Not able to enter data in query designer
hi
can any one help, i created a input ready query on multi provider contain both standered and real time cube, here real time cube not contain any data.
when i created layout by taking 2 chracteristics and 2 key figures from real time cube it give me like " no data available".
what i have to do here to enter data to realtime cube key figure
First check if you have created aggregate level.
Second check the loading behavior setting on the Realtime infocube- it must be set to "Real- Time Data Target can be planned, data loading not allowed'.
Third, query must be also input ready- in other words set the Selections (key figures) to input ready in Query designer.
Finaly, when you open context menu over the query, Bex Analyzer' Analysis grid, you can check the input ready settings for every cell if you want. If you did all steps, mentioned in the text above, input ready check box will be automatically checked for every cell of input enabled keyfigures...
Alex.
Similar Messages
-
Not able to access data in Query
Hi,
I have loaded data using DTP from 2 different source systems.
One is 3.x emulated datasource and the other is New 7.0 datasource.I have loaded data sucessfully in to DSO.Built a query on same.
But when iam executing the query by material as selection criteria.Iam not able to found data in query from one source system.The same data is available in DSO.Please needed in this regard.Hi Venkat,
After extracting data into DSO check the request whether active or not.
Check data in DSO in contents.
If is there any restrictions on info providers in Queries.
Let us know status clearly.......
Reg
Pra -
Not able to input data in query analyzer
Hi buddies,
I am working on IP.I have created a input ready query.For few values of company code there is no transaction data available,but it should show us blank so that I can atleast punch data.I am able to punch data for company codes for which transaction data is avilable .For remaining company codes for which transaction data is not availbale it is showing yellow coloured rows not allowing to input data.
Solutions would be really appreciated.This is high priority issue.
With regards,
LalithaHi,
1) if you have no transaction data, it will not show you the company codes, unless you select in your query definition "master data' instead of posted values in the query properties (for company code)
2) yellow lines are subtotals.... To enable it input ready
- set query to input ready in query properties
- set row to plannable in query properties
- very important: make sure each characteristic of your aggregation level has a unique value either in the filter definition or in the definition of your rows or columns. If not, your query will not be plannable
D -
Not able to enter data in Function module
Hi,
I have created a function module with import parameter as a table.
I have executed the function module from SE37 and tried to enter the data in the table.
If I click the table...its not showing new line...its displaying a message that "THE OBJECT CAN ONLY BE DISPLAYED"
I dont thinkso taht I have done a setting like this...
please help me what might be the problem...Hi All,
the issue has been resolved.
data can be changed only if the internal table creation is not in the form of SORTED table.
the internal table entries should not refer dataelement of type STRING.
because of these two things, I was not able to edit the internal table in the function modul.
thanks for ur replies.
Sumithra -
Not able to see Data in Xcelsius 2008
Hi everyone,
My question is I am not able to see data in Xcelsius spreadsheet although I am able to connect to SAP BW and also able to see and select query but when I select Cross Tab Data in output Values it is not displaying in Xcelsius spreadsheet
System Info
Xcelsius 2008 Enterprise Trial Version SP 3.0
SAP BW 7.1 SP 6 ABAP and JAVA
Any help would be appreciatedHi Rashid,
When you are using the BW conenction in Xcelsius you will not see any data in the spreadsheet at design time or at preview time.
To see the data you need to go SAP > Publish, then SAP > Launch to test the dashboard in the NetWeaver Portal as that is the only place where the data can be viewed.
Regards
Matt -
Hi
My Mac book pro is behaving strangely. I am not able to enter the Password and can't open any application/folder. To log-in I have to give forced shutdown. When ever I try to open any application the screen turns grey (some times) and the window pop up " --------- quit unexpectedly".
I updated the OS too from the available updates but the problem persists. I have reasonable amont of data in it, which definitely I do not want to loose.
Kindly let me know how can I come out of the above scenario?Hi Susan,
In that case I will recommend that you consult a local technician/IT team and see if there is some network connectivity issue with your machine.
- Abhishek Maurya -
Hi
In portal i want ot design news for that i want to use xml form builder so i clicked on content management xml form builder is opened i have created a new project when i saved i recived an error but still i clicked yes and it is saved anyways now when i clicked on data schema to open data model iam unable to open it symbol is remaining as it is
can any body please let me know why ia m not able to open data schema to create data model.
thanks in advance.Hi Krishna,
Please follow below link it has detail steps to create xml form builder project.
