Normal?

i deleted songs of my ipod touch 5 and know all the album art is messed up how can i fix it

The same behaviour here - but to me it seems quite normal: As the state of your PB is saved to its harddisk it would not make any sense to keep it in Sleep Mode: Without recharging there isn't enough power left to wake it up again.
Completely shutting down at this point will prevent the batteries to get damaged.

Similar Messages

  • Excise invoice is meant for normal exports.

    Hi Gurus,
    In Deemed exports :  While raising ARE-3 its showing the following error message:
    0000000003/2008 excise invoice is meant for normal exports.
    Message no. 4F260
    Please share your ideas to go ahead.
    I have used same excise group but different series group and number ranges for that series group.
    Regards
    Sri

    Maintained number ranges and in J1iin selected expots under bond.
    Its working fine.
    Best Regards
    Sri

  • FireFox 4 Crashes When Started (Both Normal and Safe Mode)

    When I open up FireFox 4 (both in normal mode and safe mode) it crashes within a few seconds. It is a fresh install of FireFox 4 but I also have FireFox 3.6 installed as well. The report that was given is:
    Add-ons: [email protected]:1.0.6,{5F590AA2-1221-4113-A6F4-A4BB62414FAC}:0.45.6.20100202.1, :1.2,[email protected]:1.0rc1,{8545daff-ad1e-493f-a37e-eed1ac79682b}:1.0,[email protected]:6.0,{972ce4c6-7e08-4474-a285-3208198ce6fd}:4.0b1
    BuildID: 20100630141702
    CrashTime: 1279002364
    EMCheckCompatibility: true
    Email: [email protected]
    FramePoisonBase: 00000000f0de0000
    FramePoisonSize: 65536
    InstallTime: 1278990773
    ProductName: Firefox
    ReleaseChannel: beta
    SecondsSinceLastCrash: 38
    StartupTime: 1279002344
    Theme: classic/1.0
    Throttleable: 1
    URL: http://en-us.start3.mozilla.com/firefox?client=firefox-a&rls=org.mozilla:en-US:official
    Vendor: Mozilla
    Version: 4.0b1
    I have Windows 7 32bit

    1. You have a pre-release Beta 1 version of what will become Firefox 4 in like 5 or 6 months. Unless you are intending to test it for flaws and report those flaws to help in the development process, don't use it.
    2. Did you create a new Profile for 4.0b1, and are you using that Profile with it? ''That isn't done automatically when you install 4.0b1, and those of us who have been doing the "testing" for many years consider a new Profile as the basis of doing out testing.''
    [http://support.mozilla.com/en-US/kb/Managing+Profiles]
    IMO, Mozilla is making a huge mistake by directly offering these beta versions to the general public.
    Also IMO. if you want to play with 4.0b1, use the Portable Firefox 4.0beta version to minimize any conflicts with a currently installed version of Firefox, and to eliminate the need for creating a new Profile for 4.0 Beta #:
    Download Firefox Portable Test to your hard drive and double click the '''FirefoxPortableTest_4.0_Beta_#_English.paf.exe''' file. The entire installation (including a new Profile for "Portable") will be self-contained in the \Program Files\FirefoxPortableTest\ folder and won't interfere with an "official" version that you already have installed. Your Profile will be in the \Program Files\FirefoxPortableTest\Data\profile\ folder.
    The "down side" is that Firefox Portable won't launch if any other version of Firefox is already running.
    [http://portableapps.com/apps/internet/firefox_portable/test]

  • Clicking on another app I get the video automatically returning to normal screen view

    I wonder why, if I put a youtube video in full screen and I click on another app WHILE THE VIDEO IS PLAYING all remain this way. On the contrary, if I first stop the video, clicking on another app I get the video automatically returning to normal screen view... This is very annoying. Is it possible to avoid this?
    Thanks

    Sorry, Mozilla doesn't support the patent-encumbered and royalty-encumbered H.264 standard, they support the OGG/Theodora and WebM free open source standards.
    Microsoft has a H.264 plugin for Firefox, but it is for Windows7 not WinXP or Win Vista. <br />
    http://www.interoperabilitybridges.com/html5-extension-for-wmp-plugin
    There may be other H.264 Firefox plugins out there for WinXP, so do a Google search. Or maybe contact support for that DVR security system and see if they know of or have a Firefox plugin.

