Not able to find Parameters in NWA PI 7.1
Hello All,
I'm running Solution Manager diagnostic Managed system wizard on PI 7.1 system and after running Managed setup for PI system, i'm getting 2 warnings related with steps---
1. "SSO Setup for XI apps failed : a problem occured while changing the authentication templates"
Logs of same are---
The SSO ticket Certificate <OU=J2EE,CN=QSM> has been successfully imported into ticket Keystore
The Login Modules for validating SSO tickets were already installed
The ticket ACL already contained : sys=QSM,000 iss=OU=J2EE,CN=QSM dn=OU=J2EE,CN=QSM
The Authentication template for component sap.com/opensqlmonitors*OpenSQLMonitors was already set to ticket
The Authentication template for component sap.com/tcmonitoringsysteminfo*monitoring was already set to ticket
The Authentication template for component sap.com/tcmonitoringsysteminfo*sap_monitoring was already set to ticket
The Authentication template for component sap.com/com.sap.xi.repository*rep was already set to ticket
The Authentication template for component sap.com/com.sap.xi.directory*dir was already set to ticket
SSO Setup for XI apps failed : a problem occured while changing the authentication templates
SSO setup failed : error while updating login modules : No such policy configuration: sap.com/com.sap.rprof.remoteProfile*exchangeProfile
The SSO ticket Certificate <CN=QSM> has been successfully imported into ticket Keystore
The Login Modules for validating SSO tickets were already installed
The ticket ACL already contained : sys=QSM,100 iss=CN=QSM dn=CN=QSM
The Authentication template for component sap.com/opensqlmonitors*OpenSQLMonitors was already set to ticket
The Authentication template for component sap.com/tcmonitoringsysteminfo*monitoring was already set to ticket
The Authentication template for component sap.com/tcmonitoringsysteminfo*sap_monitoring was already set to ticket
The Authentication template for component sap.com/com.sap.xi.repository*rep was already set to ticket
The Authentication template for component sap.com/com.sap.xi.directory*dir was already set to ticket
SSO Setup for XI apps failed : a problem occured while changing the authentication templates
SSO setup failed : error while updating login modules : No such policy configuration: sap.com/com.sap.rprof.remoteProfile*exchangeProfile
Exceptions
java.rmi.RemoteException: No such policy configuration: sap.com/com.sap.rprof.remoteProfile*exchangeProfile
at com.sap.engine.services.security.remoteimpl.RemoteSecurityImpl.getPolicyConfiguration(RemoteSecurityImpl.java:69)
at com.sap.engine.services.security.remoteimpl.RemoteSecurityImplp4_Skel.dispatch(RemoteSecurityImplp4_Skel.java:266)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
2nd Step # At least one support role assignment did not succed, check details below and logs for more info
*********************************************************Logs*********************************
User SAPSUPPORT was found on this system.
No J2EE roles could be assigned to user SAPSUPPORT for access to SQL*Trace and SystemInfo applications
A problem occured while attempting to set J2EE roles for XI
Failed to assign J2EE Roles for XI : The role 'display' on component 'sap.com/com.sap.xi.repository*rep' could not be found on
this system
The following UME support roles were succesfully assigned to SAPSUPPORT : SAP_JAVA_NWADMIN_CENTRAL_READONLY
The following UME XI roles were succesfully assigned to SAPSUPPORT : SAP_SLD_GUEST
Exceptions
java.lang.IllegalArgumentException: The role 'display' on component 'sap.com/com.sap.xi.repository*rep' could not be found on this
system
at com.sap.smd.agent.plugins.remotesetup.SecurityContextAdapter.assignRoleToUser(SecurityContextAdapter.java:318)
at com.sap.smd.agent.plugins.remotesetup.SetupManager.setXiRoles(SetupManager.java:198)
at com.sap.smd.agent.plugins.remotesetup.RemoteSetupStep.setupRoles(RemoteSetupStep.java:387)
at com.sap.smd.agent.plugins.remotesetup.RemoteSetupStep.execute(RemoteSetupStep.java:116)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:536)
at com.sap.smd.agent.plugins.remotesetup.RemoteSetupService._setup(RemoteSetupService.java:159)
at com.sap.smd.agent.plugins.remotesetup.RemoteSetupService.setup(RemoteSetupService.java:86)
at com.sap.smd.agent.plugins.remotesetup.RemoteSetupServicep4_Skel.dispatch(RemoteSetupServicep4_Skel.java:112)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:319)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:200)
at com.sap.engine.services.rmi_p4.DispatchImpl.run(DispatchImpl.java:716)
at java.lang.Thread.run(Thread.java:534)
Basically what i think is, here we need to add assign roles as mentioned in note #1042450, but problem is i'm not getting this parameters, in NWA for PI7.1. (IN PI 7.1, we dont have Visual Admin, so need to add in NWA)
Please do check & let me know, if anyone knows, how to add this.
