Noise reduction in Premiere Pro CS5

Hi,
what is the best way to reduce noise in Premiere Pro CS5 (64bit Windows 7)? I have learned that many people thinks the Neat Video plug-in is the best choice for noise reduction. Is it so or does Premiere CS5 or AE CS5 itself include some special tricks for noise reduction? In the Neat Video's download page
http://www.neatvideo.com/download.html
one can select between Premiere or AE plug-ins. Is it wiser to do noise reduction in Premiere or in After Effects?
Any help and tips are welcomed.

Stahlberg wrote:
Is it wiser to do noise reduction in Premiere or in After Effects?
In my experience, NeatVideo in PPro is the better choice. I get around a 10x improvement in export speed if I use Neat Video in PPro, vs using the Remove Grain effect in AE. And I like the results from Neat Video better.
Now, NV isn't perfect. It's not intuitive. It's difficult to control. I find that looking at what it does to a single frame isn't representative of what the resulting moving video looks like, which makes it hard to judge and decided how much is too much (when in doubt, use less). It seems to be sensitive to other effects in the stack above it too -- if you use the three way color corrector, for example, you should nail that down first before you even set up NV, because tweeking the TWCC after the fact can throw off NV. And if you try to sharpen with NV it tends to increase contrast and extend shadows down and highlights up (not subtle: you see this visually and can verify with a waveform monitor).
I had to buy the pro version just because I'm working with 1080 sources, but I feel like it's a good value for what it does. Saved my bacon on a couple of low light interviews.

Similar Messages

  • Problems with Premiere Pro CS5

    Everyone seems to be getting replies to all questions around here so i hope someone can help me out.
    My premiere pro CS5 has decided to act up for the past three weeks: everytime i open an old project, it loads up, opens the project window and timeline, feels like it's all good, but then the spinning wheel appears and all fans go out of control on my macpro, and this process can go on for hours until my only option is to force quit the program, SADLY...
    It's almost as if it's trying to conform all items in the project panel, but it mentions "all media loaded", and there are no dinamic link files to find.
    There are two projects i'm constantly getting back to: one is a 720P poject which contains two timelines, a 30 min one which only has music now, and a 5min timeline with music, go pro footage and rendered HD animations from AE, all at 720P. Opening this project can take up to 40 min where i'm staring at a spinning wheel and hoping for the fans to not explode, that was not the case three weeks ago; I could close everything, shut down for the night and get back to it the next day.
    Second project is a holiday video of Asia which goes for one hour and fifteen min, but it was all shot in 07 with an old Sony DV on standard def of course. Opening this project used to be smooth, even though i often moved things around and had to find them again. But now i want to rework on its sound, noise reduction anf create a nice DVD for my family, but I cannot open the project without having to wait for HOURS, and HOURS and HOURS - the longest being three hours and the spinning wheel was still going and the fans were louder than a lawn mower....
    This never used to happen before and it is worrying me as I started editing a short film in 1080P, so far i can open it nicely, but it may turn into a mess like the other two projects.
    The two projects used to have dinamic link files as i always had after effects and Encore working along PPRO to avoid rendering. At first, i though ADL was the problem for such a slow bootup, so i got rid of every ADL files and rendered instead, which consequently helped me in the process. BUT NOW, it is impossible to open them without a long and frustrating wait.
    If i start a new project, everything is fine and will reopen smoothly - what are your thoughts on the matter guys??? Can a project be too heavy and requires 4 hours to load?...
    I have a quad core MaPro with 32gb of RAM, so this should render and locate files lightning FAST....
    I already reinstalled the whole suit but the problem still happens, i'm thinking about a complete format and reinstalling eveything from scratch...
    thanks in advance for your suggestions.

    Try these steps. Something is definately wrong with your loading times.
    1. Delete PrP preferences (Option - Shift when booting up PrP)
    2. Clean Media caches (Preferences Menu/Media)
    3. Delete preview files
    You dont mention where and on what system your media files are stored. For best performance a raid array is desirable.
    4. Make new sequence and copy timeline from old to new.Do this if the above stuff doesn't help.
    5. Upgrade to 5.5 where a lot of issues has been resolved.

  • Trial version of Audition CS 5.5 cannot interact with Premiere Pro CS5?