Also, check your jre version as well.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/ee639033-0801-0010-0883-b2c76b18583a?QuickLink=index&overridelayout=true
Thanks.
Sushil -
Hi All,
I have a requirements to read data based on t.code S_AHR_61016403 by using Trip Begins On date and filter by receipt date therefore I’m using DS 0FI_TV_01 and able to get data into Cube level correctly.
In Query designer, I have to use trip beginning date and filter by receipt date then put in MTD and YTD bucket based on receipt date.
For example, trip beginning date 01.07.2014 – 31.07.2014, could get 100 records which has different months data with total amount1500/- but based on receipt date 01.07.2014 – 31.07.2014 there are only 75 records with total amount 1000/- I only interested total value 1000/-
I’m thinking to create a Key Date in query designer to read beginning date range and receipt date range.
Can anybody give how to achieve this.
regards
Naani0FI_TV_01 is a transaction datasource. Hence your Trip begin/Enddates are transactional data. You cannot use them as part of Key date in Query designer.
One more thing, you can't use ranges in Key date. It works only with single date.
you have to either create two variables in query filter. or restrict your KF with both variables. -
I want to be able to enter data from my pc to my ipod touch
I want to be able to enter data from my pc to my ipod touch. Pleas advise if possible, and what app or progran i need.
Not sure if there's an app for Windows. Pages (a word processing app) is available for the Mac and iPod Touch, iPhone and iPad and it fits your requirement.
-
Not able to View data in .CSV file
Hi,
I am using some java script to display data conditionall, for color coding purpose but when i try to download the data to an spread sheet i am not able to do that please suggest me how to export fix this bug
select
case
TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2)
= :P15_EV_LCLthen
'<span style="background-color:lightgreen">'|| TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || '</span>'
else
'<span style="background-color:red">'|| TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || '</span>'
end "Effort"
from actuals Z
If i try to extract actuals it shows blank not able to extract data please suggest me how to fix this issue.
Thanks
SudhirHi,
I have no problem with item :P15_EV_LCL this is having a value my probem here is i am using java script to display the value in different color based on the condtion case
eg:
select
case
TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2)
= :P15_EV_LCL
then
span style="background-color:lightgreen"
|| TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
else
span style="background-color:yellow"
|| TRUNC(
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
end "Effort"
from actuals Z
If i dont use this <Span style="Background-color:color"> i am able to generate data in excel sheet if i use this color coding i am not able to get data in spread sheet.
Please suggest
Thanks
Sudhir
Edited by: Sudhir_N on Mar 23, 2009 10:00 PM -
Not Able To View Data in Web Service Model
Hi ,
I m trying to view a table using web service model.
When i write the same code for binding it to context , i m able to view its data.
But not so while using Web Service Model(not adaptive web service model).
The code is:
Request_ZMANAGE_MAKT_ZMANAGE_ZMAKT object1 =new Request_ZMANAGE_MAKT_ZMANAGE_ZMAKT();
wdContext.nodeRequest_ZMANAGE_MAKT_ZMANAGE_ZMAKT().bind(object1);
object1.setResponse(new Response_ZMANAGE_MAKT_ZMANAGE_ZMAKT());
CAn anybody plz solve my problem.
Thanks..
Regards,
AnkitaHi,
I have no problem with item :P15_EV_LCL this is having a value my probem here is i am using java script to display the value in different color based on the condtion case
eg:
select
case
TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2)
= :P15_EV_LCL
then
span style="background-color:lightgreen"
|| TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
else
span style="background-color:yellow"
|| TRUNC(
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
end "Effort"
from actuals Z
If i dont use this <Span style="Background-color:color"> i am able to generate data in excel sheet if i use this color coding i am not able to get data in spread sheet.
Please suggest
Thanks
Sudhir
Edited by: Sudhir_N on Mar 23, 2009 10:00 PM -
Not able to see data in Pivot table
Hi,
I have a issue with pivot table i have a column which displays values 0 and 1 and another column called month when i am placing this month column as a section and values column as a measure i am not seeing any values means i can see the month as header but instead showing 0 or 1 its showing blank columns. previously i created similar kind of table it worked but at that time values column data type is number this time its char. can anybody help me out how i can see the data in the pivot table. i already tried converting this column to number but still i am not able to see data in that values column.
ThanksHi copter,
Place the month column in rows and value column in measure section and check if results are coming.If still it doesnt come i suppose you dint apply aggregation rules to value column.In pivot view click values column and aggregate by /select min or max or either server complex and check your results.
