Not able to delete model column in ODI Designer

When deleting a column from a data model I get an error "This object is referenced by another object".
The column was used in the Target Datastore of two interfaces. I have opened both interfaces to the Diagram tab and unchecked the "Active Mapping" selection for the affected column on the Target Datastore. No delete feature seems to be available on the Target Datastore mapping.
In the model I have expanded the "Used In" feature for the column and both "As a Source" and "As a Target" are empty.
Any suggestions would be much appreciated. Thanks
Rose

Hey, thanks for your attention on this!
Just as an update, the model column I wanted to delete still appeared in a couple of interfaces but I had shut off "Active Mapping" and unchecked "Insert" and "Update" so I expected to be able to delete the column from the model. Even though the column's "Used In" reference said it wasn't used anywhere, it continued to throw an error when attempting a delete.
What happened is that I had not cleared the Implementation tab for the affected column in one of the interfaces. The column was originally to be hard-coded to an 'A'. Once I cleared the 'A' out of the mapping, ODI let me delete the column from the model.

Similar Messages

Not able to delete the interfaces in odi designer - Resolved

While deleting the interface i am getting error, see below:
This object is referenced by another object. View the details for more information.
You may also see where this object is used in this hierarchy.
I don't think this interface object is referenced by another object.
Can you tell me how to delete the interface.
Thanks in advance.
Message was edited by:
Mani

Hi Mani,
The hierarchy is like Data Models/Stores are Used In Interfaces, Interfaces are used in Packages.
So if you wanna delete anything in this hierarchy you need to delete the referenced one.
For deleting an Interface you no need to delete the data models/stores, you need to delete the interface in Package where its used.
Cross check again and there should be some reference in the Package for that Interface.
Also you can't able to use an Interface at MODEL.
P.S: Sorry for mess up you...:)
Thanks,
Guru

Not able to delete file from external hard disk

I connected my external hard disk to my macbook pro. But am not able to delete any file since it says the file cannot be deleted when I move it to trash. Could you let me know how to delete a file from the external hard disk?

How is your HDD formatted? NTFS? FAT?
Did you write files with rights? When you strike +I on any file, you can see its rights; if you're read-only, you may change your file's rights.

I changed my Apple ID that using an invalid email address to a new one and I am trying to update iCloud account on iPhone5 with iOS 7.1.2, and I am not able to delete iCloud account without the old password.

I changed my Apple ID that using an invalid email address and I am trying to update iCloud account with my new Apple ID on iPhone 5 with iOS 7.1.2. I am not able to delete iCloud account without the old password. Is there a way to update the Apple ID of my iCloud account?

Many people are having probalems with this right now. The only solution I've seen that seems to consistently work is the one posted by Brackers28 here: https://discussions.apple.com/message/23020591#23020591. This only works if you still have access to your old email account. If you don't, you'll have to have Apple help you reset the password for your old account so you can turn off Find My iPhone and sign into your account with your correct ID.

Not able to delete emails from Shared mailbox

Hello Team,
I have a mailbox which is shared. User A is having access on that mailbox.
I have added That mailbox as additional Mailbox. when i click on delete button or right click delete i am not able to delete that messages and from any folder.
I have configured User A profile on multiple system and in each and every system i am not able to delete emails
I am using O365 business plan and my Outlook is professional plus with latest update
I removed the mailbox which is shared and added that account as Multi Ex so i am able to delete it
I am running scripts in background so i dont want to add that mailbox as Multi Ex(By going into account settings and adding new email with credentials)
I have given full access to User A on that mailbox on the portal. I removed the access and then re added the access and then also i am not able to delete emails
I have tried safe mode
I have tried online mode
I have tried cached mode
I have tried Right clicking folder for example Inbox and given User A as owner permission from outlook.
I have done the same method of giving permission from OWA
If i open Mailbox in OWA by logging in Using User A and then clicking another user's mailbox and opening mailbox which is shared and i am able to delete emails there.

