None of the derived determination procedures is of category 02

Hi
Small doubt in Limit Management.
I have done most of the configuration.  In fact, I tested well in Development without any problem.
When I moved my transport requests and started testing in Quality system, I got problem 'None of the derived determination procedures is of category 02' problem.
If anybody come across this problem previously, can help me easily out
Thanks a lot in advance for your support.
Regards
Rag.

Hi Manisha,
This error comes with the difference of the type of the risk default risk rule and determination procedure may handle.
With my previous experiences, I would like to think the following:
1) This is a spot, most probably forex, deal.
2) The default risk definition has settlement risk checked.
3) The determination procedures to which it has been linked are of type credit risk only.
If that is the case, then you need to link a determination procedure of type settlement risk to the default risk rule as well.
Regards,
Jitesh

Similar Messages

  • Error - Logon not possible; none of the active logon procedures is possible

    Dear Gurus,
    I'm trying to configure SSL with User mapping to SICF service: NWBC.
    -SSL configured with STRUST transaction and I see that it is working via Internet Explorer
    -SICF service NWBC was set to: "Required with Client Certificate (SSL)"
    -User mapping was set like described in this article: https://help.sap.com/saphelp_nwmobile71/helpdata/en/17/1514e9b7eb4f74b0b49327b8f2a662/frameset.htm
    But I get error:
    Logon not possible; none of the active logon procedures is possible
    Any idea ?
    Please advise,
    Dimitry Haritonov

    Hi,
    I would try to check logs first. In transaction SMICM you can set up level of logging for ICF services. So set it up to the highest possible level (this one actually dumps whole content of HTTP request, so maybe that's not necessary) and try logon again. You should get a reasonable info and you can try to figure out why it fails.
    Cheers

  • Error in the price determination procedure in the Delivey NL

    Hi Gurus,
    I'm working in a project and the customer wants the delivery note with value. Then I have activated the Price determination procedure for the delivery NL ( deliveries to transport material between plants ) and the determination doesn't work correctly, The conditions doesn't appears but if you push "analisys" and you check the conditions PR02 and MWST,  the condtions record are determined but not printed in the document.
    It print the following message:This message tells you that the condition record exists, but has not been set in the document...
    Some ideas?? thanks in advance for your help
    Francisco Javier Fernandez

    Hello,
    Solved, in the customizing, you need check if the price determination procedure for the item category NLN is active, how?? spro>sales>basic functions>pricing>pricing control>define pricing by itgem category.
    Check if your item category NLN have "x" Active price determination procedure.
    Is nothing related with the reference to a PO, or copy rules...
    Best regards,
    Francisco Javier Fernandez

  • Necessity of the Partner Determination Procedure at Item Level

    Hi Gurus,   
                 What is the necessity of  the Partner Determination Procedure at Item Level and in what case it is useful?
    Regards,
    Sarosh.

    Dear,
    It may happen that in a business transaction the partner in the document header does not apply to all items, for example, if specific goods for a customer are normally delivered to another ship-to party.
    In sales documents and billing documents you can enter one of the deviating partners from the document header at item level.
    You have planned to have the partner function in the partner determination procedure for sales document items or billing items.
    When creating a document , the system copies the document header partners to the items. If you want to define another partner than the one in the document header at item level, overwrite the proposal from the item partner screen.
    You have planned the partner function ship-to party in the partner determination procedure in Customizing for sales document items and have defined this as changeable.
    Create a customer sales order as usual.
    The system copies the partner from the customer master into the document header and then from the document header into the items.
    Select the item, that should receive a deviating partner.
    Choose Goto --> Item --> Partners.
    The partner screen for the item appears. Here you can overwrite the changeable partner functions.
    Try to read the SAP help. U will find some more info.
    reward if helpful
    Krishna Chaitanya

  • Assign partner determination procedure to Item Category/Sales document type

    Hello All,
    How can I assign a partner determination procedure to an item category or sales document type? That field is disabled in item category config step. Please suggest.
    Thanks,
    lavanya

    HI Lavanya,
    The partner determination will happen through a different way and not through item category definition.
    The path would be
    S&D->MAster Data->Bussiness partners->customers->Customer hierarchy->set partner determination for hirearchy categories.
    In this you will have one option to define by item category.
    Hope this helps.
    Abhishek

  • Partner determination procedure and add to the transaction.

    hi all
    i tried to set up the partner determination procedure and i want know the how to add the procedure to the transcation .

    Thank you  Michaels.
    i got it ...

