NOKIA 6610i GOTO function is not working

Hi, I have a 66101 and its having problem of getting reset when go to is pressed (upper Right key) or when selected thru menu.
Pls help to resolve this issue.

Keep in mind though that unless you have a function based index, the predicates WHERE RTRIM(CODETABL)='PWRKTYP' AND RTRIM(CODEVAL)=RTRIM(WORKTYPE) will result in a full table scan.
The RTRIM() function is essentially a data scrubbing/fixing function that you apply. It is usually more sensible in applying that once and pay the cost for that once (e.g. via a trigger) - and not every single time that the table needs to be hit using those columns as as predicates.
Besides the function overhead, the function also prevents the use of any standard (i.e. non function-based) indexes on those columns.

Similar Messages

  • Nokia Charging Stand NFC does not work on 920

    I just received my Nokia Charging Stand DT-910 to go with my ATT Nokia 920.
    1) I ordered the black stand.  The stand and proprietary cord are black, but that huge AC charger is actually white.  I can't believe that they didn't match the color on such an expensive accessory.
    2) The actual NFC functionality does not work for me on the 920.  Yes, when I tap the 920 to the base of the stand, I correctly get the NFC popup, and when I accept it takes me to what is obviously the Nokia software.  The screen is titled "Charging Stand", and it starts on the Set Up page.  It shows a diagram of the charging stand.  The problem is that this app hangs.  The progress dots on the top of the screen never stop moving.  And the list where I am supposed to choose the application to open stays greyed out and never responds.  It just continues hung like this forever, or on one occasion the phone rebooted itself.
    Is there a fix for this?  The software hang is making my stand useless in terms of it's NFC functionality....

    You can actually get to more support options from that link, like here, http://www.nokia.com/us-en/support/contact/ which offers chat and phone numbers. Not sure what could happen in this case though, as there just seems to be some issues in the NFC implementation. Seems it varies a bit between devices, but overall has some issues. I would guess the number of folks with a wireless charge capability, that also know about this forum is probably small, but I'm sure the issue will gain some visibility as more folks give it a try. As I said I got it past the streaming dots and selected an app to launch, but now I have the interminably slow app launch. The same app that springs up instantaneously from the start or program menu, takes 5-10 minutes to launch when initiated via the NFC tap. I've just turned this off for now, as I expect some software update at some point. I have done some other NFC stuff with marginal success. Tapping the charging base to start an app is not a make or break feature for me. If it is for you, contact Nokia directly, rather than through this user forum.

  • Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

    Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

    I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

  • "Open In.." function is not working

    Hi, "Open In.. " function is not working on my iPad since the first time I recieve it..
    it once worked twice, and it took a long time to load PDF file, but never worked again
    the apps list is there, but when I click the app, nothing happened.
    please do help,
    thanks

    Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
    Also close all apps completely : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Copy Function is Not Working properly In Order Management

    Hi,
    Description-
    When an order with remnant model is copied, it copied only the topple model line and they include items attached to the top model line. It doesn’t copy the
    option class lines and the option item lines (unshipped and shipped).
    Example-
    Enter an order with for pd-pto-model. See order#21231.The ordered quantities and structure of the model is shown below:
    pd-pto-model 5 qty
    pd-std-item1 (included item) 5 qty
    pd-pto-oc (option class) 5 qty
    pd-std-item1 (included item with rfr checked) 5 qty
    pd-std-item2 (option item with rfr checked) 5 qty
    pd-std-item3 (option item) 5 qty
    Booked the order and pick relased the order. While shipconfirming only shipped 5 qty of pd-std-item3 and staged the rest. On querying the sales order, the line status is seen correctly as follows:
    pd-pto-model Closed
    pd-std-item1 (included item) Picked
    pd-pto-oc (option class) Closed
    pd-std-item1 (included item with rfr checked) Picked
    pd-std-item2 (option item with rfr checked) Picked
    pd-std-item3 (option item) Partially Interfaced to receivables
    Copied this order from the order header. The new order# is 21232.On querying the order, I see only 2 lines as follows:pd-pto-model.
    Anyone can help me on this issue.
    Thanks,
    Chinna

