Not able to cancel the indexing job in BO Explorer.

Not able to cancel the indexing job in BO Explorer. When I clicked Cancel Indexing, Its still in processing mode. Please advise. Thanks!!

Thanks Henry. Actually Indexing server was down, So it was not getting cancelled. I restarted the Explorer services and it worked fine afterwards.
However, Could you please also let me know if there's any way in Explorer to show description of the Dimension/Measure Objects while exploring data in any information view.
I have defined the object's descriptions in my underlying universe and they are also while confirguring the information space. But I am not able to see the while exploring data.
Could you please advise on this. Thanks!!

Similar Messages

  • Not able to cancel the Credit Note due to "Net Value could not be 0" error

    Hi Gurus
    We have created the Credit Memo Request with ref. to invoice and PGR , and  against that Credit Memo Request entered Credit Note .
    Credit Note is showing 0 Net Value and no accounting document generated .
    Further system is not allowing to cancel the billing document i.e. credit note .
    Pls. Suggest how can we cancel the billing document i.e. credit note and recreate it.
    Regds
    PR

    I wrote that system is not allowing us to create the cancel document with 0 net value.
    I need to cancel this document , so that i can recreate new one.
    Regards
    PR

  • Not able to cancel the Excise invoice for STO process

    Hi All,
    In  STO process, we need to cancel the excise invoice due to some business requirement. When we tried to do the same in J1IH, it is not allowing us to do the same with the error "No item information transferred into Accounting". Tried the same through J1IS with the internal Doc No. Here the error is document is complete.
    Please guide how to cancel the same.

    Hi,
    STO has been created either through MM route or through SD-MM route.
    In MM route, the process is as below,
    You create PO, followed by MB1B (Transfer posting) , then followed by J1IS (Excise Invoice).
    In SD-MM route the process is as below,
    You create PO, followed by VL10B , then VF01, then followed by J1IIN (Excise Invoice from Factory).
    Normally, when you create Excise Invoice through J1IIN, it is automatically released to Accounting.
    In your case, I feel it has not yet been released to accounting and I hope, Excise Invoice has been created through J1IS.
    In MM route, you need to release the Excise doc to Accounting.
    In that case, you need to go for J1IV and release the same to accounting.
    Find out the Internal document number from the Excise Invoice and with the reference of this Internal document number release it to Accounting through t.code J1IV.
    Now, once it is released to accounting, you should be able to cancel it through J1IH or J1IS.
    Please let me know if any further problem you are facing.
    Regards
    Pradyumna

  • Not able to post the invoice cancel MR8M document

    Dear All,
    I am not able to cancell the invoice document using MR8M transaction. System is showing the message as "balance not zero, difference between debits & credits"
    Invoice document is created in the FY 2006 as a credit memo, and now i want to reverse/ cancel it by using MR8M transaction.
    Pl. let me know the possibilities & checks required for cancellation of it.
    Regards
    Mangesh

    hi,
    2006 documents cannot be reversed now since the posting period will be closed.
    I think there is no solution. the only solution is
    If the vendor is  live and supplying any material adjust against them.
    G.Ganesh Kumar

  • Cancel the Backgrounf job

    Hi Experts,
    i have to cancel the Backgrounf job which is active and Running. i am getting this active job from  TBTCO table and using FM "BP_ABORT_JOB' and i am passing ' Job coun' and Job name' but too i am not able to cancel the back ground job. Please suggest me how to do this or any other Fm by which we can cancel the active background job?>.
    Please help on the same.
    mahesh

    Check program RSBTCDEL
    You can call it using the job name
    similar question for reference How to cancel the background job processing in ABAP programming?
    Edited by: Keshav.T on May 3, 2010 2:52 PM

  • Not able to run the SSIS package in SQL Server Agent Job in SQL 2012

    Hi,
    I scheduled a job (SQL SERVER AGENT) which will call my SSIS package. This package will execute 5 packages in loop.
    When I execute this job I am getting error as below
    ============================================================
    Started  : 12:30:19 PM 
    Error  : 2014-01-23 12:30:20.37    
    Code  : 0xC00220EC    
    Source  : Execute Package Task     
    Description : Error 0x80070005. Failed to create an instance of empty child package.
        The Distributed Component Object Model (DCOM) configuration or the installation of SQL Server Integration Services,
        may be corrupted on your machine.  End Error 
    Error  : 2014-01-23 12:30:20.37    
    Code  : 0xC00220DE    
    Source  : Execute Package Task     
    Description : Error 0x80070005 while loading package file "D:\SSIS\RetailMobileApp\Staging_Pkg\stg_Category_Master.dtsx". Access is denied.End Error 
    DTExec  : The package execution returned DTSER_FAILURE (1). 
    Started  : 12:30:19 PM 
    Finished : 12:30:20 PM 
    Elapsed  : 1.123 seconds. 
    The package execution failed. 
    The step failed.
    ============================================================
    In the STEPS I have selected as follows:
    Type  : SQL Server Integration Services Package
    Run as: SQL Server Agent Service Account
    Package Source: File System
    What config I need to check here ? This job is not able to access the package stored in the folder.
    Sridhar

