Noisy background noise when using speaker phone during calls

Hi
Phone: sony experia z3
Does anyone have the same issue as me when you use the speaker phone during calls?
There is a lot of background noise.The caller's voice also sounds echoish
When I turn off the speaker and switch back to normal call it noise disappeared, the the caller's voice is clear.

See if speaker voice enhancement is enabled.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Similar Messages

  • Problem of iphone 6 when use speaker phone

    when I receive a phone call, caller can hear me but when I use speaker phone the caller cannot hear me, but I can hear what he said. How can i solve this problem

    Hi ultrasia,
    From the information in your post, it sounds like you might be seeing an issue with your microphone on your iPhone when in speakerphone. Here is an article that will help you troubleshoot this issue with the microphone:
    If your voice is too faint or sounds unclear using iPhone, or iPod touch
    http://support.apple.com/kb/ts5183
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • HT2188 I can hear caller but they can not hear me except when using speaker phone

    I can hear caller but they can not hear me except when using speaker phone

    First of all,  make sure that your iPhone as the most recent iOS available. Check in "Settings>General>Software Update".
    One other problem could be your microphone. Does it work for anything else other than a call?
    Good-Luck!
    kpower28
    Please mark this as "solved my problem" or "helped me"!

  • Excessive background noise when using Wired Headset with iPhone5

    Hello,
    I use my wired headset all the time on my iPhone 5 64gb. Driving working you name it. I get complaints over and over again that my background noise is very often louder than I am. A friend of mine experiences the same issues. So I know its not just me. I have already gone to the Apple Store and had the phone replaced but I still get complaints. I just called Apple and they said they have never heard of the issue. It's my biggest complaint about the iPhone 5 mainly because its how I use it most of the time.
    Anyone else having this problem? If so, lets make sure Apple is aware of it so it can be fixed.

    yes, my iPhone 5, when used with a corded headset, picks up and amplifies background noise to earsplitting levels. Same for the 2 other people I know with iPhone 5s. It makes using a corded headset all but impossible in most situations, unless I am in a quiet environment in which I am not doing anything.

  • When using speaker phone it mutes phone

    when I press speaker phone icon it mutes volume and I can't hear anyone speak.  It seems to do what the mute button is supposed to do.  It just started doing this today.  Its and iphone 4s using latest download.
    thanks

    See if speaker voice enhancement is enabled.
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Loud background noise when using headphones with mic. iPhone 5

    I usually use headphones with a microphone to make phone calls, and they used to work perfectly.  As soon as I got the iPhone5, I have had trouble.  The person I'm talking to can hear every tiny background noise louder than my voice.  In fact, they complain that it sounds like glass breaking or the ocean or loud rain.  Today, someone about 20 feet away pulled up the window blinds and my caller said it hurt her ears. 
    I've tried a couple different sets of headphones and have the same problem.  Has anyone else experienced this?

    Yes I have the same problem. I have tried 3 different sets of headphones and have had my iPhone replaced. The problem persisits. I am a Version customer in central Wisconsin.
    The headphones are unuseable while making a phone call in a atmosphere where there is any background noise.
    I have been on the phone for hours with Apple. Problem persists.

  • Is there a way to remove the blurred background wallpaper effect when using the phone in iPhone 4S' iOS 7?

    Hello.
    A few nights ago, my picky client finally upgraded his iPhone 4S' iOS 6 to iOS 7. He doesn't like the blurred background wallpaper image when using the phone feature (e.g., calling and talking). Is there a way to disable this new visual effect like in iOS 6?  I am pretty sure this is by design by Apple.
    Thank you in advance.

    sberman wrote:
    I'm not completely sure I understand, but ...
    Might Settings > General > Accessibility > Reduce Motion = "On" do what the customer wants?
    I will tell him about that, but I don't think that would be it if that is related to animation.
    We're talking about the wallpaper background that get blurry during the phone screens like http://www.tekrevue.com/wp-content/uploads/2013/09/20130923_ios7emergencycallfla w.jpg (left side) and http://i.i.cbsi.com/cnwk.1d/i/tim2/2013/09/20/ChangingYourTheme.png ... You can see there are background images that got blurred out.

