Not able to enable web access (http server) on 5500

Hi
i have 5500 Swtich iam not able to enable http server in it
the message show below
Core-Switch> (enable) show ip http
HTTP Information
HTTP server: disabled
HTTP port: 800
Web Interface: Not supported
HTTP active sessions: 0
Core-Switch> (enable) show ver
WS-C5500 Software, Version McpSW: 5.5(18) NmpSW: 5.5(18)
Copyright (c) 1995-2002 by Cisco Systems
NMP S/W compiled on Dec 16 2002, 15:34:48
MCP S/W compiled on Dec 16 2002, 15:30:03
System Bootstrap Version: 3.1.2
Hardware Version: 1.4 Model: WS-C5500 Serial #: 069062010
Mod Port Model Serial # Versions
1 2 WS-X5530 008731527 Hw : 1.8
Fw : 3.1.2
Fw1: 4.1(1)
Sw : 5.5(18)
WS-F5520 008715296 Hw : 1.1
WS-U5533 009612560 Hw : 1.0
2 2 WS-X5530 008146970 Hw : 1.5
Fw : 3.1.2
Fw1: 3.1(2)
Sw : 5.5(18)
WS-F5520 007590229 Hw : 1.0
WS-U5533 009613415 Hw : 1.0
3 24 WS-X5234 022374107 Hw : 1.0
Fw : 4.5(2)
Sw : 5.5(18)
4 24 WS-X5234 018022744 Hw : 1.0
Fw : 4.5(2)
Sw : 5.5(18)
5 24 WS-X5234 018025296 Hw : 1.0
Fw : 4.5(2)
Sw : 5.5(18)
6 24 WS-X5234 017582607 Hw : 1.0
Fw : 4.5(2)
Sw : 5.5(18)
7 24 WS-X5234 017919621 Hw : 1.0
Fw : 4.5(2)
Sw : 5.5(18)
10 1 WS-X5304 024975347 Hw : 7.7
Fw : 20.22
Fw1: 3.1(1)
Sw : 12.1(20)

have you run the 'set ip http server enable' command at the CatOS CLI of the 5500?
as you've shown above, it is currently disabled
does the switch have an ip address assigned to interface SC0? does SC0 belong to an inactive VLAN?
if the switch OS does not support it, it should display an error as follows when you type in the command: (as shown below)
console> set ip http server enable
Feature not supported on the system.

Similar Messages

Not able to open web analysis reports after upgradation

we have upgraded Hyperion 11.1.1.3 to 11.1.2.2 version, after this process we are not able to open web analysis reports
These reports are still pointing to old servers so, how to edit this database connection details in the new version??
Edited by: 1007326 on May 22, 2013 3:29 AM

Hi,
Welcome to Forums...!
I think we need to change the database connection details in the Web analysis.
goto file --> Edit --> browse the database connection then change the server name in the connection details.
may be this will help to resolve your issue.
Thanks,
mady

HT4436 I am using IOS 4.1 in Ipod touch. I would like to take my data back using icloud. I am not able to enable icloud in to my ipod touch. please help me for the same.

I am using IOS 4.1 in Ipod touch. I would like to take my data back using icloud. I am not able to enable icloud in to my ipod touch. please help me for the same. Basically I am trying to take back to upgrade my ios to 5 or 6 version.

You can't back up to iCloud until you update to iOS 5 or higher. You will have to back up your iPod on your computer using iTunes. Update iTunes on your computer to the latest version, then connect your iPod to your computer, open iTunes, if iTunes give you a pop-up asking if you want to update your iPod, decline. Then click on the name of your iPod in iTunes, go to File>Devices>Transfer Purchases to transfer any purchased media to your iTunes library. Next, go to the Summary tab of your iTunes sync settings and click on Back Up Now to back up your iPod on your computer.
When it's done backing up, click on Check for Update (or Update) on the Summary tab of your iTunes sync settings. Allow your iPod to update, and leave it connected to your computer. At the end, it will restart and give you the option to restore to the iTunes backup you made earlier. Choose this option to restore your backup and sync your apps and other iTuens media to your phone.
This process is outlined in this article: http://support.apple.com/kb/HT4972, under "If you are attempting to update using a Mac or PC with which you normally sync".

Not able to Enable the Custom Ribbon button On Pages in Sharepoint 2013

Hi Team,
Not able to Enable the Custom Ribbon button On Pages in SharePoint 2013. we have used the button edit properties section of the Pages.
Same is working for Lists but not for Pages.
Thanks,
Shrikant

Thanks for your reply.
Right now my server is not working to get the code. will share you in some time.
I am just thinking if page get checked out and my control is also present in the Edit properties section then do I need to specify something explicitly to enable the button. The same is working for Lists.