    Thanks for your reply. I had created credentials and used this while creating the Proxy account. With the Proxy account I am able to execute the Job Successfully. Concern here is I used my NT account to create this Proxy. Suppose If I left from the
    current project if some one is coming to this project later they need to change the credential with their NT account and run the JOB? Is this right way or we an create any other account in common? If so how?
    Sridhar

  • Not able to edit the Debit memo request after cancelling Billing document

    Hi,
    This is a process in SD/Customer service.The issue is even after cancelling the billing document we are not able to edit the item details in debit memo request..Pls suggest how we can edit the item details after cancelling the billing document
    Best Regards
    Jay

    Hi Jay,
    Yes, the whole sales document could not be deleted as well.
    Sorry for the misleading answer.
    As per the long text of error V1006, the document cannot be completely
    deleted because further processing has already taken place. Even though
    you have cancelled the subsequent documents, if you refer to the
    document flow, the subsequent documents might have already been created
    The cancellation of these does not delete the request.
    Please have a look at table VBFA in transaction SE16 and you can see
    that the subsequence documents are still displayed.
    What you can do is to enter a reason of rejection for all items to
    prevent further processing of the request.
    Please refer to Note 147028, you don't need to apply
    this note, please refer to part of "NOTE:...".This is a restriction
    of the system.
    For order-related billing, it is not possible to delete the sales
    document, even if the subsequent invoice has been cancelled.
    You have to reject the items.
    Cheers,
    Alex

  • Not able to cancel membership

    Not able to cancel membership using Manage Plan option.
    cancel plan option not showing in the page

    This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
    -start here https://forums.adobe.com/thread/1703848
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
    --and two links which may provide more details, if the above links don't help you
    -http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  • I am not able to see the valeus in the report on multiprovider.

    Hi Gurus,
    I have loaded an infoobject Document currency0DOC_CURRCY into DSO and assigned a constant "USD" to it and I am able to see that value in DSO through the display data.
    Later I moved the DSO into multiprovider by loading the 0DOC_CURRCY in to multiprovider and wrote a query on it.
    But I am not able to see the values for 0DOC_CURRCY in the report.
    Why I am not able to see the valeus in the report which is executing on the multiprovider.
    PLs help me with a solution.

    Hi,
    First step is to checck the data in the ODS.
    Second is, You use Identify Characteristics and Select Key Figures to make InfoObject assignments between MultiProviders and InfoProviders.
    If this is checked you 70 % of the job is Over in your creating multiprovider.
    For more information
    http://help.sap.com/saphelp_sm40/helpdata/en/cf/bc734190ba137de10000000a155106/content.htms
    santosh

  • Not able to update the project using 'BAPI_PROJECT_MAINTAIN'.