    I have Premiere Pro CS5 and downloaded a trial of Audition CS 5.5. The option "Edit in Audition" in PP CS5 is greyed out, so I cannot test the sound editing interaction between the two PP and Audition.
    What is wrong?
    Is it not possible to use PP CS5 with Audition CS5.5?
    Is it not possible in the trial version of Audition?
    Or am I doing something else wrong...?
    Greatful for your time and help!
    Håkan

    Thanks durin for your kind answer.
    Since there is a menu item called "Edit with Audition" it seems as if there at least has been a connection before? So, can I buy/try an earlier version of Audition to make it work?
    I want to test if Audition can remove some background noise that occur in one of my productions, before I buy. If it is possible to try it out in an earlier version , I guess I will also be prepared to upgrade PP, but I wont buy anything without knowing it can solve the issue.
    Reagrds and thanks again,
    Håkan

  • Premiere Pro CS5.5 mercury playback engine will be supported on GTX 680

    Could someone please confirm if Premiere Pro CS5.5 mercury playback engine will be supported on GTX 680.
    thanks

    Jim,
    Your comment was based upon results from the 560 Ti 448 card and that is € 240 or more. The 680 is € 440. That is 45% difference: € 440 - (0.45x440) = € 440 - € 198 = € 242
    Your comparison is based on a € 200 GTX 560 model, which only achieves a score of around 120 seconds, which is 55% less expensive (€ 440 - (0.55x440) = € 440 - € 242 = € 198) and more than 225% slower (120 / 53 = 2.26)
    So for 55% less expenditure, you lose more than 225% performance. That is very disappointing and would rank in the 'penny-wise-pound-foolish' savings. (But that is how your system can be ranked, at least in the past). There is another major flaw in your reasoning, you are only considering number of CUDA cores, nothing else. You are disregarding all the other aspects of the new architecture and that makes your argument very weak and flawed. You have to consider the number of cores AND the memory bus in combination. Something you obviously overlooked, but although the number of cores tripled in comparison to the 580, the memory bus was reduced to 256 bits width, a 50% reduction. That means that at best the expected performance gain could be 0.5 (memory bus) x 3 (number of cores) = 1.5 and not your 300%.
    To summarize:
    Now if you want to go the other way, with the 680 as the baseline, you'd say that for 60% less money, you still get 80% of the performance.
    For 55% less money, you get 44% of the performance on this test.

  • I had to re-install Premiere Pro CS5 and now video are files acting funny...

    Hello. I had to reformat my system drive and did a fresh install of Windows 7 Home Premium 64-bit and then I did an anytime upgrade to Windows 7 Professional 64-bit. I then re-installed Premiere Pro CS5. Here's the problem. When I open any of my projects that I worked on BEFORE I re-installed Premiere (when I was using Windows 7 Home Premium), the video files on the timeline all look corrupted when I play the timeline now. They have these weird block artifacts and also a constant pulsing thing going on. I deleted all the media cache files and all the media cache database files but, nothing changed even though Premiere conformed every single video file in the project again. Then, I went to "Sequence" and hit "Render Entire Work Area" and after Premiere was finished rendering, I noticed the artifacts and pulsing are completely gone BUT, the video files look like a VHS tape that has been recorded over a few times. The edges of people and things in focus aren't nice and sharp like they were before I re-installed Premiere. I DO NOT have the time or patience to have to delete all the video files and import them again into the project and re-edit the entire scene! Can someone please help me resolve this problem?! I am about done with Premiere!
    Is there a way to delete the video source files that are on the left side of the timeline (next to the "Source" window, where they got imported into the project) without deleting the edited video files on the timeline and then re-import the same source video files into the project, kind of like "refreshing" the video files? If this is possible, it seems like this would fix the problem without me having to re-edit everything again.
    *Update*  My idea of just re-importing the source video clip won't work either. I deleted one of the source video clips, which deleted its reference clip on the timeline, and I re-imported the video source clip to see if it would play all weird in Premiere and sure enough, it has the same exact block artifacts and pulsing effect like all the other source clips in the project. It seems that if that's the case, it might be a codec problem. But, that doesn't make sense because if I open the clip on my hard drive with Windows Media Player or Allplayer, the clips plays perfectly fine and looks like it is supposed to. So, it must be a codec problem in Premiere??? Could it be that Premiere Pro CS5 doesn't work well with Windows 7 Professional? I find that hard to believe. Can someone please help me?
    By the way, all the video clips in the project are from my Panasonic GH1 or my Panasonic GH2. They are all 1080p/24 AVCHD. I even made a new sequence within the same project making sure the sequence settings are AVCHD 1080p 24 and still nothing is fixed.

