Not able to access Oracle 10g XE database home page on Windows XP?

I wanted to practise pl/sql in my office pc. I installed Oracle 10g XE on my machine and after that I also started Agent from Services. However When i clicked on Database home page it doesn't start. Changing network configuration might create problem in network. Can anybody help me working out this problem or has any alternative to practise PL/SQL with tiny oracle database.
Regards
Manish
Edited by: user11003855 on Apr 19, 2009 11:27 PM

Did you configure loopback adapter?
:p

Similar Messages

Limited account users not able to access oracle 9.2 database

I have installed oracle 9.2 database on windows server 2003 enterprise, I am having 35 users that login through terminal server to use a application developed in VB6 and uses oracle database, Now if I put all users in administrator group of 2003 everything is working OK , but if I remove them from administrator group they receive the following error after starting the application
"Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed."
I dont want these users in administrator group as this can be a risk for my setup,but unfortunately I until have no solution for this rahter then keeping them in Administator group.
Any Help will be greatly appreciated.
Tahnks

On the client terminals, you need to install Oralce client software to make sure that the clients and server can communicate. Have you installed it? How the clients are connecting to the database, by some tnsnames or in your application, are you using some DSN or something which is using some tnsnames entry?
HTH
Aman....

Not able to access the Oracle9i wireless edition home page

We are getting the following error when trying to access the personalization portal(By typing http://<hostname:port>/portal/Login.jsp) on Oracle9i wireless edition.
Error:
The requested URL /servlets/oracle.jsp.JspServlet was not found on this server.
Can anyone please help me with the solution

Make sure the panama.zip, panama_core.zip , panama_pasm.zip are in the wrapper.classpath in the jserv.properties file. Also cross with the installation guide and verify all the mentioned paths are in wrapper.classpath
Hope this helps,
Ranganathan
[email protected]
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by ravi gitta:
We are getting the following error when trying to access the personalization portal(By typing http://<hostname:port>/portal/Login.jsp) on Oracle9i wireless edition.
Error:
The requested URL /servlets/oracle.jsp.JspServlet was not found on this server.
Can anyone please help me with the solution<HR></BLOCKQUOTE>
null

Can we access Oracle 10g R2 database from Oracle 11g Client

Hi,
Can any1 tell me can we access Oracle 10g R2 database from Oracle 11g Client ? I m unable to find a Oracle Client 10g R2 for Windows 7 32 bit.
Below link is for Vista only
http://www.oracle.com/technetwork/database/10203vista-087538.html

832812 wrote:
Hi,
Can any1 tell me can we access Oracle 10g R2 database from Oracle 11g Client ? I m unable to find a Oracle Client 10g R2 for Windows 7 32 bit.
Below link is for Vista only
http://www.oracle.com/technetwork/database/10203vista-087538.html
Check this note for client/server compatibility
Client / Server / Interoperability Support Between Different Oracle Versions [ID 207303.1]

Database Could not able to (install Oracle 10G)

Dear all,
I had tried to install Oracle 10G using sapserver.cmd. but i didnt get dos Box even i didnt get any screen after Double click sapserver.cmd .
but if i tried this path SAPDVD/Ora_RDBMS/NT/I386/database/setup . i can install Oracle RDBMS.
I need to know whether above mentioned path is adviseable to install Oracle 10G
Kindly suggest
Regards

Hi Marcus ,
I have tried from command line also. I got the below error .
D:\>cd D:\Ora_RDBMS\NT\I386
D:\Ora_RDBMS\NT\I386>sapcustom.cmd
'D:\Ora_RDBMS\NT\I386
database\install\SETUP.EXE' is not recognized as an inter
nal or external command,
operable program or batch file.
D:\Ora_RDBMS\NT\I386>sapcustom.cmd
Kindly suggest .
Regards