    haisrig wrote:
    Hi ,
    We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
    Program name :- sel.cpp
    int main()
    struct timeval sleeptime;
    sleeptime.tv_sec = 60;
    printf("1\n");
    select(0,NULL,NULL,NULL,&sleeptime);
    printf("2");
    return 0;
    When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
    When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
    When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
    I think because of that the above select function is not working properly in solaris 10.
    Why the tv_usec is not taking 0 as default values in Solaris 10?
    We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.Hi
    It sounds to me that you've been lucky for 20 years then.
    Local POD variables on the stack that aren't explicitly initialized can contain any value. Here's what I see in your app with dbx
    (dbx) run
    Running: sel
    stopped in main at line 9 in file "sel.cpp"
        9      sleeptime.tv_sec = 60;
    (dbx) print sleeptime
    sleeptime = {
        tv_sec  = -4198732
        tv_usec = 0
    }That's on a Solaris 10 SPARC machine. If I try it on a Solaris 10 x86 box then I get
    (dbx) print sleeptime
    sleeptime = {
    tv_sec = -830490588
    tv_usec = 134510556
    and I see the behaviour that you describe.
    Paul

  • Select() function is not working properly in solaris 10.

    Hi ,
    We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
    Program name :- sel.cpp
    int main()
    struct timeval sleeptime;
    sleeptime.tv_sec = 60;
    printf("1\n");
    select(0,NULL,NULL,NULL,&sleeptime);
    printf("2");
    return 0;
    When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
    When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
    When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
    I think because of that the above select function is not working properly in solaris 10.
    Why the tv_usec is not taking 0 as default values in Solaris 10?
    We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.
    Thanks a lot.
    Regards,
    Srikanth.

    haisrig wrote:
    Hi ,
    We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
    Program name :- sel.cpp
    int main()
    struct timeval sleeptime;
    sleeptime.tv_sec = 60;
    printf("1\n");
    select(0,NULL,NULL,NULL,&sleeptime);
    printf("2");
    return 0;
    When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
    When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
    When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
    I think because of that the above select function is not working properly in solaris 10.
    Why the tv_usec is not taking 0 as default values in Solaris 10?
    We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.Hi
    It sounds to me that you've been lucky for 20 years then.
    Local POD variables on the stack that aren't explicitly initialized can contain any value. Here's what I see in your app with dbx
    (dbx) run
    Running: sel
    stopped in main at line 9 in file "sel.cpp"
        9      sleeptime.tv_sec = 60;
    (dbx) print sleeptime
    sleeptime = {
        tv_sec  = -4198732
        tv_usec = 0
    }That's on a Solaris 10 SPARC machine. If I try it on a Solaris 10 x86 box then I get
    (dbx) print sleeptime
    sleeptime = {
    tv_sec = -830490588
    tv_usec = 134510556
    and I see the behaviour that you describe.
    Paul

  • I just bought an iPhone 4s. Now the search iphone function is not working. When I swipe the screen to the left, the search box appears but when I type what I want to search for, there is no action. Please help.

    I just got an iphone 4s. Now the search iphone function is not working. When I swipe the start screen, the search box shows up. But when I type what I want to search, there is no action. Please help.

    Try this...
    You will Not Lose Any Data...
    Turn the Phone Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... (But can take Longer...)
    Release the Buttons...
    Turn the Phone On...

  • How to delete multiple songs from iPhone 5S without losing form iTunes? The unchek function has not worked. Why?

    How to delete multiple songs from iPhone 5S without losing form iTunes? The unchek function has not worked. Why?

    Sorry I had to reply through your profile Gail from Maine, my PC has java issues. In any event, when I delete them directly from my device everything is perfect and cool. However, in the rare instance I want to add new music that I actually buy in stores (I know, quite the unique and old-fashioned idea...but hey Im an audiophile) once I upload the tunes, everytime I sync my library it re-adds everything that I spent hours deleting. In a perfect world, I thought I could maintain a massive iTunes Library, and add or delete (remove) songs from my iPhone to save both memory or keep my iPhone selections more current/apt to my musical "tastes" at that time. I know about the whole playlist thing, but thought there might be an easier way. ie - checking/un-checking the little box next to the song name, and then doing a sync. Again, everytime I do this however, whether everything is checked or un-checked it adds the entire library! So frustrating. Any suggestions. Thank you graiously in advance for your help.

