Non-cumulative Values not showing in Inventory Management Queries

Hi:
Has anyone had a problem with the new version and Non-cumulative key figures not showing up in Bex for Inventory Managemet reports? Specifically, they showed and validated back to ECC for our Development and QA boxes but now in our Regression box they are all showing zeros. Our Cumulative values are all showing correctly still within the Regression box. For example, Total Receipts and Total Issues are correctly poplating values but Total Stock is not.
I have checked and validate that the configuration in the Regression box matches or Dev and QA box.

Found the problem. It had to do with the compression variant in the delta process chain. The compression was set to 'no marker update'. Since we only started receiving measureable deltas in or regression box this is where the incorrect setting showed up. Reinitalized and the deltas are working correctly now.

Similar Messages

ADF values not showing in inventory

I have a couple administrator defined fields (ADF) that seemed to be populated on the workstation (shown in %ZENWORKS_HOME%\work\inventory\*-cdflast.xml) but they do not appear in the Zenworks inventory report. Why would that be?
(ZCM agent v11.2.4)

Must I have "Launch Collection Data Form" checked in Inventory/Scan Now to get ADF into the inventory?

Inventory Management (Non-cumulative values)

Dear experts,
I want to extract inventory data from 2LIS_03_BF.
How do I have to configure the Key figures; for example: 0VALSTCKQTY. Is there a need to use Non-cumulative value with in- and outflow as in Content.
Which other possibilities exist?
After InfoObject config. - what are the exact next steps?
Do I load data from the 3 DataSources 2LIS_03_BX, 2LIS_03_BF and 2LIS_03_UM into one DSO first and then into one cube or do I have to split?
I dont want to use the BC data flow.
Thanks for your advice.
Patrick

hi,
Please search the Forum for this, this has been discussed many times.
regards,
Arvind.

"initial non-cumulative for non-cumulative values" is not available in DTP (0AFMM_C02)

Hi Experts,
We are working for BI implementation for AFS Industry,
when we are working on AFS specific inventory cube 0AFMM_C02 , we are facing stock mismatch problem
for AFS Stock initialization we are using the data source 2LIS_AF_STOCK_INITALIZATION instead of 2LIS_03_BX, this data source is specificly designed for AFS
when we are extracting the data using 2LIS_AF_STOCK_INITALIZATION for stock initialization and
2LIS_03_BF data source to load the Moments.
we compressed cube with Marker update for 2LIS_AF_STOCK_INITALIZATION data load(by deselecting the No marker update check box)
we compressed cube with No Marker update for 2LIS_03_BF historical data load(by selecting the No marker update check box)
we compressed cube with Marker update for 2LIS_03_BF Delta data load(by deselecting the No marker update check box)
Now we are facing stock mistach problem, we found reason for this
"initial non-cumulative for non-cumulative values" option is not available in DTP only Delta & Full options are available
and infopackage of 2LIS_AF_STOCK_INITALIZATION data source also has "Full update" instead of "Generate Intial Status"
Please let us know how can we get the "initial non-cumulative for non-cumulative values" option in the DTP level.
Regards,
Chandra

Hi Chandrakumar,
We are facing the same problem, how do you solve it?
Regards,

Non-Cumulative value Infoset will not work

Why doesn't an Infoset work with non-cumaltive values? Can I just use a multiprovider to get around this issue?

Hi,
Non cumulative values are not stored anywhere in the database. These are just definitions which are calculated at runtime. Consider the Stock cube. It has 2 key figures. Received stock and issued stock. It also has a Non cumulative Kf total stock which is defined as inflow : Received stock and outflow : issued stock.
At Query runtime, the total stock is calculated as inflow - outflow. No data is physically stored in your database.
Since an infoset joins values stored in a database, you will not be able to use it for Non cumulative values.
What you can do is find your Non cumulative KF definition, and map the input fields for this KF. You can then try and use these fields to calculate the value as a formula.
Hope this helps.
Regards.

The InfoCube contains non-cumulative values

Hi,
While creating multicube for inventory on two cubes its askin the below "The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube)", what is that and how to solve this,
Please through some light on this its urgent.
Chandan

Hi,
Your multi cube is probably based on the infociune 0IC_C03 containing non cumulative key figures taht's why you get this message.
You generaly don't have to maintain validity area unless you are in a special configuration (for exemple loading data from two source systems).
UThe following link should give more information about validity area with non cumulative :
[http://help.sap.com/saphelp_nw04/helpdata/en/02/9a6a1c244411d5b2e30050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw04/helpdata/en/02/9a6a1c244411d5b2e30050da4c74dc/frameset.htm]
Hope this helps.
Cyril

Error "Material not subject to inventory management in Plant " on the STO

I want to create a Stock tansport order ( plant to plant transfer) with stock & non-stock item and non stock item is giving an error "Material not subject to inventory management in Plant". Please tell me how to clear this error. Plant / SLOC view is already maintained and no qty/value update selected on the material type because of non stock item. Please tell me how to overcome this error on the STO

Hello,
As you said you want to move nonstock item through STO.
It seems that in your case say for example your plant 1000 has material ABC which is maintained as stock item.
Now you have another plant 2000, whaich has same material ABC which is maintained as non-stock item (generally used in third party sales or cross docking).
If your material ABC is nonstock in plant 2000 where no stocks are mainatined, then how can you move the stock to plant 1000 where it is stock item.
Could you please confirmthat can you see the stock in MMBE for plant where that material is maintained as non stock item.
If so, then you have chnage the plant specific material status for that plant from non stock item to stock item.
This is maintained in material master in purchasing view.
The other way out is you have to third party sales with ship to party as the plant where that item is maintained as stock item.
In this case flow is
Sales order>>Purchase requistion>>Purchase order>>(Vendor supplies material directly to customer (which is you plant where that item is stock item))
Br,
Tushar
Instead you can acheive

Non-cumulative values

HI All,
when I run a query of a non-cumulative infocube,there's always a "initial record" which actually doesn't exist in the fact table. Documents say "This entry does not remain physically in the table, but it is available for rebuilding the non-cumulative values". So where exactly is the initial value stored ?
Thanks
han.

