Not able to execute startEclipse.bat file in Eclipse (Oracle utilities SDK)
In Eclipse installation, i am not able to run "startEclipse.bat" file in this path "C:\SPLSDK\SDK\shortcuts" which comes under Oracle Utilities Software Development Kit 4.0.0.
once i start installing startEclipse.bat, i get a error message "windows cannot find /eclipse.exe, make sure you typed correctly and try again"
and how do i find the eclipse.exe on the installables? also in error message it shows backslash "/"eclipse.exe while executing "startEclipse.bat" file.
jdk and hibernate paths are located in "c:\spl". Is that fine?
And When I click “eclipse” in this path “C:\SPLSDK\SDK4.0.0.4\eclipse\eclipse-jee-galileo-SR2-win32\eclipse”, I get error "java runtime or jdk should be available in order to run eclipse. and no JVM was found after searching for the folder "C:\SPLSDK\SDK\4.0.0.4\_jvm\bin\javaw.exe" ". I have installed Jdk in “C:\spl\jdk1.6.0_18”. And to install Eclipse, should I change the path of installing jdk to support Eclipse installation?
what could be the reason?
Please give me suggession that how to install eclipse?
Regards
Vijaya
Please help. Its urgent.
Similar Messages
-
Executing a .bat file from java code
Im writing a utility and i need to be able to create and execute a .bat file from my program. I can create the .bat file fine but when i try to execute it nothing happens. I tried to use the following line of code to try to execute the .bat file (called make.bat) :
try
String parameterString = "\"C:\\WINNT\\System32\\cmd.exe\" C:\\ITS_Test\\make.bat";
Runtime.getRuntime().exec(parameterString);
catch (Exception e)
System.out.println(e);
The Runtime.getRuntime()exec() method worked fine when trying to execute an excel file but for some reason it dosen't want to work for the DOS prompt. Any ideas?Thanks everyone for all the replies.
I have tried all the above with no luck. Im using netbeans, does anyone think that it could be a problem with the IDE.
I tired the following code :
String parameterString = "cmd.exe /C \"C:\\ITS_Test\\make.bat\"";
Process pr = Runtime.getRuntime().exec(parameterString);
pr.waitFor();
This code does not throw any exceptions but just hangs. I also tried:
String [] parameterString = {"cmd", "/c", "C:\\ITS_Test\\make.bat"};
Process pr = Runtime.getRuntime().exec(parameterString);
pr.waitFor();
and:
String parameterString = "\"C:\\WINNT\\System32\\cmd.exe\" \"C:\\ITS_Test\\make.bat\"";
Process pr = Runtime.getRuntime().exec(parameterString);
pr.waitFor();
with the same result. Does anyone know why it just hangs and nothing happens (no exceptions thrown)? -
Error - executing oraclexmlsqlload.bat file
Hi,
I have downloaded XML SQL Utility.
I have set the path(JDK path and oracle xml sql utility path) in env.bat file. Now when I try to execute oraclexmlsqlload.bat file, it is getting executed to a point where it says "creating function" and then I get this error...
ORA-12203: TNS:unable to connect to destination.
can any one advice me on this error pls.
I have JDK setup right and JDBC is able to connect to the database.
Thanks in advance.
vik
nullIf you are using the application model, you can add return code 1 as a success in the
Return Codes tab of the deployement type. If not you can catch the exit code 1 in your batch file and return a 0 instead.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
How can I execute a .bat file from inside a java application
I have a .bat file which contains an executable file(.exe) and some input and output file names. What commands can I use to execute this bat file from my java application.
After raeding tkleisas' reply; i am trying to invoke another application (which can be invoked from the command line) by using a batch file and trying Runtime.exec for executing a batch file.
My current code is:
Runtime runtime = Runtime.getRuntime();
Process trialProcess;
trialProcess = runtime.exec("cmd.exe /C start C:\\guns.bat /B");
And my guns.bat looks like:
cd C:\CALPUFF
echo trial
start calpuff.exe CALPUFF.INP
This is not working for me and i get the following in the error stream of the trialProcess:
Error :
The system cannot execute the specified program.
