Not able to change source system connection
Hi, I have problems changing a source system connection from BW. BW is already connected to source system A, which is closed down, and I'd like to connect BW to source system B, which excists and can be accessed. I have tried to use BDLS, but get the message that System B already excists (new one). I try to delete it (Change view logical System), but am not allowed to do this. I get the message "must not be deleted, first delete from distribution model." And thats where I am stuck. Can anyone guide me on my way?
Regards E!
Comment to the last answer:
When I try to delete in SALE I am told that the source system also excists in the Distribution Model (CUA) and can therefore not be deleted. It must be deleted in the distribution model first. I find CUA at BD64. Looks like this is the connection to Solution Manager. What are the consequences for deleting the Source System here? And will it hlep me to solve my problem, which is that I can't change my connection from Source System A to new Source System B?
Regards E
Similar Messages
-
Does not allow to change source system in Variant
Hi Gurus,
I am creating a variant for the program RSIMPCUST, but it does not allow me to change source system name. It is showing me gray color. Do you how to fix this issue ?.
Thanks
LizaHello Liza,
Did you try my solution?
[Re: Change source system name in variant in BWQ]
There are solutions to change variants properties, but that particular program has the logsys parameter not able to change, so you cannot change the value of that variant (only with debug).
It's best to go for that solution I already provided to you...
Diogo. -
Not Able to create Source system for MSS using DB Connect
hi All,
i am trying to create a source system for MSS(SQL Server) using DB Connect.
CAN I KNOW THE ENTIRE PROCEDURE FROM BOTH THE ENDS?
like how you create the user in SQL Server and
Do WE NEED ANY ADD-ONS in BW SYSTEM and the Connection Parameters..
needed immediate HELP...
ADVANCE THANKS TO ALLHi Lokanth,
Refer to OSS Note 512739.
Also check these links:
http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/frameset.htm
Bye
Dinesh -
Not able to activate source system meta data
Hello,
For BW 3.5 The connection is working fine between source system and metadata is getting replicated successfully but in inactive mode.
While activating I get following error.
Incorrect IDoc type éâÄÃðôð@@@@@@@@@@@@@@@@@@@@@@@ in the ALE definition of the source system RSAR 373
Not sure what is wrong I have checked IDoc settings in both the systems they exists and the table RSBASIDOC has all the correct entries.
Thanks and Regards,
MilanHi,
Re-activate the source system in BW. That will recreate all the ALE settings. Make sure that the source system is open for changes and you use a user ID and password with appropriate auths for maintaining ALE settings.
after that
Try the restore option. Run check after that.
Regards,
San! -
Not able to find Source System in BI 7......
Hi All,
I am working on BI 7
I am exctracting the data from Flat File Source System like SMID(Characterstic) and PQTY,SALE,PROFIT as a KeyFigures
I have taken SMID as Characterstic and PQTY,SALE,PROFIT as a KeyFigures..
I hav created InfoObject Catalog for Characterstic and Keyfigures...
I Created a Application Componenet and Assigned Objects to InfoSource also...
But i struckked while assigning the Source System to the InfoSource...
I am not able to find how to assign the Source System like we do in 3.0b,3.1c & 3.5..
Can anybody tell me the Step by Step Navigation procedure for to assign Source System to the InfoSource and Other Things also....
Regards,
Kiran TelkarHi,
These are the settings needed for the broadcaster:
http://help.sap.com/saphelp_nw70/helpdata/en/55/1b9940ccd42a54e10000000a1550b0/frameset.htm
Eddy
PS. Reward useful answers and earn points yourself -
RSA1 - Source system connection : Change in logical system name
Dear friends,
Can you please tell me how can i change the logical system name for a source system connection.
There is no change in source system & source system connection check works well, just we have decided that from current logical system name SID_100 should be changed to SIDCLNT100.
Can i do this by running BDLS in BW for RSBASIDOC table from SID_100 to SIDCLNT100 ?
thanks
ashishHI Sunny,
This is not the same problem, may be similar though..i am not getting a way.
let me describe u in a bit more details.
Currently, we have a working source system connection to a system SID_CLT. there is no change in source system.
now, can i change this system connection technical name from SID_CLT to SIDCLNT*** ..
thanks
ashish -
Not able to change the original system of the object
Hello
BW infosource was created in the system Q01 (test) and transported back to D01 (dev).
I would like to change original system from Q01 to D01 to enable object modification.
I am not able to change the original system of the object in the tran se03 as system is disabled.
Original System Q01 (grey)
Any solution for this ?
thankshi,
before transporting maintain the settings in the Dev system as follows.
Open tcode RSA1 in dev system, from Menu goto -- tools -- Conversion of Logical system Names.
