Not able to Delete the data from Memory card

Hi all,
I have bought a new nokia 3120 classic.it is working fine but recently i have received some data from my friend.
Then suddenly the problem begins like.. when i take a photo.. i am getting error like the image is not in the format and i am not able to save that.And also, the main problem is I am unable to delete the data from my memory card.
Every time after deleting i am getting the same data.
Why this happening..is it because of VIRUS?? If so how to delete the virus from my memory card??
When i contacted the nokia care people in bangalore they are saying that they can offer the service of formatting the memory card??
Except that my Phone is working fine..the problem is with Memory card!!!
Please help me...

you can actually format your memory card first see if you have such option on your phone to format directly from the phone if that is not possible you can always use a card reader and reformat your card using your pc. just understand that all data from that memory card will be lost unless you do a back up of it. if you do a back up and restore the data to the memory card after reformat you might get the same issue so be careful as to what you will decide to do with the data from the card. once you format your card it should all be good unless the card is corrupted itself which can also happen. but first try with the reformat and see if it works out for you.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Similar Messages

Not able to delete the data from ODS

Hi All,
I have ODS which is having some requests . All the requests are being loaded with full update only. When I am trying to delete the requests from ODS, out of 4 requests 2 requests have been deleted but rest of them are not at all deleting .
As I am working in Quality system, So I don't have the access to delete request from Table level like RSODSACTREQ, RSICCONT etc...
Can you give any clue to delete the remaining 2 requests.
Thanks,

Hi kavitha,
Does the Request has data mart status.IF yes try to delete the request from the respective DSO's.
and try to delete the request.
are you deleting the Whole data from DSO ? - right click on the DSO and select deleted data from the context menu.
Regards
Prashanth K

The problem here is i am not able to get the data from the list

hi all,
i have the following code
EnrichedProductCatalogue enrichedProductCatalogue1 = new EnrichedProductCatalogue();
enrichedProductCatalogue1.setAssetCount(2);
enrichedProductCatalogue1.setBlockingProduct("Weekend Freebee");
enrichedProductCatalogue1.setBlockingReason("Compatability");
ArrayList<String> availableActionsList = new ArrayList<String>();
availableActionsList.add(EnrichedProductConstants.ADD.toString());
availableActionsList.add(EnrichedProductConstants.REMOVE.toString());
enrichedProductCatalogue1.setAvailaibleActions((ArrayList<String>)availableActionsList);
BundleProduct bundleProduct = null;
Product product = new Product();
product = new Product();
product.setProductName("International");
product.setProductClassName("International");
ArrayList<UiCategory> uiCategory = new ArrayList<UiCategory>();
UiCategory uiCategory1 = new UiCategory();
uiCategory1.setCategoryName("Simply");
UiCategory uiCategory2 = new UiCategory();
uiCategory2.setCategoryName("Freebees");
uiCategory.add(uiCategory1);
uiCategory.add(uiCategory2);
product.setUiCategory(uiCategory);
bundleProduct = new BundleProduct();
bundleProduct.setCommercialProduct(product);
enrichedProductCatalogue1.setBundleProduct(bundleProduct);
listOfEnrichProducts.add(enrichedProductCatalogue1);
listOfEnrichProducts.add(enrichedProductCatalogue1);
here i have an list called listOfEnrichProducts.
here i am adding two objects of enrichedProductCatalogue.
which contains a object called BundleProduct.
which has a reference for Product class.
here this product class has a list which contains objects of another class called UiCategory.
the problem here is i am not able to get the data from the list which contains UiCategory objects .
the following is the UI
<af:table var="row" rowBandingInterval="0" id="t1"
value="#{pageFlowScope.sample1}"
binding="#{pageFlowScope.sampleManagedBean.dataTable}"
partialTriggers="apimethods ::apimethods">
<af:column sortable="false" headerText="ProductName" id="c2">
<af:outputText value="#{row.bundleProduct.commercialProduct.productName}" id="ot15"/>
</af:column>
<af:column sortable="false" headerText="ProductClass" id="c12">
<af:outputText value="#{row.bundleProduct.commercialProduct.productClassName}" id="ot19"/>
</af:column>