Process finished with exit code 1
Has anyone come across something like this and know what's wrong with this one??
thnx -
Not able to execute scenario in RA 14.0
Problem Summary
Not able to execute scenario in RA 14.0
Problem Description
[oracle@dev-rtlrmadb src]$ ./SIL_RetailLoadControlSeedData.ksh
OracleDI: Starting scenario SIL_RETAILLOADCONTROLSEEDDATA 001 in context DEVELOPMENT_INSTALL ...
2015-02-08 12:01:01.026 ERROR ODI-1217 Session SIL_RETAILLOADCONTROLSEEDDATA (20404) fails with return code 7000.
2015-02-08 12:01:01.099 ERROR ODI-1134 Agent Internal encountered an error: ODI-1217: Session SIL_RETAILLOADCONTROLSEEDDATA (20404) fails with eturn code 7000. Caused by: ODI-1226: Step RA_Log_Error_File fails after 1 attempt(s).
When checking in $MMHOME/error directory , the log is showing following error :-
Package Name-> SIL_RETAILLOADCONTROLSEEDDATA
Step Name-> SIL_RetailInitial_C_ODI_PARAM_Load
Error Details->
ODI-1226: Step SIL_RetailInitial_C_ODI_PARAM_Load fails after 1 attempt(s).
ODI-1240: Flow SIL_RetailInitial_C_ODI_PARAM_Load fails while performing a Loading operation. This flow loads target table C_ODI_PARAM.
ODI-1228: Task SS_0 (Loading) fails on the target ORACLE connection ORACLE_BI_APPLICATIONS_RA_INSTALL.
Caused By: java.sql.SQLSyntaxErrorException: ORA-01918: user 'radm01' does not exist
DB user exists. I'm able to login via sqlplus. Have checked in Physical schema and Logical schema also. All required Data Servers exeists in Topology -> physical / locical schema-> oracle. and tested the connection every thing is working properly.
Error Codes
ODI-1226 , ODI-1240 , ODI-1228 , ODI-1217 , ODI-1134 , ODI-1232
Problem Category/Subcategory
Retail Merchandising Analytics Issues
Uploaded Files
Template Question Responses
1) ### Steps to Reproduce ###
Go to $MMHOME/src .
Execute the ./SIL_RetailLoadControlSeedData.ksh from prompt. This gives the mentioned error.
I'm currently configuring Oracle Merchandising Analytics 14.0 . Referring guide " Oracle® Retail Analytics Installation Guide Release 14.0 E50594-05 ".
I'm at step number 11 ,
page no 58.Please help. Its urgent.
-
Not able to read the wsdl file from server Premature EOF encounter
Hi All,
I am facing issue while accessing a web Service from server. Here is the clear view about it.
I created a simple SyncBpel process in a composite and deployed in to the server and it is working fine. Later i created a new Asyn bpel process in a composite and in the external reference i dragged a web Service and imported the wsdl url from server of the SyncBpel and wired the Asynbpel process to webserive .
Now here i am facing peculiar behavior which i am not able to trace it out.
1) For the first time when i import the url of syncBpel from the server i am not facing any error and it is working fine as expected but when i close the Jdeveloper and open it i am not able to user the web Service and it is saying as "Not able to read the wsdl file from server Premature EOF encounter"
2)When i close and open the Jdeveloper i can see the url of the wsdl which imported in webserver is changing from http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL to http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/BPELsync.wsdl
3)when I open and see the url http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL I can see the soap address as *<soap:address location="http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel!1.0*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c/bpelsync_client_ep"/>*
I don’t understand why the soap end contains “*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c” and this kind of url for soap address is coming to all the bpel process which I am deploying in the server.
I checked the in Jdeveloper where webproxy is uncheck and the server is also up but still I am facing issue of reading the error.
Can someone please help in resolving the issue.
I am using SOA 11g 11.1.1.5 and Jdeveloper 11.1.1.5
Many thanks.
