Non leading ledger (V3) shows wrong fiscal year

Hi All,
I am using leading ledger for USA (K4) and Non-leading ledger for local GAAP, India (V3). while posting into Asset Accounting, it is recorded properly bu when i am executing report for Asset accounting, i am geting the information in V3 for 2011 fiscal year which supposed to be in 2010.
Can anyone help me to resolve it.
Thanks & Regards
Sukant

HI,
check SAPNET notes 844029 and 1175751 they describe the SAP standard system behaviour and what you can do.
best regards, Christian

Similar Messages

  • Line items posted through the non leading ledger

    Hi Sap Experts,
    I have activated non leading ledger to which assigned fiscal year variant.
    I want to post line items through the non leading ledger.
    Can any body please me advise.
    Regards,
    Prabhakar

    HI,
    Use the tcode FB50L and FB01L.
    It is Ledger group posting without LeadLeadger.
    Regards
    Madhu M

  • Non Leading Ledger Posting

    Hi Guys,
    Have client requirement in Non-Leading Ledger.
    For MIS reportting purpose Non Leading Ledger using, dont impact on Leading only for MIS purpose post some Entryes. FB50L use for Non Leading Ledger Posting.
    1. Normal Expenses booking every month - No issues
    2. Provision book for Customer & Vendor every month dont impact on any logal Books - In this case is it possiable manual JV ?
    I tested one scenario Normal Expenses booked in FB50L 2012 8 period Document Type is SA. If saw in FAGLFLEXT Table 2012 - 8 period no values it is coming only in 16 period only.
    3. Will book any Manual JV Expenses book in FB50L Non leading ledger will show 16 period only ? or any setting is wrong.
    4. Will book any Expenses in FB50 Leading automatically updating in Non Leading Ledger will see in FAGLFLEXT Table same value showing under 16 period only.
    If i check in FAGLFLEXA Table is showing correctly 2012 - 8 Leading & Non-Leading (FB50L)
    5. We are using 30 company codes in 30 Countryes. Currency Keys is 10, 40, 60- USD. 60 is common currency for all co.Codes. issue is i developed one report in Report painter Used FAGLFLEXT Table. 60 Global Company Currency is not updating.
    Please provide the soluation on above points it is very urgent.
    Thanks
    Ramu

    By default system will post to all ledgers that is leading and non leading ledgers for a posting. However you can make postings to non leading ledgers independent of leading ledgers using Fb50L which should not be open item managed.
    Non leading ledger will contain all postings of leading ledgers + postings related to local reporting requirements.
    There is no way that you can control this in my opinion using SAP standard functionalities.

  • Function of non leading ledger

    Hi
    I am booking expenses in one company code and for management reporting distributing to another company code by cost centre distribution. During this process system is creating cross company code accounting document which we want to avoid.
    I heard that we can not avoid cross company code transaction. But instead of posting entries into leading ledger, system can post these cross company code transaction into non leading ledger during cost centre distribution.
    Is it possible? If yes, please guide me how. If not possible, any other way to achieve above result?
    Following components are active in my system:-
    1.Profit centre accounting
    2.New GL functionality
    3.FICO reconciliation
    Please revert.
    Regards
    DD

    Hi,
    There is exactly only one leading ledger at client level. SAP Provides Leading Ledger with Standard System. Only the leading ledger passes and posts values to CO in the standard system. The Leading ledger manages additional currencies, Fiscal Year Variant and Posting Period Variant that are assigned to the company code. ONe are more SAP delivered scenarios(Cost Center/Business Area/Segment Update) are to leading ledger. These scenarios are updated in corresponding General Ledger view duriing the document posting.
    In addition to the leading ledger, you can also define other, non-leading ledgers that are assigned currencies and/or fiscal year variants that differ from the leading ledger. Multiple/non-leading ledgers are useful for portraying accounting in accordance with different accounting principles(ex. Local and Tax accounting principles). It is not necessary to define Non-Leading ledgers even if you have it is not necessary to assign scenarios(mentioned earlier) to Non-Leading Ledgers.
    Regards,
    Krishna Kishore

  • Advantages of Non Leading ledger

    Hi Friends,
    This is Ajay ,can anay one tell me, how to assign a Feild status varient to a non leading ledger in
    sap fico .
    Also tell me the advantages of a non leading ledger, and how it works in real time scenario?
    Thanks & Regards
    Ajay