Not able to install Oracle 10g on Windows Vista Home Premium

Hi All.
I bought new Laptop preinstalled with Windows vista Home premium. I tried to install Oracle 10g , but it failed.
Error: Oracle 10g doesn't support vista sp5. Should be less than sp5.
Can anybody suggest me, which version of Oracle supports Windows Vista HomePremium?

hi ,
please follow up the below link,
oracle 10g r1 is not supported for vista , but you can put the vista in the xp compatible mode , and then install it...
http://www.psoug.org/reference/vista.html
regards,
Mohammed Mehraj Hussain

Not able to install Oracle 10g Express on linux 64bit based on Dude's intr

I followed "https://forums.oracle.com/forums/thread.jspa?threadID=2200434" to install oracle 10g xe on Ubuntu 10.10 AMD 64-bit
but I ran into below error while I was trying to install 10g XE on linux 64bit
root@vdevluxcnhz0021:~# dpkg -i force-architecture libaio_0.3.104-1_i386.deb --------- this step is error
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
dpkg: regarding libaio_0.3.104-1_i386.deb containing libaio:
libaio1 conflicts with libaio
libaio (version 0.3.104-1) is to be installed.
dpkg: error processing libaio_0.3.104-1_i386.deb (--install):
conflicting packages - not installing libaio
Errors were encountered while processing:
libaio_0.3.104-1_i386.deb
Linux version
root@vdevluxcnhz0021:~# cat /etc/issue
Ubuntu 10.04.2 LTS \n \l
root@vdevluxcnhz0021:~# cat /proc/version
Linux version 2.6.32-28-server (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #55-Ubuntu SMP Mon Jan 10 23:57:16 UTC 2011
Can you please help on this?
Thanks
Edited by: user1997872 on Jan 4, 2012 7:07 AM

It looks like you will have to uninstall "libaio1", but I don't know for sure and don't have Ubuntu 10.4 available right now to play with.
Sorry but the instructions are for Ubuntu 10.10, not 10.4, which is different.
If you need to install XE on Ubuntu, I'd rather suggest 11gR2 XE:
Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 how-to
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto

Oracle DB 10g XE Database Home Page login failure

Hi,
I've just successfully installed Oracle DB 10g XE on WIN2KPRO SP4.
I can connect to the Oracle DB using Toad for Oracle. So the System user and password entered during setup work.
However if I open the DB home page and try to log in with the same details, the login process fails. Why?
Help is appreciated. Thanks.
Ovidiu

I have the sma eproblem. IN my case, I cant even see a page, I get the blank dns error screen. I am able to conect to databse usign SQL window.
While trying this several times, I uninstalled the 10G express and tired to download the 9i. In this case I am getting unusal error as well. Even after chekcingteh agree to Oracles policy etc, I get an errro that sorry you cant download the files. You have to agree to oracle downlaod policy.
9
I am not sure why this is happening and what can be done. But i think the same thing is happenign with 10G as well(the username etc is nto being taken)

I can't start the database home page in windows xp

I installed oracle in my windows xp pc but when i try to start the database home it opens an internet explorer windows with the address http://127.0.0.1:8080/apex and they cant find the page please, can somebody help me with tis problem.

Okay, so what fixed this for me...
Wasn't able to get to the fourms but was able to peice together what to do from doing google searches and reading the breif summery. Lucky for me I was able to try a few things and hit the sweet spot.
Symptoms for me...
Not able to use administration web page. http://127.0.0.1:8080/apex
Noticed that the listener service was not listening on port 8080
The services start but you are not able to get to the web page for administraton.
Solution for me...
Uninstall Oracle 10g Express Editon
Re-install Oracle 10g Express Editon using the local administrator.
That's it!
I was installing the application using a domain account. Even though the domain account was in a domain group that was part of the local administrators group for the workstation the install wouldn't work completely.
Message was edited by:
user523004
Message was edited by:
user523004