Thanks,
Anand.
Hi Mathan,
Thanks for the quick reply, but can you please elaborate on this, did you also faced with this issue?
Did you raised any message with SAP for this? What was SAP's reply on this?
Please update me ASAP on this
Thanks,
Anand.
Similar Messages
-
Not able to find JNDI Destination WLS
Hi all,
I am trying to send a message to a JMS Queue. Everything seems ok, the test in the physical architecture is successful, I create the logical architecture, the model, and the data store with the columns.
I create the interface with IKM SQL to JMS Append, I execute it but I get an error, it is not able to find the destination.
Could someone tell me which could be the problem??
Thanks!!!Hi Avinash
Use the below path in NWA
NWA--->Troubleshooting--->JNDI Browser
then select context name and search by the JNDI name of the module.
JNDI name will be found in the ejb-j2ee-engine.xml -
Not able to find out the path where i need to place the .plx file on server
I have to make some changes in the PLL (library) file and compile it into it's .plx file and move the .plx to the server.
I am not able to find out the path where i need to place the .plx file on the server.
I have placed it in /iasapp01/app_name/library,but it is not taking it into effect.
Please help,if anyone knows about this,as to how to solve this issue
Thanks
GAGHi Andreas,
My Forms Version is 9.0.2 and the application server is 9iAS( 9.0.2)
The variable FORMS90_PATH in the .env file has the following entries
FORMS90_PATH=/iasapp01/app_name/fmx:/iasapp01/app_name/library:/iaspp01/app_name/html
and i have placed the plx in the /iasapp01/app_name/fmx path,but somehow its not referencing it.
My Formsweb.cfg has the following entry...
[app_name]
pagetitle=app_name_WEB
serverapp=/app_name/app_name
width=800
height=550
colorscheme=blue
separateframe=true
form=log.fmx
otherparams=REPORT_PATH=/iasapp01/app_name/html/report_files/ FILE_PATH=/iasapp01/app_name/rep/
WEB_PATH=http://server.com:7778/app_name/
envfile=/ias01/app/oracle/product/ias_9.0.2/forms90/server/app_name.env
I have another question which is ..Does applciation built on Forms 9.0.2 would work on Internet Explorer 8 and Windows 8 environment using Sun JRE.
I was going through this website
http://nutthaphon.blogspot.com/2009/05/how-do-jinitiator-and-jpi-parameters.html
and followed the steps as mentioned,but it did not work for me.
Can you help me if you have any info on this?
Thanks
GAG -
Not able to find eservices application installed...
Hello Guys,
This is satish, I am not able to find siebel eservice application installed in my machine after installing Siebel 8.1 SIA sample. Can some body help me out with this problem, as i want a guidance what has to be done and how it should be done.
I only installed sample, i dint do server installation.
windows platform 2008 server
siebel SIA 8.1
Thanks in advance.
satishHi jiyog
Thanks for responding for my issue.
