Not able to create the NEW DC under the Track from NWDS

Hi All,
I have imported one Track to the NWDS. Now i am trying to create the new dc under the SC component which i have imported under the track.
When entered as
vendor: abc.com
name as: test_dc
click on next giving the following error.
syntax of abc.com/test is not valid:Invalid name: appropriate prefix not found; choose another name or another name server.
Any body tell me how to resolve this error.
Regards
Vijay

Hi Vijay,
Following can be done for Name Reservation:
1. Log on to the SLD.
2. Click on Name Reservation
3. Select "Development Component" in the Name Category
4. Click on button New Name Prefix
5. Add your prefix abc.com in the NAme Prefix field and Save.
You can also look at [this.|http://help.sap.com/saphelp_nw70/helpdata/EN/43/e9905fe1582d53e10000000a422035/frameset.htm]
Regards,
Alka.

Similar Messages

I've just updated my iphone to the version 5.0 (9A334), I'm not able to create a new event in the calender, it shows "no calender"

I've just updated my iphone to the version 5.0 (9A334), I'm not able to create a new event in the calender, it shows "no calender"

Here you are "the strange draft logos"...

I am not able to create a new tab, eventhough i have tried all ways to do it.

Normally the existing (current) tab has at the end an "+", and that gives you the option to make a new tab to the right. My Firefox tab does not have the "+", and I'm not able to create a new tab for another link. The new tab option is not working on my Mozilla internet browser.

Use Hotkey CTRL + T to Open a Blank Tab. Do the following too:
go to Help Menu -> select "Restart with Add-ons Disabled"
Firefox will close then it will open up with just basic Firefox. You can enable the Add-ons later. Check and tell if its working.

Not able to create a new action

I am using Photoshop CS5 Extended Version - Student and Teacher Edition. I am not able to create a new action. When I open up the actions menu, the new action option is greyed out.
Also, there is no "new action" icon at the bottom of my action screen like I've seen in tutorials showing how to create a new action (screen shot from a tutorial).
How can I get these buttons so I am able to create a new action. I've already uninstalled photoshop and reinstalled it but have gotten the same screen menus for actions. I've also reset the photoshop essentials settings menu but that did not help either. What do I need to do next?
Thanks,
Xemena

.... will it work if you take it off button mode?

I'm not able to create a iphoto calendar with the correct birthday entries.

Hello,
I use the latest Iphoto version and OS X 10.9.
I tried to create a calendar in iphoto that includes all birthday information of my family. Unfortunately I'm not able to do this.
I tried two differnt ways to get the information into the calendar.
First of all I' tried to use the option of the calendar to get the information of my contacts and it partly worked. Some dates were missing and I was not able to modify or add additional birthdays in the calendar. I checked my contacts and the information was there but not shown in the Iphoto Calendar.
Therefore I have to get the information into the calendar in a different way. For that I created a new calendar in ICal and created for each Birthday entries.
I select the option in the Iphoto calendar to show the new calendar in iPhoto. But the result was worse than with the first solution. Only few entries was shown in the calender.
Do anybody have an idea how can I solve this issue.
Thank you in advanced,
Philipp

First of all I' tried to use the option of the calendar to get the information of my contacts and it partly worked. Some dates were missing and I was not able to modify or add additional birthdays in the calendar. I checked my contacts and the information was there but not shown in the Iphoto Calendar.
Do the birthdays (from Contacts) show correctly in the Calendar app? Sometimes there is a formatting problem with the date string in the Contacts. If the Birthdays do not show correctly in the Calendar.app, try to delete them from Contacs and enter them again, and check, if they now are showing correctly in Calendar. Quit both Contacts and Calendar.
Then restart iPhoto, and in the "Settings" for your Photo Calendar disable the Birthdays option, and then turn it on again.
Any changes you do to the birthdays in Contacts may only appear in iPhoto Calendars after Calendar or Contacts wrote their databases, and iPhoto will read these databases, when you enable the "Birthdays" option. Toggling this option on and off will ensure, that the new Contacs info will be read.
-- Léonie