Tarak
Edited by: user11896572 on Jan 17, 2012 5:22 PMHi,
Setting default from the jdeveloper -
During composite deployment from Jdeveloper (wizard driven), you will be given an option to choose the version of the composite and there will also be an option for you to choose if the composite needs to be deployed as default.
Setting default from the em console -
After deploying a composite, login to the em console and click on the composite that you want to set as default, and you will find a tab - "Set as Default". please note that this tab will not be seen, if the composite is already set as default.
Refer -
http://docs.oracle.com/cd/E12839_01/integration.1111/e10226/soacompapp_mang.htm
8.2 Managing the State of Deployed SOA Composite Applications
Thanks -
Not able to add new log file to the 11g database.
Hi DBA's
I am not able to add the log file i am getting error while adding the database.
SQL> alter database add logfile group 3 ('/oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') size 50m reuse;
alter database add logfile group 3 ('/oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') size 50m reuse
ERROR at line 1:
ORA-01505: error in adding log files
ORA-01577: cannot add log file '/oracle/DEV/db/apps_st/data/log03a.dbf' - file
already part of database
SQL> select a.group#, member, a.status from v$log a, v$logfile b where a.group# = b.group# order by 1;
GROUP# MEMBER STATUS
1 /oracle/DEV/db/apps_st/data/log01a.dbf ACTIVE
1 /oracle/DEV/db/apps_st/data/log01b.dbf ACTIVE
2 /oracle/DEV/db/apps_st/data/log02a.dbf CURRENT
2 /oracle/DEV/db/apps_st/data/log02b.dbf CURRENT
Kindly help me to add the new log file to my database.
Thanks,
SGHi Sawwan,
V$LOGMEMBER was written in the document,
I query the log members as bellow
1)select a.group#, member, a.status from v$log a, v$logfile b where a.group# = b.group# order by 1;
GROUP# MEMBER STATUS
1 /oracle/DEV/db/apps_st/data/log01a.dbf INACTIVE
1 /oracle/DEV/db/apps_st/data/log01b.dbf INACTIVE
2 /oracle/DEV/db/apps_st/data/log02a.dbf CURRENT
2 /oracle/DEV/db/apps_st/data/log02b.dbf CURRENT
2)SQL> select group#,member,status from v$logfile;
GROUP# MEMBER STATUS
2 /oracle/DEV/db/apps_st/data/log02a.dbf
2 /oracle/DEV/db/apps_st/data/log02b.dbf
1 /oracle/DEV/db/apps_st/data/log01a.dbf
1 /oracle/DEV/db/apps_st/data/log01b.dbf
But i am littile bit confused that there is no group or datafile called " Group 3 and log03a.dbf" as per the above query, how can i drop tease group and datafile.
and i crossverified in the data top the files are exist or not but those are not existing. but still i am getting the same error that i can't create that already exist.
can issue the bellow queris to drop those group which i dont think so it will exist?
SQL>alter database drop logfile group 3;
Thanks in advance.
Regards,
SG -
We are not able to execute below procedure, plz help me ASAP.
Dear All
I am created one procedure with 4 parameter 1 is Ref Cusrsor rest of 3 are Varchar,But we are not able to execute below procedure, plz help me ASAP.