    Have you tried exporting a 10 second section of the footage to see if the issue shows up once the seqeunce is actually exported from the timeline. I edit on CS5 with windows 7 pro at work quite often and have no issues so I assure you that isn't the issue. I also edit with AVCHD footage when at home and work quite freqeuntly as well so I'm positive that isn't the issue. It sounds like a GPU driver has been corrupted in the way it interacts with premiere pro. What type of GPU do you have? If it supports MPE's GPU acceleration have you tried turning it off and seeing if that makes any difference?
    Anyways though try to export a 10 second test section of your timeline to see if when the clip is exported from premiere it will play normally in windows media player or vlc or w/e media player you want to use. If it exports fine then you can almost be positive it's a corrupted video card driver. If that's the case I'd re-install your GPU's driver and also check your gpu makers website to see if they have a updated driver avaiable.

  • Error Importing Premiere Elements project into Premiere Pro CS5

    Hi,
    I am working on a multi-part video project that I started in Premiere Elements 8.  I put in hours upon hours of editing on the first part and I found that the more I edited, the more often the program would crash (infuriating!).  So I started using Premiere Pro CS5 to produce the second part, resolving to come back to the first part later.  Well, I've come back around to needing this first part done, and it is just undoable in Elements (crashes every 20 seconds!).  I'd like to import that project into CS5 if possible.  The help documentation says this should be perfectly possible... but I'm having no luck.
    When I attempt to open my Premiere Elements project in Premiere Pro, it tells me the project must be converted from Elements .prel to Pro .prproj, and I click through the prompts as normal.  But then as soon as it starts trying to open the project, I get this:
    "The Project could not be loaded. It may be damaged or contain outdated elements."
    I downloaded the Premiere Elements 9 trial to see if it would be less crashy (and it is), but I'd really prefer to have all my video in one program, and CS5 does the best job (and has most of my hours invested).  Elements 9 opens the "damaged" project just fine and I can edit and export normally, so why can't CS5?
    Am I stuck recreating the project from the ground up in CS5?

    In very general terms, a contemporary PrE Project (PREL), will Open in PrPro, with the steps that you outlined.
    Now, there are all sorts of considerations, for aspects that will not likely work:
    Instant Movie/Themes, as PrPro cannot read those
    Some Effects that PrPro does not have, like the NewBlue FX
    Some Transitions that PrPro does not have
    Some Title animation Presets, that PrPro does not have
    Do you have any of the above in your PrE Project? There are probably other circumstances, but those are all that come immediately to my mind.
    The simpler the PrE Project, the greater the likelyhood that it will Convert to a PrPro PRPROJ file.
    PrE 8 and PrPro CS5 should be close enough to work, again in those general terms. I can Open simple PrE 4.0 Projects in PrPro 2.0, but cannot Open PrE 7, 8 or 9 Projects in PrPro 2.0.
    Good luck,
    Hunt

  • Premiere Elements project imported into Premiere Pro CS5.5 becomes unusable after first save

    I have Premiere Pro CS5.5, and I have been trying for some time to successfuly edit an old project that was originally created in Premiere Elements (not sure which version--probably 7.0). It has the .prel extension. The project imports just fine, and I am able to edit it initially. However, if I save my new Premiere Pro project, close Pr and try to open the new project again, I get the "The project could not be loaded, it may be damaged or contain outdated elements." error message. I have tried many of the various project recovery suggestions people have made in this forum and elsewhere online, but none of them seem to work. I even opened the project in XML Wrench, but there were no errors returned when I clicked "check is well formed." Once I close the project after doing some initial editing, it is gone. Is this a known issue? Is there any way I can be able to edit the old project in Pr and save my work? Thanks!

    Have you tried using the project manager to re-copy all elements and timeline etc into a totally new directory. I'm just curious to see if that would make a difference. I'd be intrested to see if when making a new project in this manor if it would because as you have stated the normal save methods haven't.