Not able to create a new domain through ant task

Hi,
I have to upgrade weblogic 8.1 to weblogic 10.3 and I am using vanilla version of it. the first step to it is to create weblogic domain and then configure it and then start teh server and then deploy it. The problem starts when I am creating the domain, I am using ant task for domain creation and following these steps
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/programming/ant_tasks.html
when ant-task is trying to build the specified domain, it is looking for some config.xml and that config.xml should also generated by wlserver/ant task through a template. I have no idea, where and how to define that template.. hence getting following error.. tried hard but not able to get through. can anyone please help..
Thanks in Advance
Error stack trace:
[WLServer THS-SA-Admin] <Feb 16, 2009 1:49:27 PM IST> <Info> <Management> <BEA-1
40013> <C:\WIRES\Standalone\weblogic\domains\THSStandAlone\config\config.xml not
found>
[WLServer THS-SA-Admin] <Feb 16, 2009 1:49:27 PM IST> <Info> <Management> <BEA-1
41254> <Generating new domain directory in C:\WIRES\Standalone\weblogic\domains\
THSStandAlone>
[WLServer THS-SA-Admin] <Feb 16, 2009 1:49:28 PM IST> <Critical> <WebLogicServer
<BEA-000362> <Server failed. Reason:[WLServer THS-SA-Admin] There are 1 nested errors:
[WLServer THS-SA-Admin] weblogic.management.ManagementException: Failure during
domain creation
[WLServer THS-SA-Admin] at weblogic.management.internal.DomainDirectoryS
ervice.generateDomain(DomainDirectoryService.java:229)
[WLServer THS-SA-Admin] at weblogic.management.internal.DomainDirectoryS
ervice.ensureDomainExists(DomainDirectoryService.java:152)
[WLServer THS-SA-Admin] at weblogic.management.internal.DomainDirectoryS
ervice.start(DomainDirectoryService.java:72)
[WLServer THS-SA-Admin] at weblogic.t3.srvr.ServerServicesManager.startS
ervice(ServerServicesManager.java:459)
[WLServer THS-SA-Admin] at weblogic.t3.srvr.ServerServicesManager.startI
nStandbyState(ServerServicesManager.java:164)
[WLServer THS-SA-Admin] at weblogic.t3.srvr.T3Srvr.initializeStandby(T3S
rvr.java:711)
[WLServer THS-SA-Admin] at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:4
82)
[WLServer THS-SA-Admin] at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:440)
[WLServer THS-SA-Admin] at weblogic.Server.main(Server.java:67)
[WLServer THS-SA-Admin] Caused by: com.bea.plateng.domain.script.ScriptException
: Template "null" does not exist. Line 1
[WLServer THS-SA-Admin] at com.bea.plateng.domain.script.ScriptParserCla
ssic$StateMachine.processRead(ScriptParserClassic.java:510)
[WLServer THS-SA-Admin] at com.bea.plateng.domain.script.ScriptParserCla
ssic$StateMachine.execute(ScriptParserClassic.java:428)
[WLServer THS-SA-Admin] at com.bea.plateng.domain.script.ScriptParserCla
ssic.parseAndRun(ScriptParserClassic.java:150)
[WLServer THS-SA-Admin] at com.bea.plateng.domain.script.ScriptParserCla
ssic.doExecute(ScriptParserClassic.java:112)
[WLServer THS-SA-Admin] at com.bea.plateng.domain.script.ScriptParser.ex
ecute(ScriptParser.java:73)
[WLServer THS-SA-Admin] at com.bea.plateng.domain.DomainInfoHelper.execu
teSilentScript(DomainInfoHelper.java:861)
[WLServer THS-SA-Admin] at com.bea.plateng.domain.DomainInfoHelper.creat
eDefaultDomain(DomainInfoHelper.java:1755)
[WLServer THS-SA-Admin] at sun.reflect.NativeMethodAccessorImpl.invoke0(
Native Method)
[WLServer THS-SA-Admin] at sun.reflect.NativeMethodAccessorImpl.invoke(N
ativeMethodAccessorImpl.java:39)
[WLServer THS-SA-Admin] at sun.reflect.DelegatingMethodAccessorImpl.invo
ke(DelegatingMethodAccessorImpl.java:25)
[WLServer THS-SA-Admin] at java.lang.reflect.Method.invoke(Method.java:5
97)
[WLServer THS-SA-Admin] at weblogic.management.internal.DomainDirectoryS
ervice.generateDomain(DomainDirectoryService.java:224)
[WLServer THS-SA-Admin] ... 8 more
[WLServer THS-SA-Admin] >
[WLServer THS-SA-Admin] <Feb 16, 2009 1:49:28 PM IST> <Notice> <WebLogicServer>
<BEA-000365> <Server state changed to FAILED>
[WLServer THS-SA-Admin] <Feb 16, 2009 1:49:28 PM IST> <Error> <WebLogicServer> <
BEA-000383> <A critical service failed. The server will shut itself down>
[WLServer THS-SA-Admin] <Feb 16, 2009 1:49:28 PM IST> <Notice> <WebLogicServer>
<BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
[WLServer THS-SA-Admin] Error in server execution (THS-SA-Admin)