    I  want to create a project , with reference to an already existing project.
    I am using 'BAPI_PROJECT_GETINFO' to get the data of the existing project.
      The bapi gives the following:
    1)     e_project_definition.
    2)     e_wbs_element_table.
    3)     e_wbs_hierarchie_table
    I am passing the u2018e_project_definitionu2019 to 'BAPI_PROJECTDEF_CREATE' to create project.The project is created successfully.
    But I am not able to update the project with u2018e_wbs_element_tableu2019
    and u2018e_wbs_hierarchie_tableu2019. I am using 'BAPI_PROJECT_MAINTAIN' to update the project.
    The program is not giving an error, but it is also not updating the E_WBS_ELEMENT_TABLE and E_WBS_HIERARCHIE_TABLE.
    I am attaching the code below.
    *& Report  ZTEST_PC.
    DATA: project_definition   TYPE  bapipr-project_definition,
          with_activities      TYPE  bapipr-with_activities,
          with_milestones      TYPE  bapipr-with_milestones,
          with_subtree         TYPE  bapipr-with_subtree,
          e_project_definition TYPE  bapi_project_definition_ex,
          return               TYPE  bapireturn1.
    DATA: i_wbs_element_table         TYPE TABLE OF     bapi_wbs_elements,
          e_wbs_element_table         TYPE TABLE OF     bapi_wbs_element_exp,
          e_wbs_milestone_table   TYPE TABLE OF bapi_wbs_milestone_exp,
          e_wbs_hierarchie_table  TYPE TABLE OF bapi_wbs_hierarchie,
          e_activity_table        TYPE TABLE OF bapi_network_activity_exp,
          e_message_table         TYPE TABLE OF bapi_meth_message.
    DATA: wa_wbs_element_table    TYPE      bapi_wbs_element_exp,
          wa_wbs_hierarchie_table TYPE  bapi_wbs_hierarchie.
    DATA: l_new_proj_no TYPE  prpss-posid.
    DATA: l_project_definition        TYPE  bapi_project_definition.
    DATA: l_project_definition_upd    TYPE  bapi_project_definition_up.
    DATA: l_project_definition_stru   TYPE  bapi_project_definition.
    DATA :l_pspnr      TYPE ps_intnr,
          l_pspid      TYPE ps_pspid,
          l_pro_def(9) TYPE c.
    DATA :l_proj  TYPE proj.
    DATA :l_len TYPE i VALUE '0'.
    DATA: lt_dd03l TYPE TABLE OF dd03l,
          ls_dd03l TYPE dd03l.
    DATA: fieldname(50), fieldname1(50) TYPE c.
    DATA: p_ddic_name(40), struc(40), fun_struc(50) TYPE c.
    FIELD-SYMBOLS: <struc>, <c>, <sc>, <def_field> TYPE any.
    DATA : i_method_project    TYPE TABLE OF bapi_method_project,
           wa_method_project   TYPE  bapi_method_project.
    DATA : l_index TYPE bapi_method_project-refnumber.
    DATA : it_wbs_element_table         TYPE TABLE OF bapi_wbs_element,
           it_wbs_hierarchie_table      TYPE TABLE OF bapi_wbs_hierarchie.
    DATA : wl_wbs_element_table         TYPE bapi_wbs_element,
           wl_wbs_hierarchie_table      TYPE bapi_wbs_hierarchie.
    DATA : l_wbs_element_table_update   TYPE bapi_wbs_element_update.
    DATA : i_wbs_element_table_update   TYPE TABLE OF bapi_wbs_element_update.
    Get the project info of the Project 'C01.10995'
    CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
      EXPORTING
        input  = 'C01.10995'
      IMPORTING
        output = project_definition.
    CALL FUNCTION 'BAPI_PROJECT_GETINFO'
      EXPORTING
        project_definition     = project_definition
      IMPORTING
        e_project_definition   = e_project_definition
        return                 = return
      TABLES
        i_wbs_element_table    = i_wbs_element_table
        e_wbs_element_table    = e_wbs_element_table
        e_wbs_milestone_table  = e_wbs_milestone_table
        e_wbs_hierarchie_table = e_wbs_hierarchie_table
        e_activity_table       = e_activity_table
        e_message_table        = e_message_table.
    Automate the process the process to get the next number for the func module 'CN_SUCHE_FREIE_NUMMER'.
    CLEAR : l_pspnr, l_pspnr, l_pspid, l_pro_def.
    SELECT MAX( pspnr ) FROM proj INTO l_pspnr.
    SELECT SINGLE * FROM proj INTO l_proj WHERE pspnr EQ l_pspnr.
    l_pspid = l_proj-pspid.
    CALL FUNCTION 'CONVERSION_EXIT_ABPSN_OUTPUT'
      EXPORTING
        input  = l_pspid
      IMPORTING
        output = l_pspid.
    l_pro_def = l_pspid+4(5) + 1.
    CONDENSE l_pro_def.
    CONCATENATE 'C01.' l_pro_def INTO l_pspid .
    function module to generate the nect free number between the given range.
    CALL FUNCTION 'CN_SUCHE_FREIE_NUMMER'
      EXPORTING
        search_imp = '2'
        prps_s_imp = l_pspid
        prps_e_imp = 'C01.29999'
        no_dialog  = 'X'
      IMPORTING
        prps_exp   = l_new_proj_no.
    IF sy-subrc <> 0.
      EXIT.
    ENDIF.
    Update the fields of 'l_project_definition_upd' as 'X' for the fields which has values in 'E_PROJECT_DEFINITION'.
    Get the New Project Number.
    MOVE-CORRESPONDING e_project_definition TO l_project_definition.
    l_project_definition-project_definition = l_project_definition-project_definition+0(3).
