Nokia Connection Manager - Cannot use the connecti...

Can someone PLEASE try and help me
I have the following details:
Phone: Nokia C5;
Operating system: Microsoft Windows XP Service Pack 2
Nokia PC Suite: Version 7.1.60.0
I cannot use bluetooth & USB connection. When I try to select it in the Connection Manager I get an error message " Cannot use the connection type. Check that all the needed hardware, software and drivers are available. (Code: OpenMedia) ". I have tried to reinstall nokia pc suite but no result. The connection worked before. The PC Suite of my computer was upgraded and now the bluetooth & usb are not working any more.
Please Help Me
Attachments:
Nokia_Connection_4679E9820AC32C34D11CBCDBA8237BA5_5.jpg ‏20 KB

Could you please try this?
I am not sure whether this will solve your problem but you could try this once.
1. Disconnect your phone from PC if connected.
2 .Open Control Panel and go to ‘Programs and Features’
3. From the list of available programs, choose ‘Nokia Connectivity Cable Driver’
4. Click on the ‘Change’ button on top toolbar.
5. In the setup dialog box that pops up next, choose ‘Repair’ and select ok. Wait for setup to complete.
6. Restart the computer if prompted.
7. Now connect your phone to the PC. Driver installation should complete and PC/Ovi suite (hopefully) should detect your mobile properly now.
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Similar Messages

Nokia connection manager: cannot use the connectio...

I'm using Nokia PC Suite 6.80.22 on a Fujitsu laptop (Windows Vista). This is the technical stack:
Operating system:
Microsoft Windows Vista
Build 6000
No service pack installed
Language: English (United States)
Language for non-Unicode programs: English (United States)
Locale: English (United States)
Input language: English (United States)
Nokia PC Suite:
Version 6.80.22
Language: English
Connectivity Cable Drivers:
Version 6.80.5.1
Bluetooth stacks:
Microsoft Bluetooth stack
Version 6.0.6000.16386
Toshiba Bluetooth stack
Version v5.00.07
I have problems while trying to connect to my phone via Bluetooth. It shows the following error: Cannot use the connection type.
In the PC Suite I go to Manage Conections and I see two bluetooth interfaces:
- Bluetooth(Microsoft) THIS IS ENABLED
- Bluetooth(Toshiba)
When I try to disable the Microsoft driver and enable the Toshiba driver it show the error: CANOT USE THE CONNECTION TYPE (CODE: OPENMEDIA)
Any ideas will be highly appretiated!

I have exactly the same problem only my operating system is a bit different. I surfed through the net with no luck
This is my system's details:
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English (United States)
Language for non-Unicode programs: English (United States)
Locale: English (United Kingdom)
Input language: English (United Kingdom)
Nokia PC Suite:
Version 6.81.13.0
Language: English
Connectivity Cable Drivers:
Version 6.81.1.2
Microsoft Outlook:
Version 10.0
Build 2616
Bluetooth stack:
Microsoft Bluetooth stack
Version 5.1.2600.2180
Furthermore, my infrared connection and USB modem doesn't seem to be working. I have installed and re-installed the Nokia PC suite throughly. I dont know if my computer has something disabled or whether it's my phone (N95)
Any suggestion would be grately appreciated,
Do let me know if you found the solution to this prob.
Cheers,
Helpless

"Cannot use the connection type ...."

Nokia 6233
Windows XP SP2
LaunchApplication.exe v 6.82.70.1
Bluetooth "i.Tech BlueCON U"
O2 Bluetooth Dongle Drivers
Using Bluetooth OK to download photos to PC, but no other function so far.
Trying Nokia PC Suite to perform various functions - failure in all cases, common message is "Cannot use the connection type. Check that the needed hardware, software and drivers are available".
No clues anywhere as to what is needed.
Bluetooth clearly works. Nokia PC Suite can't use it.
Totally stuck - wish to use PC connection to synchronise address books.
Help, please.

Hi,
I think that PC Suite is not support your Bluetooth driver. Here you can find what drivers are supported:
/discussions/board/message?board.id=connectivity&message.id=114
Anyway, if Microsoft's BT driver support your BT HW, you can try to that stack also...
So, if you want to try to use MS BT driver:
1. Go to Control Panel, System, Hardware and Device Manager.
2. Open Bluetooth Devices, select that device, click Action, Uninstall and OK.
3. Click Action and Scan for hardware changes.
(windows should automatic install MS BT driver)

I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

I connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone.

i connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone. what should i do.?