Not able to install Oracle 10g on Windows 7 Ultimate

Dear Oracle Xperts,
Can anyone guide me how to go about installing on Windows 7. I downloaded the 10.2.0.3 version. Its not installaing throwing the following error.
Checking operating system requirements ...
Expected result: One of 5.0,5.1,5.2,6.0
Actual Result: 6.1
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
=======================================================================
Checking service pack requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'Windows Vista Version 6.1' is not supported.
Recommendation: Install the recommended Service Pack.
=======================================================================
Checking physical memory requirements ...
Expected result: 256MB
Actual Result: 1406MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
I also installed the MS Loopback adapter.
Pls help me with any feedback
Thks and regards,
Indranil

Hi Srini,
Thank you very much for the direct link to that article. I've been trying to find it since Googling similar questions, all of which suggest going to My Oracle Support to get that article. Unfortunately when I went there I got prompted for contract ids or whatever, so the portal seems completely useless to the general public.
In my case, some machines would install on Windows 7 and some wouldn't because the CertifiedVersions prerequisite check would come back with either 5.1 (incorrect version, but allows installation) or 6.1 (correct version, but aborts installation). How a 5.1 could get returned for the Windows 7 version number is beyond me, but that was the issue.
The fix is that the -ignoreSysPreregs flag doesn't help in the product-specific prerequisites section. You need to specify the -ignorePrereq flag as the article shows instead - however if you run setup -help that flag isn't listed as an option! I do thank you very much for ending my frustration.

Not able to access the 10g RAC DB

Hi All,
I have installed 10G RAC on WIN2K box with 2 nodes. The installation was fine. I created a database with name "test". It created 2 instances "test1 on node1" and "test2 on node2". Now if i am trying to connect to "test", it fails. but if i use "test1" i am able to connect. How does the failover come into picture when i am using the instance "test1" which is running on node1 and it(node1) goes down. I am new to these, please help me.
Thanks in advance
Regards
Kavitha

All connections should be using the failover TNS entry which should look something like this in your tnsnames.ora file:
TEST=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=test1-vip.us.oracle.com)(PORT=1521))
(ADDRESS=(PROTOCOL=tcp)(HOST=test2-vip.us.oracle.com)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=TEST)
When you do a tnsping of the service, you should see the failover configuration, similar to:
tnsping TEST
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=test1-vip.us.oracle.com)(PORT=1521)) (ADDRESS=(PROTOCOL=tcp)(HOST=test2-vip.us.oracle.com)(PORT=1521)) (CONNECT_DATA= (SERVICE_NAME=TEST)))
There are many different configurations for RAC failover and TAF. This is a basic example.
Marg.

Not Able to connect jdev 10g application database, after deployee to weblogic 10g

Hi,
I have and application build in developer 10g.(10.1.3.5) using ADF business component 10.1.3.43.6. i want deploy this application in web logic serve 10.3.4
After install ADF runtime my application was successfull deployed in web logic , But is not abble to connect with oracle database.
I get this line of error in web logic console: java.lang.ClassNotFoundException: oracle.jbo.domain.BlobDomain.
Any advise about this.
Thanks ervin.

oracle.jbo.domain.BlobDomain is not a WebLogic class, let alone
a WebLogic JDBC issue, so you need not do any DS reconfiguration...
You need to find out where the oracle.jbo classes are, and get them
into the WebLogic class path...

