Nokia 1208 security code

While i was using my Nokia 1208 last night, it spontaneously turned off. When i turned it back on and typed in my PIN, it requested a security code. The default 12345 wouldn t work and i have never changed the code. This is the 2nd time this has happened to me and the first time it was just impossible to fix it so i bought a new 1. Can some please help or post of you have had a similar problem! 

if the default code is not 12345 the operator must have changed it try calling them
try removing battery for ten minutes 1st then repeat the proccess if that fails call operator
or try the following
1. Get the phone reflashed.
2. On some phones the reset function will also reset the code to 12345.
You could try the second option but no guarantees it will work on your phone. Also, you may lose all your data if you reset the phone so remember to back it up before resetting.
Always remember to backup your phone before performing resets as your data may be lost.
First try these
*#7780# - Restore factory settings - resets all the settings to the default
*#7370# - Reformat your phone
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

  • Nokia 5110 Security code

    Hi, How do I reset the security code of a nokia 5110? I have to add that I don't know the code. Please help, Thanks

    The Nokia default security code is 12345. If you have changed it at any point you will have to take your phone into a Nokia Authorized Service point and have them reset it for you

  • Nokia Belle upgrade on Nokia X7 - Security Code er...

    I have just upgraded to Belle software but now there is an annoying thing were I keep getting asked for a security code (which I hadn't used previously) on boot up, if you put the default code in it fails(12345,00000), but if you cancel you can still operate the phone normally.
    Very odd...Anyone have any fixes for this?
    thanx in advance!

    skyee wrote:
    Hi all,
    here's our official Q&A on this.
    Q: After the update to Nokia Belle, my phone asks me to enter new security code. I do this and get an error message stating “code error”. What should I do?
    A: Please try again a few times. There are very rare cases in which the phone incorrectly asks for new a security code but does not accept the entered code.  In that situation the problem vanishes by entering any code until the phone stops asking for it.  After this, the code you had entered before the update works again normally.
    Br,
    yvonne
    my E7-00 is asking for a security code in start up, not for a new security code , can i treat it the same ? knowing that i was using a different code than the default before the update.
    please advice.
    Haikal

  • Nokia 5130 Security Code

    Helloo,,,a have buy nokia 5130 xpressmusic,,,but when i want to set pasword on keyboard,,a dont know the master/security codee,,a try most them,,the default 12345,,but doesn't work,,i try with unlock master code,,but still doesn't work,,, does everybody have idea how i can find or change the security codee,,pleaseee i neeeddd helpp

    If you bought the phone new and the default 12345 does not work, then the security code should be in the papers you received with the phone or maybe printed on the box.
    If you bought it second hand then the previous owner should be able to help you.
    Otherwise you'll have to take the phone to your nearest Nokia Care Point with proof that you are its owner (invoice in your name with the phone's IMEI number, and photo ID) and they'll be able to reset the security code for you. Do a backup before having this done because it might entail a full reset of the phone, which will erase all your data.
    Alternatively, you could attempt a firmware update with Nokia Software Updater. A firmware update often resets the security code back to the factory default (but not on all models).
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Nokia 6230i security code

    i have a nokia 6230i. 1 month old bought on 02 pay as you go. but have been using my contract 02 sim in it. now i have decided to use the pay as you go sim because bills are to high. put the pay and go sim in the phone and its coming up security code. iv tried the default number 12345 but it wont unlock. the security code has not been changed.
    it works with any other sim card in it apart from the one it came wiv. can you help?

    You have to wait 15 minutes if you have tried three times before you entered 12345. It locks.
    Thanks, dan.

  • Nokia 7373 - Security Code Forgotten

    Hi,
    I can't perform a master reset on my phone or delete contacts from the phone as I seem to have forgotten my security code (although I do still know my PIN so can access and use the phone). So far I have tried the following codes:
    0000
    1111
    12345
    and the one that was generated by my IMEI number from another website
    ...but each time I get a "Code Error" message. I phoned Orange and they told me that you can't change the Security Code yourself and that it must be 1111 or 12345 but obviously these don't work and Orange are wrong. Any help would be much appreciated as I want to give the phone to my sister as I've recently had an upgrade.
    Thanks. Jeannie

    The default security code is 12345. If that does not work then someone has changed it.
    The ONLY way to reset this code is at a nokia care point. They may charge for the service and you may lose all data from the phones memory.
    They will also need to see proof of purchase/ownership before they will do it.
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.
    Message Edited by psychomania on 27-Oct-2008 03:22 PM

  • Nokia 9300i security code locked

    Hi.Does anybody know what to do if I forgot the security code number and the system is locked on Nokia 9300i ?The phone is usless.I tried the master code but it does not work at this problem.
    thanks 

    If google or searching this forum offers no solutions then your only option at this stage is to take the phone to a nokia care point along with proof of ownership.
    http://europe.nokia.com/support/repair-and-recycle/repair/care-points
    If you cannot provide proof of ownership, (such as a purchase receipt or original box) then it's entirely at the care points discretion as to whether they will help you.