Thanks for your reply.
I have seen sample xml and my target looks the same
<wlserver dir="${weblogic.domain.dir}"
                         port="${weblogic.domain.admin.server.port}"
                         servername="${weblogic.domain.admin.server.name}"
                         username="${weblogic.domain.admin.user}"
                         domainname="${weblogic.domain.name}"
                         password="${weblogic.domain.admin.password}"
                         configFile="config.xml"
                         generateConfig="true"
                         action="start"
                         beahome="${env.BEA_HOME}"/>
my requirement is to use ant task.. otherwise I am able to create through configuration wizard
Thanks

Not able to create a new DC through NWDS with NWDI Developer role

Hi everyone,
My userid has NWDI Developer role assigned. I am trying to create a new Webdynpro DC under the software component defined in the configuration imported. It gives me an error after assigning the activity and pressing on Finish button.
I went through logs and found that it has some problems because I am not assigned the Lcr* role (this role should be in the NWDI Developer itself). I assigned the Lcr* role to my user id and tried to create the DC again. I am getting the same problem.
Please help.
Thanks,
Amber

Check out the following thread..
Re: SLD forbidden access
Your user id has to be assigned to the group JDI.develeopers
Regards
Krupa
Message was edited by: Krupakar Oleti

Not able to create a new project (i.e Manage - Project ) in 10g

Hi Team
I am trying to create a new project to implement Multi User Development Environment (MUDE) , but facing the below problems while doing so : -
a:> While Opening repository in Online Mode :-
I am not able to open open Manage --> Projects ( as Projects is disabled for me i. grayed out )
b:> While opening in Offline Mode :-
I am able to navigate to Manage --> Projects , but when the Project Windows opens and I am doing Actions --->New Project not able to do so ( as New Project is disable i.e grayed out ) .
Please guide.
Thanks
Rohit

Hi Friends
Actually there was a mistake on my part ... i.e I had opened the repositorty in offline while BI server was still running !
how silly . ..:)
I am now getting the options .
Regards
Rhit

If I delete my account from apple, I be able to create a new one with the same address?

Here is the thing, currently I have an id of apple with my gmail account, which I associated the iCloud account. I would like to delete my account to create a new from the iphone, so it is "iCloud" as my primary address. I want my apple ID is "[email protected]" not "[email protected]".
Thanks

Unfortunately, you can't. The primary address for your iCloud account must be a non-Apple email account. The only exception to this is for former MobileMe subscribers who migrated to iCloud when MobileMe closed, which was 18 months ago.

Not able to create a database link using the database gateway of oracle 11g

HI,
While trying to create a database link to SQL server from Oracle ,using the database gateway provided with 11g, i am getting the following error while making use of it in selecting columns from tables :
Error starting at line 1 in command:
select * from test1@dblink
Error at Command Line:1 Column:20
Error report:
SQL Error: ORA-28513: internal error in heterogeneous remote agent
ORA-02063: preceding line from DBLINK
These are the steps i have followed for setting up:
1.Ran the set up for the Database gateway.and mentioned the SQL server name and database .ALos set up a listener.
2. Added the following in the Listener.ora of Oraclehome 11/NETWORK/ADMIN:
LISTENER_SQL_FCD =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost) (PORT = 1541)
SID_LIST_LISTENER_SQL_FCD =
(SID_LIST =
(SID_DESC =
(SID_NAME=dg4msql)
(ORACLE_HOME= D:\app\20537\product\11.1.0\db_3)
(PROGRAM=dg4msql)
3.Added the following in tnsnames.ora inOracle home/NETWORK/ADMIN:
dg4msql=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1541))
(CONNECT_DATA=(SID=dg4msql))
(HS=OK)
4. Following is the entry in initdg4msql.ora in C:\product\11.1.0\tg_5\dg4msql\admin:
HS_FDS_CONNECT_INFO=10.148.45.242:1433//SalesDemo
HS_FDS_TRACE_LEVEL=DEBUG
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
5. Created the database link :
create database link dblink
connect to "sa" identified by "<pswd>"
using 'dg4msql'
On running :select * from test1@dblink i get the following error:
Error starting at line 1 in command:
select * from test1@dblink
Error at Command Line:1 Column:20
Error report:
SQL Error: ORA-28513: internal error in heterogeneous remote agent
ORA-02063: preceding line from DBLINK
Is there any issue with the set or definition that I get the above error?