  • Printing Month View in the Normal 8x11 View

    This was a HUGE problem in the past and hoping it may be better.
    Have never been able to print any of the iCal views in the "tall" 8x11 view. iCal only prints in the "wide" "11x8" view.
    There were a few pain in the neck work-arounds and I am hoping that there may be easier ways to print iCal in the "Normal" views.
    Anyone have any news news on this?
    Jack
    p.s. hopefully 10.5 will fix/upgrade this

    I googled this query and found that the is a glitch for 1 Apr 13. If this date has any 'all day' events it prevents displaying march 13 in month view.
    I amended all my appointments to 20 hour periods to cover the whole day and this alleviated my problem.

  • Normal list view in iTunes 8

    I can see how to switch all the views in iTunes. However when I go to the listing view (one on the left) everything is still grouped with album arts and what not showing in the display window. How can I get to just the normal "list" of songs that I can sort without this? I don't need album arts on the side as it gets annoying scrolling through 15,000 songs that aren't all on albums with art work.
    Is this totally gone?

    It looks like you are stuck in grid mode (middle). I click on list mode and there are all the songs just like before the update. Don't give up this feature wasn't removed it's just a matter of trying to figure out how to get the list button to work for you.

  • Macbook Pro issues - can anyone tell if 'normal' or faults

    I have some issues with my new 15" 2.66 unibody (non-removable batery) MBP. I'm told by the retailer that they are all normal/common - i'd like see if this is actually the case or they fobbing me off.
    1.) Something 'lose' inside the case around hard drive area - ie if i move the mac around (vertically is worst - ie imagine holding it with two hands with hinge sitting downwards, closed) i can hear something fairly hefty clunking back and forth against the inside of the shell (hard drive moving about?)
    2.) When i opn the lid for the first time after a period of the mac being closed, i get a reasonable creak/crack from the left side of the screen hinge.
    3.) When i run the battery down and it goes to sleep 'to preserve the contents of memory' it doesn't take long at all before battery so low it goes into deep sleep (ie state where all RAM contents are written to disk - and then takes a min or so to come to life again when you open the lid - my old macbook pro could last a good few hours in sleep mode before dying completely and deep sleeping
    I'd really like to know if anyone has noticed similar issues with their machines - or if indeed these are isolated issues to a few, aka faults.
    Thanks in advance

    1.) Something 'lose' inside the case around hard drive area - ie if i move the mac around (vertically is worst - ie imagine holding it with two hands with hinge sitting downwards, closed) i can hear something fairly hefty clunking back and forth against the inside of the shell (hard drive moving about?)
    The sudden motion sensor may make the appearance of something bouncing in there as it may activate while the drive is being moved around suddenly. However, if this does not appear to be the case, I'd ask an authorized service center.
    2.) When i opn the lid for the first time after a period of the mac being closed, i get a reasonable creak/crack from the left side of the screen hinge.
    Is the opening range different from other ones in the store?
    3.) When i run the battery down and it goes to sleep 'to preserve the contents of memory' it doesn't take long at all before battery so low it goes into deep sleep (ie state where all RAM contents are written to disk - and then takes a min or so to come to life again when you open the lid - my old macbook pro could last a good few hours in sleep mode before dying completely and deep sleeping
    The battery may need calibration at first:
    http://www.apple.com/batteries/
    If it is calibrated, and you aren't getting the life expected by that link for rudimentary usage, have the power manager looked at.

  • Firefox can't open normally without going through the "this is embarrassing" routine; nor does it close down properly; it also sticks frequently, i.e. screen freezes for a minute or more; should I uninstall and re-install to try and debug?

    Firefox can't open normally without going through the "this is embarrassing" routine; nor does it close down properly; I get the "end program" message and have to say "end now"it also sticks frequently, i.e. screen freezes for a minute or more; should I uninstall and re-install to try and debug?
    - I've used Firefox exclusively for around 2 years.
    - My outlook express has no problems
    - other programs seem unaffected; it seems peculiar to Firefox.
    - my main use is surfing the net, primarily entering competitions on line via specialist competition sites.
    - every day at some stage(s) I have to switch computer off as Firefox has got very slow/sticky/freezes.
    I'm not techy by any means, but I can only thing of un- and re-installing to hopefully start with a clean slate.