  • Nokia 500 Security code error

    Yesterday I switched on my Nokia 500 with pin code and security code with out any trouble,but after few minutes  it restarted and security code is not accepted, ,I can answer the incoming calls, but i cant connect it to nokia suit help me with this ,

    The default is 12345 have your tried that?
    If you cant fix this it will have to sent to a nokia care point.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Nokia 2760 security code forgotten

    Hello I put a security code on my Nokia 2760 and I have not used it some time  (4 months) because I do not have money to put credit on my SIM card .
    And now I am trying to use the phone and I can not use it,  it ask me for security code and I do not know it anymore.
    What I should do please help me?Thanks in advance for your answers. And sorry my mistakes in writing.
    I do not have an USB cable I did not received one when I bought my phone.
    Solved!
    Go to Solution.

    Hi emanuelleu,
    Thanks for your post and welcome to the Nokia forum.
    We are really sorry for this inconvenience.
    In order to fix this issue, I would advise you to visit your local nokia care point.  Your phone will be reseted to the default code "12345".
    Hope this helps and feel free to post any other questions you may have.
    Regards,
    Pfrancoise
    If this post has helped you to solve this issue, please press the "accept as solution" icon. Kudos would always be appreciated.

  • Nokia 500 security code

    when i switch on my nokia 500, it always ask the security code. so, please give me steps to off this setting.i want that mobile should not ask the code while switching on.

    Please take following steps & you will get solution
    1# go to menu> tools > settings > general > security > phone & SIM card
    2 # now set ''PIN code request'' as ''off''
    3# set '' phone auto lock period '' as ''none''
    4 # set '' allow remote lock'' as ''no''
    # If this is helpful, please click on ''accept as solution'' & add ''kudos'' i.e. Blue Star.
    Thanks for reading Happy to help.
    Using Nokia E63-1 (308.07)
    510.21.010 (28-03-2011)
    RM-437 [S60v3 FP1]

  • Nokia C3 Security Code

    I locked my self out of my Nokia C3, I was entering a new Security Code and I miss pressed a button and don't know what my password is. I've been trying for 3 days straight.
    I contacted my Provider and they couldn't doing anything for it, because I couldn't retrieve the PUK Number. 
    So if anyone knows how I can fix this please help!
    Also what information do I need to help Nokia fix my problem faster?
    Thanks,
    Ahmed

    The ONLY solution is to visit Nokia Care and get it Reset.. In absence of back-up.. you tend to lose your important data...

  • Nokia 1110 SECURITY CODE NO.

    Hi,
    I have a problem with my Nokia 1110.
    I can not recall my private security code No.
    Is there any way to find it or reset the phone?
    Your answer may help me so much.
    Thanks,

    The only way to reset that is to flash some new software on it.
    If you are still stuck take it to your local Nokia Service Centre and they can reset it for you.
    www.nokia.co.uk/repair
    Nokia N95
    V 20.0.015
    0546553

  • Nokia C6 security code

    hey well i got a nokia C6-00 and i put a security code that i forgot
    PLZ HELP!!
    Solved!
    Go to Solution.

    hey well some people tell me that i can fix it by software update (but it doesnt work without lock code) and other people tell me i can hit simultaneously keys on the keyboard that will format it
    Please helpp if u know a way that can help me through these two suggestions and thanx

  • Nokia 3500C Security Code

    Hi,
    I have Nokia 3500 Classice but I forgot the security password, I am trying 12345 but it is not working, can someone help me in this regards.
    Thanks
    Solved!
    Go to Solution.

    You have two options:
    1. Try to recollect the security code that you've set. Or, somehow find out what the code is, in case someone else has changed it
    2. Backup your phone memory  using PC Suite and take the phone to a Nokia Care Center with your proof of purchase, so that they will reflash your phone.
    Edit: The backup will work only if your phone is powered on and working. Otherwise, you'll lose your data. Sorry to say that
    Good luck
    Message Edited by deepestblue on 08-Sep-2009 05:50 PM
    Cheers,
    DeepestBlue
    5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
    If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

  • Nokia 3600 security code

    I have a nokia 3600 slide and I forgot my security code so I can't use it now :/
    I hope that some1 here can help me to solve my problem.

    the default code is 12345 if you changed this you will have to send it to a nokia care centre
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

Maybe you are looking for

  • Can't use the "send by e-mail" button on forms created in Acrobat Pro 9 with Firefox

    I created a form in Acrobat Pro 9.5.2 with a "send by e-mail" button as usual (not using LiveCycle Designer). Since a few months, users cannot send forms using that button USING FIREFOX works fine in Explorer. I've been creating and using those forms

  • New Nano, Old Computer

    So wife just bought a ipod nano but itunes won't recognize it, even though the computer itself does see it. Any workarounds to make itunes 9 see it and work with it? Can I reformat the nano into something that my OS (10.4.11) recognizes?

  • Using f4 help for table field in module-pool

    Hi All, I am using a table-control in module pool programing. Fields are coming from MAKT table. I am trrying to provide a functinality so that when choose a material no using f4 help for MAKT-MATNR field the corresponding value of MAKT-MAKTX should

  • Creating adf-Faces portlets without using IFrame

    Is there a way we can create portlets with adf-faces that will display inline instead of IFrame? I have been experimenting with portlets creation and the only time the portlet will be rendered inline is when you choose the "generate JSP" at step 3 of

  • Firefox 25 downloads aspx files instead of serving up sites thru Google search

    I used android 4.1.2 and just installed Firefox. when I attempt to connect to a website through a Google search link it downloads an aspx file which will not open. entering an address in the window works fine.