Nokia Launch Application has stopped working...
Hi,
I've just carried out a fresh install of Vista 32-bit and installed Nokia PC Suite (version 6.85.12.0) and I now get the following error after a few seconds, even if I'm not trying to run any of the apps:
Nokia Launch Application has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
The version I had before the re-installation worked perfectly.
Is it possible to find that version again?
Thanks,
I would try to manually (through control panel I mean, no registry hacking) uninstall 6.84, connectivity solution and USB driver, then boot PC and then install 6.85 on a clear computer, if this problem, repair 6.85 through control panel and then decide whether to go back to 6.84
Similar Messages
-
Satellite L500D-144 - CCC Host Application has stopped working
Ladies and Gentlemen,
my PSLT6E-007004GR is almost a year old.
Earlier this month there was an update - possibly from Microsoft - and since then popt always at startup in Windows 7 this window and look for solutions:
Catalyst Control Center. Host Application has stopped working, it is searched for a solution.
A new installation of the graphics card driver and Catalyst Control Center did not change. Instead, a standard graphics card driver from Microsoft is installed.
Resetting the system to the month of October also brought nothing, for after fresh updates, the problem occurs again.
So it is reproducible.
Have already reported more customers or am I the first?
What can you do to the problem?
Sincerely,
CBluebaerchenHello
> Resetting the system to the month of October also brought nothing, for after fresh updates, the problem occurs again.
Do you get this display driver update from Windows Update?
If yes restore the system to an earlier point and disable this display driver update and choose only the important updates from Windows. Thats enough.
Otherwise you could try to run CCleaner. It can clean and fix registry problems. -
Satellite L300- 1AQ - Bluetooth tray application has stopped working
When i put my laptop on it comes up with an error which says:
*bluetooth tray application has stopped working*
A problem caused the problem to stop working correctly.
Windows will close the program and notify you if a solution is available.
Anyone got a solution?
The laptop is a Satellite L300- 1AQ
Only had it a month!!
Please help, thankyou
xxHi
Did you try to reinstall the Toshiba BT stack?
Usually this should help to get rid of this error message.
Here you can download the newest BT stack:
http://aps2.toshiba-tro.de/bluetooth/
Remove firstly the old BT software from the system and after new reboot install the BT downloaded from the Toshiba BT page.
Bye -
Print driver host for 32 bit applications has stopped working
I just bought a Hp ENVY 7640 printer. I cannot use the wireless printing on my 64 bit computer, with Windows 7. I get an error message "print driver host for 32 bit applications has stopped working". I have looked into all of your online support solutions and nothing I have tried has fixed the problem.
Was there any resolution to this issue? We have a user with the same issue. The details of the error are:
Problem signature:
Problem Event Name: APPCRASH
Application Name: splwow64.exe
Application Version: 6.1.7601.17777
Application Timestamp: 4f35fbfe
Fault Module Name: mxdwdrv.dll
Fault Module Version: 0.3.7601.17514
Fault Module Timestamp: 4ce7c883
Exception Code: c0000005
Exception Offset: 000000000004e891
OS Version: 6.1.7601.2.1.0.18.10
Locale ID: 1033
Additional Information 1: 0f86
Additional Information 2: 0f86ddcc0aa605af31ef1b7f5abedf57
Additional Information 3: 539e
Additional Information 4: 539e0f43d86d39f144fdb012e341ed8d -
I'm trying to reinstall the Palm software because synchronization has been failing for the past two months. It get to the point of synchronizing the calendar and fails with the message that there are too many events. Hence, nothing in the process after that synchronizes. I've tried reinstalling the Palm s/w to no avail. Now I'm trying to uninstall and reinstall the Palm s/w only to be greeted with another error message when the system restarts (as part of the installation process). The error is, "The application failed to initialize properly (0xc0000142). Click OK to terminate the application." When I choose OK, I get the error, "DeviceMonitor MFC Application has stopped working." Windows does not notify me of a solution. Any ideas/solutions would be greatly appreciated!
Thanks,
Gina
Post relates to: Tungsten E2Hello and thank you for using the Palm Help Forums!
You may need to do a clean uninstall of the Palm desktop software to resolve your issue.
