Not able to do the Graphical Move Transaction in Discrete Workstation
Hi All,
I am not able to do the Graphical Move Transaction in Discrete Work Station.
Navigation: WIP>Dicrete>Discrete Work station.
When ever I am trying to move the red ball and key-in the quantity in the form I am getting a error message:
Functions not available to this responsibility.Change responsibility or Contact your system adminstrator.
Please make a note that i have not excluded any Menu in the Responsibilty using System administrator.
Please try to help me,as the isue is very critical.
Regards
S
Hi ct,
Yes you are correct. The solution is:
I have a Quality Plan which comes into effect from Run -To Move . This Quality Plan was the reason of the error . Once I disabled that, i am able to do the Graphical Move Transaction.
Regards
S
Similar Messages
-
Not able to view the graphical elements in APD
Hi Experts,
Not able to view the graphical elements for all applications such as:
Nodes
Data flow arrows
in my APD workarea.
I have all the authorization for APD according to the SAP OSS Note 919614.Hi Experts,
Any input on this?
Regards,
Meiyappan. -
Hi ALL,
I have a problem in transaction CV02N. Actually i am an ABAPER, but i need some help of PP Guys.
The requirement is as follows:-
The client says that they have uploaded a '.PS' file into the transaction cv02n.Here in the first screen they give doc, doc type,doc part, doc version. when clicked on enter it take us to second screen , where they enter the '.PS' file path under 'originals' , in the tab 'document data'. Later they goto transaction CO01 and release an order at the operation level and save it.
Then it generates a spool. Now if we goto SP01 and check the spool with the number generated during saving CO01. We will be getting the scripts and the '.PS' file separately in a different spool in the production system in 4.6. But in my new upgraded system(6.0), i am not able to view the '.PS' file in the output spool.It seems to me that, it is not getting generated. Pls suggest me, as it is a very urgent issue. Need to close it by today at 1.00pm.
Regards,
Manasa.Sdear friend,
there would be several reasons for that.
first, check out your Output Device (your user in SU01) - goto to tab Defaults and look at Spool Control.
did you tick the 'output immediately' checkbox?
Fix it if nessesary. Just in case run SPAD to check out your device.
second, check out the 'output' config for Document Management (because you use t-code CV02N).
also make sure that relevant output condition exists.
third, ask someone to do the same - another user with another output device. does he/she have the same problem?
and the last, try to find out the functional guy or documentation.
also ask your basis guy regarding the lost transports or any other issues...
do not worry, life is good.
good luck! -
i got charged twice for a movie (Safe House). Can i get a refund for that? we were not able to finish the movie last night, and now we're trying to watch it again. We have an hour left, however the apple tv is still loading the movie again for 2 hrs & 46 mins.
Welcome to the Apple Community.
Apple's policy on sales of digital content is that all sales are final. If however you wish to appeal to Apple, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History. -
I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.
1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again -
Not able to get the start constellation of the MOPZ transaction
Hello,
When I get to step 3 of the transaction MOPZ the following error message appears to me "Not able to get the start constellation of the MOPZ transaction"
How I can fix it?
Best Regards!Hello
Implementing the here under note you solve your issue
Best regards
1803377 - MOpz: Not able to get the start constellation -
If I download a .mov file from gmail, I am not able to open the file. I reinstalled QuickTime 7.6.6, still unable to open the file. If I download the same file from another mail server I have no trouble. What is gmail doing to my file?
Also i have reinstalled the reader9 two times and tried with reader8 also but in both the cases same problem.
it would be gr8 help if someone can help. -
I am not able to adjust the hight of one page on my site. I try to move the blue mark on the left side and it doesn't move. What should I do ? Thanks
Hi,
could you please try to find any blank oject like rectangle/textbox, specially at the lower end of the page. Use Edit -> "Select All" to select everything on the page, it will be easier to locate it.
Let me know if that works -
i downloaded advance cinema app from tha app store, but everytime i click on a movie, it takes me to the IMDB website and im not able to watch the movie. The app promises 4000 free movies, but not able to watch any new movies...