  • Palm Desk Top 6.2 Address Look Up Function Does Not Work In Windows 7

    I recently upgraded my desk top computer's operating system from Windows Vista Home Premium to Windows 7 Home Premium.  I synchronize with a Palm Tx PDA.  HP PalmOS customer support Chat helped me work through a compatibility issue that was preventing display of Address, Calendar, Memo and To Do items on my desk top computer via the Palm Desk Top 6.2 application.  I now find that the address look up function does not work (although it worked fine when I was running Vista).  Without success, I tried running the repair tool as well as reloading the software (both overlay and clean reinstall).  I would appreciate any help or suggestions to fix?
    Post relates to: Palm TX

    Hi,
    844869 wrote:
    CREATE TABLE TEST_EMPLOYEES
    FIRST_NAME VARCHAR2(26 CHAR),
    GRADE VARCHAR2(5 CHAR)
    INSERT INTO TEST_EMPLOYEES (FIRST_NAME, GRADE) VALUES ( 'William', 45 ); ...Thanks for posting the CREATE TABLE and INSERT statements; that's very helpful.
    William&45     1
    Robin 43     1
    Raymond          43     1
    Richard          43     1
    Karen          28     1
    Michelle               1
    Jonathan               1
    Mark               1
    Ann               1You may have noticed that this site normally doesn't display multiple spaces in a row.
    Whenever you post formatted text (such as query results) on this site, type these 6 characters:
    \(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing.
    This is one of the many helpful things found in the forum FAQ {message:id=9360002}
    Are the results above what you're getting with some existing query, or are they the results you want? 
    If those are your current results, post your query.  In that case, what are the results you want?  Do you want this?FIRST_NAME GRADE RNK
    William 45 1
    Robin 43 2
    Raymond 43 2
    Richard 43 2
    Karen 28 5
    Michelle 6
    Jonathan 6
    Mark 6
    Ann 6
    Edited by: Frank Kulash on Feb 21, 2013 2:39 PM
    I see you've added the desired results to your original message.
    Here's one way to do that:SELECT first_name
    ,     grade
    ,     RANK () OVER (ORDER BY grade NULLS FIRST)     AS rnk
    FROM     test_employees
    ORDER BY grade          DESC     NULLS LAST

  • New iMac (10.9.4) & now my HP Photosmart 6520 "scan to computer" function does not work

    Recently upgraded to a new iMac running 10.9.4.  Printing works well from this computer and all other devices (iPad, iPhone, etc.).  However, the "scan to computer" function does not work.  In the "Scan" section of HP Utility when I click on "Scan to Computer" the error message reads "Scan to Computer Cannot Be Enabled. The software required for Scan to Computer could not be located on this computer. Please download and install the latest HP recommended software for your device from http://www.hp.com/support, and then try again.
    Of course I have done this... twice... still no luck.  Also ran Software Update and there was an update, but it made no difference.

    Yes, did all that... in order.  It did not resolve the problem.  However, I did find what appears to be the answer.  After re-installing the driver software DO NOT immediately follow the prescribed steps.  Instead, quit the installer, restart the Mac, and an Apple software update will appear after restart.  Install that software update, and even though the computer and software do not call for it, restart the Mac again.  Only then add the printer and follow the balance of the steps.  It works!   Thank you for your help.

  • Radio button and associated functionality is not working!

    Hi Pros,
    I am facing the following problem:
    1.I have an interactive PDF created in Acrobat 9 Pro.
    2.PDF have few radio buttons, each radio buttons ahave assigned valus(eg: 1,2,3 etc)
    3.I have a text box in which the value of selected radio button is displayed.
    4.PDF is working fine on my machine.
    5.Client is having Internet Explorer version 7.0.5 and Adobe reader:8.2.6
    6.The radio buttons and associated functionality is not working on client's machine.
    7.The text box shows '0' even if we a radio button with value 2 or 1 is selected.
    What will be the problem? How can I fix this issue?
    Please help.