What is the version of the Oracle database in which you have specified/and use the database link?
If it is for example 10.2.0.3.0 you need to apply the mandatory patch for RDBMS bug 5965763 first before being able to use an 11g gateway. Have a look at MetaLink note 457808.1 for details about this patch.
Regards,
Ed

I' m not able to create a new Target Schema

Hi folks,
Always I tried to create a new Target Schema using OWB Runtime Assistant, installing into a new user schema or into an existing user schema I've got a Target Schema Installation Error. The log file shows the following error lines:
(Spawn Token) Error loading Java into DB:
Sun Feb 22 11:37:32 BRT 2004
oracle.wh.util.DebugUtility: [processSPAWN]: A spawned program error. Exception = java.lang.Exception: java.io.BufferedInputStream@2cd19d
Sun Feb 22 11:37:32 BRT 2004
oracle.wh.util.DebugUtility: [processSPAWN]: Get the error, stop processing...
Sun Feb 22 11:37:32 BRT 2004
oracle.wh.util.DebugUtility: Files\Java\j2re1.4.0_03\lib\ext\QTJava.zip""=="" was unexpected at this time.
Sun Feb 22 11:37:36 BRT 2004
oracle.wh.util.DebugUtility: Assistant operation is unsuccessful ...
I've installed both OWB Design Time and OWB Server Side, in the same machine using 2different Oracle_Homes.
Please, tell me what I can do to overcome this.
Thanks all,
Ismael

Hi Pierre,
Thank you for your response.
Actually, I've installed the OWB Server Side because I was getting the same problem using the OWB Run Time Assistant of the OWB Design Time that I've installed before. In the OWBInstallGuide I read the following text, recommending not to use the same Oracle_Home:
"2.5 Step 4. Perform the OWB Server Side Install using Oracle Universal Installer
Install the OWB Server Side components on the machine where your Oracle Database Server is installed.
When you performed the OWB Design Time installation, you also installed the runtime components. Therefore, if you are performing the OWB Server Side install on the same machine as the OWB Design Time install, you are installing the runtime components twice. If you decide to go forward with this configuration, make sure to specify a separate ORACLE_HOME for each install."
Any way I'm going to try your suggestion but I'm afraid it couldn't work because of the above text. I'm running out of time, I'm supposed to start a project next Monday and I'm stuck on this problem.
Please, if you have any other hints let me know. I'll keep you informed after using the same Oracle_Home for both.
Thanks again,
Ismael

Not able to create a new tab in atg csc 10.0.3

am trying to create a new tab in csc 10.0.3 in ACC.
i created a custom tab by duplicating an existign tab and renaming the id and all. bt its not reflecting.
i had added the newl;y created tab id in componentId of Framework.
i tried to delete existing tab its working.
please help me out.

Check this out:
Immuraliraj-TechTalks: ATG CSC : Adding a New Tab to Commerce Servie Center

Not able to Create a new Remote Monitoring entry in SolMan 7.0 - RZ21

Hi expert,
I am trying to configure Interface Monitoring on Solution Manager system using BPM concept.
For testing purpose i will be monitoring IDocs from Solution Manager CUA system (which is other client in SolMan landscape) to other Satellite system.
As per the configuration part there should be System entry in the Monitoring Technical Topology, that is in RZ21 -->Topology --> System Overview.
For my system its not there, when i press create a new entry in above menu, it gives me new screen where i enter all the details.
Such as System ID, message server, client, CSMREG user details etc.
After saving the details it gives message as "Inserted successfully in secure storage" with no error message on error screen area.
However when i go back in the RZ21 -->Topology --> System Overview my system does not reflect there, even after refresh.
I am not sure if i am missing anything. please help.
Thanks.

Hi Gagan deep,
Thanks a lot for your inputs.
I have some confusion here, where can i check whether latest CCMS agent is installed or not?
Also if its not installed what steps i need to follow to acive the same?
Thanks again!