  • Premiere Pro CS5 Playback and Performance Issues

    I upgraded (2) separate editing work stations to CS5 from CS4 about a month ago. I moved from 4 to 5 to try and get rid of some problems which both work stations were encountering.
    The problems since the upgrade are similiar: playback from timeline has intermittent audio drop out and video going to black during playback, (new one)-video locked up but audio kept playing-system hung and had to be rebooted.
    Also, when clicking around on the timeline or scrubbing the timeline, Premiere crashes.
    This type of performance on playout or timeline usage is consistent on both machines which have indentical setups and builds. None of this happens all the time but happens enough to causes problems with workflow. We edit on the work stations, dub files to playback system for air, and use a shared server to move files back and forth as needed but files are always stored locally instead of using straight from server.
    These machines are:
    Premiere Pro CS5.02
    OS  WIndows 7 Pro 64 bit
    12 GB Ram, DDR3-1333 (6-2GB modules)
    CPU Intel Xeon Quad Core [email protected] GHZ, 2 processors, 8 MB Cache
    500 GB SATA 2 hard drive, 7200 RPM, 32 MC (System Drive)...309 GB of space avail
    (3) 1 TB SATA 2 hard drives, 7200RPM, 32 MC (3 TB, RAID0 STorage) 2.16 TB of space avail
    Nvidia GE Force 9800 GT Graphics card, DUAL DVI, 1 GB
    REaltek High Def Audio, Drivers 6.0.1.5953
    (1) monitor in use
    output of system runs to ADVC-700 breakout box to feed playback system
    I have all of my software installed on C: (309 GB of 500 GB avail)
    I have all of my videos files stored on D: (Raid Storage with 2.16 TB of 3 TB avail)
    The only changes I've made since installing CS5 would be to change the auto save from 20 minutes to 60 minutes. Don't know if an auto save would cause an issue on playback as I've noted above.
    I'm not a computer whiz by any stretch of the imagination but I can follow directions if given for testing/eval.

    Do the PPBM5 Benchmark and send the results to me by PM, in addition to sending the results to Bill as indicated. I'll have a look at what might be going on here.

  • Premiere Pro CS5.0.4 -Will not play any video- reinstall didn't help

    here's my system info -
    Model: MacPro5,1, BootROM MP51.007F.B03, 4 processors, Quad-Core Intel Xeon, 3.2 GHz, 16 GB, SMC 1.39f11
    Graphics: ATI Radeon HD 5870, ATI Radeon HD 5870, PCIe, 1024 MB
       ----------------I only use one monitor, 1920x1200, 32bit color depth
       ------------------No Capture Card, No Sound Card or I/O box
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Serial ATA Device: HL-DT-ST DVD-RW GH61N
    Serial ATA Device: TSSTcorp CDDVDW SH-222AL
    Serial ATA Device: Hitachi HDS722020ALA330, 1.82 TB
      ----------  This  2tb Hitachi is my data drive -  there are 600GB free (33%)
    Serial ATA Device: OWC Mercury Extreme Pro SSD, 223.57 GB
       ---------This 250gb SSD drive is my system/application drive - 120GB free (50%)
    Serial ATA Device: OWC Mercury Extreme Pro SSD, 111.79 GB
    ------------this 125GB SSD  I use as a project-specific drive to serve up video very quickly when i'm generating Video material using the software VDMX
    USB Device: Keyboard Hub, 0x05ac  (Apple Inc.), 0x1006, 0xfd300000 / 2
    USB Device: Apple Keyboard, 0x05ac  (Apple Inc.), 0x0220, 0xfd320000 / 3
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x5a100000 / 2
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8215, 0x5a110000 / 3
    FireWire Device: built-in_hub, Up to 800 Mb/sec
      i've been using Premiere Pro for about a year and a half with no trouble, no crashes that i can remember.   I updated to 5.0.4 when it came out and experienced no problems.
    I have not made any changes to my system (drivers, programs, etc.) since the last time i worked with Premiere Pro with no trouble.  The only  difference is that i generated approx. 52GB of new video files (mov. uncompressed 32bit 640x480 resolution) that i was beginning to edit in to a music video.
    My current problem is:: there is absolutely no playback of video in 5.0.4.   not in the tiny project window preview,  not in the source preview, and not in the timeline/canvas window.   when i push PLAY, the button turns into a square STOP button, but nothing happens.   this is independent of project or file type.  The project i was working on when playback stopped is using uncompressed 640x480 32bit Quicktime files and one 44khz/16bit .AIFF file.   as a quick doublecheck, I just added a 640x480 Apple Intermediate Codec file and it also will not play back.   I opened older projects and none of them will playback.
    My problem started while i was working on a project.  I was working on the project for probably an hour and a half with no trouble.  Then it seemed to get a bit sluggish and i could hear the HD churning a little more.   After rendering out a short section (just under 10 seconds), PPro did not play back the just rendered (now greenline) section.  Immediate playback of rendered material was the default behavior, and this was the first time ever that the just rendered section did not play back.   I then discovered that no video would play back at all--in any of the windows.   I can scrub through all the video without any trouble--all the frames are there.  
    I shut down PPro, & restarted.  No change.   I restarted my computer.  No change. 
    Realizing that the problem was likely related to a lack of space on my data drive,  i deleted approx. 500GB of files off my 2 TB drive, leaving just under a 1/3 of it free.  i checked the drive for errors, and defragmented it.  Premiere Pro still wouldn't play any file from any project.
    The files are fine, they will playback anywhere else (several different file types involved in different projects).  The files are compatible with Premiere Pro (uncompressed VGA resolution Quicktime .mov), i was editing on the timeline with them for hours before all video playback stopped.   All other Adobe programs  (After Effects, Photoshop work fine).
    I tried to find an answer/solution on these forums, unsuccessfully.   After uninstalling PPro and reinstall (did not help), and entire Suite uninstall, Adobe Clean, and reinstall,  neither version 5.0.0 or 5.0.4 will play video --the no playback problem has persisted.
    I was running out of HD space --i had less room than i thought -- down to about 7% of free space, a bone-headed move on my part.  I'm not  surprised that playback performance got compromised due to lack of space.   But i'm shocked that the problem is persisting.   Fortunately, i had just backed up my entire system the day before.  (i've backed up many times before and this never affected PPro performance)
    i tried to "CLEAN" the media cache for the sequence but it had no effect  (in searching the forums, i saw somebody else have their 'crashing Premiere Pro' problem solved by hitting this button).  I just took a look in the user/application support/adobe/common/5.0 to look at the "Media Cache" folder and the "Media Cache Files" folder.   Neither of them are empty, even after hitting the CLEAN cache button in the main preferences 'Media' settings window.   I don't know if this is the correct behavior or not.   (i'd expect a "clean" command to empty the folder, but i'm not the programmer)
    This does not appear to be the ATI/5.0 problem that so many Mac users suffered (i was lucky to never have that problem).    Again, i've never had any problems with Premiere Pro over the last year and a half, until working on this latest project with the Hard Drive very low on space.   I'm 99.9% positive that's at the heart of the issue.
    I don't understand why a clean reinstall did not help in this regard.  The problem is clearly PPro specific.   I found one topic in the forum where someone else experienced this same "no video playback" problem, but there was never follow-up from the user saying whether or not his problem was solved (or what was done to correct the problem).
    I'd love to get some help--- seems to be a very rare issue, but right now, i can do no video editing.  btw,  i started a new project as well and imported a .mov file -- same problem, no video playback.
    the weird thing is that i can actually still edit video.  i just rearranged my timeline assets and rendered out a minute-long quicktime (Apple Intermediate Codec) .mov and it looks and plays as it should.    This is really weird.  I'm baffled -- there must be some way to fix this.   I don't want to have to go back to Final Cut,  certainly not when i've already paid for Create Suite 5 Production Premium and EVERYTHING works except for video playback in PrPro.
    thanks in advance for your help
    Message was edited by: magneticjak
    Message was edited by: magneticjak