In this maintain the
Original source system Target source system
Technical name of R/3 client of test Technical name of R/3 client of dev system
This setting has to be maintained while transporting the changes to next system, this ensures that the objects are mapped to the correct source system name on importing and are replicated properly from them.
regards,
Arvind. -
SRM 7.0 Buyer not able to change SC in Sourcing cokcpit.
HI Everyone,
I remember, in SRm 5.0, buyer can change shopping cart whole sourcing from sourcing cokpit. Has this been changed in SRM 7.0? We are nota able to change the SC in Sourcing cockpit.
Thanks,
SGSAP rules says that
You cannot change a shopping cart directly from the sourcing application.
http://help.sap.com/saphelp_srm70/helpdata/en/d8/33ec56f17f4404806072749f7e764f/frameset.htm
Since REQUESTER department requested only BUYER department has to source.
BUYER can identify the vendor and add / price only in the cockpit.
Since conflict between REQUESTER and BUYER department.
BUYER duty is whatever REQUEST department has requested needs to be sourced.
Note 1435354 - Sourcing Cockpit:Product Category field editable in SC
Add a shopping cart to the Purchaser's Workarea in the Sourcing Cockpit and click at the link of the Shopping Cart item the Shopping Cart item will be opened in change mode and the Product Category field is shown as editable. As per standard design of Sourcing Cockpit, the product category of the item should not be editable in the Sourcing Cockpit.This note corrects the error and displays the Product Category field of the Shopping Cart as read only.
Muthu -
Buyer not able to change fields of SC in sourcing cockpit in SRM 7.0
Hi
We are on SRM 7.0 , SP 07 . We are in classic mode.
Buyer is not able to change fields of shopping cart in sourcing cockpit like delivery date and quantity . He is able to add supplier and create PO . Even when he creates draft PO , he is not able to edit the fields of shopping cart like delivery date and quantity. Is it a standard Bug , is their any OSS SAP Note for this
Regards
AshishAs per SAP Standard BUYER can only vendor and Enter price and create a follow on document.
Buyer does not have a control to edit other data.
Buyer wants to they can do it in ME21N ..PO
not in the shopping cart -
'System Preferences' gets hanged. Not able to change any settings.
I'm not able to change my wallpaper. Main issue is as soon as I open 'System Preferences', the window opens but I'm not able to click on anything. Not able to change any settings. Tried restarting but no help.
Please help.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Boot in safe mode and log in to the account with the problem. First, disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable, and remove all aftermarket expansion cards. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including your login items.
Launch the application(s) and test. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) -
How to Change Source system type of ECC6.0 in BW system
Hi BW Experter,
I connected ECC6.0 PRD system with BI7.0 PRD system , the connection is successful,
but the source system type of ECC6.0 PRD is not collect . The ECC6.0 PRD is as a
BW system type in the source system list of bw system .
I found that Tcode RSA1 has ever been run in PRD ECC6.0 , So I did a connection testing of
ECC6.0 QA with BI7.0 PRD .
Step 1. Connect ECC6.0 QA with BI7.0 PRD , ECC6.0 QA was as SAP system type in source system list of bw system .
Step 2. Run tcode RSA1 in QA ECC6.0
Step 3. Delete connection of ECC6.0 QA with BI7.0 PRD .
Step 4. Connect ECC6.0 QA with BI7.0 PRD again , ECC6.0 QA was as SAP system type in source system list of bw system .
I want to know how to change ECC6.0 PRD source system type to SAP .
If it can't been change to SAP ,Is there any impact when ECC6.0 PRD is as bw system type in source system .
Thank you for your help .I got the soulution from note: 1087980 - ECC Source systems appearing in BI folder
Summary
Symptom
Source system connection for an ECC system appears in the BI folder, rather than in SAP folder, as expected.
Other terms
Wrong folder,RSA1, RSBASIDOC, RSAP_BIW_DISCONNECT
Reason and Prerequisites
Transaction RSA1 was inadvertently used on an ECC system , thereby creating a 'Myself' source system entry in RSBASIDOC table
Solution
This is just a display issue and does not cause any operational issues. Therefore, it need not be corrected, especially if the ECC system in question is used as a BI system as well.
If it is absolutely required that the ECC source system appear in the correct folder, perform the following steps.
1. Check that an entry with SRCTYPE 'M' exists in table RSBASIDOC table of ECC source system.
2. Note the values for SLOGSYS and RLOGSYS. It should be same.
3. Run the function module RSAP_BIW_DISCONNECT in the ECC system.
NOTE: Never run that function module in a BI system!
4. Enter the following values :
I_BIW_LOGSYS <RLOGSYS> as noted in step 2
I_OLTP_LOGSYS <SLOGSYS> as noted in step 2
I_FORCE_DELETE <X>
< DO NOT ENTER ANY VALUE IN THE FIELD - RFC target sys !!!!! >
5. Go to RSA1-> Source systems in the BI system connected to the ECC system.
6. Select the ECC source system and select RESTORE in the right click menu.
Now the ECC system should appear in the SAP folder.