    Sounds like something is keeping Firefox from closing properly. See this: <br />
    https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

  • HT1363 Got iTunes 11.0.2 and iPod classic. ITunes no longer connects to iPod - wiped all contents and there is no way to re-connect - is this normal?

    Got iTunes 11.0.2 - as far as I know the latest version. My iPod classic no longer connects - gone through all on the "help" still won't work. There is nowhere with the word "device" and the iPod has now been wiped clean. Is this normal with the new version?

    You might want to try connecting to another computer with an older version of iTunes. If it connects, reformat it straight away just in case before adding your songs back in. Otherwise, you might want to seek for help at the official iTunes stores in your country. Chances are that the iPod might be corrupted, though iTunes being the problem can't be ruled out either.

  • Difference between Free goods and normal items

    Where we have to create free of goods?.Is it in MM or pricing.
    Is it necesssary to stock the free material.
    If free goods also manufacturing in a same plant,how to handle in sales order.Because this item already created in MM

    hi,
    Instead of giving monetary benefits, the company prefers to give the free goods for the customer in the ratio of 1:1 occasionally.
    in standard sap, normal pricing procedure will be assigned to ur sales area Doc. pricing procedure (A) Customer pricing procedure, where as free goods also will be assigning it to ur sales area,but the document pricing procdure will be as C- denotes free goods.
    In sap, the free goods condition type is NA00, and even access seq. also will be Similar to condition type (it's ur wish to maintain like that), and the pricing procedure as NA0000.
    the transaction code for freegoods is VBN1, where u can maintain ur condition records, here there will be a two option.
    1. inclusive and 2. exclusive. maintain the records and save it.
    kindly check the item category TANN, there pricing relevance should be B- free goods.
    u have to maintain the free goods stock in ur plant. (its juz for transaction purpose).
    i hope ur problem will be solved.
    reward points if it is useful.
    regards
    KR

  • My MB is always starting up in safe mode... why? What to do to start-up normally? Please help.

