Nokia Lumia 1320 random restarts after Denim updat...

Dear Microsoft / Nokia,
I am writing this forum post because my nokia lumia 1320 is suffering some problems. Since the update, the phone is restarting itselve randomly.Today, the phone restarted itselve 3 times already, which was the provocation to send you this message. 
I think it is a problem resulting from the recent Lumia denim update, before the lumia was significantly more stable.
The phone was factory resetted after the lumia denim update (1 week ago), and today i also performed a soft reset, without any results. (still random restarts).
Furthermore i noticed that sometimes the phone is unresponsive when i push the powerbutton, to unlock the phone.
My phone is on 8.10.14219.341, firmware: 3058.50000.1424.0001 (it is the Country variant from the Netherlands).
Hopefully there is a way to fix this problem,
Thank you in advance,
Wouter van Buul
Ps. I am not sure if this is the right place to report bugs?!

This is a user to user forum where we try to help each other, so reporting bugs is not the purpose of this community, that should be done direct to your local Microsoft Mobile support. However your problem is not a bug, just a technical issue with your handset and we can try to help.
Have you checked that all your system apps are up to date after the Denim update ? The easiest way to do that is from settings > applications > store > check for updates. If everything is up to date, I would do the following troubleshooting if I had this problem:
1.Remove the microSD memory card temporarily and monitor whether the reboots continue
2. Get a new replacement SIM from your network
3. If none of the above works, the next step would be a hard reset (settings > about > reset my phone), but since you say you have already done it, you can try a complete full reinstall of your firmware using the Software Recovery Tool. Please note this will completely wipe you phone, so a backup is highly recommended.

Similar Messages

  • Random restarts after Black update Lumia 820

    Hi, I have a problem. I had GDR3 developer version without Black, everything was ok, but after Black update, my phone is randomly restarting. I still have the same apps asi without Black. I made hard reset, but nothing, I made hard reset without restoration of my previous data, and it is still restarting. I made software flash over nokia software updater for retail but it is still randomly restarting.
    Tell me what to do, because it makes me angry and I'm planning to sell and never buy Nokia Lumia phone again!

    I have sam issue on Lumia 720, i never had random restart before gdr3+Black, i did not dev unlocked my phone i did officiall ota. Also i get 8bit color, stuck screen more often now. Soft and hard reset don't help. And i hate to see Nokia don't answer ur question yet. 

  • Nokia Lumia 930 - random restarts - comes back eve...

    Hi,
    My Nokia Lumia 930 has a problem with random restarts, the problem occurs randomly, and I can go for a few days without restarts, and then suddently it will restart several times within an hour.
    I have tried to reboot the phone, and I have reset it to default several times, but the problem returns.
    Software is:
    Lumia Denim
    Firmware Update Notifier 1.2.12.1
    Glance PinBoards App Agent 1.3.1.7
    Lumia First Use Experience 1.11.2.1
    Lumia Share 2.5.1.0
    Rate Us 2.8.0.0
    Silent Installer 1.6.0.6
    SIM Unlock 1.0.0.5
    SMS vCard Receiver 1.2.1.7
    SpamFilter 1.9.3.1
    Ram: 2 GB
    Manufacturer Name: RM-1045_1006
    Mobile Operator: 000-33
    Configuration Id: 1006.01B8E5
    Core Build ID: 9031.16 (02540.00019.15053.26000)
    IMEI-SV: ...................................
    BSP Release: 2540.0019
    Active Customer Configuration: 11841
    Master Configuration Label: 14w51_1
    Preloaded Content Label: 14w51_1
    Application Version: 3.14.7.4
    Build Creation Date: 02-02-2015
    Model: RM-1045
    OS Version: 8.10.14234.375
    Firmware Version: 02540.00019.15053.26004
    Hardware Version: 2.0.0.0
    Radiosoftware Version: 201c110.00039.0001
    Chip-SOC version: 8974
    Is it possible to extract som logs, to analyze what is going on?
    I have had 2-3 restarts today, and the same yesterday.
    I intendedly did not reset to default, as it is a long process and not a fun thing to do every second month - please if anyone can help to solve this problem, I really hope, because I would like to keep Windows Phone, but if this is not resolved, I will find something else (My previous Lumia 920 had the same problem).
    I can live with the short battery life so far, but the restarting problem is a huge problem for me.
    Best Regards,
    Brian

    The remaining DIY option for you is to try the Windows Phone Recovery Tool. That will completely wipe your phone and perform a clean install of the firmware, so you need to back up beforehand. Failing that, the next step would be submitting the handset to a Nokia Care facility to be checked / repaired. AFAIK there are no consumer tools available to extract logs from the handset.