    l_new_proj_no = l_new_proj_no+4(5).
    CONCATENATE l_project_definition-project_definition '.' l_new_proj_no INTO l_project_definition-project_definition.
    TRANSLATE l_project_definition-project_definition TO UPPER CASE.
    MOVE-CORRESPONDING l_project_definition TO l_project_definition_stru.
    Create the New project with the New project Number.
    CALL FUNCTION 'BAPI_PROJECTDEF_CREATE'
      EXPORTING
        project_definition_stru = l_project_definition_stru.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        wait = ' '.
    Populate internal table i_method_project for the bapi_project_maintain func module.
    CLEAR : wa_wbs_element_table,wl_wbs_element_table,wa_wbs_hierarchie_table,
            wl_wbs_hierarchie_table, it_wbs_element_table, it_wbs_hierarchie_table.
    CLEAR : wa_method_project, i_method_project, l_index .
    l_index = 0.
    LOOP AT e_wbs_element_table INTO wa_wbs_element_table.
      MOVE-CORRESPONDING wa_wbs_element_table TO wl_wbs_element_table .
      APPEND  wl_wbs_element_table  TO it_wbs_element_table .
      wa_method_project-objecttype = 'WBS_ELEMENT'.
      wa_method_project-method     = 'CREATE'.
      wa_method_project-objectkey  = wa_wbs_element_table-wbs_element.
      l_len = strlen( wa_wbs_element_table-wbs_element ).
    Setting Levels as reference number.
      CASE l_len.
        WHEN '9'.
          l_index = 1.
        WHEN '12'.
          l_index = 2.
        WHEN '15'.
          l_index = 3.
        WHEN '18'.
          l_index = 4.
      ENDCASE.
      wa_method_project-refnumber  =  l_index .
      TRANSLATE wa_method_project-objectkey TO UPPER CASE.
      APPEND wa_method_project TO i_method_project.
      CLEAR :wa_method_project, l_index.
    ENDLOOP.
    l_index = l_index + 1.
    wa_method_project-refnumber  = ' '.  "l_index .
    wa_method_project-objecttype = ' '.  "'WBS_ELEMENT'.
    wa_method_project-method     = 'SAVE'.
    wa_method_project-objectkey  = ' '.
    APPEND wa_method_project TO i_method_project.
    CLEAR wa_method_project.
    LOOP AT e_wbs_hierarchie_table INTO wa_wbs_hierarchie_table.
      MOVE-CORRESPONDING wa_wbs_hierarchie_table TO wl_wbs_hierarchie_table.
      APPEND wl_wbs_hierarchie_table TO it_wbs_hierarchie_table.
    ENDLOOP.
    Update the fields of 'l_project_definition_upd' as 'X' for the fields which has values in 'E_PROJECT_DEFINITION' respectively.
    CLEAR : l_project_definition_upd.
    p_ddic_name = 'BAPI_PROJECT_DEFINITION_UP'.
    struc       = 'l_project_definition_upd'.
    fun_struc   = 'E_PROJECT_DEFINITION'.
    TRANSLATE: p_ddic_name TO UPPER CASE,
               struc       TO UPPER CASE.
    SELECT * FROM dd03l INTO TABLE lt_dd03l WHERE tabname = p_ddic_name.
    LOOP AT lt_dd03l INTO ls_dd03l.
      ASSIGN ls_dd03l-fieldname TO <c>.
      fieldname = ls_dd03l-fieldname .
      CONCATENATE fun_struc '-' fieldname INTO fieldname.
      ASSIGN (struc) TO <struc>.
      ASSIGN COMPONENT <c> OF STRUCTURE <struc> TO <sc>.
      ASSIGN (fieldname) TO <def_field>.
      IF NOT <def_field> IS INITIAL  .
        <sc> = 'X'.
      ENDIF.
    ENDLOOP.
    Update the fields of 'l_wbs_element_table_update' as 'X' for the fields which has values in 'e_wbs_element_table' respectively.
    READ TABLE e_wbs_element_table INTO wa_wbs_element_table INDEX '1'.
    CLEAR : l_wbs_element_table_update, fieldname1, p_ddic_name, struc, fun_struc .
    p_ddic_name = 'BAPI_WBS_ELEMENT_UPDATE'.
    struc       = 'l_wbs_element_table_update'.
    fun_struc   = 'WA_WBS_ELEMENT_TABLE'.
    TRANSLATE: p_ddic_name TO UPPER CASE,
               struc       TO UPPER CASE.
    SELECT * FROM dd03l INTO TABLE lt_dd03l WHERE tabname = p_ddic_name.
    LOOP AT lt_dd03l INTO ls_dd03l.
      ASSIGN ls_dd03l-fieldname TO <c>.
      fieldname = ls_dd03l-fieldname .
      CONCATENATE fun_struc '-' fieldname INTO fieldname.
      ASSIGN (struc) TO <struc>.
      ASSIGN COMPONENT <c> OF STRUCTURE <struc> TO <sc>.
      ASSIGN (fieldname) TO <def_field>.
      IF NOT <def_field> IS INITIAL  .
        <sc> = 'X'.
      ENDIF.
    ENDLOOP.
    Append the value of l_wbs_element_table_update TO the table i_wbs_element_table_update for Bapi_project_maintain.
    CLEAR i_wbs_element_table_update.
    APPEND l_wbs_element_table_update TO i_wbs_element_table_update.
    CALL FUNCTION 'BAPI_PROJECT_MAINTAIN'
      EXPORTING
        i_project_definition       = l_project_definition
        i_project_definition_upd   = l_project_definition_upd
      TABLES
        i_method_project           = i_method_project
        i_wbs_element_table_update = i_wbs_element_table_update
        i_wbs_element_table        = it_wbs_element_table.
       i_wbs_hierarchie_table     = it_wbs_hierarchie_table.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        wait = ' '.
    Please help me to solve the issue.

