Nokia 6220c power button not responding

Hi,
I have a Nokia 6220c that i have used for abuot 6 months, since then i have upgraded to a newer n82. However having a look back at the 6220c before giving it to my brother, i realised that the power button does not respond. 
I know there has been a history with this phone and a stiff power button, so i removed the silver outlining and attempting to press the button with my fingernail and still no success. 
The phone charges fine and the screen goes on when the charger is plugged and when any button is pressed (except the power button), however it's just the plainwhite screen with the battery in the top right. 
Anyways is there any way i can get the phone on or any other methods i should try, has this happened to anyone or is there a way i could change firmware to maybe the red button? If theres no solution I will have to send this back to Nokia which will be a massive hassle. 
Any help will be appreciated. Thanks

Not sure but try this before going to Nokia Care.
.After taking a backup of all you images & videos (i'm assuming you've turned the sync on with skydrive for settings & other data) & keeping a list of all your apps, Reset he phone. If this does not work then only solution will be Nokia Care Centre.
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

Similar Messages

  • Power button not responding, can't login

    I have a late model 15" macbook pro with Retina display.
    Periodically the computer will lock up when I open the cover. It is displaying the login screen and will allow me to type in my password but then nothing happens.
    The main issue however is that I cannot reboot the computer. The power button (built into the keyboard) does not respond. I have pressed and held it for up to a minute with no response. Likewise, no other keystroke combination that I've tried works either.
    I have remote login enabled and I can ping the computer and even start an SSH session, but the computer never responds.
    My only alternative has been to take this to my Apple tech who then unscrews the back (**** pentalobe screws) and pulls the battery cable. This is the second time this computer has locked up on the login screen in 2 days.
    Any help is appreciated. Ask any questions, I will try and answer in an effort to resolve this.
    Dan

    Update:
    My phone did work fine with everything as far as I could tell for about an hour.  Now it turned itself off with over 90% battery and the power button won't turn it back on.
    Holding Home and Power button just made it turn back on.

  • My ipods power button not responding when pushed

    my ipods power button and volume buttons are not responding when pushed

    Try the following to rule out a software problem:
    - Restore the iPOd from backup via iTunes
    - Restore the iPod to factory defaults/new iPod.
    If you still have the problem then it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Macbook Pro 13'' Early 2011 Power Button not responding properly after spilled drink.

    Hi Everyone
    I've spilled beer on my old macbook last december. I've reassembled pretty much the whole mac, cleaned the motherboard with Servisol (isopropyl alcohol) and applied new thermal compound. The mac is working (if turned on from the motherboard, however the power button doesn't work properly. If pressed several times, sometimes it either changes the brightness of the screen or takes you to the widgets.
    The keyboard was disassembled and cleaned and everything else apart from left shift and power button appears to be working on the keyboard. The keyboard was disassembled soon after the spillage, which was few months ago.
    As it was few months ago when I cleaned the keyboard, I''ve forgot whether the power button is a part of the keyboard or an individual module. Could anyone give me some advice on that? Any other suggestions regards to the power button?
    Another problem I've encountered recently is lost administrator account (after an attempt to turn the mac on). I can only access the guest account, my main account doesn't even appear on the launch. I can still see the administrator's files, but can't access them as they're locked. Is there a way to get back the account or access the files from the computer?
    Many Thanks. Damian

    Hi M,
    There are other threads here with similar issues. I do not know if a "common" fix has been found. Try an SMC Reset:
    http://support.apple.com/kb/HT3964
    If no luck there, your Mac has a one year hardware warranty and I would contact AppleCare.

  • Satellite S50T-A - power button not responding

    Hi,
    I'm running Windows 8.1. After most recent Windows update and then restart, the computer froze at Toshiba splash screen. Fan went into overdrive and so I pushed power button.
    Now, appears dead - no response from power button, black screen, no HDD sound. Only signs of life are power and battery leds on front of computer. Pushing and holding power button for more than 10 secs does nothing.
    Any ideas?