  • Territory and partner determination procedure for employee responsible

    Hi CRM team,
    I have a little issue for you I'll be very thankfull if someone could help me.
    There is the organisation of the territory management in the company I'm working for:
    -Country
    -Region
    -sector
    *each sector have a determination rule based on 1 condition "1 field from the BP Header (customer)"
    *each sector have a position assigned to it. (Organisational model PPOMA_CRM) And there is 1 or 2 employee affected to each position..
    *When creating an activity,*
    *First thing I enter the Account (customer: activity partner)*
    *I would like the system to determine the employee affected to the sector of the BP as the employee responsible.*
    Any Idea?
    For the moment, I'm searching in the partner determination procedure. But the standard access sequence Business Partner Relationships: Activity Partner -> User dont work.
    There is some sitting from my IMG:
    The partner fonction Employee Responsible is with
    *fonction category: employee
    *usage: CRM
    *Relationship category: Is the employee responsible for
    Partner determination procedure:
    In the acces sequence, I put a dialogue seq 15 : 
    Business partner from territory
    And in the detail on source, I put:
    Fonct. categ. : Employee
    Usage: CRM
    It dosn't work...
    I don't know if I'm am searching in the right place.
    Could you help me with a solution to have the needed system behavior????
    Thanks a lot for your time and your help.
    Best regards,
    Ahmed.

    Hi Ahmed,
    After created determination rules for territories have executed the report CRM_TERRMAN_PROC_REL for initial option?
    Once territories and determination rules are created, you need to run the above report in Background(schedule a batch job) which will establish relationships between the territories and corresponding attributes. You need to run this report every time there is a change in determination rule of create/change territories.
    This should resolve your problem
    Regards,
    Priyanka

  • Error in CHARM_CREATE when using a Z partner determination procedure

    Hi,
    I use SDCR and needed to create a new partner determination procedure ZDCR0001. I don't need to change anything else in this Change Request transaction type, so everything else is standard. When I run CHARM_CREATE now, the program is using the partner determination procedure instead of the text determination procedure SDCR0001 in order to get the text ids, and then I have an error: Text determination procedure ZDCR0001 does not exist.
    I noticed that there is a problem in the standard code of CHARM_CREATE:
    *&      Module  get_data_0101  OUTPUT
          Retrieve the Data to get different text types                  *
    MODULE get_data_0101 OUTPUT.
       IF gv_display = ' '.
         CHECK gv_created IS INITIAL.
    *get the required info for text processing
         CALL FUNCTION 'CRM_ORDER_PROC_TYPE_SELECT_CB'
           EXPORTING
             iv_process_type = gc_processtype
           IMPORTING
             es_proc_type    = ls_proc_type.
    *get the list of changes to be done
         CALL FUNCTION 'COM_TEXT_CUST_I_STRUC1_READ'
           EXPORTING
             iv_object               = gc_object-order_h
             iv_procedure            = ls_proc_type-part_determ_proc
           CHANGING
             et_struc1               = gt_zthead
           EXCEPTIONS
             textobject_missing      = 1
             textobject_not_found    = 2
             textprocedure_missing   = 3
             textprocedure_not_found = 4
             other_error             = 5
             OTHERS                  = 6.
         IF sy-subrc <> 0.
           MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
         ENDIF.
    This function module is for getting texts, but uses the partner procedure. I created a message and sent to SAP, but they say they don't have this error there. Has any of you had the same problem? I could not find any note to correct this code. I have SP 17 for ST.
    Thanks,
    Raquel.

    Mention the Function name starting with 'Z'
    Regards
    Sreenivas

  • Account Determination Procedure in Sales Order

    Hi All,
    I have a problem regarding account determination procedure in sales order.
    When I create a new sales document, and go to menu Environment --> Analysis --> Account Determination, the information about the procedure is blank.
    For your information, I already assign this sales document type to a billing type.
    This billing type also already has an account determination procedure, which is KOFI00.
    The G/L Account in VKOA also already been set up for the combination of Condition Type - Chart of Acct - Sales Org - Account Assignment Category in Customer and Material - Account Key.
    But every time I create a new sales order, I cannot get the account determination procedure.
    Anyone can please help me to solve this problem?
    Thank you in advance

    Hi Surya,
    Have you assigned Billing type For Ex: F2 or F1 to respective Sales Order Type in Sales Document Type controls VOV8.
    Assign these F2 against Delivery Related billing and F1 is for Order Related billing.
    Assign KOFI0000 to respective Billing Types F2 and F1.
    And check, hope issue may resolve.
    Revert if u have any query.
    Regards
    Durga sana.

  • Purpose of Access sequence in text determination procedure?