Exchange doesn't do that. POP3 is a single mailbox client mail retrieval protocol, not a mail transport protocol.
Any attempt to use it as a mail transport protocol is a great big kludge.
Exchange is designed to connect to the Internet using SMTP.
Small Business Server includes a POP mail puller, but I don't recommend it because, again, it's a great big kludge.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Not able to delete some of the pages in subpage

Hi,
I am not able to delete some of the subpages in a pagegroup and it gives the following error mentioned below can any one shed some light so that it can be fixed.
the error that surprised me during the page deletion is
Internal error (WWC-00006)
Error while deleting page. (WWC-44130)
Unexpected error - User-Defined Exception (WWC-35000)
Unexpected error - User-Defined Exception (WWC-35000)
Path ID does not exist. (WWC-50001)
this is the same problem with some of the pages is the same page group but a different set of subpages.
My portal version is 10.1.2.0.2 (Build: 150).
it would be very nice of them if any one could give me a solution for this.
Best Regards,
Vijay.

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad. Photos that were synced from your computer are deleted by moving/removing/de-selecting them from where they were synced from on your computer and then re-syncing.

I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?

I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?

Hey tulgan,
This link will provide information on what to do after you change your Apple ID:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Welcome to Apple Support Communities!
Take care,
Delgadoh

I am not able to delete my files.

I am not able to delete my files. When I delete file It ask me for password, and then It delete from system but hard does not show any free space that must be created when I delete some file. Please help me.

After deleting ,no data is going trash.
I am getting this problem from 3 three days. Rebooting system is not working. It seems like that when I delete file its move to some other location.
If it is security feature then please tell me how can I change it?

Not able to delet the order

hi friends
I am not able to delet maintenance order. I have the following error message when I try to. What should I do? Thanks.
Balance of ORD 1000006902 is not zero
Message no. KO115
Diagnosis
The balance on object ORD 1000006902 is not zero. That is, there are still costs on the object.
System Response
The object cannot be closed and the deletion flag must not be set.
Procedure
Settle the object before you close it or set the deletion flag.
I have tried to settle the order with transaction KO88 (single order settlement) . i am getting message
There are no accrued amounts; settlement is not possible.

Hello WISH,
i guess you have to repost the cost of the internal order to another internal order (probably of the header level) before you can delete the internal order.
Kind regards

Not able to delete inbound delivery.

Hi Gurus,
Please help me delete inbound delivery. I have a ticket where user is not able to delete inbound delivery. I tried to delete this delivery and I’m also getting the same errors that user is getting.
I have tried to insert real screen shots from production system in this post to give a better understanding of the scenario.
The situation is: PO was created for 2 line items for same material but different batch, for different quantities.
For line item 1:
1.      Two separate partial deliveries were received along with 1 delivery note each, for quantities 14,957.130 KG and 855.017 KG.
2.      Goods issue was posted for both quantities.
3.      Invoice receipt was done for both quantities.
4.      Goods receipt was done for both quantities.
5.      However, goods receipt was later reversed for quantity 14,957.130 KG.
Screenshots Line item 1
For line item 2:
1.      One delivery was received for full quantity of 292.112 KG.
2.      Goods issue was posted for same quantity.
3.      Invoice receipt was posted for same quantity.
4.      Goods receipt was posted for same quantity.
5.      However, goods receipt was later reversed for full quantity.
Inbound Delivery screens below:
Error VL32N screen
Message in VL09 when trying to reverse goods movement with reference to inbound delivery:
Please tell me how can this inbound delivery be deleted?
Points will be awarded for right help.
Thank you for viewing.

Hi
BV Yadav:
1. it's the business user who posted the invoice, and posted goods issue the was it appears in PO history. i'm not sure how they did it.
Kamlesh: I tried both, changing the document date and delivery date to current. i still got same error. still not able to delete inbound delivery.
Tomas Figura: Puaway QTY is already 0. this field is blank, nothing in it. pic below:
Note: someone has suggested to follow the process to reverse as many postings that have been done against the PO as possible and ultimately delete the PO, this will break all links between PO and inbound, outbound deliveries. and hence, there won't be a need to delete inbound delivery anymore. then the business user can start the brand new process from scratch by creating a new PO, create a new outbound, inbound deliveries, and all. what do you guys think of it? Please comment.
Thank you guys.