    Hi,
    I am frequently having troubles with my MB. Different types of troubles. Couldn't solve a single one yet.
    I have performed reboot MB in safe mode-- hold down the left shift key after the start up tone till the spinning gear appeared.
    Few hours back i performed that, and since then it just starting up in safe mode without holding the any shift key. I have password protected log-in and each time the dialog box shown the safe mode, not the normal boot as it used to be. I restarted so many times, but same result.
    I started-up by holding down the Option key, dialog box showing the same thing "safe mode" and same result.
    I started-up in single user mode, and then typed reboot, then pressed enter/return button, but dialog box shown the same and it started up in safe mode after entering the password.
    While in the safe mode, i have selected the Mac OS X 10.4.11 from the preference pane, then restarted, but all produced the same result, same dialog box showing the safe mode.
    I couldn't take the screen shot of that dialog box that appears before starting up.
    I am currently using the internet while in safe mode, and using ethernet adapter- a AirStream 1100 F25 external modem attached to the USB port. I don't know if that is good for my MB to use internet on the safe mode.
    I used disk utility and verified the disk during the safe mode, i don't know if that is right or wrong to perform that utility in safe mode, but it all appeared as normal. You can see that from the following image.
    Few days back, i performed the disk utility to verify disk while on the normal boot. But the result shown the red marks, please see the following image for details.
    Hardware Overview:
      Model Name:          MacBook
      Model Identifier:          MacBook2,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache (per processor):          4 MB
      Memory:          1 GB
      Bus Speed:          667 MHz
      Boot ROM Version:          MB21.00A5.B07
      SMC Version:          1.13f3
      Serial Number:          4*********M
      Sudden Motion Sensor:
      State:          Enabled
    BANK 0/DIMM0:
      Size:          512 MB
      Type:          DDR2 SDRAM
      Speed:          667 MHz
      Status:          OK
    BANK 1/DIMM1:
      Size:          512 MB
      Type:          DDR2 SDRAM
      Speed:          667 MHz
      Status:          OK
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          10
      Automatic Restart On Power Loss:          No
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Wake On LAN:          Yes
      Display Sleep Uses Dim:          Yes
      Battery Power:
      System Sleep Timer (Minutes):          5
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          1
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
    Battery Information:
      Battery Installed:          Yes
      First low level warning:          No
      Full Charge Capacity (mAh):          2745
      Remaining Capacity (mAh):          2745
      Amperage (mA):          133
      Voltage (mV):          12575
      Cycle Count:          507
    AC Charger Information:
      Connected:          Yes
      Charging:          No
    Hardware Configuration:
      UPS Installed:          No
    Intel ICH7-M AHCI:
      Vendor:          Intel
      Product:          ICH7-M AHCI
      Speed:          1.5 Gigabit
      Description:          AHCI Version 1.10 Supported
    TOSHIBA MK1234GSX:
      Capacity:          111.79 GB
      Model:          TOSHIBA MK1234GSX
      Revision:          AH008B
      Serial Number:          Z6M7T4FTT
      Native Command Queuing:          Yes
      Queue Depth:          8
      Removable Media:          No
      Detachable Drive:          No
      BSD Name:          disk0
      OS9 Drivers:          No
      S.M.A.R.T. status:          Verified
      Volumes:
    Macintosh HD:
      Capacity:          111.47 GB
      Available:          24.09 GB
      Writable:          Yes
      File System:          Journaled HFS+
      BSD Name:          disk0s2
      Mount Point:          /
    TOSHIBA MK1234GSX:
      Capacity:          111.79 GB
      Model:          TOSHIBA MK1234GSX
      Revision:          AH008B
      Serial Number:          Z6M7T4FTT
      Native Command Queuing:          Yes
      Queue Depth:          8
      Removable Media:          No
      Detachable Drive:          No
      BSD Name:          disk0
      OS9 Drivers:          No
      S.M.A.R.T. status:          Verified
      Volumes:
    Macintosh HD:
      Capacity:          111.47 GB
      Available:          24.09 GB
      Writable:          Yes
      File System:          Journaled HFS+
      BSD Name:          disk0s2
      Mount Point:          /
    System Software Overview:
      System Version:          Mac OS X 10.4.11 (8S2167)
      Kernel Version:          Darwin 8.11.1
      Boot Volume:          Macintosh HD
    Please help me out. Let me know how to start-up normally. By the way, my superdrive is not detecting DVDs including the OS dvds, but it read and write the CDs. So, It is not possible to reinstall OS early, at least not before the having the back up of the data. Please help me with contingency plan/s or as you think fit.
    Thank you. Look forward to your reply.
    <Personal Information Edited by Host> 

    Maximillianmann,
    depending upon how full “almost full” actually is, that could be the problem.
    You can try this, if you have Mac OS X 10.7 or newer installed, to see if it’s not related to your disk being almost full: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Once you hear the startup chime, try booting into Safe mode; does it let you do so now?

  • Macbook Pro will not boot up normally ***Not Normal Problems***

    Ok. I have an older 17" Macbook pro 2.33 (10.6 fully updated) that will not boot up in normal mode. When I boot it shows "blocks" of different colors and will not get past the blue screen sometimes. When it does get passed the the blue or grey screen it is a split screen of white back ground with large black blocks seperating the sides. I have tried swapping out harddrives with a known working one with an OSX image on it-no good. I have tried  swapping out ram-same thing. I reset the SMC and PRAM-only colors changed in the blocks. I have ran disk utilites disk and permisions with no problems. I can't boot into a restore disk using the c key during boot, It locks up at the same screen. Nothing works except safe mode. I can boot into safe mode and everything works just fine with normal screen and all. Now I tried runing the Lion installer thinking it is and driver issue but I can't get Lion to boot to the hard drive and Snow leopard just reboots back to the same screen. So how can I get Lion to install or Snow Leopard?
    What can I do? I noticed this last weekend when I tried to reboot my MB Pro and it started this. Well Apple pushed and update last friday - I needed to restart it again and this happends. I thought it was a logic board at fist until it booted fine in safe mode.

    Sorry. What I mean is I selected the SL boot up in the start up panel and it would not boot into the cd. The CD rom sounds like it just keeps reading with it slowly loading from grey screen to blue screen to the Block screen. Almost like it is booting into normal mode from the hard drive.
    What I can't understand is why it runs fine is Safe mode?
    Also why do I get a " this disk cannot be used to start up your computer" message on my hard drive when trying to install Lion in safe mode? Well why not it's the only hard drive in the computer?
    The first screen shot is the Tech tool showing everything passed the hardware test is safe mode.