    hello.   hey, thanks very much for writing back.  i got some good info with a search or two.  (info about what regedit is and what corresponds to it in OS X -- regedit allows you to edit "preference" keys for individual programs,  OSX's equivalent for these keys are the .plists in User & System: Preferences and Application Support)
    what i ended up doing was uninstalling Premiere Pro (not the suite, just PPro).   Then i deleted a few preference files:
    from User /Preferences/Adobe:
    com.adobe.AdobePremierePro.plist
    com.Adobe.Premiere Pro.5.0.plist
    and from System Preferences:
    the file:  Adobe Premiere Pro Prefs
    and..
    /.../Premiere Pro/5.0/...
    AMEPrefs.xml     (i noticed that there's also a preference file in Media Encoder's own folder so i didn't sweat this one)
    Debug Database.txt
    Placeholder Preset.epr
    PostEncodeCmds.pref
    PresetCache.xml
    Trace Database.txt
    NOTE:
    of course i don't know if deleting any files beyond the 2 .plist files in User Prefs was necessary, but...  it seems to have worked.
    I then reinstalled Premiere Pro CS5, and fired up an old project and i've got playback of HD and DV files, and snappy editing and rendering,  so hopefully i'm good to go.   I'm just going to stick with v5.0.0 because i actually don't remember ever having any trouble with it, and i don't remember v5.0.4 adding anything i was 'missing' or 'needed'
    hopefully, this thread will be useful for any future folks that run into trouble - and it's got a solution for both Windows and OS X
    happy editing,
    peace

  • Why does my entire computer freeze while opening or using After Effects or Premiere Pro CS5?