I tried that but from where should i call the application. I copied the CFG and the parameters which you gave me are already existing in that CFG.
Please assist me
Thanks
satish -
Hi All,
Good Evening!
I am loading data from ODS to Cube. I am not able to find values for 0ORDER_CURR in the cube and also in the report which I built on the Cube. But they are present in the ODS.
Please help me to find the problem. Thanks in Advance...
With regards
MahiHi Mahi..
Try to check is there mapping in ur Update rules for this 0ORDER_CURR.. if not then maintain the same..
Also let us know whether u have used this object at the cube level or not??? if not then try to maintain and then maintain the mapping as well from the DSO.....
this will solve the issue....
thanks..
Assign points if this helps... -
Not able to find driver page for HP 15-r007tx
Not able to find driver page for HP 15-r007tx.
The web site is able to detect my product, but when clicked on link Software & Driver Downloads, it says page not found.
Please help. I am looking drivers for windows 7 ultimate.Hi Anoop22Sharma
Install:
Intel Chipset Installation
Intel Video Driver
NVIDIA High-Definition (HD) Graphics Driver
Synaptics Mouse Driver
Realtek Ethernet Controller Drivers
MediaTek(Ralink)802.11 b/g/n Wireless LAN (WLAN) Adapter
Ralink Bluetooth Software Driver
Intel USB 3.0 Driver for Intel 8 and U/Y Series
Realtek High-Definition (HD) Audio Driver
Realtek PCIe Media Card Reader Driver
HP 3D DriveGuard -
Not able to find values in LOV of field "Help Desk" of Global contract
Not able to find values in LOV of field "Help Desk" of Global contract defaults.
This value should be coming from resource setup.
Resource is already created.Issue resolved:
The resource should ahve valid Email id in HR People setup -
I am not able to find Template Builder in MS Word 2003
Hi All,
we have installed MS Word 2003 Ver in our work station for BI Publihser Reports, but i am not able to find the template builder in the Menu bar.
i was try to add in tool -> Template and add-Ins also, but still i dint get the template builder in top menu's.
Any one can help me on this.
Thanks in advance.
Regards,
LoganthanHi,
Did you installed BI Publisher first? usually we installed MS Word first then BI Publisher then it appears in the top bar.
HTH,
Vikas -
Question
If I do not select F11 ( full screen ) a big part of the screen "falls" of the right hand side of my monitor and is not readable, I am not able to find the neccesary adjustments.
Screen 2/3 blanco on the left side
With F11 all OK.Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Not able to find Source System in BI 7......
Hi All,
I am working on BI 7
I am exctracting the data from Flat File Source System like SMID(Characterstic) and PQTY,SALE,PROFIT as a KeyFigures
I have taken SMID as Characterstic and PQTY,SALE,PROFIT as a KeyFigures..
I hav created InfoObject Catalog for Characterstic and Keyfigures...
I Created a Application Componenet and Assigned Objects to InfoSource also...
But i struckked while assigning the Source System to the InfoSource...
I am not able to find how to assign the Source System like we do in 3.0b,3.1c & 3.5..
Can anybody tell me the Step by Step Navigation procedure for to assign Source System to the InfoSource and Other Things also....
Regards,
Kiran TelkarHi,
These are the settings needed for the broadcaster:
http://help.sap.com/saphelp_nw70/helpdata/en/55/1b9940ccd42a54e10000000a1550b0/frameset.htm
Eddy
PS. Reward useful answers and earn points yourself -
i am not able to find a playlist on my phone. i had it on the phone for months and now it is not there. i have tried to sny repeatedly and it does not show up. Help, how do I recover or get my favorite playlist back onto my phone
Hello,
While your BB may not, while in your possession, have been part of a BES environment, it nevertheless likely has an IT policy in place as this is one of the key symptoms of that fact. If it ever was part of BES, then there are specific steps that must be taken to remove the IT Policy...just removing it from BES does not remove the policy. The process to remove it is totally destructive, so be sure you back up first. Also, when you restore, DO NOT do a full restore...rather, do a selective restore of only those things you need...if you do a full restore, you will simply put that IT Policy back onto your BB and be right back where you started.