    Hi
    The force shutdown switch (hole) is available at the bottom of the notebook.
    In case of PC is freezing, not booting or has a power failure, which cannot be fixed by pressing and holding the power button for 10 seconds (force shutdown), please use the force shutdown switch
    I found this info in this Toshiba FAQ document
    [Force shutdown switch (hole) for models with a fixed main battery|http://aps2.toshiba-tro.de/kb0/TSB3C03JR0000R01.htm]
    An short feedback would be greatly appreciated.

  • Cinema Display Power Light Suddenly Not On & Power Button Not Responding

    So, I've had major problems with my G5 which Apple diagnosed as being the board (and then the video card etc...). They gave me a $700 credit towards a new machine (I got a new MacBook Pro) but before I put the old G5 up for sale I wanted to try pulling some of the RAM to see if the problem was just faulty RAM. I pulled a gb from OWC I put in after purchasing the machine. Pressed power and I got the start-up chime which I haven't been able to get forever, AND the fans didn't go into turbo mode like it did before. BUT, my display which I had left plugged in for the last 6 months and whose power button has been continually lit up with the machine unplugged.......now won't light. What happened? Please HELP!!!

    Happened to me last week and I did eveything possible to investigate if my power unit was broken, cable damaged, fuse blown etc.  In the end I simply reset the PRAM and as if by magic the Cinema Disply came back.  Touch wood it has been alright since.  http://support.apple.com/kb/HT1379?viewlocale=en_US

  • NOKIA 202 RED BUTTON NOT WORKING

    I JUST TURNED OFF MY PHONE 202 AND  after some time i try to switch on that phone but red button not worked  and other keybuttons works good and i try flash the phone but it says remove cable and batery and put cable and put batery and power on but funny thing is my red button not worked and i just got dull finally i am asking you guys is there any solution to power on i try almost all key board tricks i.e * 3 gren red etc  or a software to power on.MY NOKIA 202 RED BUTTON NOT WORKING 

    Hi, DEVRAMP. How did you flash your phone? Is there a battery indicator when you charge it? You may try the following solution below:
    Check that the keypad is not locked.
    Make sure that all keys are responding correctly when they are pressed. In some cases, a key may get stuck and freeze the whole keypad.
    Try removing and replacing the covers (if your phone supports that feature). Check that the power and side keys on the cover are properly aligned (e.g. pushed out) to their respective positions to have a proper tactile feel when pressing the keys. 
    Keep us posted. 

  • Is anyone having trouble with the "home" button not responding after upgrading to 5.1.1 OS?

    Is anyone having problems with the "home" button not responding after upgrading to 5.1.1?

    You will not belive how I accidently solved this - !!!
    Yes I had the problem immediately after the 5.1.1 'cloud' upgrade, the problems started (on my iphone 4) ... I followed the 'get power down button, then hold HOME for 30 secs' solution, but no result, nothing seemed to work and I was starting to get a bit agressive with the keep it pushed, multiple double click frustrations, icopybot multigesture solutions etc. and paid money ... but this comedy solution now works ...
    I discovered it because I ordered a waterproof case for my iphone for my motorcycle ... I've just fitted it to my iphone and all the problems have gone ??? what! ... so wondering why I looked at what the home button on the casing was doing - it was pressing ACROSS the home button i.e. it converted my finger point into a wider 'PRESS
    so taking the new case off, instead of using the point of my thumb to press HOME, I used the flat of my thumb to emulate it ....and initially nothing, so I wondered if it wa making better 'cross button' contacts, so I licked my thumb, wiped it and then tried again! - it worked!
    I can't explain it but it seems to work - try it! if the double click on HOME doesn't work lick your thumb dry it and try again! I've just done it again
    what a mad techno world we live in! :-)
    Dave

  • Power button not working

    iPopd touch 4th generation sleep/power button not working.
    Any ideas? how long is warranty?