I have found the issue. I have not found an answer to the prob. I have put in a case with customer service. If it doesn't work right, I need my money back!!!
-
Not able to close the Org Period
Hi,
We recently upgrated from 11.5.10.2 to 12.1.3, and we are not able to close the org due to error in tables WSM_LOT_MOVE_TXN_INTERFACE and WSM_LOT_SPLIT_MERGES_INTERFACE. The records are getting reflected as 'Pending WSM interface' - Resolution Required.
These records are back dated, with year as 2007/2009 and for some Jul'11, for which period has been closed except Jul'11 which is - 'Closed not Summarized'.
Sample records are like
Pending Shop Floor Lot Split Merge Transactions WSM_LOT_SPLIT_MERGES_INTERFACE Resolution Required
Header Id Transaction Id Transaction Type,Transaction,Date,Transaction Reason,Reference,Lot,Process,Status,WIP,Flag,Split,Flag,Group Id Request Id Error Message,
1030,Lot Based Inventory,Translate,25-OCT-07 07-3547-B4 Error 2 1 1031 210415824 Invalid lot_number in Starting Lots,11547,Lot Based Inventory,Translate,25-OCT-07 07-3547-B4 Error 2 1 ,11548 211066708 Invalid lot_number in Starting Lots
Pending Shop Floor Lot Move Transactions WSM_LOT_MOVE_TXN_INTERFACE Resolution Required
587560686 2 12-MAR-09 09-4139-C1 Error 17200 50 END 999 END 20156699 290394731 Error:WSMPLBMI.MoveTransac
tion(stmt_num=240) :
Has any one faced same issues with OSFM/INV modules closing process ?
Regards
Adarsh KHi,
Please check the charecterstic of Book Area 01 in customization. If net book value has been maintained as negative, then you have to run depreciation to make it negative.
If depreciation for all asset has not been run a particular fiscal year then you cannot close the fiscal year.
Please check wheather depreciation for all additional assets has been run or not.
Hope you have understood.
Regards
Tapan -
Not able to change the data of test data containers in production system
Dear All,
We have created eCATT scripts in Development SolMan System and moved the transports to Production SolMan System. Customer wants to change the data at Test data containers and run the scripts in production system but we are not able to edit the data.
May be the reason is SCC4 transaction code has set the below option.
Changes and transports for client-specific Objects
u2022 No changes allowed
Customer doesnu2019t want to change the above option and wanted to change the test data containers to give different datau2019s and run the eCATT scripts.
Could you please let me know the solution for this?
Your help is really appreciated.
Thanks,
MahendraeCatt has the feature where you don't need to transport the scripts or test configuration to our target system. We can keep all our scripts and test data in Solman and run this script any other system in your landscape using the System data container and target system.
Maintain the production as one of the target system in System container in Solman and point that system while running the script. Change the test data in Solman to run this script.
Let me know if you need more information
thanks
Venkat -
Not able to get the connection to mssql server thro native sql
Dear Experts,
I have created a database connection to mssql server thro DBCO t.code.Am not able to get the connection when i am executing Native SQl for geting connection of mssql server.
DATA: CON_NAME LIKE DBCON-CON_NAME VALUE 'BIW'.
EXEC SQL.
CONNECT TO :con_name AS 'C1'
ENDEXEC.
Am always getting sy-subrc = 4. The user name and password i have given in dbcon table having full authorization to access mssql database. I am working SAP ecc 5.0. Also both servers are running in windows.
could anyone hlep me on this issue.
Thanks in advance.Hello, the submitted error must be analyzed according to the Syntaxis and characteristics of the MSSQL database. See explanation of error.
http://doc.ddart.net/mssql/sql2000/html/trblsql/tr_reslsyserr_1_1o1i.htm
Error 156
Severity Level 15
Message Text
Incorrect syntax near the keyword '%.*ls'.