Not able to install Oracle 10G on AIX 5.3 64-bit system

Hi,
i have got the software in DVD i have mounted the dvd on the filesystem
/dev/cd0 ---- /mnt (mnt folder contains the software), Have done following things to install but got following errors....
#cd mnt
# ls
client companio doc index welcome.htm
clusterw database gateways index.pdx
$cd database
# ls
doc install response rootpre runinsta stage welcome.htm
#cd rootpre
loadext orclclus pw_sysc2 pw_sysc3 pw_sysca rootpre.sh
# ./rootpre.sh
Required file ./pw-syscall32 is missing.
Aborting pre-installation procedure. Installations of Oracle may fail. // wat does this mean is that file belongs to operating system or missing in the source DVD
# /mnt/database/runinsta
Your platform requires the root user to perform certain pre-installation
OS preparation. The root user should run the shell script 'rootpre.sh' be
fore
you proceed with Oracle installation. rootpre.sh can be found at the top
level
of the CD or the stage area.
Answer 'y' if root has run 'rootpre.sh' so you can proceed with Oracle
installation.
Answer 'n' to abort installation and then ask root to run 'rootpre.sh'.
Has 'rootpre.sh' been run by root? [y/n] (n)
y
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-06-04_12-20-58PM. Please wait ...
Error in writing to directory /tmp/OraInstall2007-06-04_12-20-58PM. Please ensure that this directory is writa
ble and has atleast 69 MB of disk space. Installation cannot continue.
: Error 0
//////// I checked that in tmp folder i have got more than 69MB (i have 2 Gb )
/////// also created folder /u01/app/oracle and mounted in seperate volume which has
/////// 7GB space...
# cd ..
# cd install
# ls
addnode.sh images oneclick.pro .oui response unzip
clusterp.ini lsnodes oraparam.ini resource runinsta.sh
# ./runinsta.sh
./runinsta.sh[3]: ./runInstaller: not found.
Any Help would be appreciated.... struggling to install it.
Thanks & Regards
Bhanu

Hi,
I'm also facing some issues with respect to installation.
The oracle installer is getting started but the GUI screen is
not appearing.The installer is getting stuck with the following error
message.
INFO: Created system preferences directory in java.home".
I also tried starting utilities like xclock which is also not getting started.
Any suggestions would be really appreciated.
Regards,
Mahesh.

Not able to install Oracle Client 11g R2 64 bit on Windows 7 Enterprise 64

I am having issues. I get "Central Inventory is not locked" and Oracle 11g R2 just closes itself.
I had some previous installations of Oracle, but I am unsure how to get rid of them all. I already removed the registry keys associated with Oracle. Any help here?

One user above reported installing the 64 bit odbc drivers and then the 32 bit drivers. How did you do that? I'm a neophyte to this.
I'm trying to get a 32 bit ODBC oracle driver to work on a server 2008 R2 machine. I downloaded the 11gR2 x64 client from oracle. The install process makes no mention of 32bit vs 64bit installation. After running the instalation I can run the ODBC administrator and generate a DSN for oracle. When I run the 32 ODBC administrator there is no oracle driver available except the microsoft driver for oracle. When I select that it says that I need to install oracle.
I had at first tried to install 11g instant client. However that didn't work for the 2008 R2 machine. It complained about some registry error when I tried to run the ODBC install program. I need to get it to work for a customer asap.

I do not see the Go To Database Home Page selection.

I do not see the Go To Database Home Page selection.
1 Logging in as the Database Administrator
The first thing you need to do is to log in as the Oracle Database XE
Administrator. Follow these steps:
1. Open the Database Home Page login window:
■ On Windows, from the Start menu, select Programs (or All Programs),
then Oracle Database 10g Express Edition, and then Go To Database
Home Page.
■ On Linux, click the Application menu (on Gnome) or the K menu (on
KDE), then point to Oracle Database 10g Express Edition, and then Go
To Database Home Page.
2. At the Database Home Page login window, enter the following information:
■ Username: Enter system for the user name.
■ Password: Enter the password that was specified when Oracle Database
XE was installed.
3. Click Login.
The Oracle Database XE home page appears.

That is really strange, actually the go to database homepage is going to the application express home page,
http://peterzyw.spaces.live.com/photos/cns!DF2188D6F941C9F9!918/
If you really cannot see this option, you can try to type the URL of apex and access it
http://localhost:port/apex
http://localhost:8080/apex
The go to database homepage menu option should be below the "Run SQL Command Line" .

Not able to access Oracle 10g XE database home page on Windows XP?

Similar Messages

Maybe you are looking for