Not able to export web analysis report to excel smart view from workspace

Not able to export web analysis report to excel smart view from workspace.
Error :Web launch operation has been cancelled.
Can anyone help me to resolve this issues

I realized that I can put a block in WebI and then I can pull that in excel alongside of static header, after putting the question.
My interest to know whether it is by design in XI 3.0 or it is an issue. But by the replies it seems to me like it is by design.
@Anis: I can't go for header as part of Body. Because this report is viewed in Web by many other users. I can't have separate report for Live office, it is a restriction for me. If I use the header in body, it wont look good I guess.

Not able to drag WEB items into the Layout. What can be the issue?

Hi all
I am not able to drag WEB items into the Layout. Is it a Basis issue? Or some changes in the settings need gto be done.
Thanks

Solved my own problem. Didn't realize I had to export the preview file from iBooks author. Once I did that, I was able to select that file within the preview box.

Not able to set up the preview server

I've referred ATG documentation for preview server setup, tried to set up the preview on BCC.
Please find the steps I've followed to set up preview.
1) Added the store module t as a required module to the versioned module, so that my versioned ear include all the pages of preview in my versioned EAR.
2) Added the 'preview' layer to the runAssembler while creating the build.
3) Created the preview configuration files as mentioned below.
PreviewHost.properties
==============
$class=atg.service.preview.PreviewHost
hostName=localhost
port=8380 #port where my BCC is running
PreviewManager.properties:
=================
$class=atg.remote.commerce.assetmanager.preview.service.MerchandisingPreviewService
# Explicitly sets the document.domain property in both the BCC page
# and the preview page to "oracle.com"
previewDomain=localhost
defaultPreviewUserId=123456 # This is existing user profile id.
PreviewPath.properties:
==============
$class=atg.service.preview.PreviewPath
# Explicitly sets the document.domain property in both the BCC page
# and the preview page to "oracle.com"
defaultPath=/myAppContext/
PreviewURL.properties:
==============
$class=atg.service.preview.PreviewURL
name=PreviewURL
host=/atg/dynamo/service/preview/PreviewHost
path=/atg/dynamo/service/preview/PreviewPath
types=ProductCatalog=product|category
PreviewURLManager.properties:
===================
$class=atg.service.preview.PreviewManager
previewURLs=/atg/dynamo/service/preview/PreviewURL
4) Now created the Ear with the required modules for versioning and preview.
Application is starting without error, but when I access my application at "http://localhost:8310/myAppContext" I'm getting the following error.
HTTP Status 403 - An attempt was made to preview a project without logging in as a user with access to publishing assets. If you are running a local preview instance, the preview URLs registered with the PreviewURLManager may be misconfigured. Ensure that the preview URLs are configured with the same host and domain name used to access the BCC server. This preview request URL is: http://localhost:8380/myAppContext/. If you are running a remote preview instance, the Preview feature does not support remote preview on servers running the BCC. Ensure that the remote preview instance is not running any of the BCC related modules. If you received this error and did not try to perform a remote preview, then you may need to disable preview in the current web application by setting the atg.preview context parameter to false in the webapps web.xml file.
Note: I've enabled the preview for my versioned and non-versioned applications.
Can anyone suggest me what went wrong in my configuration?. Please provide the steps you have followed to set up the preview for your application.
Your help is very much appreciated.
Edited by: 989774 on Feb 22, 2013 7:09 AM

I've tried this solution, but the problem is not resolved. Is there any alternate solution available?

Not able to run web dynpro application from portal.

Hi portal experts,
I want to run my web dynpro application from portal.
So created a seperate iview and a role for the purpose.
Assigned the iview to the role and also mapped a abap user id to the new role created.
But when I click on 'preview' the iview , getting the following dump.
Error when processing your request
What has happened?
The URL http://mnghcmsap:8000/sap/bc/webdynpro/sap/zhr_cp_admin/ was not called due to an error.
Note
The following error text was processed in the system HRM : Die URL enthält keine vollständige Domainangabe (mnghcmsap statt mnghcmsap.<domain>.<ext>).
The error occurred on the application server mnghcmsap_HRM_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: STARTUP_CHECKS of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system HRM in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server mnghcmsap_HRM_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server mnghcmsap_HRM_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 200 -u: INF51515 -l: E -s: HRM -i: mnghcmsap_HRM_00 -w: 0 -d: 20110209 -t: 121224 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please let me know if I am doing the process correctly and also let me know if I am missing somthing.
Thanks,
Aditya.