Explanation
This error indicates that the syntax of a Transact-SQL statement is incorrect and that the syntax error was detected near the keyword specified in the error message. The most frequent causes for syntax errors are misspellings of Transact-SQL keywords or operators, and specifying the syntax of a Transact-SQL statement in the wrong order.
One of the more complicated causes for this error may be a compatibility level mismatch for the current database. If the current database has a compatibility level other than 70, Microsoft® SQL Serveru2122 will not recognize any of the keywords that a database with a compatibility level of 70 would recognize.
Action
First, check the Transact-SQL statement syntax near the keyword specified in the error message. Because Transact-SQL language syntax can be very complex, SQL Server may incorrectly report the position of the syntax error as later in the Transact-SQL statement than it actually occurred. Second, reexamine the entire Transact-SQL statement that generated the error. Verify the syntax order of the statement.
Ensure that the database does not have a compatibility level of 65 and has a compatibility level of 70. -
Not able to get the full screen in Youtube with latest firefox
Hi All,
I was using the FF 3.0.10 came with ArchLinux pacman. Recenty I downloaded the latest FF from mozilla website and put that in /opt/firefox. I am able to do all other things in it except watching the full screen flash video from Youtube. The browser stucks when I click on the full screen option. But that is working fine in the old browser ( Gran paradiso ). I am not able to find the root cause of it. An idea ?silvik wrote:launch firefox with: LD_PRELOAD=/usr/lib/libGL.so.1 firefox
Yes that helped, thanks.
But it only happened with youtube flash movies, others were able to go fullscreen.
I got the following error messages in the console after the crash (cut off):
LoadPlugin: failed to initialize shared library /home/andi/.mozilla/plugins/libmks.so [libexpat.so.0: cannot open shared object file: No such file or directory]
*** glibc detected *** firefox: munmap_chunk(): invalid pointer: 0xa8398020 ***
======= Backtrace: =========
/lib/libc.so.6[0xb7cbd281]
/lib/libc.so.6[0xb7cbe4b5]
/usr/lib/libGL.so.1[0xaa912205]
======= Memory map: ========
08048000-0805a000 r-xp 00000000 08:02 136715 /usr/lib/firefox-3.5/firefox
0805a000-0805b000 rwxp 00011000 08:02 136715 /usr/lib/firefox-3.5/firefox
0805b000-0805c000 rwxp 00000000 00:00 0
a419b000-a4f06000 r-xp 00000000 08:02 176929 /usr/lib/libGLcore.so.185.18.14
a4f06000-a50f3000 rwxp 00d6a000 08:02 176929 /usr/lib/libGLcore.so.185.18.14 -
Manager is not able to Approve the leave
Dear Freinds,
Please help me in solving this below issues.
EE has applied for leave thro ESS. Manager have recd a confirmation from Work flow system . But the same is not reflecting in Manager MSS . Therefore he is not able to approve the same . However, Manager is able to approve the leave for others.
I cheked in PO13 and the realationship and dates are perfect. Can anyone tell me what could be the reason.
IS there any T-code to check the Email communication that both had.Hi,
Please check the workflow log in the system using transaction SWI1 for the date on which the EE has applied for leave,
check the Agent assigned for approving the leave by clicking on the Agent button - confirm that this is the same manager.
Also this is assuming that in MSS under the UWL other employees leave requests are visible,
so as to eliminate portal side issues.
Regards,
Samson. -
Not able to update the project using 'BAPI_PROJECT_MAINTAIN'.
I want to create a project , with reference to an already existing project.
I am using 'BAPI_PROJECT_GETINFO' to get the data of the existing project.
The bapi gives the following:
1) e_project_definition.
2) e_wbs_element_table.
3) e_wbs_hierarchie_table
I am passing the u2018e_project_definitionu2019 to 'BAPI_PROJECTDEF_CREATE' to create project.The project is created successfully.
But I am not able to update the project with u2018e_wbs_element_tableu2019
and u2018e_wbs_hierarchie_tableu2019. I am using 'BAPI_PROJECT_MAINTAIN' to update the project.