CREATE OR REPLACE PROCEDURE GETCHART(RPT_CURSOR OUT RPT_PACKAGE.RPT_RESULTS,
V_VITALCHARTING VARCHAR2,
V_DOCIDPATIENTS VARCHAR2,
v_fromdate varchar2,
v_todate varchar2) AS
D1 VARCHAR2(500);
D2 VARCHAR2(500);
G1 VARCHAR2(500);
R1 VARCHAR2(500);
R2 VARCHAR2(500);
R3 VARCHAR2(500);
R4 VARCHAR2(500);
R5 VARCHAR2(500);
H1 VARCHAR2(500);
H2 VARCHAR2(500);
V_COUNT NUMBER;
RC VARCHAR2(100);
RMI VARCHAR2(100);
RMAX VARCHAR2(100);
R12 VARCHAR2(500);
REQ NUMBER;
V_MAX number;
v_idcount number;
RSEQ NUMBER;
RCH VARCHAR2(500);
BEGIN
INSERT INTO TEMPDATA
SELECT ROWNUM G, TIME1
FROM (SELECT distinct TO_CHAR(H.RECORDEDDNT, 'mm/dd/yy hh24:mi:ss') TIME1
FROM VIEW_PATIENTCHART V,
chartingtxheader H,
chartingtxdetails D
WHERE h.docid = d.docidchartingtxheader
and v.VITALCHARTING_PK = h.docidvitalcharting
and v.VITALPARAMETER_PK = d.docidvitalparameter
and v.VITALCHARTING_PK = V_VITALCHARTING --General Vital Signs
and H.DOCIDPATIENTS = V_DOCIDPATIENTS
and TO_DATE(to_char(h.recordeddnt, 'DD/MM/YYYY'),
'DD/MM/YYYY') BETWEEN
TO_DATE(v_fromdate, 'DD/MM/YYYY') AND
TO_DATE(V_TODATE, 'DD/MM/YYYY'));
SELECT MAX(ID) INTO V_MAX FROM TEMPDATA;
V_IDCOUNT := 0;
WHILE V_IDCOUNT < V_MAX loop
FOR J IN (SELECT id, ROWNUM G, vdate time1
FROM (SELECT id, ROWNUM, VDATE
FROM TEMPDATA
WHERE ID BETWEEN V_IDCOUNT + 1 AND V_IDCOUNT + 8)) LOOP
D1 := D1 || 'COL' || J.G || ',';
D2 := D2 || '''' || J.TIME1 || '''' || ',';
END LOOP;
D1 := SUBSTR(D1, 1, LENGTH(D1) - 1);
D2 := SUBSTR(D2, 1, LENGTH(D2) - 1);
DBMS_OUTPUT.PUT_LINE(d1);
SELECT SEQ_GETCHART.NEXTVAL INTO RSEQ FROM DUAL;
G1 := 'INSERT INTO GETDATA2 (IDSLNO,idcount,' || D1 || ') VALUES(' || RSEQ || ',' ||
V_IDCOUNT || ',' || D2 || ')';
--EXECUTE IMMEDIATE G1;
DBMS_OUTPUT.PUT_LINE(d1);
DBMS_OUTPUT.PUT_LINE(SUBSTR(D2, 1, LENGTH(D2) - 1));
DBMS_OUTPUT.PUT_LINE(G1);
EXECUTE IMMEDIATE G1;
FOR K IN (SELECT id, ROWNUM G, vdate time2
FROM (SELECT id, ROWNUM, VDATE
FROM TEMPDATA
WHERE ID BETWEEN V_IDCOUNT + 1 AND V_IDCOUNT + 8)) LOOP
FOR I IN (select s.*, rownum hslno
from (SELECT v.CHARTNAME,
v.PARAMETERNAME_CS,
' ' || v.PARAMETERNAME PARAMETERNAME,
TO_CHAR(H.recordeddnt, 'mm/dd/yy hh24:mi:ss') TIME1,
CASE
WHEN IDSLNO_GN5029 IN (1040, 1041) THEN
CASE
WHEN TO_NUMBER(d.recordedvalue) <
TO_NUMBER(D.MINVALUE) THEN
decode(d.recordedvalue,
null,
d.recordedvalue,
d.recordedvalue || ' ' || 'L')
ELSE
CASE
WHEN TO_NUMBER(d.recordedvalue) >
TO_NUMBER(D.MaxVALUE) THEN
decode(d.recordedvalue,
null,
d.recordedvalue,
d.recordedvalue || ' ' || 'H')
ELSE
decode(d.recordedvalue,
null,
d.recordedvalue,
d.recordedvalue || ' ' || 'N')
END END ELSE d.recordedvalue END IMAGECHAR,
d.minvalue,
d.maxvalue,
D.UOMCODE
FROM VIEW_PATIENTCHART V,
chartingtxheader H,
chartingtxdetails D
WHERE h.docid = d.docidchartingtxheader
and v.VITALCHARTING_PK = h.docidvitalcharting
and v.VITALPARAMETER_PK = d.docidvitalparameter
and v.VITALCHARTING_PK = V_VITALCHARTING --General Vital Signs
and H.DOCIDPATIENTS = V_DOCIDPATIENTS
ORDER BY V.DISPLAYORDER_CS, V.DISPLAYORDER
-- v.PARAMETERNAME_CS,v.PARAMETERNAME
) s