Uninstall Palm Desktop by going to your Control Panel > Add/ Remove Programs > Remove Palm and/ or PalmOne
Delete the following folders:
C:\Palm
C:\Program Files\Palm
C:\Program Files\PalmOne
C:\Program Files\Handspring
From the Windows start menu, select Run.
Type Regedit and click Run or OK
*NOTE* BE VERY CAREFUL IN YOUR REGISTRY KEY EDITOR. IF THE WRONG THING IS DELETED THIS CAN CAUSE SERIOUS DAMAGE TO YOUR COMPUTER'S OPERATING SYSTEM.
Delete the following keys:
HKEY_Current_User\Software\PalmDesktopAutorun
HKEY_Current_User\Software\Palm
HKEY_Current_User\Software\Palmone
HKEY_Current_User\Software\U.S Robotics-- (check and make sure only palm related keys are under this one)
Delete this key as well:
HKEY_Local_Machine\Software\PalmSource
Close the Registry window
Restart PC upgrade to new palm desktop (by going to www.palm.com).
Post relates to: Treo 800w (Sprint)
Post relates to: Treo 800w (Sprint) -
Hp Elitebook 8530P quick launch buttons has stopped working
HP Elite book 8530 shows quick launch buttons has stopped working, Catalyst Control Centre : monitoring Programe stopped Working,
HP Health Service : Stopped Working
There is no solution in Windows Vista FormsHi,
nalla_jeya wrote:
HP Elite book 8530 shows quick launch buttons has stopped working, Catalyst Control Centre : monitoring Programe stopped Working,
HP Health Service : Stopped Working
There is no solution in Windows Vista Forms
Go to Control panel, software and verify that the programs are installed. Now uninstall them. After you have done that you can reinstall them from the HP Backup and Recovery manager. You can either do it from an F10 key during the startup of your laptop or from the HP Recovery CD set that you (should) have made.
See this HP web support document for information on how to restore the software.
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Cannot use BD DVD Player: WIN DVD MFC application has stopped working
Tried to install my old version of WinDVD and failed and in the process may have accidentally deleted a file,
for now whenever I try and use BD DVD Player I get the following message:
'WIN DVD MFC application has stopped working '
I tried using restore point but still get it, can anyone advise please?It will be interesting to know which notebook model do you have.
Anyway, in my opinion there is some software conflict. I can imagine both players use same modules or plug-ins and there is conflict.
I dont know what solution can be but maybe you should remove both players, restart your notebook and make clean BD player in hope it will works properly. -
Hpqwa_ui mfc application has stopped working
Error message HPQWA_UI MFC application has stopped working. My wireless won't connect to this laptop but connects fine to other devices in the house. I tried a system restore but it said it could not do this properly. I tried resetting router, no change. I tried Norton scan and eraser but it says it cannot fix internet connection. I am a novice so of any one has any ideas they would be appreciated. Thanks
It will be interesting to know which notebook model do you have.
Anyway, in my opinion there is some software conflict. I can imagine both players use same modules or plug-ins and there is conflict.
I dont know what solution can be but maybe you should remove both players, restart your notebook and make clean BD player in hope it will works properly. -
NVIDIA CONTROL PANEL APPLICATION HAS STOPPED WORKING
I have got a big problem here with NVIDIA cards and have not been luck at all. My problem started when I had a clean install of Vista 32 on my HP XW6600 which came with Windows XP installed with an option to upgrade to Vista. When I upgraded I also upgraded my GPU from GT 9500 to Quadro FX1700. When I tried to open the control panel all I got was an error message saying it has stopped working. I never had this problem in XP with the 9500GT.
I later sold the quadro and purchased the Geforce GTX260 and had a clean install of Vista 64 on my system. But still this nvidia control panel cannot be opened. I am a professional video editor and needs the advantage of two monitors when running Adobe Premiere PRO CS4. I have seen some forums which says uninstall all nvidia drivers, use CC cleaner or Drivesweeper, in safe mode and reload the Nvidia drivers once again. but all this have failed.
My patience is running out now and I am now considering switching to ATI cards. I wanted to take full advantage of cuda with nvidia and was looking foward to purchase a quadro 5600 for maximum added perfomance. I have just ordered a second monitor from DABS.COM which I intend to hook up with my system and without accessing the Nvidia control Panel I will be in trouble.