  • G770 won't boot normally or in safe mode... I suspect it has something to do with the boot optimizer

    My Lenovo G770 will not boot in normal or safe mode.  I usually escape out of the boot optimizer.  Today I let it run and it went to the "starting windows" screen with a brief startup of the windows 7 animation...it freezes for a second, then a quick flash of the bsod, then to the "windows error recovery page" giving me the option of "starting windows normally" or "Launch Startup Repair (recommended)." 
    Starting Windows Normally eventually brings me back to the same place repeating what I just stated above paragraph.
    When I launch the Startup Repair it "Cannot repair this computer automatically".
    So I go to view advanced options for system recovery and support.
    It brings me to 5 options:
    Startup Repair (we already tried this above)
    System Restore (unfortunately I didn't create any restore points)
    System Image Recovery (unfortunately I haven't created an image to recover)
    Windows Memory Diagnostic (no problems found-done several times)
    Command Prompt (don't know what I can do here except for remove a bad/corrupted driver which may be the problem, but I don't know the driver name that is associated with the boot optimizer...can anyone tell me this?)
    I've tried booting to safe mode in all of its incarnations and I can't even do that..it repeats the same things as stated above...windows 7 animation briefly starts then locks up, flash of bsod, then the windows error recovery page.
    I've tried booting to last known good configuration (same thing occurs...brief startup of windows 7 animation, freeze, flash of bsod, then error recovery page.
    The only thing that has given me any kind of result was "disabling system restart on system failure."  When I do this, the BSOD doesn't flash briefly..it stays. and it gives me the error message page_fault_in_nonpaged_area.
    I'm at a loss as to what to do.  Not being able to boot into Safe Mode even is really frustrating.  Any advice from anyone?  can I remove the driver associated with the boot optimizer?  If so, what is the name of the driver and where (directory) is it located? 

    How did you resolve the issue?
    I have the exactly same issue.
    When I go System Image Recovery -->Select System Image-->Advanced->I can open all the drives [:Local Drive(C , LENOVO(D, Local Disk(E, Boot(X-where i think executable booting is here]. It comes with an Open prompt asking me to enter File Name with a File type: Setup Information.
    I don't know which setup information and where to find it on my Drives.
    Anyone know how to fix?
    I was trying to re-install Win 7 from DVD but it is not executing either.
    Can I boot with USB Ubuntu and Install Win 7 from there??? but how?
    Need help?

  • New install of Horizon 6.1. It's normal that provisioning linked-clones will take a long time ?

    Hi,
    First, I will describe my installation :
    1 Management Server : Dell PowerEdge R730 48 cores, 2.5 Ghz with 9 HDD 300 GB SAS 15K (RAID 5) and 256 Gb RAM
    2 VDI Hosts server : Dell PowerEdge R730 48 cores, 2.5 Ghz with 9 HDD 300 GB SAS 15K (RAID 5) + 1 SSD 200 GB, 256 Gb RAM, 2 grid K1 cards
    1 LUN on an Dell Equallogic PS6110X (750 GB) where I put the masters.
    1 switch Dell N4032F (10 Gb)
    All server will have 4 ports 10Gb configured with NPAR (so, i have 6 x 10 Gb virtual nic for the storage and 6 virtual nic for the VM network) and 2 ports 1 Gb for the management.
    My master :  Windows 7 SP1 x86 optimized with 24 Go HDD Thin-Provisionned (2 vCPU, 2 Go RAM, VMXNET 3 network cards). There is none added application on this master.
    I can't apply the Microsoft patch for VMXNET 3 because it says that this patch is not applicable.
    I don't have VSAN because only 2 VDI hosts, so I configure my pool for each hosts with local storage for the linked clones and local SSD for the replica.
    When I run the provisionning of the desktop pool (17 VM):
    The clone of the replica (Equallogic ==> local SSD) will take 2'30".... That's good for me (113 MB/s... the Equallogic is also used for another server storage on other LUN)
    But the rest of all operation to finish the provisionning will take 40'.
    More than 50% of cores will mount to 100% CPU on the host.
    I have tried to change my RAID5 (9 hard disk + 1 spare) to RAID10 (10 HDD). It take 50'.
    And, when all operations are finished... I have 2 or 3 VM with the message : Agent Unreachable and 1 or 2 hangs on Provisionning.
    A recompose a one VM Desktop will take approximatively 1'30.
    My question : it's normal that the provisioning will take so much time ?
    And other question : when i'm connected to a VM Desktop with Horizon client during a pool provisioning, the VM freeze or i simply can't connect. Even if i have ready desktop. And sometimes, vCenter client will freeze to a lot of seconds during provisioning
    Have someone idea ?
    PS : Sorry for my approximate English ;-)