where s.time1 = k.time2) LOOP
select count(1)
into v_count
from GETDATA2 d
where d.PARAMETERNAME_CS = i.PARAMETERNAME_CS
and PARAMETERNAME = i.PARAMETERNAME
and idcount = v_idcount;
IF V_COUNT = 0 THEN
RCH := I.CHARTNAME;
R1 := 'COL' || K.G;
R2 := '''' || I.PARAMETERNAME_CS || '''' || ',';
R3 := '''' || I.PARAMETERNAME || '''' || ',';
R4 := '''' || I.IMAGECHAR || '''';
RC := '''' || I.CHARTNAME || '''' || ',';
RMI := '''' || I.minvalue || '''' || ',';
RMAX := '''' || I.maxvalue || '''' || ',';
R12 := '''' || I.UOMCODE || '''' || ',';
SELECT SEQ_GETCHART.NEXTVAL INTO RSEQ FROM DUAL;
H1 := 'INSERT INTO GETDATA2 (IDSLNO,UMCODE,idcount,CHARTNAME,minvalue,maxvalue,PARAMETERNAME_CS,PARAMETERNAME,' || R1 || ')' ||
' values(' || RSEQ || ',' || R12 || v_idcount || ',' || RC || RMI || RMAX || R2 || R3 || R4 || ')';
EXECUTE IMMEDIATE H1;
ELSE
R5 := 'COL' || K.G;
R4 := '''' || I.IMAGECHAR || '''';
H2 := 'UPDATE GETDATA2 SET ' || R5 || '=' || R4 ||
'WHERE PARAMETERNAME_CS=' || '''' || I.PARAMETERNAME_CS || '''' ||
' AND ' || 'PARAMETERNAME=' || '''' || I.PARAMETERNAME || '''';
EXECUTE IMMEDIATE H2;
END IF;
END LOOP;
end loop;
UPDATE getdata2 s
set s.parametername = s.parametername || ' -' || ' (' || minvalue ||
' -- ' || maxvalue || ') ' || UMCODE
where s.parametername is not null
and idcount = v_idcount
and minvalue != 0
and maxvalue != 0;
UPDATE getdata2 s
set s.parametername = s.parametername || ' -' || UMCODE
where s.parametername is not null
and idcount = v_idcount
and minvalue = 0
and maxvalue = 0;
UPDATE GETDATA2 S
SET S.PARAMETERNAME_CS = NULL
WHERE ROWID NOT IN (SELECT MIN(ROWID)
FROM GETDATA2
WHERE idcount = v_idcount
GROUP BY PARAMETERNAME_CS)
and idcount = v_idcount;
UPDATE GETDATA2 S
SET CHARTNAME = NULL
WHERE ROWID NOT IN (SELECT MIN(ROWID)
FROM GETDATA2
WHERE idcount = v_idcount
GROUP BY CHARTNAME)
and idcount = v_idcount;
UPDATE getdata2 s
set s.parametername = ' PARAMETER'
where s.parametername is null
AND S.PARAMETERNAME_CS IS NULL;
v_idcount := v_idcount + 8;
D1 := null;
d2 := null;
end loop;
for i in (SELECT G.PARAMETERNAME_CS, G.IDSLNO
FROM GETDATA2 G
WHERE G.PARAMETERNAME_CS IS NOT NULL) LOOP
INSERT INTO GETDATA2
(IDSLNO, PARAMETERNAME)
VALUES
(I.IDSLNO - 1 + 0.5, I.PARAMETERNAME_CS);
END LOOP;
update GETDATA2 h set h.PARAMETERNAME_CS = null;
update GETDATA2 h set h.chartname = rcH;
INSERT INTO GETDATA1
SELECT CHARTNAME,
PARAMETERNAME_CS,
PARAMETERNAME,
COL1,
COL2,
COL3,
COL4,
COL5,
COL6,
COL7,
COL8,
COL9,
COL10,
MINVALUE,
MAXVALUE,
UMCODE
FROM GETDATA2
ORDER BY IDSLNO;
OPEN RPT_CURSOR FOR
SELECT * FROM GETDATA1;
END;
CREATE OR REPLACE PACKAGE "RPT_PACKAGE"
as
type RPT_RESULTS is REF CURSOR;
type RPT_VARRAY is VARRAY(2000) of VARCHAR2(2000);
END RPT_PACKAGE;
Execute
declare
type my_newcursor IS REF CURSOR;
begin
GETCHART(my_newcursor,'General Vital Sign','1145561',sysdate-1,sysdate);
end;Parwez wrote:
Dear All
I am created one procedure with 4 parameter 1 is Ref Cusrsor rest of 3 are Varchar,But we are not able to execute below procedure, plz help me ASAP.