If running RSAP_BIW_DISCONNECT results in an error like OTHER_ERROR, please check if a valid RFC connection exists in transaction sm59.
If the myself source system connection cannot be deleted in any case, log a service marketplace message with SAP Support.
Edited by: fang frank on Jul 15, 2009 8:31 AM -
Source system connection in IDES ECC6.0 Version
Hi experts,
I have ECC 6.0 in our Company, ECC 6.0 version also have BI integrated with ECC6.0 version.
Now my question is that is it possible to connect r/3 with BI in the same server, we have two application server, if yes Please let me know how to achieve it without changing the logical system name.
because if we change logical system name then it gives a error message that logiacal system name has been changed for this system.
any help in this regard would be apprecicated.Hi,
One server can have several systems but with different client and with different logical system anem. Now if logical name is same, they source system connection is not possible. Logical system name can be changed in t-code SCC4, but please do consult basis person before doing this as this is bit sensitive.
Regards
Pankaj -
Change Source system Tech.Name
Production : PRE -
> PRB
PRE-Production : PPE -
> PRE
We make a copy of our production BI to Preproduction BI (PPB) we follow note # 886102. We want to connect this system to our pre production ERP (PPE).We already run BDLS change the logical system name we created new RFC created which is pointed to new R3 system .Problem is when we are going to run Tcode RSA1 in source system it shows old Tech name PRE600. We are unable to activate the source system.
We can create new source system (PPE),but All our BI objects mapped with old source System (PRE600). I am afraid to change thousands of BI objects ( change source system from PRE600 to PPE600).
Is there any work around we can change the Logical Source system Tech.Name? or some batch job which change the source system name for all BI objects.
Appreciate your earliest reply.
NawabHi
Can you please check the Tcode BDLS
Check the document it will be helpful
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
Regards -
Not able to login to system during upgrade CRM
Hi,
I am upgrading CRM 2007 (6.0) to 7.02. I got an error during execution phase in MAIN_NEWBAS/XPRAS_AIMMRG. I am not able to login to system (upgrade still running, logon not possible). I tried to login to shadow system, changed system number to 04 but still not able to login. Please help ASAP.
Thanks,
Kavitha Rajan.If you are in the "Execution" phase which is basically the downtime phase then the shadow wont be available. You need to connect to the main system. You will be able to login using the DDIC user. If you want to login with another user then you will need to unlock the system.
Follow this SAP KBA
1901463 - How to unlock the SAP system to perform correction(s) during an upgrade. -
Not able to change the password using FNDCPASS
I am not able to change password using FNDCPASS. I am getting follwoing error while executing following command with APPLMGR user ( before that I have source the .env file ) (OS-Linux)
[applmgr@ora11 /]$ FNDCPASS apps/apps 0 Y system/manager SYSTEM APPLSYS WELCOME
Log filename : L2741743.log
Report filename : O2741743.out
APP-FND-01630: Cannot open file L2741743.log for appending
Cause: FDPFOP encountered an error when attempting to open file L2741743.log for appending.
Action: Verify that the filename is correct and that the environment variables controlling that filename are correct.
Action: If the file is opened in read mode, check that the file exists. Check that you have privileges to read the file in the file directory. Contact your system administrator to obtain read privileges.
Action: If the file is opened in write or append mode, check that you have privileges to create and write files in the file directory. Contact your system administrator to obtain create and write privileges.
Can some one pls guide me on thisDuplicate post-
Not able to change the password using FNDCPASS
Please post only once.
Thanks,
Maybe you are looking for
-
Deploying BI publisher report from OEM plug-in
Hi! I am a bit confused about how to deploy & access BI publisher report from the plugin I develop I've found only the http://docs.oracle.com/cd/E24628_01/doc.121/e25161/bi_pub.htm and am a bit confused What I did: 1) Integrated BI publisher with OEM
-
How to get calender in f4 helpfor select options in module pool (urgent)
Hi All, how to get calender in f4 help for select options in module pool Please help . Thanx in advance, amruta
-
How to: disable the default sharpening
All - I've done a detailed writeup on how to disable the default sharpening in Lightroom using a develop preset and the import module. It's really a pretty basic technique, but I've seen a lot of people asking how to do this very thing. Hope this tut
-
How to install LG Super multiblade to Macbook Pro
I bought the Macbook Pro with the Retina Display 2 days ago and didn't realize that it didnt have a CD drive until today. I took it back to the store and they said that the previous model that I wanted didnt come in a 8GB anymore so its either downgr
-
Thinkpad W530: None of the USB ports work when used with a 4338-35U replicator
I have tried mouse. keyboard and a generic USB stick with a LED. None of the USB ports work on the replicator. Everything works fine when connected directly to the W530. The replicator ports must not have power because the LED doesn't come on.