    Today, i have try to put the RAID in RAID 0.
    Result : always 50 minutes for provisioning.
    So, the problem is not the RAID...
    In vRealize Operation Manager, I see that i have latency in disk command and disk operation (up to 7000 ms !!!!).
    And in vCenter performance (all type of performance), I have a lot of blank graphics during 5 to 20 seconds in different steps.
    I don't know where were looking my problem...
    Any idea ?

  • Nowhere to type file name in save as dialog, is this normal . . .

    Hello;
    here's the problem;
    I'm having some problems with my main worksation and I'm going to probably rebuild it from scratch
    (HDD problem & an AVG Baked registry & network stack)
    so I've started by installing AA 2.0 (Full) onto one of  my backup systems
    & will follow with AA3.0 (Upgrade) if I can verify that the system can do the job for me
    here's the problem;
    I installed AA2.0 which is needed to get AA3.0(upgrade) to install
    but I haven't activated or registered yet because I don't want to waste any activations
    if I can't use the system
    is it normal for the save as dialog to not have a place to type a file name when AA isn't activated?
    System:
    HP/Compaq DC7600
    P4HT enabled 3.2GHz
    2GB DDR2 533MHz RAM
    Lots of HDD Space on 5 HDDs
    sidebar:
    why is my insertion point moved all over the page while I type this in firefox?

    thanks for the reply:
    don't know if this some sort of a display redraw issue:
    but if I just hit enter I get the file saved as untitled.wav (which is floating in the middle of the screen not in the correct location)
    and the file ends up in "My Music Folder" (which I never use, but can't change folders either)
    -good grief I hate M$ for their My . . . crap folders
    the system is using similar Intel-GMA integrated graphics as my main workstation
    the only difference is processors and the chipset is one generation back
    my main workstation has 965ry and the backup has 945g

  • I've installed CS6 and web Premium on a Mac running 10.9.5, and Dreamweaver,Flash and Illustrator wont launch.  All other components work normally.  In Activity monitor it says Adobe switchboard failed to respond.  Can anyone help solve this issue?

    I've installed CS6 and web Premium on a Mac running 10.9.5, and Dreamweaver,Flash and Illustrator wont launch.  All other components work normally.  In Activity monitor it says Adobe switchboard failed to respond.  Can anyone help solve this issue?

    Release: 4/25/2012
    http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx

Maybe you are looking for

  • Binding UINamingContainer to f:subview

    Hello again, till now I have added all dynamic created components from my bean to a HtmlPanelGrid and used <h:panelGrid binding="#{loginBean.mainMenu}" />to bind them to my page. But now i must not use a Form because the menu should be in a DIV and b

  • Has anyone got cn8202temp_controller.vi to work?

    Hello, Has anyone got cn8202temp_controller.vi to work. I got it from the Ni website and I've been unable to get it to run right. If there is anyone out there that has got it to work please tell me how you did it. It has an error when you upload

  • Setup Logical System from blank

    the default logical system of client 100 is blank now we have to set a logical system for ALE and BW data transfer but we found that some documents will not be transfer and some document cound not be found eg: we cant found the FI documents from mate

  • Web services and RMI

    Hi, I have a question about the scalability of RMI with Oracle JVM. What we intend to do is have about 10 SOAP webservices all interacting with our Oracle 8i instance. One of the developers suggestion is to use the Sun Java/SOAP Toolkit to make the W

  • Download on purchased item did not finish

    i recently purchased an album that contained bonus material(videos) ...when the download was almost finished, an error occured and itunes was no longer responding and my computer closed the program...two of the videos(bonus material) did not finish d