see a picture of my car.
my car won't go.
tell me how to make my car go.
How do I ask a question on the forums?
SQL and PL/SQL FAQ -
I'm not able to copy and paste files from my mac to hard disk and usb. I have tried dragging the items I want to copy to those devices but it won't work. I also have tried copying and pasting those files onto those devices too but that doesn't work too. Can any one help?
Hi BobRz
Thanks for you suggestion but it didn't work - are there other ways for solving this problem? Or is it because my files that I want to copy and paste onto my hard disk etc are too big? (However there is space on my hard disk and it works on a PC) -
Finder not able to view folders and files on EHD after updating to OS X 10.9.4
I can see still see 'Hitachi' in the 'Devices' Sidebar, but I am not able to view folders and files on this Hitachi XL2000 2TB FAT32 Hard Drive (EHD) that is USB connected to the iMac below.
Late 2013 Apple iMac (27-inch Display 2560 x 1440), 3.4GHz Quad-core Intel Core i5, Turbo Boost up to 3.8GHz, 8GB 1600MHz DDR3 SDRAM - 2X4GB, 512GB Flash Storage, NVIDIA GeForce GTX 775M 2GB GDDR5, Magic Trackpad, Apple Wireless Keyboard and OS X 10.9.4 Mavericks
All was fine until I updated from OS X 10.9.3 to 10.9.4 earlier this week, so now when I double-click on 'Hitachi' it just loads and loads with nothing happening and never displays the folder and file contents of the EHD.
Also, confirmed that Hitachi EHD has been removed from Spotlight indexing per System Preferences > Privacy > + > Hitachi and it was so this does not seem to be an indexing issue.
I have used OnyX and Apple Disk Utilities unsuccessfully to try and fix this problem.
Interestingly, Backblaze online backup still sees the EHD and connecting this EHD to a Win 8.1 PC also sees the EHD.
Further, I ran the commands below in 'Terminal' to make sure the drive was visible and got the following results which shows that the EHD is not hidden.
iMac:Applications john$ chflags nohidden /Volumes/Hitachi/
iMac:Applications john$ GetFileInfo /Volumes/Hitachi/
directory: "/Volumes/HITACHI"
attributes: avbstclinmedz
modified: 07/10/2014 23:26:44
Finally, I installed XtraFinder and am still not able to see the contents of the EHD, but when I installed OmniDiskSweeper I can navigate the EHD folder tree with no problems and can see the contents of the EHD, but when I try and open up a file it opens Finder which loads and loads and nothing happens.Apple Support was quite helpful, but in the end I will wait to do a clean install of OS X Yosemite which is due in the Fall and not try and fix OS X 10.9.4 Mavericks.
It turns out that I run backups on my '/Users/john/Library' and the size of this folder before the 10.9.4 update was 1.07 GB and after the update it is 806.9 MB which is baffling, but in the end all of these problems should be resolved with a clean install of OS X Yosemite.