<af:column sortable="false" headerText="AssetCount" id="c22">
<af:outputText value="#{row.assetCount}" id="ot1"/>
</af:column>
<af:column sortable="false" headerText="blockingReason" id="c3">
<af:outputText value="#{row.blockingReason}" id="ot2"/>
</af:column>
<af:column sortable="false" headerText="blockingProduct" id="c4">
<af:outputText value="#{row.blockingProduct}" id="ot3"/>
</af:column>

</af:table>
Can anyone pls give some solution ...

Hi Frank,
value="#{pageFlowScope.sample1}"
here sample is
Map<String, Object> flowScope1 =
ADFContext.getCurrent().getPageFlowScope();
flowScope.put("sample1", listOfEnrichProducts);
this is not the problem . i am able to get all the values except the following .
ArrayList<UiCategory> uiCategory = new ArrayList<UiCategory>();
UiCategory uiCategory1 = new UiCategory();
uiCategory1.setCategoryName("Simply");
UiCategory uiCategory2 = new UiCategory();
uiCategory2.setCategoryName("Freebees");
uiCategory.add(uiCategory1);
uiCategory.add(uiCategory2);
product.setUiCategory(uiCategory);

Not able to get the data from synchronous Webservice To BPEL process

Hi All,
My requirement is : Third party has some webservice.They are pushing data to that Webservice(Wsdl).
Third part WSDL example : http://ipaddress:port/name/Service.svc?wsdl ( This is just example format of their WSDL)
After that I need to get that data into my BPEL process and update my system.
When I built My Snchronous BPEL process I imported third party WSDL(http://ipaddress:port/name/Service.svc?wsdl) through 'import WSDL' in dialog.After that I automatically got the (request and response schema elements) parameters from that WSDL.I gave input and output of the BPEL process from those elements.
I pasted that third party URL iin SOAPUI and I got their operations and schemas.Based on that I had choosen the elements for 'input' and 'output' of the BPEL processes.I am also getting the schema structures in 'Assign' or 'Transform' activity.
I built the whole process.
I have the Process.
Now Client is pushing data to their WSDL(http://ipaddress:port/name/Service.svc?wsdl) as it is their data pushing interface.But that data is not coming to my BPEL process and instance is not being created in EM console.
As I have imported their WSDL into my BPEL process,I need to get the data.But I am not getting the data.
Is there any problem in MY BPEL process?
(or)
DO I need to use 'Webservice' Adapter in 'Exposed Services' Swimlane in Composite Editor to have the third party URL, so that they Can push the data to that WSDL in turn that data comes into my BPEL process?
Can anybody help me this case?
once again my requirement is :
Client pushes the data through their WSDL url -----> I need to get that data into MY BPEL process --> I have my own WSDl to take that details into my system.

I will explain the requirement in small paragraph:
There are two applications.One is our application(X) and another one is third party application(Y).
I need to update in my application(X) based on data coming from application(Y).
I am using SOA as a middle tier to have communication between Y and X.
(Ex: if they send some info like event type 'event1' from Y ,I need to update that 'event1' data in my X application)
The work at third party application is :
According their info,They will push data from their end to their WSDL( http://ipaddress:port/name/Service.svc?wsdl ).
They are telling they can only send the data to their WSDL( http://ipaddress:port/name/Service.svc?wsdl ).
They will not consume our BPEL process(I think they might be wrong at this point of time).They have one WSDL to send or push the data from their end.
The work at from our side(SOA & X application)
From that point ,our BPEL process has to receive that data and update that data into my application(X).
I hope You understand my requirement.
Can you guide me through how to achieve this task as they are telling they have to use their WSDL to push the data?
(or)
Do I need to take 'Webservice' adapter into Exposed Services Swimlane in Jdeveloper to have their webservice(third party WSDL),If it is So Can you tell me the details how to take 'input' and 'output' for BPEL process?
(or)
Can YOu suggest me to talk to them to consume my BPEL process directly?
Thanks
Edited by: 899283 on Aug 17, 2012 4:55 AM

