Nokia E5 "Breathing" Scroll Key Light

I seem to be having a software problem with my E5. When you do not use the device for a certain period of time, the scroll key starts blinking slowly as if it was breathing. To turn the breathing light on or off, select Standby br.light > Breathing light. Thing is, when I get to "Notification Lights", I have only one option: "Notification Light". The "Standby light" isn't there. Any ideas?

Hmm....yes....I also have that problem. The breathing light option just isn't there =[

Similar Messages

  • Elitebook9470 not turning on,scroll and cap lock keys light up

    I have an elitebook9470 which is about 2 years old. When I turn my laptop on the keys light up but the monitor remains blank. Then the scroll and caps lock keys light up however nothing appears on the monitor. I have charged my laptop and I am unsure if it is related to low power. I have tried attaching the laptop to an external monitor but no signal appears. Any help regarding this will be appreaciated. thanks for your help.
    Regards
    nush

    Hi @Nush 2015 ,
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Even though this is a Commercial product, try performing a hard reset.
    When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
    Here is a link on computer does not start.
    You could reset the BIOS with this document selecting the reloading the BIOS default settings.
    Hope this helps you out.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • 6600 fold "NAVI" scroll key

    I purchased a 6600 fold and after only 3 weeks of very light use the "navi" scroll key cracked and disintegrated,
    Nokia care point wanted to charge to replace this key which on a 3 week old phone under warranty it outrageous.
    Finally the shop where I bought it had it repaired only for the same fault to happen 4 weeks after repair, This tells me that there is an underlying problem with this flimsy plastic button, has anybody else had this problem?

    its been reported before and nokia put it down to physical damage,ive seen cases reported with hairline cracks and they are not covered under warranty either however if nokia seen this was an ongoing problem and the piece is not a good build quality they should replace it free and look into using a better material for this to fix this problem.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Pavilion dv4-1275mx notebook - once-flashing leds @ caps lock and scroll keys @ start-up

    My HP Pavilion dv4-1275mx notebook runs Windows Vista Home Premium service pack 1 for 64x-based systems.  
    Recently, when I turn it on, the led lights @ the caps lock and scroll keys repeatedly flash once.
    I'm not sure what, if anything, happened prior to this starting.  It's possible that there was a power surge when it was shut off, or it may be related to doing a McAfee virus scan or installing the latest version of a software, e.g., Adobe Reader.
    I was able to use my System Recovery disks to reinstall the Vista software, thinking this might "kickstart" my computer into working, e.g., as part of the restart process.  After the reinstallation, I was able to use my computer, although the led lights continued to flash.  However, once I shut down my computer, I have been unable to restart it.  The leds continue to flash upon start-up, and I have not been successful in again reinstalling the Vista software.  (I thought if could get my computer to work again that way, it might stay accessible if I used hiberate mode instead of shutting it down.)
    The computer's about 4-1/2 years old.  The screen has a short of some kind (only turning on when the screen is low to the keyboard, so I use an external monitor. 

    Try the steps in the following weblink:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00372748
    If the issue persists, please read the following document, understand the LED blink code, identify the root cause and try troubleshooting appropriately:
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCach...
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • My battery life at a full 100% charge is about 2 hours 22 minutes (backlight and key lights at lowest level). Should I go complaining to Apple or do I just need different software?

    My battery life at a full 100% charge is about 2 hours 22 minutes (backlight and key lights at lowest level). Should I go complaining to Apple or do I just need different software? I've only had my mac book since August 2011. The battery dies in 2 to 3 hours with some web surfing (little video play) and photo editing etc. I really don't feel like taking my computer all the way to the apple store to wait there for 5 hours to hear that I need to call someone blah blah blah. Any advice? (BTW Safari hasn't been working since I last updated my mac, WHYYYY?)

    emsavage1127 wrote:
    Should I go complaining to Apple or do I just need different software?
    emsavage1127 wrote:
    I really don't feel like taking my computer all the way to the apple store to wait there for 5 hours to hear that I need to call someone blah blah blah.
    Make an appointment at the genius bar, that way, you wont have to wait. http://www.apple.com/retail/geniusbar/

  • Blackberry Torch 9800 key lights on front of device stay on all the time, even in standby

    Hello Everyone,
    I have a Blackberry Torch 9800 and it was not giving any screen output.
    I completed a security wipe of all the info on the device and fixed the issue.
    I can use the phone now.
    Upon putting the phone in standby the screen shuts off as its supposed to, but the key lights on the front of the device stay on. This drains the battery.
    I have searched all over the internet to figure out how to solve this issue and no dice.
    The technical info is below:
    Blackberry 9800
    smartphone 3G WiFi
    6.0 Bundle 695(v6.0.0.246, platform 6.4.0.105)
    3G Brands 1,2,5,6
    Kernel v3.8 6 5
    Branding Version 1.0.75.622Q
    Micro Edition Config CLDC-1.1
    Micro edition profile Midp-2.1
    Micro edition JTWI Version MIDP-2.1
    Media version: 1.1
    Pim version : 1.0
    File version 1.0
    Bluetooth version: 1.1
    Location Version 1 0 1
    Micro Edition Security and trust Services version 1.0
    -Any input on resolving this issue would be greatly appreciated-
    -Have a great day
    Stevo