The program is not giving an error, but it is also not updating the E_WBS_ELEMENT_TABLE and E_WBS_HIERARCHIE_TABLE.
I am attaching the code below.
*& Report ZTEST_PC.
DATA: project_definition TYPE bapipr-project_definition,
with_activities TYPE bapipr-with_activities,
with_milestones TYPE bapipr-with_milestones,
with_subtree TYPE bapipr-with_subtree,
e_project_definition TYPE bapi_project_definition_ex,
return TYPE bapireturn1.
DATA: i_wbs_element_table TYPE TABLE OF bapi_wbs_elements,
e_wbs_element_table TYPE TABLE OF bapi_wbs_element_exp,
e_wbs_milestone_table TYPE TABLE OF bapi_wbs_milestone_exp,
e_wbs_hierarchie_table TYPE TABLE OF bapi_wbs_hierarchie,
e_activity_table TYPE TABLE OF bapi_network_activity_exp,
e_message_table TYPE TABLE OF bapi_meth_message.
DATA: wa_wbs_element_table TYPE bapi_wbs_element_exp,
wa_wbs_hierarchie_table TYPE bapi_wbs_hierarchie.
DATA: l_new_proj_no TYPE prpss-posid.
DATA: l_project_definition TYPE bapi_project_definition.
DATA: l_project_definition_upd TYPE bapi_project_definition_up.
DATA: l_project_definition_stru TYPE bapi_project_definition.
DATA :l_pspnr TYPE ps_intnr,
l_pspid TYPE ps_pspid,
l_pro_def(9) TYPE c.
DATA :l_proj TYPE proj.
DATA :l_len TYPE i VALUE '0'.
DATA: lt_dd03l TYPE TABLE OF dd03l,
ls_dd03l TYPE dd03l.
DATA: fieldname(50), fieldname1(50) TYPE c.
DATA: p_ddic_name(40), struc(40), fun_struc(50) TYPE c.
FIELD-SYMBOLS: <struc>, <c>, <sc>, <def_field> TYPE any.
DATA : i_method_project TYPE TABLE OF bapi_method_project,
wa_method_project TYPE bapi_method_project.
DATA : l_index TYPE bapi_method_project-refnumber.
DATA : it_wbs_element_table TYPE TABLE OF bapi_wbs_element,
it_wbs_hierarchie_table TYPE TABLE OF bapi_wbs_hierarchie.
DATA : wl_wbs_element_table TYPE bapi_wbs_element,
wl_wbs_hierarchie_table TYPE bapi_wbs_hierarchie.
DATA : l_wbs_element_table_update TYPE bapi_wbs_element_update.
DATA : i_wbs_element_table_update TYPE TABLE OF bapi_wbs_element_update.
Get the project info of the Project 'C01.10995'
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
EXPORTING
input = 'C01.10995'
IMPORTING
output = project_definition.
CALL FUNCTION 'BAPI_PROJECT_GETINFO'
EXPORTING
project_definition = project_definition
IMPORTING
e_project_definition = e_project_definition
return = return
TABLES
i_wbs_element_table = i_wbs_element_table
e_wbs_element_table = e_wbs_element_table
e_wbs_milestone_table = e_wbs_milestone_table
e_wbs_hierarchie_table = e_wbs_hierarchie_table
e_activity_table = e_activity_table
e_message_table = e_message_table.
Automate the process the process to get the next number for the func module 'CN_SUCHE_FREIE_NUMMER'.
CLEAR : l_pspnr, l_pspnr, l_pspid, l_pro_def.
SELECT MAX( pspnr ) FROM proj INTO l_pspnr.
SELECT SINGLE * FROM proj INTO l_proj WHERE pspnr EQ l_pspnr.
l_pspid = l_proj-pspid.
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_OUTPUT'
EXPORTING
input = l_pspid
IMPORTING
output = l_pspid.
l_pro_def = l_pspid+4(5) + 1.