First, you do not have a 3G if you could upgrade it to 6.1.3, because 4.2.1 is the last version that will work on the 3G. So you either have a 3GS or you somehow hacked the phone to install an incompatible version. You can check the model you have by entering your serial number here: https://selfsolve.apple.com/agreementWarrantyDynamic.do
Assuming you have a 3GS the most likely reason for your problem is you have a gray market phone that was hacked or jailbroken to unlock it. When you upgraded it you removed the hack, so the phone is now locked to its original carrier.

I have CS 6 which requests I sign in to access my serial numbers, which I have already, and it fails to connect so that I cannot use the programs. How do I get past this, is there a direct line to customer support?

I have CS 6 which requests I sign in to access my serial numbers, which I have already, and it fails to connect so that I cannot use the programs. How do I get past this, is there a direct line to customer support in the UK?
Thanks

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

HT204291 Help! I cannot see the Airplay symbol on any of my devices anymore! I have tried following all guides and troubleshooting, but to no avail. Just cannot use the AppleTV with any of my devices.

Help! I cannot see the Airplay symbol on any of my devices anymore! I have tried following all guides and troubleshooting, but to no avail. Just cannot use the AppleTV with any of my devices.

Thanks for the link. It didn't work at first on any of the devices but then I decided to enter a manual DNS instead of an automatic configuration. Then followed the steps again from your link and it worked.
It is not stable though as I need to reset the device for it to see the airplay. But when it is connected it stays connected for 30 minutes approx.
Any other suggestions to keep it stable would be fantastic but at least in the meantime I have a workaround.
Thanks

Can not port forward on WRT54GS v6 "You cannot use the router IP"

Hello, I'm trying to open a port number, but when I try to use my router's IP, the following message appears
"You cannot use the router IP, network, or broadband address"
[IMG]http://i45.tinypic.com/107qond.jpg[/IMG]
My ADSL was working as a NAT behind a NAT connection, so I had to change my Local IP Address to 192.168.2.1.
Router: WRT54GS v6 firmware 1.52.8 (latest) - Bellsouth router: Westell 6100
Microsoft Windows [Version 6.1.7600]
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . : launchmodem.com
   Link-local IPv6 Address . . . . . : fe80::40a9:a76e:61b3:6435%11
   IPv4 Address. . . . . . . . . . . : 192.168.2.100
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.2.1
So, please help me, how can I open ports on my router? =[
PS: I tried to use 192.168.2.100, and even though it lets me use it, it still seems not to open that port... my IP is dynamic.

Generally: NAT behind NAT is a bad idea. There is usually no need for double NAT. Either configure the ADSL router as bridge and use the WRT for your internet connection or set up the WRT as simple access point behind the ADSL router.
It's also unclear to me what is working or not. First I thought you can't set up forwarding at all because you get that error message. Then, in your PS you write you tried to use 192.168.2.100 and that seemed to be possible. The IP address to forward to must be the IP address of the computer to which you want to forward. Thus 192.168.2.100 is exactly the IP address you have to set up. Does this work or not?
Also remember: with double NAT you must set up two forwardings: first on the ADSL router then on the WRT. Port forwarding is necessary to allow incoming traffic through NAT. All incoming traffic arrives on the ADSL router. Thus setting up port forwarding on the WRT only won't do a thing.
It's also not recommend to use dynamic IPs for forwarding destinations. Dynamic IP addresses may change over time and that requires you to adjust forwardings accordingly. It's better to reserve fixed IP addresses (if your WRT supports this) or set a static IP address on the computer outside the DHCP address pool.

When i try to send a message in mail it says it cannot use the server. I know very little about macs and need help

i need help with the email on my mac. it says i cannot use the sever. any help would be awesome thank you

If you are trying to connect to your ISP e-mail account. The ISP will help you setup and connect to your e-mail account. So, you might want to give them a call.
Usually, when you are told that you can't use the server it means that there might be an error (either a wrong name/ address / password/ connection type/ etc.) so check your settings again...
Else you could try the following:
http://support.apple.com/kb/HT1277
http://www.switchingtomac.com/tutorials/how-to-check-your-hotmail-using-mailapp/

HT4623 Why I cannot use the new feature of phone after I upgraded to ios 6???

I have already upgraded to iOS 6, but why I still cannot use the new feature of phone??
I cannot reject calls by sending them message. What happen??