OK, so here is the procedure:
KB14202How to remove an IT policy from a BlackBerry smartphone
I always recommend Method 3 for PC and Method 4 for MAC.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Is it possible for deleting all the apps from the appstore which are showing up in the apps not on my phone section. Before I was able to delete them from itunes but now I am not able to find that option.
You can hide them via your computer's iTunes : iTunes Store: Hiding and unhiding purchases - Apple Support
The 'x' might not show on their top left corner (it might be invisible), but clicking where it should be should hide the app. -
Not able to find 'Sales Summary' of a BP in CIC0 transaction
Hi,
We are using CRM 3.0 vesion and not able to find 'Sales Summary' of a BP in CIC0 transaction.
Appriciate any suggests on this.
Regards,
Fedor.Hi ,
is it open so item or you already done the DO and Billing? , it wont allow to change if you have any sub.documents for that SO.
regards
Prabhu -
Purchasing orgn not able to find in the dropdown list.
Hi
Can anyone guide me I am not able find the new Purchasing groups in dropdown list of my basic date in while creation of shopping cart.
I aslo created new company code and new Purchaisng Org , I am able to get the new company code and new plant in the drop down list but not able to find the Pur groups.
Can any one help me on this, Because I have assigned the Org unit of Company code and Pur org also in the responsibility tab of this Pur grp.
but still the problem persists.
please suggest.
Regards
srujan.kHi,
Please check the user attributes in PPOSA_BBP.here you can see the user id is tagged to one purchase group.
You can assign the user to one Purchase group,that's a reason you are not able to see the drop down list for purchase group while creating SC.
If you want another purchase group, please change the user attributes.
I hope it will help.
Regards,
Manish -
Not able to find AIA2.5 installable for Windows 64 bit
Hi Friends,
I am not able to find the installable of AIA 2.5 for windows platform (64 bit) at oracle e-delivery.
I have installed SOA 10..1.3.5.0 with OC4J, now I need to install AIA 2.5 and then Customer MDM (UCM) PIP over it as a project requirement.
Kindly guide me from where I may download AIA 2.5 and Customer MDM PIP installable.
Thanks
Shalindra SinghThanks hsawwan,
It will not give problem ?
Oracle should put some notes on it.
Reg
Chirag PatelFor 11i on Solaris, the applications patches are always 32-bit. Only select 64-bit Solaris for database patches if you converted your database to 64-bit.
Maybe you are looking for
-
How do you remove a virus from your macbook?
Hello I think I may have a virus on my computer. When I'm online random words on the page are hyperlinked to a website claiming I won an iPad 2. The website is "BESTPROMOTIONSDAILY.COM". There is another site but I forgot the name. I have not clicked
-
How to check the visibility of a Web Dynpro input field
Hi, In my application, one input field could be set as invisible by 1, Component Configuration: The 3rd tab "Web Dynpro Built-in" -> Views and There Elements -> Visibility (Check the radio: No) 2, Administrator configuration: While the Web Dynpro is
-
Hi, I've been upgrading a B&W G3 from 10.3.9 to 10.4.x and after installing from a 10.4 retail disc I used the software updater to download and install 10.4.11. This worked fine, no errors. But, both Software Update and Safari will not load at all,
-
Issues with Bex query structures and Crystal Reports/Webi
Hi experts, I'm having an issue with Bex Query structures and nulls. I've built a Crystal Report against a Bex query that uses a Bex Query structure. The structure looks like the following Budget $ Budget % Actual $ Actual % Budget YTD etc if I drag
-
hello everyone, im having a problem woth my ALV, how can i merge rows in ALV, example i want to merge row 3 and row 4? Another 1 how can I format a certain row in ALV? example row 5, I want the displayed value be centered, or right aligned, or left a