    Dear,
    Non Leading Ledger:
    The non-leading ledgers are parallel ledgers to the leading ledger. They can be based on a local accounting principle, for example. You have to activate a non-leading ledger for the individual company codes.
    Non-leading ledgers can have different fiscal year variants and different posting period variants per company code to the leading ledger of this company code. The second and third currency of the non-leading ledger must be a currency that is managed as second or third currency in the respective company code. However, you do not have to have a second and third currency in the non-leading ledger; these are optional. Alternative currencies are not possible.
    The non-leading ledgers are parallel ledgers to the leading ledger. They can be based on a local accounting principle, for example. You have to activate a non-leading ledger for the individual company codes.
    Non-leading ledgers can have different fiscal year variants and different posting period variants per company code to the leading ledger of this company code. The second and third currency of the non-leading ledger must be a currency that is managed as second or third currency in the respective company code. However, you do not have to have a second and third currency in the non-leading ledger; these are optional. Alternative currencies are not possible.
    Check link: http://help.sap.com/SAPHELP_ERP2004/helpdata/EN/44/48584025233b70e10000000a1550b0/content.htm
    http://wiki.sdn.sap.com/wiki/display/ERPFI/NewGLBasicOverview
    Regards,
    Syed Hussain.

  • Fiscal Year for Non-Leading Ledger Issue

    Hello Experts,
    I am implementing New GL concept in my Current Implementation..
    We have one company code which is based at US and has a branch in india
    In this case, i have configured one non-leading ledger with Fiscal year variant V3 and Currency INR.. for Indian local Reporting...
    Here after posting the transaction, In F.01 report, i am not able to view the Fiscal period for that non leading ledger which i have crated for India
    Kindly help me.. I want to view the F.01 report with US posting period when i executed with Leading ledger OL and V3 fiscal period when i execute this with Non- Leading Ledger KS
    Kindly Help me regarding this. And also help me to provide some transaction codes for executing reports exclusively for Non- Leading Ledgers..
    Thanks
    TK Surya

    Hi Aravind,
    Thanks for the immediat response. But I am not able to understand the activation of non leading ledger and activating it with two currencies and fiscal year variant. Can we have two reporting structure with two periods with two different starting and ending dates.
    Thanks once again
    surya

  • Ledger Group field NOT showing in FB03 after activating Non- Leading ledger

    Dear All Experts,
    I have activated non leading ledger for my company code and posted the document successfully from FB60. Now coming to FB03 I can see the document in Local Currency and Group Currency - USD but the Ledger Group field still shows complete blank. As I guess it MUST show 1F ( Non Leadig Ledger ) which is my non leading ledger.
    Where I missed the configurtation step ? If anybody has gone through the same issue please guide or provide some inputs.
    Regards,
    Revati Joshi.

    Non-leading ledger use t codes FB01L and FB50L
    The reason that the Ledger Group 0L is being used it´s because the Accouting Principle of your Valuation Area.
    What you have to do is you need to create a new Ledger Group and assgn it to your valutaion area.
    Then you assign this accounting principle to the valution area.
    Then assign the accounting principle to no Ledger Group.
    Please see the customizing path:
    Define new Ledger Group:
    Financial Accounting (New)>Financial Accounting Global Settings (New)>Ledgers>Ledger>Define Ledgers for General Ledger Accounting (dont active your new ledger as leading ledger. leave the standard as the leading )
    Assign Accounting Principle to none New Gl Group:
    Financial Accounting (New)>General Ledger Accounting (New)>Periodic Processing>Valuate>Check Assignment of Accounting Principle to Ledger Group
    Assign your Valuation Area to the accounting principel just assigned to none NewGL Group:
    Financial Accounting (New)>General Ledger Accounting (New)>Periodic Processing>Valuate>Assign Valuation Areas and Accounting Principles
    Now you have more then one Ledger Group in you client (which is not being used for nothing) and you have a valuation area that is linked to a Accounting Principle that is linked to no Ledger Group.
    Go ahead now and execute the FAGLF101. You will see that the standard will not try to inform leading ledger in the Group of Ledger.
    I found this solutiong debbuging the standard. Took me quite a bit to discover.
    The problem was in SPRO->Financial Accounting(New)->General Ledger Accounting(New)->Periodic Processing->Valuate->Check Assignment of Accounting Principle to Ledger Group. In "Target Ledger Group" field, the ledger "0L" were configured in BRAP and GAAP. So, the system automatically assigned the ledger "0L" when performing FAGLF101.

  • Leading and non leading ledger balances do not match in FAGLB03

    Hi,
    Balance for period 5 as per FAGLB03 for leading ledger (0L) is say $104.
    The same balance as per nonleading ledger is $176.
    I checked in FAGLF03 and no difference exists there.
    The issue is only with period 5, the other periods display the balance right.
    There is some balance from period 6 that adds up in the credit line items balance and thats the reason for difference.
    Please suggest.
    Regards,
    Soujanya.