    Hello Stevo808,
    Welcome to the BlackBerry Support Community.
    Thank you for your question regarding the key lights on your BlackBerry 9800 Torch smartphone.
    Please backup and perform a reload of your BlackBerry Device Software. For more information on this procedure see the following article:
    How to update or reinstall BlackBerry Device Software using BlackBerry Desktop Software:
    http://bbry.lv/NWPC6y
    In the case that this process fails to resolve the issue, please contact your point of sale for options.
    Thank you.
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • Numlock key lights up when I press F5 and no chime is heard on start up

    HI,
    I have a 12" iBook G4 with a broken screen. So, I cannot see anything on the screen, but till a couple of hours back I could hear the start up chime. I connected it to an external monitor to see if it shows anything. Nothing came up on the screen. So, I pressed all combination of buttons on the keyboard. After that nothing is working. The numlock key lights up when I press F5 and not F6. I inserted a CD, but it doesn't come out when I press F12. The Caps Lock is working fine. Any help will be appreciated! I want to use my iBook with an external monitor.
    Thanks!

    kajari:
    Welcome to Apple Discussions.
    Have you tried starting up in Safe Mode?
    You might also want to try this procedure: Resolve startup issues and perform disk maintenance with Disk Utility and fsck.
    cornelius

  • How do you fix key light eyedropper after yosemite upgrade in ae cs5.5

    since the yosemite upgrade the key light and every other eyedropper in ae crashs the program. a pop up noting: Unable to obtain the User 'Language' registry key at: Software\Adobe\After Effects\10.5\ Defaulting to 'en_US'. could domeone please help? thank you

    If you change the After Effects preferences to use the system color picker, that might help. But, as Todd says, you're using software that is not supported on that OS. I'd recommend upgrading to CC because it has tons of useful new features (copy with property links, anyone?) and is on sale right now for rather cheap.

  • Scroll keys in Mail

    Does anyone know how to use the down scroll key when reading a particular message in Mail in order to read the message? Sometimes it does and most of the time it jumps to the following email message.
    Thanks

    pressing the space bar would do the trick.
    Other option is to set the cursors in the message and use two fingers on your trackpad.

  • X775-3DV78 - Num lock key light no longer turns on

    I just took apart may laptop for cleaning and upon re-attaching the keyboard and everything else, I noticed my Numlock key light no longer turns on? I double-checked and made sure the wires were all plugged correctly. The Caps Lock key light works fine. Any ideas? Perhaps it burned out?

    This article should help resolve the error you are getting:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
    Give the steps a try and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • N95 keys lights problem.

    hi!
    my n95 has the next simthoms: when starts the screen and upper keys lights up. lower keys dont! after stars the upper keys become dark and stay that way til next restart. the lower keys lights nevse light up. few days ago phone work perfectly, i have put sone games&**bleep** on him. a have format him, *#7370#, * 3 green power, i have update from OVI, can bi this a software problem? what can i try next? can i choose diferent version of software from OVI?
    br.

    the flex ribbon  was broken. the light senzor was the issue.
    br.

  • Having a real difficult time with Key Light

    I'm reading Mark Christiansen's After Effects CS4 Studio Techniques and Ive read the section on using Key Light 5 times and still cant get a key like his examples.  I'm trying to conquer two things that just are seeming impossible. One to retain the whisps of hair blowing in the wind and 2, to get rid of the green spill on the edges.  I've tried the 3 Pass Method, which he does not very cleary explain,and I cant get the edge matte that it is supposed to produce.  He leaves some of the important infomation written in the side notes, and other things are just plain confusing and he does not make clear reference to the examples on the DVd.
      Can anyone help me conquer this keying or at least point me in the direction so that I can learn this Step by CLEAR Step.
    Thanks.