Not able to delete line items using BAPI_OUTB_DELIVERY_CHANGE

Hi,
    Not able to delete line items of a delivery using BAPI 'BAPI_OUTB_DELIVERY_CHANGE', with thte below code and even return parameter has zero messages.
I have even checked existing below posting.
https://www.sdn.sap.com/irj/scn/logon?redirect=http%3a%2f%2fforums.sdn.sap.com%2fthread.jspa%3fthreadid%3d782509
Below is the code that i am using.........
*wa1-deliv_numb = wa_lips-vbeln.
wa1-deliv_item = wa_lips-posnr.
APPEND wa1 to item_data.
wa-deliv_numb = vbeln_so .
wa-deliv_item = l_item.
wa-del_item = 'X'.
APPEND wa TO item_control.
w_header_data-deliv_numb = vbeln_so .
w_header_control-deliv_numb = vbeln_so .
w_delivery = vbeln_so .
*w_header_control-dlv_del = 'X'. "Delete whole Delivery
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
EXPORTING
    header_data    = w_header_data
    header_control = w_header_control
    delivery       = w_delivery
TABLES
   item_data      = item_data
    item_control   = item_control
    return         = return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      wait = 'X'.
I have even tried uncommenting item_data parameter but not able to delete line item.....i am able to delete whole delivery but not line items .........can any one of u help me in resolving this issiue plz ???
Regards,
M, Manohar

Kindly use WS_DELIVERY_UPDATE to delete the items
Sample code:
L_VBKOK-VBELN_VL = vbeln_so.
clear l_vbpok.
         refresh l_vbpok.
         l_vbpok-vbeln_vl = vbeln_so
         l_vbpok-posnr_vl = wa_deliv_item.
         l_vbpok-lips_del = c_x.
         append l_vbpok.
         set update task local.
         call function 'WS_DELIVERY_UPDATE'
           exporting
             vbkok_wa = l_vbkok
             commit   = ' '
             delivery = lv_delivery
           tables
             vbpok_tab = l_vbpok
           exceptions
             others   = 0.
         commit work and wait.

Not able to delete a delivery after revenue recognition is reversed

Hello Gurus,
We have a situation for certain Sales Order types after creation of Sales Order -> Delivery and PGI, we do revenue recognition. But there was some mistake and delivery needed to be deleted and recreated if needed. So after doing revenue recognition reversal we are reversing the PGI. After this when we try to delete the Delivery ( which would have got deleted if there was no revenue recognition process ) we get the below error.
Is it a problem with the way Revenue recognition is configured or does the standard behave like this. If the Invoice is also present in the above I am able to cancel the Invoice. If you think its a problem with the way Revenue reccognition is configured please advise.
Item 000010 cannot be deleted (revenue recognition status)
Message no. VL896
Diagnosis
The delivery or delivery item cannot be deleted.
System response
The document cannot be deleted since the delivery contains items that
reference sales document items that are relevant for revenue
recognition. When the goods issue was posted, the system created revenue
lines that had already been recognized. This means that there are
subsequent documents in revenue recognition for this delivery.
Procedure
If you no longer require the delivery or delivery item for deletion, set
the delivery quantities to zero and repost the goods issue. Make sure
that the quantity zero is allowed in Customizing for the delivery item
category. When the goods issue is posted, the overall processing status
is set to C and the delivery can be archived. Message determination
should be configured not to send any messages in this case. To make sure
that the system makes revenue corrections if there are differences
vbetween billed and recognized values, set a billing-relevant rejection
reason in the sales document item if more than one partial delivery is
allowed.
If you still want to use the delivery, adjust the delivery quantities
accordingly. Alternatively, deliver the referencing sales document item
again. Note that the sales document item cannot be delivered again if
only a partial delivery is allowed.
What are the changes I can do to Delete the Delivery?
If I cannot Delete the Delivery, Should I make the Delivery as 0 qty and create a new delivery with changed qty and do further process. Or should I reject the Sales Order and create a new sales order with exact qty and do further process.
Please advise.
Regards,
SNK.
Delivery has one line item. For the above case scenario, invoice is there for some deliveries and for some deliveries there is no invoice. Eg: SO -> DN -> PGI -> Rev Recog -> Iv or SO -> DN -> PGI -> Rev Recog. Requirement was SO was wrongly created as the qty was wrong or in some cases SO needs to be rejected. I am able to cancel Invoice. Rev recog is reversed. PGI is cancelled by VL09. Not able to delete Delivery and I get the above error. Ideally I thought since Rev recog is reversed, Delivery should have been deleted but not happening and above error comes.
SO - Sales Order DN - Delivery IV - Invoice
Edited by: sapconsultnt on Dec 16, 2009 5:06 AM