Not able to get the data from 2LIS_04_P_ARBPL

Hi all,
I am not able to get data for info object 0Calday in PP Cube.
So I checked as per the data flow
So from Datasource 2LIS_04_P_ARBPL its not getting data for that particular object
I check in RSA3 its showing " 0 records extracted"
So I have checked in LBWE to check from which tables its getting data.
So there I found its getting data from 3 tables AFKO, AFPO and AFVG.
When I am checking the tables data am able to open AFKO and AFPO but
for AFVG its saying "No active table available".
and the infoobject 0calday is mapped with Posting date of AFVG table only.
Can anyone tell me what is the procedure to see the data in that particular table and structrure.
Regards
Sankar

Hi,
please search for the term 'filling of setup table'.
Siggi

Not able to reload the data from DB using finder methods

Hi all,

I am facing a weird problem while using finder methods.
I am using weblogic 8.1 SP3 and entity beans are CMP with DB concurrency.DB is oracle

<h4>Problem Description</h4>

I am having one session bean which internally interacts with my entity beans,
Now say my transaction is getting initiated in one of the session bean and I use some finder in it.


To make the problem more clear lets say my entity bean is loanBean with loanId as primary key.
Now say method A of session bean initiates the transaction and I use something like
 
LoanLocal loanLocal =loanLocalHome.findByLoanId(loanId);
 
Note that I am not using findByPrimaryKey method
 
now this method A calls some other method B on some session bean which is having Required as its transaction attribute.
 
But before the call of B some other thread or background process updates the DB for this loanId and commits,
 
now when I fire the same finder in method B I am still getting the old data, ie I am not getting the data which has been modified in DB and committed by some other thread, I still get the old data and when I tried to generate the SQL queries which weblogic is firing, I see
it fires the SQL for every finder other that findByPrimaryKey.
 

Now my problem is I am getting the old data only and I need the new updated data of DB. isolation-level of DB and beans is READCOMMITTED.
Note:: I cant use new transaction to read the data.

 
And I couldn't understand that when weblogic is firing query for every finder then why it should not refresh the data in its cache. Is there any way to disable this kind of caching and say that everytime when i use finder just go to DB and get me the last committed data.

 
Any help in this regard would be very helpful to me.
 
Thanks and Regards
 
Manish Garg.


Hi,
In my understanding, cache is not involved in this scenario. As you
observed, the container fires sql every time when you invoke this finder.
So, it should just give the result that it got from the DB. Is there a
possibility that the DB is using repeatable_read or serializable for
isolation level?
You can debug further by doing couple of things -
1. Instrument the code in the generated RDBMS java file for the entity bean
(if you use -keepgenerated option for weblogic.ejbc, u can get the source of
this file). This class will have the implementation for ejbFindByLoanId. You
can just print the result set data after the query is fired.
2. Try the same scenario without the ejb container. Like, write a jsp which
will start a user tx and fire the query twice such that there is an update
between the two queries. Note that, you need to use a TxDataSource to get
the JDBC connection so that it will be tx aware.
--Sathish
<Manish Garg> wrote in message news:[email protected]...
Hi all,

I am facing a weird problem while using finder methods.
I am using weblogic 8.1 SP3 and entity beans are CMP with DB
concurrency.DB is oracle

<h4>Problem Description</h4>

I am having one session bean which internally interacts with my entity
beans,
Now say my transaction is getting initiated in one of the session bean and
I use some finder in it.