    The standard warranty is one-year. Yu can purchase, before the one-year is up and additional year. Yu can check your coverage here:
    Apple - Support - Check Your Service and Support Coverage
    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • Power button not working with 7.1 update

    Power button not working with 7.1 update

    I take it your phone was still under warranty then?!
    Unfortunately I was not so lucky, and my experience was rather poor service-wise. They're called Apple Geniuses but I beg to differ...
    I'm not sure where in the world you are located, but my "experience" involved visiting the Leeds store and confusing everyone with this issue. I can tell you, just by the looks on their faces, they had never been faced with this problem before!
    I suggested my phone was rolled back to the version it was previously to establish whether this was the underlying issue. I was asked whether my phone had been backed up and as it had the "genius" proceeded to restore the phone "as it came out of the factory" to quote him.
    When this was completed the phone was still doing the same thing and I was advised "the software update must have highlighted a hardware issue." I was told it would have to be physically repaired and was told to have this done by a third party as Apple would charge approximately £160. Incidentally, I work in IT and repair PC's, laptops and mobile devices for a living and made a point of raising that a sleep/wake button ribbon cable for an iPhone 4S can be bought on eBay for as little as £3.00...if indeed it does need replacing, which I suspect it does not.
    Anyway, so now I was left with a phone for the rest of the day which was blank and still the problem remained. On the train, on the way home, you can then imagine my disbelief when I actually took the time to look at my phone's configuration and realised that iOS version 7.1 was still installed, so obviously the issue would still remain. So the visit to the "genius bar" was a complete waste of time as I'm still in the very same position, and I still blame the 7.1 update for this...let's home 7.2 is released very shortly and this solves the issue...
    I have downloaded the package to roll the version back to 7.0 but I'm a little reluctant to carry this out yet as I would expect Apple to so the issue they have caused. This is NOT hardware related but software.
    I seriously think Android is calling me...

  • Power button not working properly for iphone 5. Warranty expired on 22 nov 2013 what to do?

    Hi,
    Power button not functioning properly for my iphone 5. Kindly give advice on what to do. Its warranty expired on 22nd november 2013.

    Read here:
    https://ssl.apple.com/support/iphone5-sleepwakebutton/

  • Buttons not responding correctly

    Help
    I am trying to get a simulation to work but I have problems
    with buttons not responding to actionscript properly.
    Here is how I have it layed out:
    I have a labels layer with 12 keyframes labeled scn2A,
    scn2B...scn2L
    I have a buttons layer with all of the buttons on it.
    The buttons layer has 12 keyframes.
    One button advance to the next frame, the other advances to
    the next scene.
    Each keyframe has the same buttons but different instance
    names. scn2DwnA_btn, scn2DwnB_btn...scn2DwnK_btn.
    The last keyframe uses a different button with an instance
    name of scn2Ok_btn
    here is the problem, when I test the movie everything works
    fine until the last frame.
    The DOWN button is used to advance each frame and then the OK
    button is used to advance to the next scene
    The down button has no script in the last frame but it is
    advancing to the next scene upon a mouse click.
    I would be glad to email source to anyone who would like to
    help.
    Thanks

    The code is just basic button code:
    scn3Ok_btn.onRelease = function...
    all code for each button is on a frame in an actions layer.
    each frame is a keyframe.
    So frame one actions would reference the instance names for
    the buttons in frame one of the timeline.
    Frame two actions would reference the instance names for the
    buttons in frame two of the timeline.

  • HT1688 Power button not working

    Power button not working on iPhone 5

    This is a defect on iPhone 5 power button that wears out in about 13-14 months of usage just after you go out of warranty. Apple is aware of this issue but chooses not to accept this as a defect. I asked the Genius bar guy and they told me this is a common case recently and costs $269 to replace your phone. There is no repair option. I am very mad and believe Apple needs to take action or will lose their customers. All iPhone 5 owners that I know started having this problem in the month of 13 -14.
    I believe if the numbers go high, Apple may start a recall program. Please encourage anyone with this problem to post here. $700 phone should not wear out this soon. Apparently the part is defective on almost all iPhone 5 devices.
    Other threads about this:
    https://discussions.apple.com/message/23797113#23797113
    https://discussions.apple.com/message/23258974#23258974

  • Iphone 5 power button not working!! They have replacement program for months but why they dont email you and say it??