    Hi there,
    The principle here is simple - it sounds as though the execution is what's tripping you up.
    First, let's get the principle straight. The whole reason to do this is to avoid using Keylight for anything but your edges in order to give them the subtlest possible threshold. This means breaking apart the image, and the most elementary way to do it is to start with three passes: a garbage matte to get rid of background noise/rig that doesn't cross the edges, a holdout matte to get rid of holes in the matte, and finally the edge pass. In more complicated shots it is necessary to break the image down further, for example doing one edge pass for hair and another for the body, etc.
    So you can start by just applying Keylight and creating your key.
    What I have you doing if that doesn't simply solve your key is to spread the resulting matte (using Simpler Choker with a negative value) so that it's well outside the edges to create the garbage matte. In the previous CS3 version of the book I instructed that you do this on a separate layer and use Stencil Alpha blending mode to apply the result to the layers below, one for the edge matte and one for the holdout matte. You can still do it that way if it's clearer.
    Otherwise, on a single layer the steps are
    1. apply Keylight, refine the matte and then leave the View menu set to Intermediate Result - that's important, it insures no color shift
    2. spread the matte with Simple Choker, set to a negative value (usually in the low double-digits)
    3. apply Keylight again to get your edge matte
    And after that, if there are holes in the matte, fix them by masking out a separate layer of the same source, below all of the others.
    I hope that helps.
    Mark Christiansen
    Author, After Effects Studio Techniques

  • Nokia N8 Breathing Light Not Working PR1.1

    Many of my co-N8ers on a forum said that after updating to PR1.1 (013.016) the breathing light is not working anymore even though it is turned ON in the settings. When I tried it on my N8, I can confirm that it is not wotking!
    Can anyone try and confirm this one?
    Solved!
    Go to Solution.

    @kichIf it is the same error as my N8, then I'm afraid it's a hardware failure. The notification LED has been missing for almost a year on mine. I just finished the spring cleanup, starting with a 3-button (very) hard reset and loading the latest Belle Refresh with the Nokia Software Recovery Tool. This made no change to the LED's.
    Symptoms:
    * Breathing light not working
    * Notification light for SMS and missed calls not working
    * Charge indicator LED not working during charge - but it blinks 5 times when the shut down phone is connected to a charger
    A diagnostics software list the error as: ST_LED_CONTROLLER_TEST No Minor  [ 10 ]
    The phone is otherwise healthy and stable so I don't worry too much about the missing LED's.
    If it must develop an error while it gets older, this is not so bad...
    Hans

  • Media key light

    Is there any way to light the media key on a 5230 like on a 5800??
    IF YOU FIND POSTS HELPFUL HIT THE BIG GREEN BOX TO THE LEFT WITH THE WHITE STAR IN IT THANKS

    This is the first time I've seen that on these forums.
    In any event, all you can do is take the phone in to your nearest Nokia Care Point. The 5800XM has been on the market for less than a year so, barring a warranty-voiding event, the repair should be covered by your warranty (24 months in the E.U. or 12 months elsewhere).
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Known Issue in Nokia Lumia 720 - Virtual keys stop...

    Hi Nokia lumia 720 bottom virtual keys stops working after some time.............. only solution is to replace screen which costs 7000....     Is there any permanent solution? pls help

    Did you try any troubleshooting steps ?
    1.Simple Reboot
    2. Soft Reset : Press and hold Power + Volume(down) keys until the phone vibrates (about 8-10 seconds). - All data will remain intact
    3. Factory Reset : settings-->about-->reset your phone - Data will be erased and phone will need re-setup from start
    4. Nokia Software Recovery Tool - Data will be erased and phone will need re-setup from start.
    If nothing from the above solves it, it's an Hardware issue that needs to be attended by Nokia care technician... which may lead to a spares replacement.

Maybe you are looking for

  • Statement.setFetchSize is not working properly

    I am using setFetchSize to limit the rows returned by query. Here is Code without using setFetchSize - Statement stmt = dao.createStatement(); ResultSet rset = stmt.executeQuery("SELECT * FROM temp");  while(rset.next ()) System.out.println( rset.get

  • IDoc to JDBC scenario strange bahaviour

    Hi Experts, My Scenario is IDoc to JDBC, I am creating some vendor masters in ECC, CREMAS IDoc sent to PI, mapping everything executed perfectly but data not posted in to data base, it is taking min 20 mnts to post data. When I monitor communication

  • Pricing Not updated after PO Change with BAPI_PO_CHANGE

    Hi Experts, I have used BAPI_PO_CHANGE to delete a existing service line in PO and then insert a new service line. But PO item net price is not getting changed though new service line with different gross price is inserted. I  have even tried to chan

  • Do I need to keep all my music and photos on my pc after I sync them?

    It appears I must first load all music and photos onto my pc, then sync them to my iPad or iPod. Ok. Now I have all this data in 2 places..the pc and the target device, which is a gross waste of pc space. Can I delete all these things from my pc afte

  • Delete a contact Permanently from Samsung SIII

    HI..my first smart phone.. Love it.. How do I delete a contact Permanently from my Samsung Galaxy SIII? I see I can HIDE them... But what happened was a bunch came over from I believe facebook of folks who I do Not know. But are probably connected to