To make the problem more clear lets say my entity bean is loanBean with
loanId as primary key.
Now say method A of session bean initiates the transaction and I use
something like
 
LoanLocal loanLocal =loanLocalHome.findByLoanId(loanId);
 
Note that I am not using findByPrimaryKey method
 
now this method A calls some other method B on some session bean which is
having Required as its transaction attribute.
 
But before the call of B some other thread or background process updates
the DB for this loanId and commits,
 
now when I fire the same finder in method B I am still getting the old
data, ie I am not getting the data which has been modified in DB and
committed by some other thread, I still get the old data and when I tried
to generate the SQL queries which weblogic is firing, I see
it fires the SQL for every finder other that findByPrimaryKey.
 

Now my problem is I am getting the old data only and I need the new
updated data of DB. isolation-level of DB and beans is READCOMMITTED.
Note:: I cant use new transaction to read the data.

 
And I couldn't understand that when weblogic is firing query for every
finder then why it should not refresh the data in its cache. Is there any
way to disable this kind of caching and say that everytime when i use
finder just go to DB and get me the last committed data.

 
Any help in this regard would be very helpful to me.
 
Thanks and Regards
 
Manish Garg.

The vi is identifyng the number of bytes to be read but the VISA Read vi is not able to read the data from the port.

We are trying to communicate with the AT106 balance of Mettler Toledo.The VI is attached.
We are sending in "SI" which is a standard command that is recoginsed by the balance. The balance reads it.The indicator after the property node indicates that there are 8 bytes available on the serial port. However, the VISA read VI fails to read the bytes at the serial port and gives the following error:
Error -1073807253 occurred at VISA Read in visa test.vi
Possible reason(s):
VISA: (Hex 0xBFFF006B) A framing error occurred during transfer.
The Vi is atttached.
Thanks
Vivek
Attachments:
visa_test.vi ‏50 KB

Hello,
You should also definitely check the baud rates specified; a framing error often occurs when different baud rates are specified, as the UARTs will be attempting to transmit and receive at different rates, causing the receiving end to either miss bits in a given frame, or sample bits more than once (depending on whether the receiving rate is lower or higher respectively). You should be able to check the baud rate used by your balance in the user manual, and match it in your VI with the baud rate parameter of the VISA Configure Serial Port VI.
Best Regards,
JLS
Best,
JLS
Sixclear

Not able to get the data from variables contained in more than 1 mxml file

I have got 5 Bindable Public integer variables in total in 5 mxml files (Pages). Each variable is assigned it's value in a Public function in each of the mxml files.
What I need to do is add up the values of the 5 variables. The way I approached this was to create a public function add5Variable in my main mxml file (Page1) as shown below.
[Bindable]
public var varTotal:int = 0;
public
varTotal = (variableP1 +
Page2.variableP2 + Page3.variableP3 + Page4.variableP4 + Page5.variableP5);
return(varTotal);
I have got a TextInput field on Page5 where I display the varTotal. The function add5Variable is called when moving from Page to Page.
The results I am getting is that the varTotal will always be the value of variableP1. When I tried some debugging in Flex Builder it showed me that the other 4 variables had a value of 0.
Why is this the case and do you have any suggestions on how I can get the correct total for varTotal?
Thanks
function add5Variable():int {

The code below looks correct. Is that the expected behavior of your app?
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
<mx:Script>
<![CDATA[
public var ValueP2:Number = 0;
private var grossValue:Number = 0;
private var totalValue:Number = 0;
private var finalTotalP2:int = 0;
public function test():void {
if (Number(TextInput2.text) == 1 || Number(TextInput2.text) == 2)
ValueP2 = 1;
totalValue = grossValue + ValueP2;
else if (Number(TextInput2.text) == 3 || Number(TextInput2.text) == 4) {
ValueP2 = 5;
totalValue = grossValue + ValueP2;
else if (Number(TextInput2.text) == 5 || Number(TextInput2.text) == 6) {
ValueP2 = 9;
totalValue = grossValue + ValueP2;
trace("totalValue "+totalValue);
finalValueP2(totalValue);
public function finalValueP2(tVP2:int):int {
var tallyP2:int = 0;
if (tVP2 < 3)tallyP2 = 1;
if (tVP2 >= 3 && tVP2 <5)tallyP2 = 2;
if (tVP2 >= 5 && tVP2 <10)tallyP2 = 3;
finalTotalP2 = tallyP2 * 7;
trace("finalTotalP2 " +finalTotalP2);
return(finalTotalP2);
]]>
</mx:Script>
<mx:TextInput id="TextInput2" enter="test()"/>
</mx:Application>

