Nokia n91 not working as it should
please can anyone tell why when l get songs sent to me by bluetooth. I can only get one song on n91 it keeps on saying the memory is full. Also any songs l download off the windows media player onto my phone, say the tracks are corrupted and they wont play. please help.
Don't use PC Suite to manage the contents of the N91.
Use File Transfer USB mass storage and the HDD will be added to your PC as an external drive.
Then you can drag and drop images, videos and Music.
Alternatively use Windows Media Player 10 or 11 to manage the Music of the N91. Use Music Transfer Protocol (or MTP) in the selection when you connect the USB cable.
Use PC suite to back up your PHONE memory ONLY!, this will save your contacts, sms, email and other PHONE contents including DRM rights to the pre-loaded contents.
USB mass storage is waay faster than PC Suite (OBEX) and much easier.
Also to disconnect or terminate a USB session use the STOP icon in the Windows tray to EJECT the drive properly or alternatively you can also use the RED (end) key on the N91 to disconnect the USB. Just pulling-out the USB cable may corrupt data!
Check the FAQ for N91 for more tips about managing your contents. Or send me a message.
640K Should be enough for everybody
El_Loco Nokia Video Blog
Similar Messages
-
Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?
Hello, Jdragone.
Thanks for the question. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H. -
Creative cloud photoshop blur tool not work as it should be
creative cloud photoshop blur tool not work as it should be !
I go to blur a painting i am doing and it does not blur enough and I am using wacom Intuos 5 med pen tablet.
and I even set the tablets sensitivty for pressure lower then default and still not getting the blur tool to do its job.
I even adjusted the brush settings too to be able to blur even more on hard settings, still nothing.
at least it not bluring enough to see any major changes.
the only way i can blur anything is by using the fliters blur or the brushes ( mixer brush ) settings to mix colors and do it that way.
(note) I will not post my systems specs sorry I don't do that and even the tech from adobe said I do not have to. and so I wont !
just need advise not to share system specs.
and thats what this forums board is for getting advice and read what others say about the issue at hand.
it's not to post or share system specs !!!
so with that out of the way I need advice only please ?Hi,
It might be your image is too big in terms of pixel dimensions for the blur tool to work well.
If you zoom to 100% do you see any change when using the blur tool?
What are the pixel dimensions of the image?
(Image>Image Size)
If you try a small image, does the blur tool work?
What about when you use the mouse instead of your tablet?
Can you at least tell us what operating system and version of photoshop your using? -
my pass book on my iphone 5 does not work like it should, it works just the same as it did on the iphone 4, i tryed the date an time trick like 5 times an still nothing. i tryed factory reset an nothing. i know it workds different on the iphone 5 then the 4. but i dont know what else to do.
Can you be more specific about what isn't working? Are you running iOS 6 or iOS 6.1?
Did you read the support page on Passbook? http://support.apple.com/kb/HT5483 -
siri is not working like it should i asked it to play songs and it just says sorry i cant do it any ideas y
Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius -
I have safari 5.1.7 and it's not working properly. Should I use Safari 5.1.9 or 6.0.4?
I have safari 5.1.7 and it's not working properly. Should I use Safari 5.1.9 or 6.0.4? Mac OS X 10.6.8. 17" MacBook Pro
Use your Software Update under the Apple menu, it SHOULD bring Safari up to 5.1.9 on OS X 10.6.8.
Apple IS issuing security and other updates for Snow Leopard users.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
Safari 6+ is only for 10.7+ users as OS X is morphing into iOS.
10.7 and 10.8 will not run your PPC based apps of 10.5/10.6
If Software Update is not working, then you have other issues, backup your users folders off the machine to a external storage drive (not TimeMachine!) and run through this list of fixes.
Most commonly used backup methods
..Step by Step to fix your Mac -
Acrobat Pro (V11.0.07) not working as it should
Acrobat Pro (V11.0.07) not working as it should (various aspects) - receive an error 2503/2502 when attempting to run a repair
Hi ferdinando,
Was Acrobat working fine for you before?
Which OS are you using?