    Thanks alot for helping me on this.
    Thanks to u also ~graffiti

  • AcroPDF ActiveX print functions are not working with Adobe Reader 9.2 / Actobat Reader 9.3

    AcroPDF ActiveX print functions are not working with Reader 9.2/9.3. Tried ActiveX print functions like printPages(), printAll(), printWithDialog(), none of them is working. Tried on platforms: XP 32 bit and Win7 32 bit. These print functions all work fine with Adobe Reader 9.1.0. or 8.2.0 or 8.1.0 on XP 32 bit or Win7 32 bit.
    The way I have my setup: I have created a C/C++ project with AcroPDF MFC ActiveX classes. I have created an AcroPDF object in there, and then calling it's LoadFile() function passing a pdf file in the parameter. Then calling the printPages() or printAll() function. With Adobe Reader 9.1.0. or 8.2.0 or 8.1.0, printing is starting through the default printer without any problem. As soon as I update the reader version to 9.2 or more, the same code stops working.
    Is anybody noticing any similar issue? Any info on this will be highly appreciated. Thank you!

    Unfortunately printWithDialog() is also not working. Actually none of the print functions like Print(), printWithDialog(), printPages(), printPagesFit(), printAll(), printAllFit() are working. All of them works fine though with older reader.
    BTW, what security related changes are there for printPages() and printAll()? Can you please elaborate on that? Is there any workaround?

  • Crystal Report for VS2010 - The Go To Page function does not work

    When running a report into Crystal(VS2010), the Go To Page function does not work.  Typing in a page number and pressing Enter does not take you to that page.  The report remains on the current page. I'm not sure if there is suppose to be a button like the one in Crystal 8.5(VS2008).

    As long as you are using the CR assemblies for VS .NET, the viewer (Win) should look like this:
    Remember, the ActiveX viewer based on the Report Designer Component (RDC, referencing craxdrt.dll) is not supported in VS 2010.
    - Ludek
    Follow us on Twitter
    Got Enhancement ideas? Try the SAP Idea Place
    Share Your Knowledge in SCN Topic Spaces

  • Save functionality is not working in adobe reader

    hello,
    i am designing layout for offline adobe forms in Adobe Live Cycle Designer ES version 8.1 and having adobe reader version 8.
    i save form on PC. When i open  it shows me save button after doing changes in form m not able to save it as save functionality is not working.....Kindly suggest me any solution..
    Edited by: Gopal Khandelwal on Nov 22, 2011 12:21 PM

    Moved to LiveCycle Designer

  • Nokia 6120 Classic Accept button not working

    I have a Nokia 6120 Classic and is not working fine. I have decided to change my mobile.
    Before change my mobile I want to backup all my data and telephone numbers. The problem is that Accept button is not working correct. When I start my mobile I can enter pin number but after this I can't enter the date because I have to use Accept button (the one in the top left). Is there any possibility to skip entering date? This is the only wey to enter mobile and backup my data
    Thanks

    I was going to take it to Nokia care but duh? Should the button stop working suddenly? Without anything wrong also the same with the camera button also I'm not the first one to have this problem right? Then its not our problem but its Nokia's I thought there's another solution, but yeah I'm making angry posts can you just make good products? I see all the people complaint about that button **bleep**, you better not talk while maybe the problem from th company.

Maybe you are looking for

  • How can i delete a 'backups' from time machine for a computer i no longer have

    i have been using my time capsule for a few years now, everything was great until my imac died and i had to replace it when i did, the time capsule worked perfectly, as it allowed me to "migrate" all my backed up data onto my new machine, joy but now

  • ITunes wont recognize blank CDs

    I am all up to date on my updates for both iTunes and my macbook and for some reason when I try to burn a CD through iTunes it wont recognize the blank disc. I have burned discs through iTunes before and have used these particular blank CDs as well.

  • Query rounded up values

    Hi All, my query as seen through the SAP Portal. when i look at the graph, X-axis, Count % values. Ideally these are whole number results, rounded up or down as appropriate, versus real numbers and the trailing decimal values. when my query executed

  • CRM On Demand Customer Support Webinars

    All, if you click on Training and Support link in the upper right of your On Demand application you will see under News and Announcements a webinar "Common Issues in CRM On Demand Analytics" scheduled on Thursday October 8 at 2:00 PM MT. This will be

  • SAP long material number

    Hi Experts, My client wants to implement to new ECC 6.0. We have requirement where the material number is greather than 18 and material descreption is less than 40. Is there any functionality in SAP to have more than material number is 18? Looks like