Hello,
Please review the Note 1224871 which introduced this functionality.
Regards,
Raghavendra YN

Not able to delete app icons that are in loading stage and more than 20mb, so cant be loaded completely.

I am not able to delete the app icon (loading) of more than 20MB file app.
I have downloaded them to my itunes but they just dont go away even after syncronising.
just to mention i have 3G network but no wifi at present.

Try resetting the iPad. Hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears and see if the loading icon is still there.
If that doesn't work, try deleting the app from the iPad and then sync it again. Delete the app by syncing with iTunes and deselect the app.
While your iPad is connected to your computer and iTunes is running, select your iPad on the left side bar, click on the apps tab in the iTunes window on the right, Uncheck the box next to the name of the app and then sync (click on apply) to remove the app from the iPad. Restart the iPad - hold down on the sleep button until the red slider appears, then slide to shut down, hold the sleep button until the Apple logo appears to start up.
Then connect the iPad to the computer again and go through the same process except this time select the app and click on apply to put it back onto the iPad.
See if that doesn't remove the loading icon.

Not able to delete BADI implementation ..

hi,
In ECC 6.0, SE18, i created a BADI interface and then created one implementation. By mistake I typed class name wrong. I want to correct it. I dont see any rename option as well I am not able to delete this implementation. I thought I can delete this one and recreate a new implementation. But I have option only to delete the BADI as a whole. I want to retain BADI definition but only delete the implementation. Is it possible ?
thks

Hi,
you can follow the following steps to delete the implementation,
step 1: Go to BADi Builder .
go to-> SE18
Step 2: give your BADI name in and display.
Step 3 : go to Implementation in tool bar.
implementation->delete
select the the implementation you want to delete form the list .
I Hope this will solve your problem.
Regards, Suhas.

Source system appearing in BI folder : Not able to delete entry RSBASIDOC

Hi all,
Iam creating source system connection from ECC to BI system.
But the source system appearing in BI folder all the time, i found one note 1087980 and tried deleting an entry with SRCTYPE = M from RSBASIDOC table with FM RSAP_BIW_DISCONNECT , but the system shows error message OTHER_ERROR and the entry does not get deleted.
For this SAP recommended to check a valid RFC connection between ECC and BI system , i have checked it and the RFCs are working fine for it also.
Please help.
Regards,
Akash.

follow this steps:
In the source sytem
SE37 e launch the FM RSAP_BIW_DISCONNECT
you will find the BIW and OLTP log on the RSBASIDOC
So run the FM.
IF you find the OTHER_ERROR, may you have to check the RFC connection. (If the source system was been refreshed, you have to create a RFC to PROD).
You should encounter this error ( Not able to delete entry RSBASIDOC), when you try to restore the DS: in this case infact, is the IDENTIFIER (TSPREFIX) that creates problem (so you have to delete the relevant entry from the table).
CIao,
Cristian

Not able to delete model column in ODI Designer

Similar Messages

Maybe you are looking for