    Hi all,
    Any ideas please??
    In other words from my previous posts:
              1. Earlier this year (around February) the non leading ledger's (Fiscal Year Variant - K4) was changed in accordance to leading ledger's FYV - YY which is April to March (year dependent).
    2. So, the periods in FAGLB03 are divided based on calender months for non leading ledger (X1).
    3. As the periods in leading ledger(0L) are year dependent the open and close dates are different than the calender months.
    4. That's how calender month(or old K4's fiscal period of X1) August, has 2 0L's fiscal periods i.e. 5 and 6 (5th period closing date was 27.08.2011) and the 6th period start date is 28.08.2011
    5. For X1 - non leading ledger when I drill down on the balance of 8th calender month i.e. August , it shows some balance from period 6, where it should not. It should only give us the results of period 5.
    6. The results were right for periods 2, 3 and 4 in accordance to 0L's year dependent results. Wondering what went wrong in period 5.
    As this is a month end closing issue, would appreciate any clues fast.
    Regards,
    Soujanya.

  • Exit for to restict Non-leading ledger posting periods for Document Type SA

    Hi,
      Please give the guidelines to complete the following requirment.
      In SAP FI two ledgers Leading(0L), Non-Leading (J2) Posting periods are defined in OB52.
    If non-leading ledger is closed also it will take the Leading posting periods and Posting the document..
    This is the SAP Behaviour.
    Like in FB50L if we enter J2 (Non-Leading) it will display the erro message like
    Posting period in not open.
    Like that they want for FB70,FB75,MIGO,MIRO,FINT and Invoice(VF01).
    Please suggest the suitable exit.
    Thanks & Regards,
    Padmaja.

    Hi Ramu,
    Please refer the below points,
    1. Leading ledger is only one ledger in one client.
    2. In one client you can keep N of non leading ledgers.
    3. company codes are need  assign to non leading ledgers.
    4. All postings will update leading ledger by default.
    5. Non leading ledgers will update if  company code is assigned to non leading ledger.
    6. If you want to  post only non leading ledger then please use the tcode FB50L and FB01L.
    7 You can set the separeate fiscal year variant for non leading ledger.
    I hope above information will resolve you r issue.
    Regards
    Madhu M
    http://wiki.sdn.sap.com/wiki/x/JghNCw    (NewGL Migration Secnarios)
    http://wiki.sdn.sap.com/wiki/x/mosOD     (Document Splitting Wizard)
    http://wiki.sdn.sap.com/wiki/x/f4OfDg    (NON-LEADING LEDGER SPECIFIC
                                                                  POSTING)

  • Post SKF only to New GL -Non leading ledger

    Hi New GL experts,
    We have an issue with SKF ( Statistical key figures) in New GL.
    The below 2 options are considered:
    1. Entry from KP46 ( CO Module) - Flowing to Leading and Non leading ledger. But the period is wrongly derived in Non leading ledger.
    2. Entry from FAGLSKF1 ( New GL) - Posts to both Leading / Non leading ledger ( with correct periods) - But does not flow to Controlling.
    Is there any way to post the SKF to Non leading ledger only ? or to CO module only without updating to Leading / Non leading ledger ?
    Thanks in advance for your help.
    Siva

    Hi Siva
    Option 1 - If you deactivate the "Integrated Planning" in CO Version 0 OKEQ and also in GL Planning, the Plan data in CO wont auto update to New GL at all..
    You need to then manually push the plan data into New GL using a special T code.. You can find the T code in the SPRO where you set up GL planning
    Option 2
    FAGLSKF1 does not update controlling, as designed.. So, maintain your SKFs independently in FI and CO
    Option 3
    Try to raise it to SAP if the period in Non Leading Ledger is wrong.. Ideally, the period you enter in KP46 should convert to the Non Leading Ledger period as per the Fiscal yr variant of Non leading Ledger
    Br, Ajay M

  • Currency to Non Leading Ledger

    Friends,
    I want ot give the USD currency to my non leading ledger. how should i do that?
    Please give me IMG path also.
    My co  code currency is INR. For my non leading ledger i want to give UDS currency.
    Right now posting in non leading ledgers are also in INR which i want in USD.
    Thanks & Regards,
    Reva.

    Hi Reva,
    Have You checked this
    SPRO--Financial Accounting (New)Financial Accounting Global Settings (New)LedgersLedger--Define and Activate Non-Leading Ledgers
    Here if you provide the non leading ledger, it will take you to a screen where you can define the currency for non leading ledger
    In this IMG activity, you make the following settings for the non-leading ledgers for each company code:
    1) You activate the non-leading ledgers in the company code.
    2) You can define additional currencies beyond that of the leading ledger. The first currency of a non-leading ledger is always the currency of the leading ledger (and hence that of the company code). For the second and third currencies of a non-leading ledger, you can only use currency types that you have specified for the leading ledger.
    3) You can define a fiscal year variant that differs from that of the leading ledger. If you do not enter a fiscal year variant, the fiscal year variant of the company code is used automatically.
    4) You can specify a variant of the posting periods.
    Hope this helps
    Regards
    Pratiksha

  • Opening balance upload in Leading and NOn leading ledger.