Am I missing something here. PLEASE tell me know if you have got an idea on how to resolve this. I have attached a screenshot of the error message I get.
System
HP XW6600 Vista 64
Quad Xeon 5420 2.5ghz
250 GB C drive
750 GB D drive
1.5 TB Raid 1
GTX 260
4GB RAM
ADOBE CS4 Production Premium"It has to be that HP thing"
Bill what is this HP thing. Could you expand on that please because I have just completed a clean install using HP RESTORE plus disc and my drive was completely wiped out. Not even Windows OLD files were left.
I then installed the drivers using the Original CD that came with the GPU, still the problem remains. I updated the driver using the internet and it didn't help neither. I have also purchased an Intensity PRO editing card and expecting a 22" HD monitor thhis morning for HD editing.
I think ATI is the way forwad. Which is the best ATI card for HD editing. Budget maximum GBP£150.
YOUR HELP WILL BE GREATLY APPRECIATED. -
APPLICATION HAS STOPPED WORKING
Our team has developed a composite WPF application, MVVM architecture, targeting Framework 4.0, VS2012, VB.NET. We are using the Prism library. I have created an InstallShield Limited Edition Setup and Deployment Project for Windows install.
For test I’ve limited the install to target a Win7 64 OS. I have all the prerequisites covered. The application works perfectly in development and when launched by double-clicking the .exe in the bin folder. The setup installs the app in the programs directory
without error.
When the application is launched from the Start menu, the Window is displayed and after about 5 seconds I get the familiar ‘STOPPED WORKING’ dialog. Tried on development machine and VMware setup. Same result.
I’ve analyzed the memory dump and the dump created by ProcDump with the WinDbg tool and I’ve learned the issue is in the KERNALBASE!RaiseException procedure. Here is the full result:
0:000> .ecxrrax=000000007fa1c169 rbx=000000000012b2e8 rcx=000000000012ab80
rdx=0000000000000118 rsi=0000000000000001 rdi=0000000000000005
rip=000007fefda5940d rsp=000000000012b190 rbp=0000000003036568
r8=0000000000000000
r9=0000000000000000 r10=0000000000000000
r11=000000000012b1d0 r12=0000000000004000 r13=0000000002874ce0
r14=00000000e0434352 r15=0000000002874a98
iopl=0
nv up ei pl nz na po nc
cs=0033
ss=002b ds=002b es=002b
fs=0053 gs=002b
efl=00000206
KERNELBASE!RaiseException+0x3d:
000007fe`fda5940d 4881c4c8000000
add rsp,0C8h
Verbose mode ON.
There is plenty of chatter on KERNALBASE but nothing seems applicable here. Are there any ideas?Hi ChuckMM,
It seems that it is not the correct forum for this issue.
I might not have the correct detailed answer you need, but I might lead you into the right direction to solve your problem.
To make sure that whether it is the setup file issue, since it is related to the InstallShield, you could post this issue to this forum:
http://community.flexerasoftware.com/forumdisplay.php?133-InstallShield
In addition, since you debug the dump file with WinDbg tool, if you really want to analyze it, you could post this issue to the windows debugger forum:
https://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/home?forum=windbg
Have a nice weekend,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Nokia Lumia 800 has stopped working
Hello,
My Nokia Lumia 800 has just stopped working - I checked it during the day to reply to messages and it was working fine, and then when checking it about an hour later it would not respond to anything.
When I got home I tried charging it (it didn't have low battery when I was out so I don't think it turned off because of that). Then I tried taking the SIM out and putting it back in, tried the 'soft reset', the 'hard reset' and then plugged it into my laptop, all of which did nothing.
I'm just not sure what to do next really, any advice would be much appreciated!
Thank you,
ZaraHi, ZaraFrizell. When you tried charging the phone, does it show any battery indicator? Are these the troubleshooting steps you've done so far: Nokia Lumia 800 - Troubleshooter? Note that the link is intended for the US, but you may search it on your local page. In case that the issue still remains, best to have it checked by our authorized technicians. Taking your phone for repair will delete all the personal files saved on it. Check this: http://www.microsoft.com/en/mobile/locale/ to find your local repair options.