I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn that app back on. Would there be any way I would be able to get the data from that app?

I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn the app back on. Would there be any way I would be able to get the data from that app onto my phone? Is it possible to put an old back-up on my phone?

LukaPetranovic wrote:
Hello anita4323.
I hope this will help you with your problem:
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
You can restore your backup whenever you want from iTunes or iCloud, depending where you made it.
Let us know if you succeeded or need any further help.
I believe you are missing the point. The OP has already restored from back up, but failed to include a specific app in the back up and is trying to recover data for it, which in this case is not possible.

I have lost my contact from iphone 5 and not able to retrieve the data, however it reflects old contacts are reflected with Whats app messages

i have lost my contact from iphone 5 and not able to retrieve the data, however it reflects old contacts are reflected with Whats app messages

WWhat are you syncing your contacts with? A supported application on the computer or cloud service? They should still be there.

I m trying to manage space in my iPhone but what I find is I m not able to delete document data alone of an application without deleting the entire application ... Any other suggestions or methods to accompanish this? Any pointers welcome... Is this a bug

I m trying to manage space in my iPhone but what I find is I m not able to delete document data alone of an application without deleting the entire application ... Any other suggestions or methods to accompanish this? Any pointers welcome... Is this a bug

You mean take the cover off of the iPhone, to look inside? I'd recommend against it. Even with warranty expired, you might qualify for an out-of-warranty service, which for 3GS is $149.
Other than that, any repair/service options are going to cost money. You might want to see if a wireless carrier will let you get a new contract & phone.
Out of curiousity, you're just using at as, basically, an iPod Touch, if there's no cell provider? Did I understand that correctly?

Not able to extract performance data from .ETL file using xperf commands. getting error "Events were lost in this trace. Data may be unreliable ..."

Not able to extract performance data from .ETL file using xperf commands.
Xperf Commands:
xperf –i C:\TempFolder\Test.etl -o C:\TempFolder\BootData.csv –a process
Getting following error after executing above command:
"33288636 Events were lost
in this trace.
Data may be unreliable
This is usually caused
by insufficient disk bandwidth for ETW lo
gging.
Please try increasing the minimum
and maximum number of buffers
and/or
the buffer size.
Doubling these values would be a good first at
tempt.
Please note, though, that
this action increases the amount of me
mory
reserved
for ETW buffers, increasing memory pressure on your sce
nario.
See "xperf -help start"
for the associated command line options."
I changed page size file but its does not work for me.
Any one have idea, how to solve this problem and extract ETL file data.

I want to mention one point here. I have total 4 machines out of these 3 machines above
commands working properly. Only one machine has this problem.<o:p></o:p>
Hi,
I consider that you can try to use xperf to collect the trace etl file and see if it can be extracted on this computer:
Refer to following articles:
start
http://msdn.microsoft.com/en-us/library/windows/hardware/hh162977.aspx
Using Xperf to take a Trace (updated)
http://blogs.msdn.com/b/pigscanfly/archive/2008/02/16/using-xperf-to-take-a-trace.aspx
Kate Li
TechNet Community Support

I am not able to mail the photos from iPhoto. Its always saying that the email address it's not recognized. Another situation is that when I try to add my me account in the preferences account, doesn't recognize my @me password. Tks for any help! :-)

I am not able to mail the photos from iPhoto. Its always saying that the email address it's not recognized. Another situation is that when I try to add my me account in the preferences account, doesn't recognize my @me password. Tks for any help! :-)