    I am not sure why it is not working??  Try for any other alternate function modules.
    But i see one issue with your coding, always check the return table message type and use commit work, instead of sy-subrc check. This fails for BAPI's

  • Not able to Print the report

    <p>Hello All,</p><p>I am not able to print the report. When i click on the icon a blank form opens up. Is there something i need to do to see the form with some details.</p><p>Thanks</p><p>ram</p><p>&#160;</p>

    <p>Hi Ram,    </p><p>Can you give me some more details around your issue? How exactly are you building the viewer? Are you using the JSP Page Wizard that comes with Crystal Reports for Eclipse? If so, then can you tell me what application server you are deploying to?  All of these pieces may help narrow down the issue.  </p><p>Regards,<br />Sean Johnson (CR4E Product Manager) <br /><br /> <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a>          </p>

  • Need help with imovie photos extension. I am not able to view the editing tools no matter what I do!!!! Help please ASAP

    I Have read a lot of tutorials or whatever but Im not able to view the editing tools from imovie in the photos app. I have tried the trimmer thing and the yellow outline does appear but the only options available are "play, trim or cancel". I really really want to use the filters and stuff so please help me if you can!
    Thanks!

    Well, everything that you have bought with her Apple ID prior to getting your own Apple ID is forever hers. Apple will not transfer content from one ID to another. But in the case of the Mac, contact iTunes Customer Service and request that they send your issue to the Account Security Team and ask that the Mac be released form your mother's account so you may register it with your account. Then you can accept the iLife apps into your account for any future updates.
    iTunes Support -
    http://www.apple.com/support/itunes/

  • Error #2057: The page could not be added to the print job.

    I've been making myself crazy over this one.  I'm trying to print a complex multi-page "report" in Flex, but I keep getting this error every time I try to call FlexPrintJob.addObject(page):
    Error #2057: The page could not be added to the print job.
    Here is the basic scenario...  I have created a new control I call a PrintVBox that extends the normal VBox control.  After adding all of the children properly to the component, I wait for an update event (so that the heights of all the components are calculated) and then I call a custom method I have added to PrintVBox that "paginates" the control.
    This pagination method essentially decides how many of the items in the VBox can fix on each page, and splits them up into separate pages.  Here's a somewhat graphic example of what happens:
    (before paginate)
    ***** PrintVBox ********
         [ Item 1 ]
         [ Item 2 ]
         [ Item 3 ]
         [ Item 4 ]
         [ Item 5 ]
    This single VBox with 5 items, after calling the paginate method becomes something like this:
    (after paginate)
    ****** PrintVBox ********
         **** VBox (page1) ******
                   [ Item 1 ]
                   [ Item 2 ]
         **** VBox (page 2) ******
                   [ Item 3 ]
                   [ Item 4 ]
                   [ Item 5 ]
    So, what was once a single VBox with 5 UIComponents on it is now a VBox that contains two VBoxes, each the exact size of a printable page, one containing the first two items, the other containing the second two items.
    In my example that I am working on, my PrintVBox that I have created uses a Repeater to create about 20 HBoxes on the page.  I then call
    myFlexPrintJob.start()
    to show the print dialog and get the user's parameters.  I then pass the chosen print height and width to the PrintVBox control and call the paginate method, which creates pages of the desired width/height.  I have tested this part thoroughly and displayed the resulting PrintVBox on the screen and it paginates successfully and all is well.  After paginate, it has created 3 page VBoxes each holding some of those 20 items.
    I then iterate thru PrintVBox.getChildren() array, in this case which is the three VBox pages, and I call:
    myFlexPrintJob.addObject(page);
    for each one.  Each one errors out with the above error.  The error is down in the PrintJob code, which is part of the Flash framework and I cannot step through it.  I have no indication of why the page can't be added to the print job.  Is there a reason this is happening??  Does it have to do with the Repeater that originally created the 20 HBoxes, even though I have now moved those HBoxes down onto separate pages?  I'm just so confused here.
    I can probably post the entire code chunk if someone really wanted it.  I'm currently testing it as an AIR application using a big tester XML data object on the repeater, so that I didn't need a database and such to create the control and test printing.  If someone really wants to see what I'm doing, let me know.
    HELP! PLEASE!!
    Thanks,
    Joe

