Nokia n95 crashes while upgrading the software

When I was trying to install new software using nsu to my nokia n95. I noticed that the phone goes off and the nokia logo appeared (the light is off).
In a minute, the PC I was using told me that the phone has been disconnected. So, it asks me to turn the phone off, remove and replace the battery and turn the phone on again.
It happens again and again, about 4 times. The last time I tried that again, the phone won't turn back on.
It just has the nokia logo and nothing else happened. I tried the hard reset (green button things) but it still didn't work.
So, please help me.
thanks.

Go into your control panel, System > Hardware > Devices, look for the USB (Universal Serial Bus Controllers)
[+]USB
Generic USB hub
Bleah
Bleah
Simply right mouse click on all of them select "uninstall" once they've all been removed, restart your machine, windows will re detect all your USB devices, and hopefully this time windows will install either a newer or older version, different version of drivers.
Then re-install..... there's not a lot else you can try.

Similar Messages

  • While updating the software of my iphone 4 it just stop and restart and keep doing this

    While upgrading the software of my iphone 4 it just stop updating and the apple screen appear then it just turn on and off on the apple screen..i try the sleep mode and turn it off but when it turn on it goes on the apple screen and restart on and off..tell me what to do please....i try everything reseting while conecting through usb etc..

    Your screen is probably broken in that area and the "ink spot" you think you see is LCD liquid on the inside of the panel that's leaked and spread out.

  • I am getting error message while attempting to upgrade the software to iOS 6.1.3

    Hi,
    Need help on this, i am getting error message while attempting to upgrade the software to iOS 6.1.3

    The Current iOS for the iPhone 4s is iOS 7
    How to update your iPhone, iPad, or iPod touch

  • TS3694 My IOS is 4.3.5 and i have jail broken the iPhone and now i want to remove the jail brake and update my IOS to 6.1.2 and i cannot upgrade the software or restore the software, i keep getting the 3194 error and i even tried to while in DFU mode, sam

    i have tried to upgrade the software and i get the 3194 error message, i have tried restoring and i got the same error and i also tried while in DFU mode and still got the same 3194 error message.
    I really want to remove the teathered jail break and upgrade the software so if anyone knows how to get that done please let me know i would really appreciate it.
    Thanks in advance

    http://support.apple.com/kb/ts3694#error3194
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • Pages Software keeps crashing while using the Instant Alpha tool???

    Hey All-
    While working in Pages that came preloaded on my new iMac-it keeps crashing while using the Instant Alpha Tool???  Any help on what to do for this????
    Rather frustrating-thanks for any help.
    CPEI59

    Hey All-
    While working in Pages that came preloaded on my new iMac-it keeps crashing while using the Instant Alpha Tool???  Any help on what to do for this????
    Rather frustrating-thanks for any help.
    CPEI59

  • While upgrading the system hanged

    I was prompted to upgrade & the software downloaded, but while starting the system hangs up

    after the software upgrade was installed the system was booting up and it crashed
    Now when I try to start the system it asks for the password and after entering the password the systems seems to start but halfway through the process, the laptop shuts down on its own

  • TS3694 errorcode 11 appears when I was trying to upgrade the software for my iPhone 3GS

    While the upgrade to ios6 went on smoothly for my iPhone 4 and my iPads, while upgrading the iPhone 3GS, I came across this error message. Can some one help me how to get this sorted out ?Now the phone shows that I should connect it to my computer through USB although it remains connected and the error message comes only after the phone is connected and it tries to extract the software and update.
    regards
    Rao

    How EXACTLY was it "unlocked"?
    ONLY the carrier it is locked to can authorize unlocking it. Anything else is a hack.
    If it was hacked/jailbroken to unlock it, you can't get help here per the terms of service. It is most likely now bricked.

  • I just updated my itune on my PC and now it doesn't start.  There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data?\

    I just updated my itune on my PC and now it doesn't start.  There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data?  How can I fix the problem? Thanks

    Try this from MacFixIt as well:
    In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
    * Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
    * Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear.

  • I have Photoshop CC, but I'm getting daily reminders to upgrade the software. This can't be right...

    I have Photoshop CC, but I'm getting daily reminders to upgrade the software. This can't be right... Plus, I get reminders to upgrade Photoshop CS6, but I deleted CS6 a while back. Any help would be great...

    Sign in or activation errors
    Mylenium

  • I phone not working after upgrading the software

    I am having an unlocked model Iphone which was presented to me by a friend who lives in USA. Since I am in Sudan, I started operating it in Khartoum and was working OK. Now recently, when I connected my Iphone to Itunes, there was an option to upgrade the software, and so I did it. After successfully upgrading the latest version of software, My Iphone does not support the carrier sim card. Now I want to go back to my previous version of software. What should I do now?