    Dear all,
    I can get my text id's at sales document header/item level by simply assigning my defined text id to the text determination procedure.
    now, what is the need for having an access sequence where a text abject and text id is maintained??
    Thanks and regards
    KV

    Hi,
    Define Access Sequences For Determining Texts
    In this IMG activity, you define the access sequences which the SAP System uses to determine the texts for a text object.
    Afterwards, you specify an access sequence for the text search in the determination procedure for every text type.
    You only define access sequences for sales and distribution documents, not for customer master records.
    With an access sequence, you define the sequence and the requirements of the search used by the SAP System to find a text.
    This allows you, for example, to have the system check whether a text exists in the customer language. If this is not the case, then a text in the sales organisation language can be searched for. If this is also unsuccessful, you can have the system carry out the search using English as the fixed value.
    To do this, you make the following specifications for every access sequence:
    acc. no (access number)
    With the access number, you define the sequence in which the text objects of an access sequence should be read. The element with the lowest access number is read first. If an appropriate text is found, the search is ended. Otherwise, the SAP System checks the element with the next number up.
    Text object
    Here, you define which text objects should be checked by the SAP System for an access sequence.
    In the standard SAP R/3 System, for example, in the access sequence 0001 for the text object sales document header is defined, that the SAP System first searches for a form header text in the preceding document (text object VBBK) and afterwards for a sales note in the customer master record (text object KNVV).
    ID (text type)
    Here, you define which text type is to be read from the specified text object.
    It is recommended to select the same text type for the text to be copied. For example, the text for the form header in the customer master record (text type 0001) should be copied into the text for form header of a sales document (text type 0001).
    kapil

  • Partner determination procedure assignment not possible

    Hi All,
    1) I had created the partner determination procedure
    2) Created partner function in procedure
    But while doing partner detremination procedure assignment i am unable to that and not able to create the new group customer account group, while doing so getting the message "This function is not possible"
    Please guide me how i to proceed further with this setting.

    1. Set up partner determination procedure.
    The first checkbox is to make the partner u201CNot Modifiable,u201D that is, once it is in the
    customer master record it cannot be changed. Generally, this is only used for the Sold-to
    Party.
    The second checkbox is to make the partner function mandatory, that is, the partner
    must be determined or manually entered in the customer master record.
    2. Assign Partner functions to the partner determination procedure
    3. Assign the Partner determination procedure to the customer account group.
    4. Assign individual partner functions to the account group
    regards,
    Sandeep

  • Output determination procedure as blank

    Hi functional experts,
    Am a technical consultant i have a requirement to make the output determination procedure as blank during customer creation.can anybody please tell what logic to write from the functional prospective.
    regards
    Prasun

    Hi,
    If you dont want a Output Determination Procedure at the customer Master Level. Check the following
    1) Check the Account Group of the Customer Master. VD02 --> Extras --> Administrative Data
    2) Go to Tcode OVT0 and give the account group. Check whether if u have Output determination procedure assigned to the account group
    3) if its assigned , then remove the assignemnt, save it and now create the customer , you will not find output data for the customers.
    Regards
    Srini

  • Recover a partner function in partner determination procedure

    hi,
    Could anyone please tell how can we recover a partner function if it has been deleted from the partner determination procedure.
    Thanks and Regards
    Mahavir

    its very urgent....please reply ....

  • Text determination procedure with sales doc type

    For the Sales Doc type 'OR' , I am getting TEXT automatically in the Sales Order Header data , TEXT tab page.
    Can Any one tell me how can I remove the text, when i create sales order.
    Or please can any one give me the document or link or explain how the text determination procedure with sales doc type.

    Hi Sanjay,
    Thanks for your help.
    I managed to go there but I am really confused of what changes I have to do there.
    If you dont mind can you explain a bit in detail.
    Sorry for the trouble

  • Text Determination Procedure and Incompletion Procedure

    Hi Every one,
    I want to maintain Two different Text Determination and Incompletion Procedure at Sales Order Header and Item Level.
    Can any one send me the complete cofiguration guide for "Text Determination Procedure and Incompletion Procedure for maintaining two Different Procedures at Header-level and Item Level.
    Please send it on Priority Basis........
    Thanks in advance
    Regards
    Subramanyam

    Hi,
    The fields {Revenue Recognition, Delimit.Start Date, Incompletion Procedure, Partner determination procedure, Text determination procedure and item category statistics grp} which you've mentioned are coming from assignment in spro, so they would remain as it is if you're copying the item category from an existing one...
    I believe you create a new one with the existing one in open in one more session.
    Hope this will help.
    Hrishi

Maybe you are looking for