No work center data on 01.01.2013

Dear Time Experts,
During Time eval for one employee I got an error "No work center data on $01.01.2013".
The person's DOJ is 28.01.2013
Earlier faced similar issue and resolved by deleting B2 cluster and again running Time Eval fresh from DOJ.  But now same procedure not working.
Refered below link but not able to delete B2 cluster as it shows person already accounted.
Re: getting error in PT60
"No Work Center Data on $01.01.2008"
Cheers,
Nayak

Hi,
I am also facing same error. Your issue resolved ? I deleted the B2 cluster but having same error. Can you please tell me the solution for this problem.
Thanks
Dev

Similar Messages

  • Bapi for change work center data

    HIi All
                    I need BAPI to change work center data for all categories and work center change transactions .....IR02 ,CNR2,CR02.
    Thanks in advance .

    Hai,
    Try the fm CRAP_WORKCENTER_CREATE
    BAPI_BUS2054_CHANGE_MULTI
    CRAP_WORKCENTER_CREATE
    Regards,
    Venkat

  • ALE/iDoc for Work Center data transfer

    Hello, community.
    I am working on several interfaces for the PP and PM modules using iDocs/ALE.
    One of the requirements is that only created and modified data must be distributed from R/3.
    For Work Centers, we are using basic type LOIWCS02 and message type LOIWCS. We are generating iDocs through transaction POIM, which has two transfer modes: Complete (data for all Work Centers etc.) and Change (only new and updated data).
    The Change Transfer Mode assumes you have set both Change Pointers and Change Documents for the objects to be transfered. Otherwise, it'll work just like the Complete Transfer Mode.
    Our PP consultant told me there is no configuration to generate Change Documents for Work Center data modifications.
    Can anybody give me other opinions? I'll resort to Z-table solutions only if I have no other options.

    Hi Danilo,
    Do you know what the process codes are for
    LOIWCS and LOIROU ?
    Appreciate your help.
    Thanks,
    Gopi.

  • Work center data

    Hi Experts,
    How do i see work center data in SRM, like the users belonging to a work center, company code etc.
    The issue is , a work center ID is maintained in one of the approval level in a owrkflow.
    I want to know the users belonging to that work center.
    Kindly assist.
    Thanks,
    Siva.

    i created it from PO01

  • Change log for work center data

    Hi,
    I was looking for the table where the change header document for the work center is stored.I was able to find a transation CR10 which shows the changes and also the database table CDHRD.
    When I am trying to view the changes that were made to the work center I find that the data does not exist in the tables.
      I was curious to know this as for some transaction the data is being logged in their respective change table but not for Work Center changes.
      Can anyone tell me as to why this is happening.
    What I think is that some changes to the configuration are required in order to log the changes in the database.
    Kindly help.
    Regards
    Varun

    Hi Wolfgang,
    Thanks for the information.
    However i have another question.
    The change table will have data only when it is activated in the configuration menu.
    However is there any other way by which we can capture the previous data for the work center e.g. the changed by field. I want that the names of the users who has changed the wrok center currently and the name of the person who previously made changes to it.
    See if you can help me on that.
    Regards
    Varun

  • Work center dates

    hi gurus i am trying to assign a cost center to work center .but we are not able to assign new cost center to work center as the system is not allowing to chnage the cost centre
    infact system does changes the cost center but after saving and again displaying it is showing the old cost center not the new one
    how to fix this?
    Thanks and regards
    mzee

    i am not getting error messages but getting warning message.
    Cost center QSCC2 not set up in controlling area QASC on 08.05.2010
    this is the warning message ,but when i try to change cost center it is taking the new cost center but not updating after i save it.