    Just built a computer to meet all requirements for Adobe, Autodesk 3ds Max, and UDK, for school.
    Specs;
    Motherboard - ASRock X79 Extreme 4-M, Socket 2011 - Micro ATX - 4 DDR3 1600/1333/1066/800 - 3 PCI-E 3.0 x 16 - 7.1 CH HD Audio - PCIE GLAN - 3 SATA3 - eSATA3 - 4 SATA2 - 4 USB 3.0 - 10 USB 2.0
    Processor - Intel Core i7 Processor - i7-3820 LGA 2011
    Processor fan - Intel Thermal Solution RTS2011 AC
    RAM - Ballistix by Crucial - 2x  8GB Tactical PC3 - 12800 CL8 1.5 VW/XMP = 16GB RAM
    SSD - Crucial M4 SSD 128GB - Comptatibility with 6Gb/s & backward compatible with SATA 3Gb/s
    HDD - Seagate Barracuda 1TB - 7200 RPM up to 32mb cache
    Power Supply - Cooler Master Extreme Power Plus 700W
    Graphics Card - EVGA - NVIDIA GeForce GTX480 - DirectX11 - CUDA - OpenCL Support - PhysX Technology - OpenGL 4.1 (so says the box it came in; but if I'm not mistaken I think the command prompt had shown OpenGL 3 or 3.2)
    Disc Driver - LG DVD/CD RW... It is an OEM, Windows claims it is updated.
    I use an external component - USB Microsoft Wireless Mouse & Keyboard 2000.
    I have, as far as software goes...
    Windows 7 64-bit SP1
    Adobe Creative Suite 5, student version or what have you.
         - I do have several plugins installed as well for After Effects only.
    Autodesk 3ds Max 2012
         -I have several maxscripts as well as a couple plugins for 3ds Max.
    UDK 2-2012 & 3-2012
    NVIDIA PhysX Lab 1.1
    NVIDIA Texture Tools 2
    NVIDIA plugin for Photoshop
    xNormal
    ConTEXT
    UnCodeX
    Quicktime
    AVG Free
    Malwarebytes
    7-Zip
    Java
    Sculptris
    As for anything else giving me issues I haven't noticed anything besides a previous Graphics Card wasn't supported very well at all with 3ds Max, it would freeze while using the material editor which was fixed with replacing a GTX550 ti with a more compatible GTX480. Thought maybe the upgrade would also solve the fact that almost everytime I go to start up and/or use After Effects or Premiere Pro CS5 my whole system freezes. Whether or not I'm doing anything, it occasionally happened during "Scrubbing" the timeline, but also during the splash load up screen. Would take the time to wait for several minutes but nothing would change. Hard reboot was needed. After countless hours of searching online I stumbled upon what is called an "Unlock" for Premiere Pro/After Effects to allow accelerated GPU and CUDA cores. Simple procedure, seems as if things go faster... When it is working. But still, I encounter freezes on my entire system. It isn't a crash back to Windows or anytihng. Just a complete freeze on the entire system. I have not extensively used other Adobe programs besides Photoshop quite briefly just so I could open menus and force a freeze within 5 minutes and noticed nothing wrong. Which in AE & PP just running through any of the menu windows can quickly cause a sudden freeze.
    note* I have alternated shutting off and turning on OpenGL as well as multiprocessing. Doesn't matter, it really doesn't seem to change much of anything.
    Alas, I am absolutely sure, after checking and re-checking 80+ hours over the past 2 weeks that yes, everything is updated as far as each individual program, software or hardware will allow me to update them. I have reinstalled Windows as well as each program up to 3 times, and 1 system (restore?) I had Windows dump everything, started from scratch, backed up nothing. To reinstall everything from scratch, while not installed several "Utilities" or software components from stuff like the Motherboard and its XFAST USB/LAN or whatever, thinking maybe it was cluttering up anything.
    Please, if anyone has any ideas upon this and could give me advice, whether you notice any other incompatibilities or anything. Any and all advice would be greatly appreciated. Thank you.
    note* I do not have a wired Keyboard or mouse to disable the USB plugin and attempt that route.. at least not yet, its on my list of things to do. Also, I did run Memtest86+ during a boot and it claims that everything there had passed 100%. I am not "overclocking" anything either. I just wanted something I could work smoothly on, that would have decent rendering capabilities. I used to use my girls' laptop which was an HP with 3GB RAM and never experienced crashes or freezes and I could use AE, PPro, 3ds Max with some lag but not any issues. Rendering took forever on it, but I usually avoided that 'cuz it would start heating up pretty fierce. Saved my rendering for school computers where I could. But either way, now I have this expensive piece and it is getting frustrating that I cannot work on it.
    note* Also, incase it does help, I have Windows as well as any major components installed onto the C: drive (aka SSD for my system) while all my secondary software, such as Adobe, Autodesk, etc. are all installed directly to my D: drive (or HDD) And everything is set up to go through Windows Firewall as well.