CONDENSE l_pro_def.
CONCATENATE 'C01.' l_pro_def INTO l_pspid .
function module to generate the nect free number between the given range.
CALL FUNCTION 'CN_SUCHE_FREIE_NUMMER'
EXPORTING
search_imp = '2'
prps_s_imp = l_pspid
prps_e_imp = 'C01.29999'
no_dialog = 'X'
IMPORTING
prps_exp = l_new_proj_no.
IF sy-subrc <> 0.
EXIT.
ENDIF.
Update the fields of 'l_project_definition_upd' as 'X' for the fields which has values in 'E_PROJECT_DEFINITION'.
Get the New Project Number.
MOVE-CORRESPONDING e_project_definition TO l_project_definition.
l_project_definition-project_definition = l_project_definition-project_definition+0(3).
l_new_proj_no = l_new_proj_no+4(5).
CONCATENATE l_project_definition-project_definition '.' l_new_proj_no INTO l_project_definition-project_definition.
TRANSLATE l_project_definition-project_definition TO UPPER CASE.
MOVE-CORRESPONDING l_project_definition TO l_project_definition_stru.
Create the New project with the New project Number.
CALL FUNCTION 'BAPI_PROJECTDEF_CREATE'
EXPORTING
project_definition_stru = l_project_definition_stru.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = ' '.
Populate internal table i_method_project for the bapi_project_maintain func module.
CLEAR : wa_wbs_element_table,wl_wbs_element_table,wa_wbs_hierarchie_table,
wl_wbs_hierarchie_table, it_wbs_element_table, it_wbs_hierarchie_table.
CLEAR : wa_method_project, i_method_project, l_index .
l_index = 0.
LOOP AT e_wbs_element_table INTO wa_wbs_element_table.
MOVE-CORRESPONDING wa_wbs_element_table TO wl_wbs_element_table .
APPEND wl_wbs_element_table TO it_wbs_element_table .
wa_method_project-objecttype = 'WBS_ELEMENT'.
wa_method_project-method = 'CREATE'.
wa_method_project-objectkey = wa_wbs_element_table-wbs_element.
l_len = strlen( wa_wbs_element_table-wbs_element ).
Setting Levels as reference number.
CASE l_len.
WHEN '9'.
l_index = 1.
WHEN '12'.
l_index = 2.
WHEN '15'.
l_index = 3.
WHEN '18'.
l_index = 4.
ENDCASE.
wa_method_project-refnumber = l_index .
TRANSLATE wa_method_project-objectkey TO UPPER CASE.
APPEND wa_method_project TO i_method_project.
CLEAR :wa_method_project, l_index.
ENDLOOP.
l_index = l_index + 1.
wa_method_project-refnumber = ' '. "l_index .
wa_method_project-objecttype = ' '. "'WBS_ELEMENT'.
wa_method_project-method = 'SAVE'.
wa_method_project-objectkey = ' '.
APPEND wa_method_project TO i_method_project.
CLEAR wa_method_project.
LOOP AT e_wbs_hierarchie_table INTO wa_wbs_hierarchie_table.
MOVE-CORRESPONDING wa_wbs_hierarchie_table TO wl_wbs_hierarchie_table.
APPEND wl_wbs_hierarchie_table TO it_wbs_hierarchie_table.
ENDLOOP.
Update the fields of 'l_project_definition_upd' as 'X' for the fields which has values in 'E_PROJECT_DEFINITION' respectively.
CLEAR : l_project_definition_upd.
p_ddic_name = 'BAPI_PROJECT_DEFINITION_UP'.
struc = 'l_project_definition_upd'.
fun_struc = 'E_PROJECT_DEFINITION'.
TRANSLATE: p_ddic_name TO UPPER CASE,
struc TO UPPER CASE.
SELECT * FROM dd03l INTO TABLE lt_dd03l WHERE tabname = p_ddic_name.
LOOP AT lt_dd03l INTO ls_dd03l.
ASSIGN ls_dd03l-fieldname TO <c>.
fieldname = ls_dd03l-fieldname .