Are you able to run teh web dynpro application independtly i.e. without creatin an iview.
http://mnghcmsap:8000/sap/bc/webdynpro/sap/zhr_cp_admin/ by using this link.
or there also you are getting the error.
i guess there also you should be gettign the error.
this is some problem with the FQDN settings in the abap system.
in the host name of the web dynpro applciation server one .(dot) is must.
so you might have to change the host name to some thing like mnghcmsap. from mnghcmsap
thanks
sarbjeet singh

SSRS 2012 some users are not able to edit reports in the server

Hello All,
I am install reporting services SharePoint native mode but some users are not able to edit reports on server error is "Application cannot be started contact your application vendor" but this users edit reports on their client machine
using report builder 3.0.
Please help me

Hi harshad_mule,
Because Report Builder in the Report Manager is a ClickOnce application, the error message means that one or more of the files listed in the application manifest cannot be found on the server, so the application cannot be started. Based on my research, frequently
this means that the application is somehow corrupted, or that the ClickOnce store is corrupted.
To fix this issue, we can try to refer to the following steps:
If Report Builder is corrupted, we can update the Reporting Services to repair this.
Check that the Report Builder application is existing
Open the Report Server folder. By default, the folder is located in: C:\Program Files\Microsoft SQL Server\MSSQL.<X>\Reporting Services\ReportServer\ReportBuilder
Make sure the file "ReportBuilder.application" is existing in the folder mentioned above.
If it is existing, please use the following URL to access the Report Builder directly:
http://<server>/ReportServer/ReportBuilder/ReportBuilder.application
And this issue can also be caused by browser. Because not all report functionality is supported by all browsers in Reporting Services. So please use IE browser to start Report Builder to try it again.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Not able to connect to Lotus Domino server using java/corba

Hi
I am new to Lotus Domino server and Java.
I have INstalled Lotus Domino server5 on 1 machine and was successful in installing the Lotus client on another machine.
Throught the lotus client i am able to connect to the server and send and receive the mails.
Now I want to connect to the domino server using the Lotus Domino Tolkit for Java/Corba.
In this Toolkit they have given the sample code program ..
if I run the code I am getting the error
java.io.FileNotFoundException: http://<IPADDRESS>/diiop_ior.txtjava.io.FileNotFoundException: http://<IPADDRESS>/diiop_ior.txt
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLCon
nection.java:691)
at java.net.URL.openStream(URL.java:942)
at lotus.domino.NotesFactory.getIOR(NotesFactory.java:314)
at lotus.domino.NotesFactory.createSession(NotesFactory.java:66)
at IntroCorbaApp.run(IntroCorbaApp.java:65)
at java.lang.Thread.run(Thread.java:539)
lotus.domino.NotesException: Could not get IOR from HTTP Server
lotus.domino.NotesException
at lotus.domino.NotesFactory.getIOR(NotesFactory.java:344)
at lotus.domino.NotesFactory.createSession(NotesFactory.java:66)
at IntroCorbaApp.run(IntroCorbaApp.java:65)
at java.lang.Thread.run(Thread.java:539)
I also tried to find this file in the Domino server directory.
The file exists in drive:\LotusServer\Domino\Data\Domino\HTML directory..
I am not getting what exactly is the Problem
Plz any one help me in this regard..
thanks in advance

You should be able to access the diiop_ior.txt file from browser without authentication,only then it will work. This file should not
be protected.

Clients not able to connect to MS exchange server over a cisco switch

Hello,
I have a Cisco L3 switch.
I have a Exchange server and until i split the network into every thing was working ok, meaning the clients can connect to the Exchange without issues.
But after i split the network into 2 vlans, moving the exchange in one vlan and the clients in another vlan, i have complains saying that the users are not able to connect to exchange periodically.
Even users from the same subnet also cannot connect to the exchange often.
Meaning the clients can connect to the exchange and suddenly it will stop working. at the same time i can ping the exchange and that shows there is no routing issue or LAN issue.
But still clients cant connect to the exchange, when i reboot it will start working again for some time.
wondering whether it could be related to any network related issue or MTU or PMTUD issues.
The whole issue started only after we split the network into two vlans.