  • Nokia 3250 won't restart after software update

    I did what the Installation and upgrading instructions told me to do, but after finishing the update (everything went fine), my phone stops with the Nokia starting-up screen and then appears the so called White Screen of Death.
    I want to fix this ASAP, what is the next step?
    How long will take the fix if I have to leave my phone on the Nokia Service Care? Is it a matter of a few minutes or it will take a couple of days?
    My warranty is valid (one month old).
    Best wishes,
    Jon
    Mexico City
    EDIT: Removed email addressMessage Edited by ajak on 15-Jan-2007
    03:11 PM

    Hello Nikki and Welcome to Apple Discussions ...
    Try Safe Mode: http://support.apple.com/kb/HT1455?viewlocale=en_US
    No luck there, run Disk Utility from the Applications/Utilities folder. Launch DU, select MacintoshHD 10.x.x in the panel on the left, select the FirstAid tab then click Verify. If DU reports, then you're going to need her restore disks. The DU app on her drive can check for errors, but it can't repair them, ergot the restore disks. It might say Volume Needs Repair...
    If you can use another Mac that is compatible, you could use Target Disk Mode to access her files.
    Transferring files between two computers using FireWire.
    To transfer files using FireWire:
    1. Shut down the first computer and leave the second computer on.
    2. Connect the two computers using a 6-pin to 6-pin FireWire cable. (If both computers have higher-speed FireWire 800 ports in addition to the standard FireWire 400 ports, you can use a 9-pin to 9-pin cable with the FireWire 800 ports to transfer data at higher speeds.)
    3. Open System Preferences, click the Startup Disk, and click Target Disk Mode. (Or, start up the first computer while holding down the T key.)
    4. A disk icon for the first computer appears on the desktop on the second computer. Drag files to and from the disk to transfer them.
    5. When you finish, eject the first computer's disk by dragging its icon to the Trash. (While you drag, the Trash icon changes to an Eject icon.)
    6. Push the power button on the first computer to shut it down and disconnect the FireWire cable.
    And more info on Target Disk Mode here: http://support.apple.com/kb/HT1661
    Carolyn

  • Nokia Lumia 928 apparently died after an attempted Windows 8.1 update.  Replacement phone arrived the next day.  How can I restore my contacts, photos, etc.?  Backup assistant is no help and I don't know how to access the Cloud.

    Nokia Lumia 928 apparently died after an attempted Windows 8.1 update.  Replacement phone arrived the next day.  How can I restore my contacts, photos, etc.?  Backup assistant is no help and I don't know how to access the Cloud.

    Did you have the phone set to backup things to the One Drive on Microsoft servers?

  • I was updating my ipod touch to iso 6.1 ans when it restarted after the update it froze and i held the lock button and home button down to restart it and it goes to random colour screens

    I was updating my ipod touch  to iso 6.1 (i think) and when my ipod restarted after the update it froze on the loading bar so i held the lock and home buttons down to restart my ipod it showed the apple logo for a few seconds then the screen went random colours.  I tried to let the battery drain  then plug it into the computer but it doesen't recognize it when i connect it.
    Please help!!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Random restarts after updating to 1.1.1

    Hi there,
    I have applied the new update and have started experiencing random restarts. The update went just fine with no errors.
    In fact it just restarted now after looking through the various setup options. I have completely restarted the phone.
    Thanks
    Nick Shanny

    From the number of posts regarding the same issue with 1.2 and any ipod with a color display (both my ipod nano and video ipod crapped out), there is obviously a serious bug with this "upgrade."
    I agree we should give them a chance, but I find it unacceptable that after this amount of time that the Applecare support technicians, up to TIER 3, have never even heard of this issue. They wanted me to return my ipod(s) in for factory service even after I numerously reminded them that they both work perfectly once downgrading to 1.1.1!
    I am a long-time apple-geek, but this issue upsets me because it is so uncharacteristic of the standards of excellence Apple has always provided, and smacks of the pervasive frustration we all deal with when using Microsoft products.
    ......and it is especially frustrating that all of the purchases I excitedly bought once videos are now provided at 640x480 resolution are not playable with version 1.1.
    But with version 1.2, the higher resoultion videos are transferable to the ipod, but no videos are playable due to this firmware incompatibilty.
    Apple: do you read these discussion forums??