CONCATENATE fun_struc '-' fieldname INTO fieldname.
ASSIGN (struc) TO <struc>.
ASSIGN COMPONENT <c> OF STRUCTURE <struc> TO <sc>.
ASSIGN (fieldname) TO <def_field>.
IF NOT <def_field> IS INITIAL .
<sc> = 'X'.
ENDIF.
ENDLOOP.
Update the fields of 'l_wbs_element_table_update' as 'X' for the fields which has values in 'e_wbs_element_table' respectively.
READ TABLE e_wbs_element_table INTO wa_wbs_element_table INDEX '1'.
CLEAR : l_wbs_element_table_update, fieldname1, p_ddic_name, struc, fun_struc .
p_ddic_name = 'BAPI_WBS_ELEMENT_UPDATE'.
struc = 'l_wbs_element_table_update'.
fun_struc = 'WA_WBS_ELEMENT_TABLE'.
TRANSLATE: p_ddic_name TO UPPER CASE,
struc TO UPPER CASE.
SELECT * FROM dd03l INTO TABLE lt_dd03l WHERE tabname = p_ddic_name.
LOOP AT lt_dd03l INTO ls_dd03l.
ASSIGN ls_dd03l-fieldname TO <c>.
fieldname = ls_dd03l-fieldname .
CONCATENATE fun_struc '-' fieldname INTO fieldname.
ASSIGN (struc) TO <struc>.
ASSIGN COMPONENT <c> OF STRUCTURE <struc> TO <sc>.
ASSIGN (fieldname) TO <def_field>.
IF NOT <def_field> IS INITIAL .
<sc> = 'X'.
ENDIF.
ENDLOOP.
Append the value of l_wbs_element_table_update TO the table i_wbs_element_table_update for Bapi_project_maintain.
CLEAR i_wbs_element_table_update.
APPEND l_wbs_element_table_update TO i_wbs_element_table_update.
CALL FUNCTION 'BAPI_PROJECT_MAINTAIN'
EXPORTING
i_project_definition = l_project_definition
i_project_definition_upd = l_project_definition_upd
TABLES
i_method_project = i_method_project
i_wbs_element_table_update = i_wbs_element_table_update
i_wbs_element_table = it_wbs_element_table.
i_wbs_hierarchie_table = it_wbs_hierarchie_table.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = ' '.
Please help me to solve the issue.I am not sure why it is not working?? Try for any other alternate function modules.
But i see one issue with your coding, always check the return table message type and use commit work, instead of sy-subrc check. This fails for BAPI's
Maybe you are looking for
-
Applications not working after upgrade from apex 3.2 to apex 4
hi, we've created an application with apex 3.2 which works fine. today we upgraded apex 3.2 to apex 4. after the upgrade the application doesn't work anymore. we recognized the following things: - interactive reports don't work anymore - tabs don't w
-
Brand new 80gb! very frustrated?!?!
i have a brand new ipod classic 80 gb. i had a 30 video and absolutely loved it, but it was stolen in a vehicle robbery and this is my replacement. when i hook it up, i am given a message that the ipod "ipod" requires itunes 7.4 or later and to downl
-
Is there an upgrade price for Lightroom 6
Past versions of LR offered an upgrade price but I haven't found such a price for LR6. I wanted to contact Customer Service by eMail as I've already purchased LR and thought I'd "appeal" my issue but I cannot find a customer service eMail address.
-
Can i make XML callbacks in JAVA?
Hello all. I have a java server (running with Oracle Application Server), that performs a simple task. Clients sends XML's to the server's servlets (XML over HTTP), the server does some manipulation on the data, and sends an XML reply. My servlets al
-
ITunes becomes unresponsive when syncing !! HELP??
Ive posted this problem several times over the passed few months or so and I have never gottan a response. So Im gonna try one more time LOL ! Upon connecting my iPod Touch 4 and sync it with iTunes, it starts off fine then freezes and iTunes become