  • Link between HR data and Work center

    Dear experts,
    We have assigned operators in work center through HRMS. For the purpose of making a report we require the table into which the linking of work center data and the employee is made.
    In the table CRHD a field HROID is found.  This is an object id which links the work center with a table either in HR or in PP which provides the link between organisational unit/ employee. Can anybody tell us the name of the table with details?
    Please help us.
    Thanks
    Jaikishan

    Dear Vittalji,
    Thanks for your prompt response.
    Our requirement is as follows:
    We need to create a report on details of operations done by each operators / workers for a specified period. For this purpose following assignments are done.
    (HR module is not implemented yet.  But we have made attempt to maintain the employee master by customising HR module little bit)
    1.  Employee master created in HR. 
    2.  Went to work center maintainence (CR02).
    3. Selected HRMS button.
    4. Selected Work Center option.
    5. Clicked on HR work center
    6. Given same work center as production work center.
    7. Selected 'person' from ALV list data
    8. Clicked on create relationship button.
    9. Assigned the appropreate persons.
    By doing assume this we made assignment of persons to this work center since the name of persons are getting displayed.
    We have a report to list out the workcenter wise operation confirmations for analying the daily production.
    Now we want to incorporate the operators (persons) name into our report by whom the operation/production was performed.
    For this purpose, while refering the table CRHD, found a field HROID (an object id).  To fetch the details of persons / operators those we assigned to the work center we need the tables for linking this field HROID.
    Our questions are
    1.  Whether the process of assigning   operators above mentioned are correct?
    2. What are the table-links for completing our report. i.e. only for work center to concerned operators (HR).
    3. What does the HR Work Center mean?
    4. What are the difference between HR work center and production work center?
    Your help is requested. Points will be rewarded promptly.
    Thanks and Regards
    Jaikishan

  • Data Migration - Work Center? 4.0B - 4.7

    Hey guys, i'm going to need to need to migrate my work center data in 4.0B to 4.7. ALE doesn't seem like its an option. Does anyone know of a good way to do this without manually creating the data?
    Thanks,
    -Shaunt

    There is a direct input program that we used via LSMW in 46C to load work centers before.  The object is 0260.  Method 0000.  Program name RCRAPDX2.  Program type D - Direct Input.

  • Estimated Start time in notification based on Time defined in Work center

    Hi,
    Following Satish post- I am trying to find solution to the same  problem so i will appreciate any advise.
    When the notification is created ,the estimated start time should be based on priority .This in iteslf is pretty straight & simple. However if the reported time is after work hours or towards the end of work hours or weekends , the estimated start time should be reflected accordingly based on factory calender & work center time schedule.
    In other words the estimated start time should fall within the window of work hours available.
    Example:
    Presume the the working hours for the Organization are 8:00AM to 5:00 PM & a call comes for service at 4:00 PM. Also say , for high priority the defined response time is 5 hours. In such a instance the estimated start date should be set to next day at 11:00 AM.
    Appreciate your help for the configuration that need to be done
    Shirly

    Hi,
          I think ur talking about notification malfunction start time .. currently it just takes the system date and time by default .. and if you need work center timings i believe first u need the eqpt /F.loc to get the work center data in notificaiton ...
    I think u can get these dates can be modified while saving by using user exit  : QQMA0014 QM/PM/SM: Checks before saving a notification or BADI   IF_EX_NOTIF_EVENT_SAVE , but at the same time the eqpt or F.loc have work center details in master record ...or work center needs to be entered manually in notification ..., pls check up ..
    regrds
    pushpa

  • Production performance report against work center.

    Hi PP Gurus,
    There is a requirement to develop a production line (work center) performance report in BI which is comprising of Planned setup time, Actual setup time and their variance against a production plant and work center. Input parameters will be Material, Plant, Work center, Date/Week/Month. The scenario is PP Discrete Manufacturing.
    Could anyone please tell me how to fetch data from different tables and how to interlink them?
    Thanks & Regards,
    Abu Arbab

    Hi Brijesh,
    Thanks for reply
    As I told in my first post that I need tables,fields/infostructure that should contain Planned setup time, Actual setup time. I got some infostructure like S022, S024, S281, S282, but I'm not getting exact link between one of them related to input criteria.
    If anybody worked on such requirement please reply
    Thanks & Regards,
    Abu Arbab