  • Nokia lumia 1320 off and continuously vibrating.

    I bought Nokia lumia 1320, 5 days back. On 3rd day when I took phone, I saw it was contineously vibrating. I tried to unlock but no responce. It keeps vibrating. That is like off and vibrating. I did a soft reset by pressing volume down and power button. It restarted and worked fine. After one day same problem again happened. I again soft reset it. Today also it happened. Is this a hardware problem or software ? Anybody else facing the issue ? Any solution ?

    I contacted shop and they agreed to replace my mobile. But I think the issue was when I used IM+ and Skype and when I get messages. When we close thses apps and we get messages as push notifications. I think not all but some of these push notifications are causing the issue. I don't know if this is present with all windows os.

  • Nokia Lumia 1320 does not recognize media files properly

    Hello
    I have the following problem with my Nokia Lumia 1320:
    media files (either music or video) are not recognized properly and therefore seen in "other" section of Storage.
    There has been a discussion here a while ago here:
    https://social.msdn.microsoft.com/Forums/en-US/042cc9fb-ea9e-444c-98f0-8c1d0930e326/sd-card-problem-with-my-nokia-lumia-1320-unable-to-use-it-properly?forum=winphoneosissues
    But my problem is in fact that media files are not recognized even on the phone itself which is very surprising.
    I have tried several ways to copy the files over:
    - Win Explorer on Win XP
    - Win Explorer on Win 8
    - special app on Win 8
    with the same result.
    Moreover, sometimes the files are not read by the official Music app with the following odd errors:
    - 80070002
    - 80070003
    Even more problems occur with the SD Card:
    some files fail to be transferred there and disappear after the phone restart. I have tried the ways above to copy these files with no luck.
    I have also tried both hard and soft phone reset, formatted SD Card via phone and PCs.
    The problems described still persist.
    Does anyone have ideas/ways to fix those problems?
    The phone is really nice but it's pretty annoying to meet these problems.
    Interestingly, my previous WPs (HTC 7 Trophy and HTC 8X) didn't have a half of the problems described above. Bad luck...
    Details of my phone are:
    - Nokia Lumia 1320
    - OS: 8.10.12393.890
    - Region Set: United Kingdom

    We have moved our support forum for OS Consumer Support, i.e. almost any support of the Preview for Developer release that is not related to developing an application, to the Microsoft Community website here: http://answers.microsoft.com/en-us/winphone/forum/wpdp
    Eric Fleck, Windows Store and Windows Phone Developer Support. If you would like to provide feedback or suggestions for future improvements to the Windows Phone SDK please go to http://wpdev.uservoice.com/ where you can post your suggestions and/or cast
    your votes for existing suggestions.

  • Nokia Lumia 1320 Wifi error Could Not Connect To T...

    Hi,
    I'm having trouble with my phone connecting with my Wifi router model Netgear WNAP210 Router, when I type the password in it says either that it is unable to connect or sometimes that the password is incorrect!!
    I have contacted Netgear and they suggested changing the router name to remove any underscore symbols "_", I did this today but still get this annoying message on the phone.
    I've tried deleting found connections and starting from scratch and have also amended the router name (which shows correctly when scanning for Wifi on the Nokia). Now it's starting to get me really wound up....please please help?
    Thanks,
    Adam.
    Solved!
    Go to Solution.

    Hi, AdamTh. Make sure that your phone's software and system apps are updated. You should see 'Lumia Cyan' under Settings> extras+info to confirm that you have the latest software update. For your system apps, go here: http://discussions.nokia.com/t5/Pool-of-Knowledge/Nokia-Windows-Phone-8-App-Updates/td-p/1640082. After checking that, you can visit this link: Nokia Lumia 1320 - Troubleshooter and try the workarounds listed. The link is intended for the US. Keep us posted. By the way, welcome to our forum. 

  • Nokia Lumia 1320 data coonection problem!

    since update to 8.1 i can't use data connection on phone, but internet sharing works.
    so APN works
    no problems with calls, wifi, just data connection on phone!
    I do not want hard reset!!!
    Nokia Lumia 1320
    OS v.: 8.10.12393.890
    firm.: 3058.50000.1424.0003
    radio: 3.2.28072.7
    montenegro t-mobile

    Hi Stuportuguese,
    As I know, this problem is not related to development issue. I would recommend you post new thread on community forum for effective response.
    http://answers.microsoft.com/en-us/winphone.
    Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
    the survey.