Try repairing Acrobat from the Control panel> Programs and check.
Are you getting the error: "Error 2503 called RunScript when not marked in progress"
This is apparently a Windows issue (see http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/error-2503 -called-runscript-when-not-marked-in/76e72d98-cbef-432f-8f6f-40417d139bc1
Regards,
Rave -
I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.
What should I do?Hi Anto2211,
Please follow the thread: Black screen CC where this issue is already discussed and resolved.
Let me know for any further query.
Thanks,
Ratandeep Arora -
My MacBookPro is continuously buzzing, the backlights are not working although it should be on. Tried to cover the sensor, but it's not that. Also, it's telling me that I have no batteries and the charging is not working either.... Any help? PLEASE!!!!
Intel-based Macs: Resetting the System Management Controller (SMC)
-
My iPhone 5 is overheaded while charging and the screen is black and is not working. What should i do?
Sounds like a battery failure. Your phone is under warranty. Bring it back to Apple
-
HT4061 I dropped my phone in the toilet and now is not working. What should I do?
I dropped my phone in the toilet and now is not working. What should I do?
Put in in a bag of dry rice for a few days and see if that drys it out. Don't be surprised if it doesn't. You may need to take it to an Apple Store. They will offer you a replacement at a reduced price
Hope that helps -
Hi!
I remove by mistake the realtek audio device high definition audio bus. Now, the sound of my computer is not working. What should I do?first go to start-all programs- windows update is at the top of the list follow the prmpts to install microsoft update which is the new version of windows update if microsoft update is all ready installed go there and select custom then let it look for updates
then if it detects missing drivers it will install or guide you on what to do. If you have an r52 laptop then try this link.
http://support.lenovo.com/en_CA/downloads/detail.page?LegacyDocID=MIGR-58599 the best of luck.
2 if that doesnt work then try this open device manager right click on the sound device you may have to expand sound, video and game controlers on the tab that comes up select properties then select the drivers tab select update driver.
do it this way incase the driver installation failed the frist time it may not ask you to update again if you didnt uncheck the box that came up on frist try.
3.find a mother board disk and search the disk using explore for ac97 realtech driver. actually windows update should solve it also try there FIX IT web site there are many automatied fixes there for your use. -
I forgot my passcode and tried restoring my ipod touch, but it's not working. What should I do?
I forgot my passcode and tried restoring my ipod touch, but it's not working. What should I do?
Did you place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
The "alt, ctrl and shift" on the left side of my keyboard keys integrated notebook did not work. What should I do?
Hi Luis Fernando Garcia,
Thanks for using Apple Support Communities. This article has troubleshooting for keys not working on your keyboard:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Universal Access pane in System Preferences, click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Universal Access pane, click the Mouse tab, and make sureMouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, seeUnable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by Mac OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Cheers,
- Ari -
I can't send out email using my iPhone4. I tried to follow the step provided to solve but still not working. What should I do?
Contact your mail provider and get the CORRECT settings for the outgoing server to set up on your phone.
Maybe you are looking for
-
My problem is that I am working on a page and then I receive ....Error saving the journal. Perhaps your session has expired-try reloading the page". I used to receive from Firefox when reloading page...To display this page, Firefox must send informat
-
I use Microsoft PowerPoint and convert to PDFs with the Pro 9 trial version. Will Standard version do this also? Thanks
-
In 32bit system getting exception "Could not load file or assembly 'SIPEPS, Version=5.0.0.0' "
Hi All, We are developing a windows service for Lync user state change using UCMA 4.0. It works fine in 64 bit system but once we run the window service in 32 bit system we are getting the exception as below. Exception message: Could not load file
-
Quota Arrangement || Allocated Quantity
Hi All, I am currently dealing with two issues related to Quota Arrangement which are as follows: I have a product in APO on which inbound quota arrangement is set. The product is procured from a vendor and purchase requisitions are created on it. Th
-
Strange files adding themselves to folders in Bridge...
They all start with the following "aa" then they have another letter and 5 numbers. They vary in size and have no extension and I never noticed them till I installed CS4. Are they safe to delete?