consise way to explain this to the general user, just a huge wall of text to work around something that Apple got wrong the first time they created an IMAP client, and has stubbornly persited with. Here's our documentation for this silly problem:
Special Folders on IMAP
The basic idea is that all IMAP mail programs keep all your mail on our server, so that, e.g. when you read or reply to a message, all of your devices can then show that message as read and replied to.
By convention, each IMAP program treats a few folders on the server as "Special", such as a "Trash" folder, that deleted messages get moved to, and a "Sent" folder, where each message you send gets copied. When they all pick the same special folders, all of your devices will show the same view of your mail. However, if different devices use different server folders for their "special" Sent folder, then the mail from these two devices will wind up in two different places, and be harder to find.
Unfortunately, Apple's Mail programs are particularly obscure and obtuse in the way they treat these folders: They show their special Sent and Trash folders on screen with the obvious names "Sent" and "Trash", but secretly, under the covers, they insist on using folders named, "Sent Messages" and "Deleted Messages" instead. Even if the server already has perfectly usable "Sent" and "Trash" folders, Apple clients will ignore them and create their own special case "special" folders.
If you only ever use Apple devices to look at your IMAP mail, you might never even notice their deception. But, if you sometimes use another mail client, such as webmail, you will encounter the confusing truth: When we created your account for the very first time, we add a "Sent" folder (actually named "Sent") and a Trash folder, named "Trash", and this is what everything except Apple's mail will use by default, because those folders are already their the first time the client connects to your account. However, even though Apple shows your special sent folder at the top of the list, with a paper-airplane icon, and labels it "Sent", in fact they ignore the existing "Sent" folder and make and use their own "Sent Messages."
SO, if you send some mail from webmail, it will be in your actual "Sent" folder, whereas if you send it from an Apple mail program, it will be put into your "Sent Messages" folder. If you look into either "Sent" special folder, you'll only find part of your previously sent mail.
Similarly for Trash, though most users find it more problematic to have two different Sent collections than to have multiple trash buckets.
To unify things, you can either set your non-Apple mail programs to use "Sent Messages" and "Deleted Items"; OR, you can set all of your Apple devices to use "Sent" and "Trash". Doesn't really matter which way you go, though if a majority of your devices are doing it a particular way, you should change the non-matching devices to agree with the majority.
(All clear so far? Why did Apple make this so hard? It would have been utterly simple for them to check for an existing "Sent" folder, and to use one if there is one, rather than to always stubbornly create and use a new "Sent Messages" folder. Then, they add to the problem by pretending that their new "Sent Messages" folder is really just named "Sent". Stupidity all the way down.)
Anyways, to find out what the majority of your devices are doing, check them each to see which of the "sent" folders shows up in the "normal" list of folders rather than in the "special" location, that is, what folder name is in the list at the bottom of the folder area, rather than up at the special "Sent" icon, (because the special one will always be labeled "Sent", not matter what the actual folder name is).
For example, say that on all-but-one of your mail setups, you see a "Sent Messages" folder down in the normal list, and on the other device, you see "Sent" down in the normal list.
In that case, you'd want to set the "different" device to make the folder named "Sent" be the special one, instead of the "Sent Messages" that it was currently using.
Conversely, if all but one showed "Sent" down in the regular folder area, and only one showed "Sent Messages", then you'd want to make "Sent Messages" the special folder on the odd device.
Once you have decided, see the specific sections below for the procedure to set the "special" folders for Apple's Mail.app on a Mac, Apple's Mail on an iPhone/Pad/Pod, or for RoundCube webmail, or for Thunderbird.
Once you have every device using the same sent folder, then you can move any messages from the "extra" version of the folder into your special folder, and then you can delete the extra folder. (If you delete this extra folder and it later re-appears, then it means one of your mail programs is still using it as its "special" folder, and recreating it.)
Similarly for Trash, though probably you could delete the extra trash folder without moving the files, because they are trash.
Here are the details for changing the Special Mail Folders on the systems we use:
A) iPhone, iPad, iPod:
As a first step, use Settings > Mail to set your device to read your email account, then open the Mail program so that it will read the list of all of your folders from the mail server. After that, go back to Settings > Mail to make sure it is using the desired special mailboxes on the server.
Select your IMAP account in the settings tool, and then press the button for "Advanced" settings, and find the list of special mailboxes, e.g. Sent, Trash, Drafts. For each, scroll through the list of folders on the server to choose the folder you wish to use for that function.
Note: iPhones/Pads/Pods also can be set to keep sent mail locally on the device. This is a spectacularly stupid choice for normal IMAP, as none of your other devices will be able to see the messages you send from your phone.
B) Mail.app on Mac desktops and laptops:
Set up mail so that it reads your messages and folders from the mail server.
Select the "Sent" folder that you wish to use in the list of folders at the lower left of the mail window. (On newer Macs, the folders may be hidden by default. Use the "View > Show Folder List" menu command to display them if necessary.)
Use the menu command "Mailbox > Use This Mailbox For > Sent" to specify that the selected mail box is the special folder for sent mail, and similarly for your Trash, Junk, or Drafts folders.
C) RoundCube Webmail (with the standard skin):
Login to your webmail site , and select the "Settings" icon in the upper right of the window, which has a "Gear" icon. This will display a "Settings" panel with buttons for "Preferences", "Folders", and "Identities" settings. When you first open the Settings panel, the "Section" panel shows a row of buttons for different Preferences.
Click "Special Folders" in the "Section" list to open a list of "Drafts", "Sent", "Junk", and "Trash". Each special folder is followed by a menu of all your server folders. Select the server folder to use for each special folder.
D): Thunderbird:
After you have set up your connection to your IMAP account, click "Get Mail" to fetch your existing mail and list of folders on the server.
Next, select the menu command "Options > Account Settings…" (Note that on current versions of Thunderbird, the default menu drops down from an icon of three horizontal bars, in the upper right corner of the mail window. You can use the Options command in this menu to display a menu bar at the top of the Thunderbird window if you wish. With the full menu, the menu command to access the special folders settings is "Tools > Account Settings…"
Select "Copies and Folders" in the list at the left of the Account Settings window. This panel has a section for Sent mail, Archives, Drafts, and Templates. Select "Junk Settings" in the list at left to specify the location of the Junk special folder.
For each special folder, the default choice is the the folder on the server with the "typical" name, e.g. "Sent" for sent, and "Trash" for trash. To use a different name, select the "Other:" option for the folder, and then choose the desired folder from the list of folders on the server.
Oof! That's a lot of explaining for a issue that Apple should have gotten right in the first place, or at least should have fixed in their next several tries. It would not break any existing functionality if they merely used whatever folder the server had created, and only made their own if there was none.