    Thanks all. I have just tried a few things, installing them onto the C drive as you all specified as not being one of them. I can understand it, but at the same time i have a classmate who has their software on a seperate drive and it runs smoothe. I'm on my second GPU in 2 weeks, unless I have terrible luck it seems doubtful being that I can run games and a majority of the software no problem. Through further testing around with a corded mouse and keyboard I've noticed the following...
    The computer freezes entirely only when I'm performing a "scrubbing" action or using a mouse. Left clicking, scrolling, or moving it around. Otherwise if I do not use the mouse and I make all my actions, such as "scrubbing" in AE via "Page Up & Down" keys, there's no freeze and it preloads the preview no problem.
    "Scrubbing" does not load a preview (the green bar doesn't load at all while scrubbing). But, also noticed no matter how smoothe everything is running in 3ds Max as well as PPro, once I start performing a "scrubbing" action with whatever timeline I use, it will definately freeze my whole computer, Windows and all. Hard reboot is neeed.
    With having gone through 2 GPU's, done a full memtest via Windows 7 and Memtest86+, there seems to be no issue with my memory or GPU. Like I said, I've run UDK without an issue. Whether the editor or game. The USB doesn't seem like it's the cause, I've used both wireless as well as wired keyboards/mouse. Still freezes, but now only when using a mouse to "Scrub".
    Is it possible my motherboard could be incompatible somewhere? I mean, really.. everything is brand new but 2 weeks of troubleshooting.
    And I do plan on trying to run my software off the C drive, I just wanted to make sure it wasn't something else, like I said, I've seen and used a computer where it all runs off the D drive and it runs perfectly, actually better on his computer than off the C drive at my schools. So if it is an issue would it lie within the fact that I'm using an Nvidia GPU? Considering my classmate is using a AMD/ATI Radeon or something like that.
    Again, to those who replied, your shared knowledge is greatly appreciated, thank you.

  • How do I join multiple (short) audio clips into one single long audio clip in Premiere Pro CS5?

    Hello,
    The question is in the title but I'm wondering how I can join multiple (short) audio clips into one single long audio clip in PP CS5.5.  I put all my short clips right next to each other and selected all of them to see what options are available by right clicking and using the toolbar options at the top.  The closest that I got was to nest the sequence, but that's not what I really want.
    I'd like to merge all the short clips into one single (long) audio file to use under the video.
    Thoughts are welcome and  greatly appreciated.
    Thanks,
    -Melvin

    O.K. This is kind of fundamental and you will need to learn up on this fully ...but for now...
    Make sure you have the WAB ( work area bar )covering the length of the audio clips. ( You do not need to select them)
    Go to the File Menu> Export Media
    You will be given all the Export Options.  Choose Wave File
    Select option for Export Work Area.
    Choose where to export the file to ( HD location)
    follow your nose from there....
    http://tv.adobe.com/watch/learn-premiere-pro-cs5/exporting-with-adobe-media-encoder/
    BTW - Why are you taking the audio to Audition anyway? What are you going to do to it.

  • Why does Premiere Pro CS5 eat up space on my C drive when it conforms video files?

    Hey everyone. I have Premiere Pro CS5 with the latest update installed. I am running Windows 7 64-bit on a 120GB Corsair SSD drive. I have set my scratch disk video and audio previews to a different hard drive (F: drive). I have three questions:
    1. Why does Premiere eat up space on my C drive whenever it conforms the video files I import into my project?
    2. Where on my C drive can I find the folder that holds all these conformed video files that are taking up space on my C drive?
    3. How do I prevent Premiere from eating up space on my hard drive when it conforms the video files I import into my project? Is there some way to move whatever folder is eating up space on my hard drive when Premiere conforms the video files and tell Premiere to conform the video files on another hard disk so I don't lose precious space on my C drive?
    Okay, that's four questions but, can some please help me on this? Thanks.
    Okay, that's five questions.

    hello,
    i think you need to relocate you media  cache files to a separate drive other than your c: drive.
    in the hardware forum, Harm has done a wonderful job at advising on HDD setup, i think it mentions relocation
    of swap file, media cache, etc.  all which are defaulted to your c: in your user profile
    after relocating to different physical drives (all without partitions) performance usually increases
    Generic Guideline for Disk Setup  by harm
    hope this helps til someone else answers more
    good luck...
    j

  • Upgrade Premiere Pro CS5.5 on PC to CS6 on MAC? Use both at same time?