    I have had iphone 5 and have never been happy and i think apple is not leading the technology and future of market anymore as they are lowering quality of their products(even hardware). I had to change first iphone 5 i had because of wireless issues and then i had battery problem  and had to charge 3 times a day and finally after 2 years i bought they decided that its faulty and they decide to change it. Luckily enough i read it on an online tech magazine and after googling i see that they have had replacement for power button as well which i am eligible for as well!! i go to genius bar and they replace battery but they dont replace power button cause they examine it and passes till the audio dock test! It connects to charder dock or cable but it doest to audio test dock and he says one off the pins inside is not right but it charges perfectly with every cable in the store!! And i tell him that they have to change power button not the charging pin cause it doesnt make sense!! Its a faulty product and maybe if they emailed and said it nearly a year ago my pin was right then!!  so i think they found a silly reason not to change it and so i am struggling with that phone and brand  that i hate(once i used to love)!

    ahmetfromlondon63 wrote
    And I don't know what these guys are talking about? I have an unsolved hardware issue and I posted here!
    This is a user-to-user technical support forum. This is not AppleCare. You are not addressing Apple here. No one here can help you resolve your customer service issue with Apple. Use the Contact Us link at the bottom right of every page for information on how to contact Apple directly. When you talk to them, I'd suggest not using profanity. It makes people less likely to help you.

  • After updating to iOS 6.0.1 volume button not responding even theirs no volume slider in music app nor video app plz help m using iPhone 4 os Windows 8

    After updating to iOS 6.0.1 volume button not responding even theirs no volume slider in music app nor video app plz help m using iPhone 4 os Windows 8

    I suppose that you can demand all you want. It would have to be proven that the iOS update broke this particular function but it could also be said that it was just a matter of time that the broken thing manifested itself. Since the phone is out of warranty, it could also be said that it is your risk to update software. I'm not trying to be argumentative here, but we are not Apple. We are users like you and just try and provide support to other users. What you decide to do from here is your decision. I've given you all I know to do.

Maybe you are looking for

  • Music doesn't have 'albums' anymore, just playilists, composers, songs etc.. What have I done?

    A few days ago I bought a new album, by mistake checked it in 'selected albums only' for sync - then only that album was on my iPhone. I reverted it back on iTunes to all music library, but instead of 'albums' in 'more' I have that one album... How d

  • OC4J hanging

    The OnlineOrders sample in Oracle HTTP Server can run perfectly with BC4J libraries in Oracle8.1.7 or Oracle9iAS 1.0.2. However, OC4J will hang when I try to run it with new BC4J libraries in JDeveloper3.2.2/3.2.3. Does this mean that OC4J only works

  • Mac Pro 1.1 running Snow Leopard - itunes upgrade?

    I have a Mac Pro 1.1 running Snow Leopard, my current version of itunes won't let me sync my iphone but it won't let me upgrade to the new itunes either, is there anything i can do?

  • Presario V3000 Crashes or Sleeps from time to time

    I have a laptop Compaq Presario V3000 lately it crashes or sleeps without any notices or without me doing anything. I need to finish my job and it just annoys me to wait for 10 to 15 minutes before the Power button reacts to put it back to work. It i

  • Its stuck! model a1019 20gb....what is this one called?

    HiFolks , My ipods stuck..... its a early 20 gb click wheel I think? I turned it on after charging it and it got stuck after a couple of clicks , asif to play now I can't do anything????my ibook doset even see it!!! crap i hate that! its worked fine