  • Table to find maintainence work center in equipment

    Please let me know  where maintenance work center data for an equipment is stored ...I searched in EQUI/EQUZ ..but could not find ...PP workcennter is there but Maint workcenter is not found in these tables

    Hi,
    EQUZ-GEWRK  is the work center on organization tab
    ILOA-PPSID is the work center on location tab
    In each case the work center is stored in a internal format. To find the actual work center / plant, find the CRHD record where OBJID field contains that internal number.
    -Paul

  • Plant Maintenance -- Work Center Tables

    Hi,
    I want to have a list of PM tables, where Work center data is stored.
    Thnx,
    Shivaa.

    http://www.sap-img.com/plant/transparent-table-relate-with-pm-module.htm
    http://www.erpgenie.com/abap/tables_pm.htm

  • Want to remove Technical data Tab from Work Center

    Hi All,
    I want to remove Technical data Tab from Work Center. I have Removed ''Technical data'' Tab from Plant Maintenance and Customer Service-->Master Data in Plant Maintenance and Customer Service -->Maintenance Plans, Work Centers, Task Lists and PRTs >Work Centers>Configure Screen Sequence for Work Center.
    Still I am able to see Technical Data Tab in IR01, Work center.
    Is there any other config to remove the same?

    This is resolved.
    I have changed the config in following node as 0005 for PM
    SPRO / IMG -> Plant Maintenance and Customer Service -> Master Data in Plant Maintenance and Customer Service -> Maintenance Plans, Work Centers, Task Lists and PRTs -> Work Centers->General Data->Define Work Center Types and Link to Task List Application

  • Request for detailed acts to upload Work center,  BOM, Routing data in LSMW

    Hello PP ANgels,
    Request for detailed actions to upload Work center/Resource,  BOM, Routing/Recipe data in LSMW.
    Thanks in advance

    Sanjay,
    In the forum I found that you had used some "drops", that require a password to view.
    In these forums, the only links I post are public (help.sap.com) and from SAP support (service.sap.com/support).  SAP Support is mostly available only to customers and partners of SAP.  If you meet these criteria, and need a login for the SAP support site, contact the license administrator for your company's SAP licence (this is usually a Basis person).  If you cannot locate this person in your company, contact Service Marketplace directly (service.sap.com/mp).  Alternatively you can contact your local SAP Sales office and speak to your account administrator.
    Maybe it would be a better idea to group all standard solutions in one place.
    I expect it will be so...in Nirvana.  Here, life still entails suffering.
    With respect to your detailed questions, I would have a hard time answering, I have never used recordings in LSMW to create work centers, I always use standard batch/direct input.  I suspect that the VGEXX items are the units of measure from CRHD, I suspect LARXX items are activities from CSSL, and I couldn't comment on FORXX items without doing some research.
    This is the SCM PP forum.  You might get more answers posting this in the ERP PP forum SAP ERP Manufacturing - Production Planning (SAP PP) , since work centers/routings/recipes/BOMs are more or less irrelevant in SCM.
    Sorry I couldn't be of more assistance.
    Best Regards,
    DB49

  • Tables for Basic end date and work center for operation

    Hi!
    I need table name to fetch the basic end date of a maintenance order and maintenance work centers with respect to each operation in maintenance order.
    Regards,
    VM
    Edited by: V M on Jul 20, 2010 7:22 AM
    Edited by: V M on Jul 20, 2010 7:35 AM

    Hi VM,
    Input is Order Number (AUFNR).
    You can find the Basic End date of Order in Table AFKO, filed is GLTRP.
    For work center in Operations, you can use the Table AUFPL from AFKO.
    Pass this AUFPL in AFVC and get the ARBID.
    Then pass this ARBID to CRHD Table as OBJID, and get the work Center (ARBPL)
    Regards,
    MLN Prasad

Maybe you are looking for