Is there a way to have two separate projects open in different windows?

On my old editing software, I could have two separate projects open at the same time. I could copy clips from Project A, click over to Project B, and paste the Project A clips to Project B. Is there a way to have two separate projects open with Premiere Elements, or will I have to just import and trim every clip within the same project?

Welcome to the forum.
Unfortunately, PrE will not allow two Projects to be open at the same time. It will also not allow multiple instances of PrE to be open.
The workaround, to accomplish what you describe, is to use a ClipBoard Extender, such as ClipMate, which will allow one to Copy a Timeline, or parts of it, from one Project, then Close that one, to Open another one, and Paste the material, that was Copied. Many users employee ClipMate, or similar, to Copy/Paste material from one Project, to another.
Good luck,
Hunt

I have ios 5.1.1. When I sync to iTunes, my purchased apps no longer work. They blink but do not open. The only way I have been able to solve this, is as follows: I delete one of the apps and then re-download and install it. Then, all my apps work.

My new iPod touch 64 Gig has a problem after syncing with iTunes. My purchased apps no longer work. I touch them and they seem to try to open but they do not.
The only way I have found to fix this is as follows:
I delete one of the purchased apps. Then I go to the App Store and re-download and install the same app. After that, all my apps work again.
Please help.

Download/install an app is a know possible solution.
3. Install another app from the App Store
If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
Above from Apple's :
iOS: Troubleshooting applications purchased from the App Store

Is there is a way to have a link from purchase order to cost center report.

Is there is a way to have a link from purchase order to cost center report.
I am meaning kind of:
Standard way to customized this link?
or
User exit to have this link in place
or
Any other solution
Thanks

For me it does not make any sense from going from PO to cost center report.
However, if you want to see the purchase order cost incurred with a cost center, execute KSB1 report. Within the layout, bring "Purchasing Document" field, where you can see the purchase order number in cost center line item report.

Any way to have file size included in the first search in finder?

Is it possible to somehow show file sizes when doing a search in finder?
On Panther, it was very helpful to have the file sizes listed. This immediately revealed whether the photoshop files I was looking for were full size or reduced.
But when I run a search in Snow Leopard it only shows name, kind and last opened. Otherwise I have to also add a second search to add in file size.
Any way to have file size included in the first search?
Thanks!

Well, I wish I could take credit for knowing it was there before two days ago... but I dropped my laptop a couple months ago and it finally died for good on Friday, and I noticed this on the new laptop when setting up my Finder preferences.

Please help!! I have iPhone 4 so does my wife, we each have our own apple id's for these devices. We have just got an ipad to share for at home use. Is there a way to have both our id's on the ipad to share our music photos etc?

Please help!! I have iPhone 4 so does my wife, we each have our own apple id's for these devices. We have just got an ipad to share for at home use. Is there a way to have both our id's on the ipad to share our music photos etc?

For the purposes of 'refreshing' your question so that others more expert can comment here is a link you should read-
http://apple.stackexchange.com/questions/27070/how-many-apple-ids-should-one-hou sehold-have

Is there a way to have two payment cards under one apple id

Is there a way to have two payment cards under one apple id?

You're confusing icloud and itunes store accounts. Individual users should have their own icloud accounts (using their Apple ID) but multiple users can share the same ID for logging into the itunes store account.

2 iPhones 1 computer – Is there any way to have separate contact list

My wife and I recently purchased 2 iPhones (One for each of us). We are presently sharing an iBook G4. Is there any way to have separate contact list and separate calendars on the computer? We both use our phones for our individual work, and have different contact. I am trying to move us from pc to mac. I have a newer pc (compared to the G4) that I can hook the phones up too, but as I said I am trying to move away from PC's. We purchased the G4 used from a friend to get started and learn mac. Sorry for the long explanation I just wanted you to know that I am new to mac.

Just set-up 2 user accounts on the computer, then you effectively have 2 computers in one. All your phone data, and everything else (internet bookmarks, desktop preferences, application preferences) etc. are completely separate.
You and your wife can then use the computer in exactly the way you both prefer without affecting the other.
You didn't say what version of Mac OS X you are using, so here are the instructions for:
10.4.x: http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh168.html
10.5.x: http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
You can then use *Fast User Switching* to switch between the accounts:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1787.html

Is there a way to have longer battery life on a 4s iPhone? Brand new iPhone 4s out of the box I have to charge twice a day.

Is there a way to have longer battery life on a 4s iPhone? Brand new iPhone 4s out of the box I have to charge twice a day.

Absolutely. Search this forum or look in the "More Like This" box to your right.

No way to have 360 sequences inclined ?

Similar Messages

Maybe you are looking for