(I suppose your aggregation rules is default)....Correct this one and you can place it in sections as per your requirement.
Cheers,
KK -
Not able to see data in 0FIGL_V30 & 0FIGL_V31
Hi,
I've activated / installed standard business content for EpH3 i.e Mutltiprovider 0FIGL_M30 and entire data flow which includes reports and virtual providers 0FIGL_V30 & 0FIGL_V31.
I'm able to see data in cubes where above virtual providers read data from. here is the link from help.sap.com
http://help.sap.com/erp2005_ehp_03/helpdata/EN/6b/fdc62d9e0b444cb14b7f424d9f9cb7/frameset.htm
Issue is i'm not able to see data in Virtual providers 0FIGL_V30 & 0FIGL_V31 and hence in reports.
Can anyone advice please. thanks
SDHi All,
Yes I've checked data in underlying cubes.
Mulitprovider is fine.
I've added Master Data for both 0GL_ACCTP and 0ACCESSTP
RFC connection is fine.
No DTP & Transformation since this is Virtual Provider based on Functional Module.
However when I debug FM for 0FIGL_V30 & 0FIGL_V31 - I see no data and thought there might be master data issue b/w 0GL_ACCOUNT & 0GLACCEXT but MD is fine.
It just not pulling data.
Is there some setting I'm missing?
FM's used for Virtual Providers are
0FIGL_V30 - RS_BCT_FIGL_SREP_DATA_GET_V30
0FIGL_V31 - RS_BCT_FIGL_SREP_DATA_GET_V31
SD -
Not able to save data in pa30 action infotype in production
Hi,
In my organization users are not able to save data in SAP HR pa30 action info type in production.
It is gets hanged and throws run time error after run long time .
in ST22 it will give below error:
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Information on where terminated
Termination occurred in the ABAP program "SAPLRHAS" in "FILL_STRU_TURBO"
The main program was "MP000000 ".
In the source code you have the terminated point in line 759
of the (Include) program "LRHASF00".
Thanks and regards,
TarunHi,
Pls check your relationship of reporting postions and set up relationship A002 and also check organization relationship
otherwise take help form ABPERs and debug and partiuclar prorgram and where and witch object its throwing
error found out.
Regrads,
Tarun -
Not able pass the data from component to other component.
Hello All
I am not able pass the data from component to other component.
I have done like this.
1 Main Component (Parent component ) having below two child components.Embeded as used components.
2) Search Component and Details Component
3) In the Search Component having buttons, Say : Button u201CXu201D on click of button I am navigating to Details component view through FPM.
4) When I am clicking above button u201CXu201D raising the event to call the parent business logic method, there I am getting Structure with values and binded this structure to the node and Mapped this node to the Details component interface node. FYI : I kept the debugging point Structure is having data , I had set static attributes table to node instance.
5) In the Details component node data is not coming mean empty.
Thanks in Advance.
Br-
CW
Edited by: CarlinWilliams on Jul 4, 2011 9:21 AMHi,
When you use input Ext. check that the parent component should not be used as used component in child component.
Only in the parent component the child components should be used as used components and the usage has to be created for the
Child Components and the binding of the Node should be done from comp. controller of parent component to child node
by which you will be able to see double arrow against the node.This should work
Thanks,
Shailaja Ainala.
Maybe you are looking for
-
Hello, here is my problem: reading your mozilla support, I learned how to make Firefox open links in Google results in the same tab, that's the way I like it, but I still like to have my YouTube windows pop-up in a new tab (I participate in one forum
-
Poor performance and out of date
I'm sorry to have to say this, having been a big fan of Robohelp in the past, but Robohelp 8 is like something out of the dark ages. I last used it 2003 and it doesn't seem to have been updated since then. These are the problems I've encountered so f
-
I Have CC and it's taking so long to install on my new Mac book pro. The CC panel also says its syncing files down at the bottom, it's so slow it looks like it will never finish. Should it be taking this long?
-
I don't know how to start my iMac up. I don't even know what a boot disk is! Several days ago I tried to run Boot Camp but couldn't continue because I didn't have a Windows program to install si I'm not sure what happened. Can somebody please help me
-
Why won't iTunes save changes to my music library?
It seems like every time I update my music library (i.e. add ratings and such), it resorts to the default the next day (i.e. ratings are lost and changes are restored). Can anyone explain why iTunes won't let me make changes in my music library?