    Hi All.
    We are in the phase of opening balance upload. We are using Leading and Non leading ledger concept. Our Leading ledger starts on 29th of March 2009 as per UK reporting and Non leading ledger starts from 1st April to 31st of March as per India reporting.
    We were going to upload the opening balance as on 22nd of Nov as per UK reporting. But here We stuck because as per India reporting our 2008 fiscal year has been closed on 31st of march 2009 also financial books has been closed. But due to UK reporting we are carrying 29th to 3st march 2009 P&L balances in Leading ledger which has been considered in the India Balance sheet ( has come in Profit and Loss Account).
    Here I am not able to understand that how I should upload the 29th to 31st march P&L balances in leading ledger because if I will upload these through F-02 or FB50 BDC than these will effect the India balances also. If I am using the FB01l or FB50L to upload the Non leading ledger balances, than system is not allowed me to upload the balances in open item management accounts. System prompt me following message.
    Postings to G/L accounts with open item management are not permitted
    Message no. FAGL_POST_SERVICE012
    Diagnosis
    You use G/L account 213702 in company code 7041 with open item management. However, postings are not permitted to G/L accounts in individual ledgers with open item management.
    Procedure
    If you have not yet made any postings to this account and if the account is to be used for closing processes in non-leading ledgers, deactivate the Open Item Management indicator in the company code data for the G/L account.
    Can any one tell me that how I can Achieve the same with correct P&L affect in Leading Ledger and correct effect in Non leading ledger Profit and loss account.
    Appreciate your immediate response.
    Many thanks

    Hi
    If your problem is solved, can you please let me know the solution for upload of customer, vendor and other open GL items in Non Leading Ledger.
    Regards
    Sourabh

  • Balance Carryforward - Non-Leading Ledger

    Hello SAP'ers,
    We have 2 ledgers, 1 leading of course with a Fiscal Year of June to May, and one non-leading ledger with a fiscal year of April to March.  I can't find any documentation on when to run the balance carryforward program for the non-leading ledger.  We have started FY2009 for our non-leading on April 1/  Do  I run FAGLGVTR - Balance Carryforward (New), for the non-leading ledger only?  I know in June I will run it for the leading.  SAPs info is fuzzy regarding the non-leading carryforward process.
    Thanks for your help.
    JIm

    Hello,
    I am not sure if I understand quesition correct.
    1. Internal order per ledger - this link might give you some information.
    FB50L FI-posting to an internal order
    You can report internal orders per cost element (acutal and plan)
    Use reports in: SAP Menue/ Information Systems/Accounting/Controlling/Reports for Internal Orders/Summarization Reports or/and More Reports
    as an instance: S_ALR_87013010
    direct output to Excel and drill down functionality for details.
    2. GL balances per ledger: use F.08 and select ledger, then you have report per ledger
    Let me know if this is what you have expected.
    all the best Erwin

  • Preventing posting in leading ledger by closing period in non leading ledge

    Is it possible?
    I have 24 periods in non leading ledger and want to prevent posting in the leading ledger if the posting period is closed in non leading ledger. Currently when I try to post thru FB50L, for closed period, if I mention the non leading ledger, the document is not posted. But when no ledger group is mentioned. the document is posted in both ledgers.
    Thanks for your thoughts on this.
    Regards,
    SSK

    You have to define a separate Fiscal year variant to non leading ledger using with the following path
    Financial Accounting (New) > Financial Accounting Global Settings (New) > Ledgers > Ledger > Define and Activate Non-Leading Ledgers
    Rgds
    Murali. N

  • Posting entry into non leading ledger for already closed books

    Hi
    We have two ledgers - Leading (as per IGAAP) and Non Leading (IFRS)
    Now there is Rs. 54Lacs expenses which are pertaining to March 2010. This expenses are being booked in October 2010
    Now as per IFRS, i need to re-instate this amount in March 2010
    So i want to pass this entry for IFRS ledger only in fiscal year which is already closed and carry forward
    So what should i do now?
    Should i open the posting period for March 2010 (last closed fiscal year). Is it possible ?
    If i open and post the entries, do i need to carry forward the balances again for IFRS Ledger ?

    Hi Meenu,
    You need to open the posting period 3 of 2010 and post entry only in the non Leading ledger of IFRS. When you post entry it will automatically be reflected in the current year.
    Secondly, the carry forward transaction does no harm even if you run it again..
    Regards,
    SAPFICO

Maybe you are looking for