Hi,
What is teh DataSource and InfoCube?
If you are talking about 0IC_C03, please see the steps.
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
See about Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/content.htm
Thanks
Reddy

Non-cumulative value KF

Hi:
I have given the Aggregation as SUM and the Excepiton Aggregation as Last Value for a non-cumulative KF Quantity Total Stock for Inventory. I am using Non-cumulative value with in- Receipt Quantity Total Stock and out-flow Issue Quantity Total Stock. Then I can calculate Quantity Total Stock in Query.
But I have another requirement, I want to a KF to count 0Material whose Quantity Total Stock not equal 0. In fact, for a Non-cumulative value, the Aggregation reference char of KF Quantity Total Stock is 0calday, but what I want is 0Material. How could I create such KF?
Many thanks in Advance!
Points will be assigned!

Hi,
The basic purpose of Non-cumulatives is to get the values for them depending upon the Time Characterestics alone and not on any other characterestics. As far as I know you cant use 0MATERIAL as the aggregation reference Char.

Maintaining non-cumulative values in Mlti provider

Can we maintain non ucmulative values inteh multi ptovider Extras - > Maintain non cumulative values section.
I created few new cubes which has non cumulative keyfigures . In the cube I made 0CAL DAY as reference characteristic and selected Company code (0COMP_CODE) and Posting date in the document (0PSTNG_DATE) as characteristics of validity table for non-cumulatives.
Now I inlcude the new cubes and identified the non cumulative key figures in the multi provider.
Now here also do I need to make 0CAL DAY as reference characteristic and selected Company code (0COMP_CODE) and Posting date in the document (0PSTNG_DATE) as characteristics of validity table for non-cumulatives.I did not find an option in Extras - > Maintain non cumulative values in multi provider. CAn we maintain non cumulatives in MP ?

Hello,
You dont need to maintain it at the MP level also.
Non-cumulative parameters are manitained only at the cube level.This was the case in 3.x so it should be the same in 7.0 also.
Regards
Ajeet

When do we use Non-Cumulative values?

Hi BW Experots?
When do we use Non-Cumulative values?How is it related with exception aggregation
Please tell me .
Thanks in anticipation.

Hi,
Taken from std, doc....
A non-cumulative is a non-aggregating key figure on the level of one or more objects that is always displayed in relation to time. Examples of non-cumulatives include headcount, account balance and material inventory.
http://help.sap.com/saphelp_nw04/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
Check this out...
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
Pls. assign points if this helps you.. ****
Thanks,
Raj

Non cumulative with non cumulative value change

hi,
can any one tell the concept of non cumulative with non cumulative value change with an example with numbers,i am bit confused .
like we have for non *** inflow and outflow- stocks inflow and outflow so non *** is based on inflow and inflow.
in the same way any example for above concept

Hi Venkat,
If I under stand your question correctly you wish to have an example of where non cumulative values are used and you have given the value of stock? If so here is an example with figures
So you would do an initial load loading the opening balances of Stock.
Say material number 12345 = 100 units
After that, only movements will be posted so Stock will either increase or decrease depending on what image is posted via the change log.
So there will be a purchase of material 12345 for 50 units so now the balance of material is 150.
But then you could use or sell 70 units of material 12345 so you stock value would be 80 units
I hope this makes sense and this is an example that you are after if not please let me know and I'm happy to help
Regards
Ben
PS assign points if useful

KF creation - Non-cumulative value with NCUM value change - option

What is the use above option in the KF creation?
Thanks

Hi,
A non-cumulative is a non-aggregating key figure on the level of one or more objects, which is always displayed in relation to time. Examples of non-cumulatives include headcount, account balance and material inventory.
If you use non-cumulative key figures, an absolute non-cumulative value (the marker) and all non-cumulative value changes are saved in the fact table of the InfoCube. In this way, the retention and volume of data in the data loading process is optimized. A data record is then only loaded to the InfoCube if a non-cumulative changes because of a transaction. Non-cumulatives can then be evaluated at any time in queries, using non-cumulative key figures.
Pls chk this links;
http://sap.seo-gym.com/inventory.pdf
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Reagrds
CSM Reddy

External hard drive seagate 3.0 cant read and not showing in disk management.

Why my external hard drive seagate 3.0 cant read and not showing in disk management, while 2.0 can read. please help me to solve it. BIG THANK YOU..

Hi,
Yes, like Vegan said, you should check if your Seagate hard drive if it could available in USB 3.0 port. This is hardware related.
Karen Hu
TechNet Community Support

IPhone 4s not showing up in manage devices

My wife's iPhone 4s shows up in the side bar of iTunes and sincs fine, but does not show up in Manage devices on her account, where as her iPad does. it clearly shows you how to remove devices, but how can we add one?

"Manage Devices" appears under the broad heading "iTunes in the Cloud". I suggest you (or she) do this on her iPhone 4S:
Go to Settings > iCloud and make sure she is signed on there with her Apple ID.

Non-cumulative Values not showing in Inventory Management Queries

Similar Messages

Maybe you are looking for