    I'm sorry but no one here can help you. The TOU of these forums does not allow discussion of fixes for hacked phones. You'll either need to contact whoever did the hack or use Google to find alternate help.

  • I'm new using Logic, i've been using garageband for quite awhile now though but my question is just basic. When i want to record electric guitar while clicking the software option it brings me to alot of guitar sounds that i want to chose. I chose the twa

    I'm new using Logic, i've been using garageband for quite awhile now though but my question is just basic. When i want to record electric guitar while clicking the software option it brings me to alot of guitar sounds that i want to chose. I chose the twangy electric or the distorted strat but i only hear clean sounds. No matter what kind of guitar sound i chose in the library it only produces clean guitar. How can i make it sound like it supposed to? Did i miss something i should do?

    This definitely has me stumped as I'm unsure as to why your guitar can be heard, but with none of the channel strips plugins applied to the sound.
    On the record enabled channel strip that contains your guitar input, is the "I" button located near the "R" active? Also, if you record your guitar, can you hear the FX applied to it when you play back the recorded track?

  • Hi i have an ipod 4th gen. the problem is when ever i try to sync my iPod to my computer a mesage comes up and says that the ipod can't be backed up. There wasn't a problem until I upgraded the software. How do I fix this??

    Hi i have an ipod 4th gen. the problem is when ever i try to sync my iPod to my computer a mesage comes up and says that the ipod can't be backed up. There wasn't a problem until I upgraded the software. How do I fix this??

    Try here:
    iOS: Troubleshooting backup issues in iTunes

  • Error while upgrading the patch from RMS 13.1.1.1 to RMS 13.1.1.2

    Hi,
    While upgrading the rms dbschema from 13.1.1.1 to RMS 13.1.1.2 we are getting the following error update ALC_FREIGHT_COST table or view doesnt exist.
    We have checked the data model of rms 13.1.1 and rms 13.1.2 and we couldnt find the table "ALC_FREIGHT_COST."
    So anybody could give suggestions on this.
    Appreciate your help
    Thanks,
    Suresh

    I'd ignore the error for the moment and file an SR with OracleSupport to make them aware of the issue and release a better script - all of this assuming that your 13.1.1 starting point is valid and correctly installed.
    Additionally you can locate the SQL upgrade script that is actually trying to do something on the mentioned table, and grasp what it is trying to achieve and how relevant that is for you.
    The table exists in our 13.0.3 setup. The release notes of 13.1.0 mention a rework of cost component functionality, so seems like it was deprecated in that release.
    Best regards,
    Erik

  • I attempted to upgrade the software on my iPad and I got a message that said it couldn't restore the iPad software due to an error. Now the iPad has a black scrren with the apple symbol and the processing symbol going around.

    I attempted to upgrade the software on my iPad 2 and I got a message that said "unable to restore Ipad due to error". Now the iPad had a black screen with the Apple symbol and the processing symbol going around and around. When I tried to re connect it to iTunes is says "cannot connect to this iPhone due to error". How do I reset the ipad?

    Please Get the iPad User Manual for iOS 5.

  • Screen turns into blue when i upgrade the software for iphone 5s

    screen turns into blue when i upgrade the software for iphone 5s

    There's way too much blue in that green screen
    This is green
    Try pulling down the spill level and reducing the spill tint. You're probably going to have to tweak the color selection manually.

Maybe you are looking for

  • How to tpalloc() based on sizeof() value?

    Hello All, If I have a C structure (say no pointers inside), is there any way to allocate Tuxedo FML buffer to hold this structure data. Can this be done in one shot? Or Is there some way to determine value of tuxsize where csize = sizeof(struct emp)

  • After update to iOS 7.0.4 i can't find AirPlay in the Controlcenter. Can anyone help?

    After update to iOS 7.0.4 i can't find AirPlay in the Controlcenter. Can anyone help?

  • Adobe viewer on iPhone Sign in Problems

    I can log in to Acrobat.com and digitalpublishing.acrobat.com successfully. I can see the folio that I made in InDesign CS6 in digitalpublishing.acrobat.com, so that suggests to me thatmy ID is verified. My problem is that when I attempt to log in to

  • Your system has not been modified

    When i go to install the itunes 10 i get a message saying system not modified. How can i resolve this problem ?

  • Update ios7 on ipad

    To whom it may concern I want to update my Ipad to ios7, it says I need 3.3 gb of free space to do so. I have deleted almost all my music, texts, photos, apps, and I only freed up 1 gb. It says I have 2 gb free. But I want to know what has used 11 gb