    Can I upgrade from my Premiere Pro CS5.5 on my PC Laptop to CS6 on my new MAC machine?  If so, will I still be able to use my CS5.5 on my PC at the same time as using CS6 on my MAC?
    I'd be grateful for your advice and, if this is possible, how to proceed.
    Many thanks,
    Andrew Kent

    The original poster was not on the Creative Cloud subscription.
    What a mess.
    I think what Baber is saying is Adobe considers an "Upgrade" purchase from a prior license as an entirely new separate license. That allows you to run the old version license on a different platform from the new "Upgrade" license.
    So if you need to run both platforms (Windows and Mac) your options are:
    Cloud subscription
    Purchase a whole new second license to be able to run the current version on both platforms (what we did)
    Wait for an point version update and upgrade going to the other platform. That allows you to run on both Windows and Mac, but one version back on one of the platforms but at a greatly reduced price until the next point upgrade.
    Seems pretty convoluted and obtuse. But ..."It is what it is."

  • Where can I find Plugins / Transitions for Premiere Pro CS5 (not Cs 5.5 or 6) ?

    Hello,
    I am searching and searching for transition packs for Premiere Pro CS5, there are lots for 5.5 or 6 but none for 5. At least I could't find them.
    Any ideas anyone?
    Thanks in advance
    Alex

    https://www.adobe.com/products/premiere/extend.displayTab4.html
    Chances are most plug-ins working for the later versions will also work for CS5, but you can check with each company if you're not sure.

  • Creative Wedding Transitions & Effects for Adobe Premiere Pro CS5 or CS5.5

    Hi!
    I am Professional Wedding Video Editor. before that i was using Pinnacle Studio 14 and Canopus Edius Pro but these Sucks, Now i have Intel Core i7 Extreme 64 bit OS and using Windows 7. I just Buye the Adobe Creative Suite 5. and soon i will Upgrade to Adobe CS5.5 . this is the Great Video Editing Software i Ever Seen. But i found some standard Dissolve & wipe Transitions in it.
    My Question is that can i Use 3rd Party Creative Video Effects & Transitions with Adobe Premiere Pro CS5?
    i want to know about thier names. that has Great transitions and smooth Transitions ever.
    Thanks
    Looking forward for Great Response.
    Regards,
    Waseem

    Once, one could use the Hollywood FX Transitions (available from Pinnacle), but I believe that as of about CS4, that is no longer possible, but since Zac did not mention it (also, I think that Pinnacle no longer works with Hollywood FX, and they might be history?), I assume that CS5/CS5.5 does not support them either.
    Pixelan (mentioned above) is a great resource for Transitons, and I recommed them highly.
    I also have ProDAD's Adorage, but do not use those that often.
    My normal Transitions are just Butt-cut, Cross-Dissolve and Dip-to-Black.
    Good luck,
    Hunt

Maybe you are looking for

  • How to specifically sort the data in a database using c#?

    H!, I have a problem in c# that require sorting of names of students in a sql database and i want it to be specific, i used data grid view to view the data of the students as shown below: Students First Name: Ann Antoinette Brenda Judith Lester Santo

  • How to Create Reports Services

    Hi all, <br><br> In Oracle 10 R2 Application Server for Windows 2003, is there a way to create a new Report Server services in the Application Server other than the already existing one? If yes, how? <br><br> Thanks in advance. <br><br> <i>Note:</i>

  • PCSuite doesn't display contactdetails from E65

    Hi friends, E65 brandnew - newest FW ---- PC Suite 7.0.8.2 In my E65 on the phone contacts - for example "Andy" has a number +43676xxxxxxx My Problem in PCsuite: i can't see the number. when i make an export to a csv file, in the file there is the na

  • Cannot download album purchased yesterday

    I purchased an album yesterday, straight to my iPhone. When updating my iTunes on my PC last night, and syncing my phone the album was lost. The album is not on my phone or PC. When I go into purchases it is not in there. However when I search the al

  • Strangeness with payment. two plans.

    strangeness with payment. somehow create two annual plan. write programs that I have one day to the end of the subscription, even though I paid for a month yesterday. you have Russian support? where you can call?