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

Not able to fetch the data by Virtual Cube

Hi Experts,
My requirement is I need to fetch the data from Source System (From Data base table) by using Virtual Cube.
What I have done is I have created Virtual Cube and created corresponding Function Module in Source System.
That Function MOdule is working fine, if Data base table is small in Source System.But If data base table contains huge amount of data (millions of record), I am not able to fetch the data.
Below is the code I have incorporated in my function module.
c_th_mapping TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_TH_IOBJ_FLD_MAPPING.
DATA:
    l_s_map TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_S_IOBJ_FLD_MAPPING.
l_s_map-iobjnm = '0PARTNER'.
l_s_map-fldnm = 'PARTNER'.
insert l_s_map into table l_th_mapping.
create object l_r_srv
    exporting
       i_tablnm              = '/SAPSLL/V_BLBP'
      i_th_iobj_fld_mapping = l_th_mapping.
l_r_srv->open_cursor(
    i_t_characteristics = characteristics[]
    i_t_keyfigures      = keyfigures[]
    i_t_selection       = selection[] ).
   l_r_srv->fetch_pack_data(
    importing
      e_t_data = data[] ).
return-type = 'S'.
In the above function Module,Internal table L_TH_MAPPING contains Info Objects from Virtual Cube and corresponding field from Underlying data base table.
The problem where I am facing is, in the method FETCH_PACK_DATA, initially program is trying to fetch all the recordsfrom data base table to internal table.If Data base table so lagre, this logic is not working.
So would you please help me how to handle these kind of issues.

Hi Experts,
My requirement is I need to fetch the data from Source System (From Data base table) by using Virtual Cube.
What I have done is I have created Virtual Cube and created corresponding Function Module in Source System.
That Function MOdule is working fine, if Data base table is small in Source System.But If data base table contains huge amount of data (millions of record), I am not able to fetch the data.
Below is the code I have incorporated in my function module.
c_th_mapping TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_TH_IOBJ_FLD_MAPPING.
DATA:
    l_s_map TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_S_IOBJ_FLD_MAPPING.
l_s_map-iobjnm = '0PARTNER'.
l_s_map-fldnm = 'PARTNER'.
insert l_s_map into table l_th_mapping.
create object l_r_srv
    exporting
       i_tablnm              = '/SAPSLL/V_BLBP'
      i_th_iobj_fld_mapping = l_th_mapping.
l_r_srv->open_cursor(
    i_t_characteristics = characteristics[]
    i_t_keyfigures      = keyfigures[]
    i_t_selection       = selection[] ).
   l_r_srv->fetch_pack_data(
    importing
      e_t_data = data[] ).
return-type = 'S'.
In the above function Module,Internal table L_TH_MAPPING contains Info Objects from Virtual Cube and corresponding field from Underlying data base table.
The problem where I am facing is, in the method FETCH_PACK_DATA, initially program is trying to fetch all the recordsfrom data base table to internal table.If Data base table so lagre, this logic is not working.
So would you please help me how to handle these kind of issues.

Report exection problem for one user - not able to see the data.

Hello Friends ,
Need some help . I have got the one ticket from bussniess side about the report execution .
Unfortunately , I am also not having authorisation of that report due to sensible data.
Problem - User is executing the report but some how he is not ABLE TO see the data for one company code Hierachy .
I executed the same report through RSSMQ via his user id , and I got the below message.
All value were selected . Hierachy Authorisation cannot be used.
A displayed hierachy requier a hierachy authorisation .
But when i checked his authorisation , I am able to see that he should have authorisation to all the hireachy .
could you please let me know , how can I check more ?
Regards,

after accessing the report , u go to su53 tcode and check the authorization and u can see what is problem in authorization for the that user and u can send the details to secuity team to rectify the issue ,

Not able to Delete the data from Memory card

Similar Messages

Maybe you are looking for