One lesson learned for the future is that I will wait on installing an update until it has been in the wild for awhile as a quick OS X Mavericks Finder Problem search and similar searches show there could be an issue. -
I just downloaded the free trial of Adobe PDF to Word converter and was not able to convert a PDF file to word. Could anyone please help? Thx
Part of the problem in helping is likely that there is no program Adobe -- that is the company name. You are in the Acrobat forum, but it sounds like you have subscribed to Export PDF or such, a different program. The subscription to Acrobat is currently $19.99 per month.
-
Ipod as hard disk - Why am I not able to see the whole file?
I'm using my 80 gig 5th gen ipod as a hard disk for the first time. I've dragged a 32 KB text file to the ipod. When I scroll though the file all is great...but I'm not able to see the whole file? It's like I get one page and that's all. Any ideas to help me?
Do you mean the Notes function? If so, the file size per note is, I believe, 4k. Therefore, you'd need to break up a 32k file into several parts or it will be truncated.
-
Not able to find mod_oc4j.conf file for setting Load Balancing on ESB
Hi Guys,
I am trying to set load balancing on ESB ,I got one document from oracle site for setting the load balancing on ESB. According to that document we have to change mod_oc4j.conf file for setting the roundrobin:weighted,metric,random algorithms.
But I am not able to find mod_oc4j.conf file in my ORACLE_HOME directory.
Actual path is
ORACLE_HOME/Apache/Apache/conf/mod_oc4j.conf file
I have All folders up to conf but in conf folder there is no mod_oc4j.conf file.
I just want to know is there any installation problem or we have to create
mod_oc4j.conf file in that conf folder for seting the loadbalancing on ESB
kindly give me the exact solution on this .
Thanks in advanceHi Chintan,
I have apache folder ,but there i have cong folder but in that I am not able to find mod_oc4j ,I know ESB it maintain load in transparent way but in my project we have heavy load on ESB we have to maintain this load in a proper way
Please give me the exact solution to set load balancing On ESB.
Thank you
Bollineni -
Not able to find userChrome.css file for customizing the Firefox browser. I just installed 20.0.1 Firefox browser version.
I want to disable/remove navigation bar from the browser window, making the browser to work like kiosk mode.
Please Help,
Thanks,
Vishal.hello,
here is the complete path ..
''C:\Documents and Settings\XXXXXXX\Application Data\Mozilla\Firefox\Profiles\chrome"
Let me know
Thanks,
Vishal. -
Reg: not able to edit the property file.
Hi,
I have imported the track and in one of the DC i am not able to edit the properties file. What could be the reason.
Thanks in advance.Hi
Since you are in Track.
Which propertyu file ???
Best Regards
Satish Kumar
Maybe you are looking for
-
"An iPod has been detected, but it could not be identified properly" error
We have had five iPod Nano's installed via our home computer (Dell PC - Windows Vista): one 2nd generation (currently being used) one 3rd generation (not in use - was lost) one 4th generation (not in use - was stolen) two 5th generations (currently b
-
Hey. I've played Diablo II for a while on my iBook G4, I got an Intel iMac and installed it on there. I put my save file on the iMac but no cinematics came with it. I put the movies folder from the iBook on the iMac and still nothing. Is there a way
-
Thunar does not recognize image file formats
Hi Archers, My problem is that I use XFCE4 with Thunar file manager and Thunar does not recognize image file formats. I mean for example JPG format is an executable application fromat according to my Thunar, but I'd like Thunar to recognize JPG forma
-
Db link - invalid username/password error
hi i created a connected user public db link, when i try to use it i get error message invalid username/password here is my set up: tnsnames.ora --remote db DWHTEST= (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = dwhtest.be)(PORT = 1521)) (CONNECT
-
How to fetch agent in eim 4.0 from cisco icm 7.0
Hi, I am using eim 4.0 with ipcce 7.0. we have added some new agent in aw but that agets are not reflecting in eim user list. i have restarted the mr pg and other services but the issue is same. please let me know how to get new user created in aw in