If you have physical access to the switch, it may save time to look at the port LEDs which give you the link status or may indicate an error condition (if red or orange). The table below describes the LED status indicators for Ethernet modules or fixed-configuration switches:
http://www.cisco.com/en/US/customer/products/hw/switches/ps700/products_tech_note09186a008015bfd6.shtml

Hi i am not able to retrieve web/internet history please help. my Internet service provider advise me to contact you.

for some reason i am not able to retrieve or view my web/internet history please help

Is the history enabled?
To see all History and Cookie settings, choose:
*Tools > Options > Privacy > Firefox will: "Use custom settings for history"
*https://support.mozilla.org/kb/Options+window+-+Privacy+panel
Do you see any history in the History Manager (Library; Show All history)?
*Tap the Alt key or press F10 to show the Menu Bar
There is also a History button in the "3-bar" Firefox menu button drop-down list.

Not able to enable SSH user equivalency for RAC on RHEL 4

Hi All,
I am trying to install oracle RAC 11g on RHEL4 (on VMware), I am using below document for reference.
http://www.oracle-base.com/articles/11g/OracleDB11gR1RACInstallationOnOEL5UsingVMware.php
Every thing went fine till "SSH user equivalency", but I am not able to SSH and SCP between servers without entering passwords.
I have tried removing .ssh folder & recreating pub file twice but it did not helped.
am i missing something?
Please advice.
Thanks,
Abhay.

Configure SSH on each node in the cluster. Log in as the "oracle" user and perform the following tasks on each node.
su - oracle
mkdir ~/.ssh
chmod 700 ~/.ssh
/usr/bin/ssh-keygen -t rsa # Accept the default settings.
The RSA public key is written to the ~/.ssh/id_rsa.pub file and the private key to the ~/.ssh/id_rsa file.
Log in as the "*oracle*" user on RAC1, generate an "authorized_keys" file on RAC1 and copy it to RAC2 using the following commands.
su - oracle
cd ~/.ssh
cat id_rsa.pub >> authorized_keys
scp authorized_keys rac2:/home/oracle/.ssh/
Next, log in as the "oracle" user on RAC2 and perform the following commands.
su - oracle
cd ~/.ssh
cat id_rsa.pub >> authorized_keys
scp authorized_keys rac1:/home/oracle/.ssh/
The "authorized_keys" file on both servers now contains the public keys generated on all RAC nodes.
To enable SSH user equivalency on the cluster member nodes issue the following commands on each node.
ssh rac1 date
ssh rac2 date
ssh rac1.localdomain date
ssh rac2.localdomain date
exec /usr/bin/ssh-agent $SHELL
/usr/bin/ssh-add
You should now be able to SSH and SCP between servers without entering passwords.
hope, this may helps you.
enjoy.
if you are unable to resolve it, please refer:-
http://download.oracle.com/docs/cd/B28359_01/rac.111/b28252/preparing.htm#BGBBDHIB
http://dsstos. blogspot.com/2009/03/linux-oracle-rac-and-bonding-conundrum.html

Not able to schedule Webi and Crystal reports in Infoview

Hi All,
We are using Business Objects XI 3.1.
I am not able to schedule reports in Infoview irrespective of the report type.
The Webi report throws the error "Bad Request(Invalid URL)" when I hit on the Format Destination section.
The Crystal report without prompt hangs when I hit schedule button and the report with prompt throws the error "An error has occurred:Invalid postback or callback argument."
Recently we installed the Fixpack 1.2 for XI 3.1.
Thanks in Advance
Umesh

Hi Kilic,
You mean to say re-install the Java version.
Also there is issue in IIS Server. It always encounters a problem and stops. I have to restart the IIS Server. How to deal with these issues? Very confused
Thanks and Regards,
Umesh Jadhav
Edited by: umesh jadhav on Mar 27, 2009 10:07 PM

Attachments not working for Outlook Web Access / SL Safari 4.0

Web access to my corporate email via browser: "Microsoft Outlook WebAccess". Able to choose file(s) for attachment, selection appears to work (displays file name) but attachment is not made; it doesn't show up on the message either for the recipient or on the message in my 'sent mail' folder.
Worked prior to Snow Leopard install. Fails consitently now. Logged a ticket with Apple.
Anyone else? Ideas?

I have users on MS-OWA who have lost the reply and forward facilities with Safari. They get a new mail blank form (ie with no content) when hey attempt these commands. Firefox works...
Will try my 10.6.7 to see if there is a fix with the Safari upgrade

Not able to enable web access (http server) on 5500

Similar Messages

Maybe you are looking for