HR_MAINTAIN_MASTERDATA: Not Able to Create a New Hire Employee

I am trying to create a new hire employee. To do this, I use FM HR_MAINTAIN_MASTERDATA.
The requirement is to create new employee with data for IT0000 (Actions), IT0001 (Org Management) & IT0002 (Personal Data) only.
The FM is not working and the given error is "Fill in all required entry fields". When I use parameter DIALOG_MODE = 1 (stop on error), SAP stops on the infotype 0006 screen and prompts me to enter the required fields. The problem is I do not want to create employee data on infotype 0006 and the following screens after that. My intention is to create employee
data for infotype 0000, 0001 & 0002 only.
Any idea on the workaround for the problem above?
Filled the proposed_values tables with following fields:
IT0000 ***
'P0000-MASSN'
'P0000-MASSG'
'P0000-STAT1'
'P0000-STAT2'
IT0001 ***
'P0001-BUKRS'
'P0001-WERKS'
'P0001-BTRTL'
'P0001-ABKRS'
'P0001-PLANS'
'P0001-OTYPE'
IT0002 ***
'P0002-NACHN'
'P0002-VORNA'
'P0002-CNAME'
'P0002-TITEL'
'P0002-GESCH'
'P0002-GBDAT'
'P0002-NATIO'
'P0002-SPRSL'
'P0002-KONFE'
'P0002-FAMST'
'P0002-GBJHR'
'P0002-GBMON'
'P0002-GBTAG'
'P0002-NCHMC'
'P0002-VNAMC'
CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
EXPORTING
   pernr                             = p_pernr
   massn                           = '01'
   actio                              = 'INS'
   tclas                              = 'A'
   begda                            = p_begda
   endda                            = p_endda
*objps                              =
   seqnr                             = '000'
*sprps                             =
*subty                             =
   werks                            = 'US01'
   persg                             = '1'
   persk                             = 'EC'
   plans                             = '00042933'
   dialog_mode                  = '1'
   luw_mode                     = '1'
   no_existence_check     = 'X'
*no_enqueue                 = 'X'
IMPORTING
   return                            = lt_bapireturn
   return1                          = lt_bapireturn1
TABLES
   proposed_values          = lt_value.

In the methode VIEKN of the class CL_HRPA_VIEKN there is a test to see if PA0003 exists before it is created.
Use the enhancement to INSERT PA0003 at the begin and to DELETE PA0003 at the end.
METHOD viekn.
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""$"$\SE:(1 ) Classe CL_HRPA_VIEKN, Méthode VIEKN, Début D
*$*$-Start: (1 )--------------------------------------------------------------------------------$*$*
ENHANCEMENT 1 ZDIH_APPLICATION_EXTERNE_CREAT.    "active version
DATA : lw_pa0003 TYPE pa0003.
DATA : fl_pa0003 TYPE flag.
CLEAR fl_pa0003.
* If coming from Web dynpro
IF sy-cprog EQ 'SAPMHTTP' ANd pernr NE '00000000'.
* Check if the infotype 3 already exists
SELECT SINGLE * FROM pa0003 INTO lw_pa0003 WHERE pernr = pernr.
IF sy-subrc NE 0.
    fl_pa0003 = 'X'.
    MOVE pernr TO lw_pa0003-pernr.
    MOVE '18000101' TO lw_pa0003-begda.
    MOVE '99991231' TO lw_pa0003-endda.
    MOVE '12' TO lw_pa0003-viekn.
    INSERT pa0003 FROM lw_pa0003.
ENDIF.
ENDIF.
ENDENHANCEMENT.
*$*$-End: (1 )--------------------------------------------------------------------------------$*$*
----> original code of method <----
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""$"$\SE:(2 ) Classe CL_HRPA_VIEKN, Méthode VIEKN, Fin D
*$*$-Start: (2 )--------------------------------------------------------------------------------$*$*
ENHANCEMENT 2 ZDIH_APPLICATION_EXTERNE_CREAT.    "active version
IF sy-cprog EQ 'SAPMHTTP' AND pernr NE '00000000'.
    IF fl_pa0003 = 'X'.
      DELETE FROM PA0003 WHERE pernr = pernr.
    ENDIF.
ENDIF.
ENDENHANCEMENT.
*$*$-End: (2 )--------------------------------------------------------------------------------$*$*
ENDMETHOD.

Not able to create a new listener

Tried to create a new 11g grid infrastructure standalone and it failed at configuration assistant and thereby asm was not created.
I tried the netca manually to create the listener but not giving the error " the information provided for this listener is currently in use"
I deleted the old listener running at 1521 and tried to create a new listener but still getting the same error. I am installing 11.2.0.2 release in linux box.
using vmware player. I searched various forums but find that there are some issues with /etc/hosts file, hence posting my file
::1 localhost6.localdomain6 localhost6
192.168.10.100 srv1
Thanks,
B

850462 wrote:
Tried to create a new 11g grid infrastructure standalone and it failed at configuration assistant and thereby asm was not created.
I tried the netca manually to create the listener but not giving the error " the information provided for this listener is currently in use"
I deleted the old listener running at 1521 and tried to create a new listener but still getting the same error. I am installing 11.2.0.2 release in linux box.
using vmware player. I searched various forums but find that there are some issues with /etc/hosts file, hence posting my file
::1 localhost6.localdomain6 localhost6
192.168.10.100 srv1
post results from following OS commands using COPY & PASTE
id
uname -a
ps -ef | grep -i lsnr
lsnrctl status
lsnrctl service
env | sort

Not able to create the NEW DC under the Track from NWDS

Similar Messages

Maybe you are looking for