  • I am having problems using my iphone4 during calls. When any part of my facial skin touches the screen, it would either go mute, hold, speaker or whatever part my skin accidentally touches the screen.The other caller then cant hear me

    I am having problems using my iphone4 during calls. The screen does not automatically lock to prevent any part of my skin or face from touching it. When my skin touches the screen it would either go mute, hold, divert to speaker phone or calls another in my contact list. The person i'm talking to then cannot hear me suddenly when in mute or hold. Is there any application for my iphone4 like a "screen lock" when it is being used on calls?

        Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

    Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

    Not having the problem, don't personally know anyone who is.

  • Any idea why I can only hear a caller when I'm using speaker phone?

    Does anyone know why I can only hear a caller when I am using speaker phone? 

    Hi goodferg,
    The troubleshooting steps below may help you with the sound issue you are having with your iPhone 4:
    iPhone: Can't hear through the receiver or speakers
    Resolution
    Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    Make sure the Ring/Silent switch is not switched to silent.
    While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
    Restart the iPhone.
    If restarting the iPhone doesn't resolve the issue, try restoring the device.
    If the issue persists, go to the Service Answer Center - iPhone for information on service.
    Hope this helps!
    - Judy

  • I have a Bose Soundlink. Can I use the speaker on the Soundlink as an extension of my i-phone during calls?

    I have a Bose Soundlink. Can I use the speaker on the Soundlink as an extension of my i-phone during calls?

    just tried it on mine but no doesn't appear to
    odd logically I thought it might

  • Phone receiver only works when using speaker. I can only receive/answer callls using the speaker.

    After dropping my phone, the iPhone 5 receiver only works when using speaker. I can only receive/answer callls using the speaker.  What to do?

    Hi jlk166,
    I understand that you are experiencing some issues with your receiver speaker. Here is an article that can help you troubleshoot this issue:
    If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone
    http://support.apple.com/kb/ts5196
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • When using the phone, I cannot hear except through the speaker phone.  Phone is iPhone 4 under warranty.  Will a reset or restore fix this or do I need to go to Apple store

    When using the phone, I must use the speakerphone in order to hear.  Does this require a visit to the Apple store or will a reset or restore possibly fix?

    Try this before calling Apple or going to the store.
    Open iTunes, and restore the device as NEW.  Then test making some calls, if it works, GREAT if not then call AppleCare or an Apple store for an appointment.
    Based on experience a restore fixes this issue 99.9% of the time.  The .1% is hardware issue based the rest is software based issue

  • Cant hear or record my voice when on headset mode in calld but can use speaker phone

    I just got a BlackBerry Z10. When I make calls or am called people can't hear my voice in normal headset mode but if I put them on speaker they can hear me. I tried seeing if I could record my voice and it's not picking up anything. Why in normal mode isn't it picking up anything? Is there a setting messed up or did I buy a defective phone? Why does the microphone pick up when in speaker phone mode but not normal headset mode?

    You should run some tests to see what's happening. If you still have the Help icon on your homescreen, click it then click Testing at the bottom to run the tests. If you no longer have the Help icon, go to BlackBerry World and search for BBVE.
    Keep us up to date on your progress.  
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Getting rid of background noise when recording cassettes

    How do I get rid of the hissing background noise when I transfer cassettes into GB?

    portercm wrote:
    Thanks - this is totally new to me. What sort of software do I need to clean up the noise after the fact? I'm dealing with old cassettes and a cassette player with no dolby option.
    there's a bunch of applications that will clean up or "restore" noisy audio, and they range a lot in price and features. Here's a few options:
    Bias makes Soundsoap 2 (around $100) and Soundsoap Pro (around $550). Bias makes some great audio software, so Soundsoap 2 might be more than adequate.
    http://www.bias-inc.com/products/soundSoap2/
    If you think you might want to use Roxio's Toast 10 Titanium Pro (around $115), it comes with a version of Soundsoap included. As long as you don't need the features of a dedicated noise removal application, it's a pretty good deal:
    http://www.roxio.com/enu/products/toast/pro/overview.html
    To get a sense of what's out there, here's a selection of noise reduction apps from Sweetwater's site:
    http://www.sweetwater.com/c713--Plug-Ins_NoiseReduction

Maybe you are looking for