  • Unable to restart after software update 10.3.1.1779

    I am unable to get  my Z10 to restart after this update.
    I have searched endless avenues and have now resorted to deleteing the notifcations for this update when they come in, I have downloaded and installed it, but when asked to restart, my phone stalls on the loading screen forever, the longest I have waited for it to restart is 3 days, with 24 hours of that on 99%.
    I am now the but of all phone related jokes as everyone I know has an IPHONE that works perfectly, but I insist on keeping this awful Z10 becuse I dont want to join their rank....too tink I spent £500 on this when it came out (more fool me)
    It would seem that the general consensus is, I will have to go to the inconveience of taking my Z10 in to a phone shop, were they will send it off to BB for the update to be installed.
    PS; Blacberry's forum is as hard to navigate as the phone is to actually get working proberly.

    This has been the worst software update I have ever encountered. My Q10 is completely unreliable and I am going to switch to another device in the morning. I have restored factory settings and have successfully wiped the app to sync my shared Google Calendars, the z and y keys have swapped on my keypad and the Q10 still turns itself off arbitrarily, wipes all text and phone messages and can't recall what network I'm on or what my home wifi settings are.

  • MAC Mini does not restart after Yosemite update

    I bought my MAC mini in 2011 and I successfully updated to Mavericks with no problems.  I am not sure why my MAC Mini will not restart after I updated to Yosemite. The completion bar gets stuck around 30%.
    Any help or ideas appreciated 
    Larry

    Okay, this is strange.  I tried restarting three times yesterday with the same results. In fact I left it go overnight only to find the next morning that the bar was still stuck at 30%.  I did a hard boot a little bit ago and waited a few seconds. I restarted an it booted up fine.
    Larry

  • Is it still recommended to do a restart after and update?

    Hello.  Just did an Apple update to my iMac.  Is it recommended to to a restart after the update has downloaded?  By the sounds of the prompt afterwards "The update was done successfully" or something like that, sounds like it is not.  Thanks for any input on this.  Cheers.

    Some updates require a restart while others allow you to continue to use the computer while the update is in progress.  The "Update" window will tell you whether or not you have to restart and it will restart when the update is completed.  Just follow the instructions.

  • Nokia Lumia 1320 RM-994 Headset Issue

    Hi Support ,
    I recently brought new Nokia Lumia 1320 and i am disappointed with the Earphones got in the box it is WH-108 which has no button and no chance of call answering and no Music track changing .
    I also have WH-208 Headset which i got for Nokia Lumia 1520 , Trying on My  Lumia 1320 and no Luck .
    Is their any alternate Wired headset supports to Nokia Lumia 1320 ?.
    Kindly suggest me for purchasing to fill my regular use of my Lumia 1320 on calls & Music.
    Thanks
    Santosh gadale

    Hi, Santosh_Gadale. Why not try Nokia Purity Stereo Headset (WH-920)?
    http://www.nokia.com/global/products/accessory/wh-920/#1985078
    Hope this helps.

Maybe you are looking for

  • ASA 5505 with Backup ISP

    I am working with a client that currently has an ASA 5505 with two ISPs for failover using a tracked interface.  I would like to configure logging so that the ASA will email us when the Primary ISP goes down and fails over to the backup.  Here is wha

  • How do I make my printer quit after printing

    My Epson Artisan 725 used to print and then quit (all previous versions of OSX). Now with 10.8, it prints and stays in the dock, it does not quit like I would it prefer. Any help is appreciated. Thanks.

  • Nerving Problem with UTF-8 and ISO-8859-1

    Hi, I´m looking for a solution to serve this problem for many hours now, maybe someone can help me: 1.) We need to send our Mails with the ISO-8859-1-Charset because otherwise Windows-Users get the text in the message twice: once as plain, and after

  • [SOLVED] How to install from AUR?

    Ok, I know I'm posting too many questions too fast but I'm at the last step in configuring my videocard driver to install X and I'm stranded in the middle of nowhere, sorry for too much posting. I need to install a package from AUR but even I read th

  • XML problems with WM 5.0 emulator

    I have a FL 2.0 app that loads xml just fine. However, when I just tried it in the WM 5.0 320x240 emulator, it wouldn't load the xml, it gave an error, saying that the xml call was not associated with a key event or a mouse event. It's loaded through