While ios 6 is compatable with the iPhone 4, many of its features are not available for the 4. The features need the 4s or 5. See here:
Turn-by-turn navigation is available only on iPhone 4S, iPhone 5, and iPad 2 or later with cellular data capability. Flyover is available only on iPhone 4S, iPhone 5, iPad 2 or later, and iPod touch (5th generation). Cellular data charges may apply.
Siri is available in Beta only on iPhone 4S, iPhone 5, iPad (3rd generation), and iPod touch (5th generation) and requires Internet access. Siri may not be available in all languages or in all areas, and features may vary by area. Cellular data charges may apply.
FaceTime video calling requires a FaceTime-enabled device for the caller and recipient and a Wi-Fi connection. FaceTime over a cellular network requires iPhone 4S, iPhone 5, or iPad (3rd generation) with cellular data capability. Availability over a cellular network depends on carrier policies; data charges may apply.
Offline Reading List is available on iPhone 4 or later, iPad 2 or later, and iPod touch (5th generation).
Made for iPhone hearing aids require iPhone 4S or iPhone 5.
Panorama is available on iPhone 4S, iPhone 5, and iPod touch (5th generation).
Find My iPhone and Find My Friends enable you to locate iOS devices only when they are on and connected to a registered Wi-Fi network or have an active data plan.

MacBook 2.16GHz Intel Core 2 Duo cannot use the wirless but

Dear expertise
I brought a MacBook 2.16GHz Intel Core 2 Duo, Mac OS10.4.10 cannot use the wirless via router. However, when I installed the Window xp in my macbook, I can connect with the wireless via the same router (the security mode has WEP, WPA Pre-shared key & WPA radius), . I reset the router in no Encryption, reset, let the macbook (in window xp) access the internet, and then change the router in WEP. Finally it can connect! But in OSX , it still doesn't work.
Please give me some advice. Thanks a lot!

Use WPA preshared key instead of WEP. WEP can be cracked within a few minutes. Plus with WPA you really just have to enter the passphrase from the router on the Mac. It is not so complicated compared to WEP.
With WEP you cannot use the passphrase from the router on the Mac. You have to enter the WEP key. Use the first WEP key. Also make sure that you have selected transfer key 1 if the router has this option.
On the Mac you have to enter the WEP key with an "$" sign in front. This tells the Mac that you enter a hexadecimal WEP key, e.g. $A1B2C3D4E5
Message Edited by gv on 10-20-2007 01:12 AM

Why am I getting error "The deployment cannot use the VirtualNetwork MyProjectVN that belongs to a region."?

I have a Virtual Network configured in Azure with Site-2-Site VPN, it works fine and connects to our on premise VPN network.
I have a web role that I would like to deploy into this VN. I have two cloud configurations, DEV and TEST, both are deployed to their own designated cloud service instance.
Previously, only the DEV configuration was published to the VN, and it worked properly without any problems. However, today I also wanted to publish the TEST environment into the VN, but I get the error message "The deployment cannot use the VirtualNetwork
MyProjectVN that belongs to a region.".
What can be the reason for this? I didn't choose any regions when setting up the VN, and both cloud service instances are in the North Europe location.

Hi Mark,
Based on my research, I haven't found any related official documents indicate this kind of difference between Staging and Production. Accroding to the error message, you can create a virtual network within an affinity group to see if the issue persists.
In addition, since it is related to Web roles, you can also ask in the forum below for assistance:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=windowsazuredevelopment
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

I get ios6 for my iphone 3gs but I cannot activation it and now I cannot use the phone

I get ios6 for my iphone 3gs but I cannot activation it and now I cannot use the phone

I saw a message on screen : the activation server is temporarily not in use, the iPhone not activated.
Try connecting your iPhone to iTunes to activate it or after a few minutes and try again.

How do I load drives when there is nothing on the web site and i cannot use the disk

cannot set up. shows up on my laptop, but is not really connected. cannot use the set up disk because i do not have drive for it and the drivers are not showing up on the website. what should I do?

suze123 wrote:
cannot set up. shows up on my laptop, but is not really connected. cannot use the set up disk because i do not have drive for it and the drivers are not showing up on the website. what should I do? Hi,Have you tried this link??http://www.findprinterdrivers.com/2015/04/hp-color-laserjet-pro-mfp-m277dw-driver.html

The new 8.2 update has left me with a red itunes logo and a charger end on the screen, i cannot use the phone at all, please help

the new 8.2 update has left me with a red itunes logo and a charger end on the screen, i cannot use the phone at all, please help

Your phone is in recovery mode; connect it to a computer and use iTunes to restore it.
~Lyssa

Nokia Connection Manager - Cannot use the connecti...

Similar Messages

Maybe you are looking for