Keep us posted. -
Nokia Ovi Player has stopped working
Everytime I try to open Nokia Ovi Player a message comes up saying 'a problem caused the program to stop working correctly, Windows will close the program and notify you if there is a solution available'. I've uninstalled and then reinstalled the program and followed advice I saw on another discussion page to delete something through my local disc/program data/nokia - can't remember the name of the file I deleted but it didn't make any difference. I'm using windows vista. Does anyone know how I can fix this problem?
Thanks
Message Edited by sash1785 on 23-Jan-2010 09:02 PMHi,
Another update, i randomly got a phone call from nokia a few nights back....(i had given up after my last conversation) and they fixed it. Basicly uninstall all the nokia bits via your control panel or whatever methods depending on your version of windows. This though actually does not uninstall everything, go to you programs folder in the c drive and search and delete any nokia bits you see remaining. Then go to users, select your user and any others using the player, again serching through this folder you will find more little bits of nokia files hiding away delete all of these. Alternatively just run a search for nokia on your c drive and this should bring them all up. let me know if you need the exact location of the files i am on my work pc at the moment and cant access my laptop to write it here correctly and honeslty cant remember off of the top of my head.
Next re-start your pc, then log onto the internet and search for nokia music.com, do not go to the uk site or any other country ones (i am in the uk and this is what i was perviously doing) apparanlty the .com version is different in some way, not sure why but its works so i am not going to argue. So its really important to only go to the .com site. download it, re-start your pc again. Then after a very very very slow initial start it should open, for the first day i had trouble getting into the shop its self, the best way is to use the little sign in option on the screen rather than going to your contries shop.
The first day it would not let me log in but the program did open, day 2 it let me log in and use it fully, day 3 working fine, day four... well thats today so i dont know yet but fingers crossed.
Hope that helps a bit, like i said if you need a more detailed explanation just post a reply and i'll be happy to do that as i know how frustrating it is. -
Nokia Ovi Suite has stopped working
I have install Nokia ovi suite in my pc
but when i try to stat it
it show me this error
a problem caused the program to stop working correctly. windows will close the program and notify you is a solution a valiable
please help meUninstall Ovi suite; Clean windows Registry (CCleaner). Restart PC, Download and install latest Ovi Suite .
And make sure there is no Virus, Spyware, Use a reliable Antivirus Program. Like; Avaira.
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4 -
Cisco secure desktop hostscan launch utility has stopped working
Hi Experts
Can any one help me on the below issue while I am trying to access.Hello
as much as I regret it and as strange as it may seem I fear it's a challenge for Adobe's Creative Cloud Cleaner Tool.
Sometimes - for whatever reasons - CC doesn't "want" to work. In this case you should CC completely delete and reinstall by help of Adobe Creative Cloud Cleaner Tool. (A try to uninstall by own resources is not enough!)
I quote: ... helps resolve installation problems for Adobe Creative Cloud and Adobe Creative Suite (CS3-CS6) applications. The tool removes installation records for prerelease installations of Creative Cloud or Creative Suite applications. It does not affect existing installations of previous versions of Creative Cloud or Creative Suite applications.
Please use: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html and follow the prescribed sequence of operations
Sometimes the "opm.db file" is the culprit. In this case you should delete it.
If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences.
Good luck!
Hans-Günter -
THE click on feature to sign on log out of certain applications has stopped working for me
my arrow for clicking on LOGON LOG OFF and sign in and sign out isnt working on certain appliciations this just started with my last Foxfire Update Please HELP
That problem is caused by the Yahoo! Toolbar that extents too much downwards and covers the top part of the browser window and thus makes links in that part of the screen not clickable.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Maybe you are looking for
-
My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8. I ha
-
Hi all Can one business partner be both a key user and a message processor? All help appreciated. Judy
-
Album art problems!!
I just got two CDs - Todd Agnew's grace like rain and Casting Crown's Until the Whole World Hears. I downloaded the Cd's onto my computer, and it worked fine. Then i tried to get the album art. No album art came up. That happens with some CD's, so I'
-
Question regarding homepage framework...
Hi guys... My brain just died on me and I failed trying to achieve the following: Given: 1. Workset with lots of fancy Portal objects 2. Page_A 3. Page_B 4. Workset_A consisting of deltalinked (2), deltalinked to (1) 5. Portal Role A, consisting of d
-
this document seems to know my exact problem.. "iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date" .. so i was following exactly what it said and everything was good until i got up to Universal