    Were you able to solve this problem?
    I am currently having the same problem as yours... I created my own printing classes that do all crazy calculation to figure out page breaks and stuff... everything goes well until the point I want to add these pages to the printJob. I get same error?
    Any help is highly appreciated.
    Thanks,

  • I have realised over time I have created multiple accounts. I have bought music on my iphone and am not able to locate the account that I made most of my purchases on. I have bank statements on the purchases but don't know how to contact someone to help.

    I have realised over time I have created multiple accounts. I have bought music on my Iphone and am not able to locate the account that I made most of my purchases on. I have bank statements on the purchases but don't know  how to contact someone in Itune to help me.  PLEASE

    I don't have the app adn no expereince with it, but it appears basec on teh app description you may need it installed on your MAC as well to download the files.
    You might find help on the vendors website: http://www.nfinityinc.com/index.html

  • Not able to display the Installation Base of once it unassigned from upper level Installation IBase.

    Hi All
    I am working on IBase scenario for my client, I am new to the IBase scenario. Here we are creating installation base for two to five levels of product.
    Once we create IBase for lower level then this IBase is inserted in upper level IBase. Like this we assign all levels based on product.In some cases we need to unassign any of IBase from its upper level IBase. When it is unassigned we are not able to display the IBase which unassigned. When it is unassigned from upper level how come system not able to display this IBase. If we speak functionally the part (IBase) which is unassigned should be valid to assign in any other upper level IBase in feature.
    The error I am getting for above is
    Serial number XXXXXXX for material XXXXXXX does not exist in any IBase
    Message no. IQ122
    Diagnosis
    Serial number BMF3000106 for material S24-D5022-C100-6 does not exist in any installed base on 31.03.2015 at 10:22:09.
    System Response
    The system cancels processing.
    Hi experts please suggest.
    Regards
    Kesava

    Hello Kesava
    Can you please explain in detail what exactly you are trying to do while assigning and unassigning Ibase.
    Regards
    Naresh

Maybe you are looking for

  • How to use eMaileWay in a safe way?

    Is it possible to set up eMaileWay so it won't delete email messages until the end of collaboration definition? I need to download very sensitive data from a mailbox, do a complicated transformation and save the message in to a DB. A lot of things ca

  • Is there a way to save an iPhoto album from my iPad2 to my PC (not a Mac)

    I am trying to free up space on my iPad, and one of m biggest files is an album I have created in iPhoto.  Is there a way that I can save/import a copy if this to my Windows-based PC, so that I will not lose it if I delete it from the iPad to free up

  • Keyboard character representation

    After doing an update my Quotation, Greater than, Less than and Question mark keys do not present what they are supposed to.  Is there a fix to this type of issue ÉÉÉ

  • Epson stylus c88+ will not print from photoshop elements 13

    I am using Photoshop Elements 13 to edit some images. I am trying to print on the Epson Stylus c88+ inkjet printer but i am getting an error that the saved printer information is not compatible with this version of Photoshop Elements. What do I need

  • Capture all SQL for a session

    I'd like to be able to capture all the SQL run for a session in SQL Developer.  I am aware of the SQL History, however that does not include updates made "directly" to tables via the Data view.  I am really more interested in inserts, updates and del