Not able to fine Create Item column in the Page personalization

Dear All,
I am not able to find the "Create Item" column in OA page personalization. Do we need to set any profile options for this?
Regards,
Joshna.

Hope you have set these profile option.
Personalize Self-Service Defn should also to Yes
Disable Self-service Personal to No
FND%Diagon% to yes
Once you are going for personlization, you would be getting personlize Page link.
Click personlize page link
Select Scope
select complete Radio Button
select Create Item Icon for a region(table)
Thanks

Similar Messages

Not able to display line item 20 in contract

I could not able to display line item 20 in the contract document.
line item 10 and 30is there however there is no line item 30. What could be reason and how to enable the same.
MRS

It may also possible if user forgot to enter the line item 20 and jump to line item 30 after 10 as below.
Then system will show as like this

Create Item column is not appearing in the "Personalize Page"

Hi All,
I am working in R12 upgrade project.
I have to create item(Link) in a table region as per the requirement.
But that "Create Item" button rather the column is not appearing in that "Personalize Page" when I click on the Personalize Page link of the concerned page.
Can anyone please suggest Do I have to do any setup or any profile option needs to be enabled.
Thanks,
Raja Dutta

Hi,
Enable profile 'FND: Personalization Seeding Mode', clear the cache and check if this solves your problem.
--Sushant

Not able to add free item in PO

dear all
i am not able to add free items in already created import PO. when i add item and click on free item check box, system says "No delivery costs allowed without invoice receipt" and if i click on invoice receipt that item is no longer free item as the free item check box gets untick.
pl help me to solve this.
thanks & regards'
manoj gupta

Hi
If there is no delivery cost condition like Freight at item level exists then
Please check any delivery cost conditions given as Header condition.If it is given as Header condition and this cost will be distributed among the line items.When you adding the line item, the cost also distributed.For free items you can't assign any costs.
Regards
Ramakrishna

Not able to find final Item in configurator R 12

Hi Guru's
I have created Model class item as CAR, Option Class items as : Tyre and Brakes.
Then finished Items as Rubber Tyres, Mac Tyres and Normal Brakes, Disc Brakes respectively for Tyres, Brakes.
In the configurator screen not able to find Finished items (Rubber Tyres, Mac Tyres ,Normal Brakes, Disc Brakes)
I am going through om and then click on configure for assembling.
Please advice on this.
Regards
Sunny

Hi Sandeep,
Thanks for the information.
Yes, added the Disc Brake and Normal Brake to the Brakes-OC BOM.
In the Brakes-OC BOM, ensure that these items are listed as optional-
Yes, this is done checked optional under om tab.
Go to the master org ; open up the indented CAR BOM. Make sure the whole BOM shows up-Everything comes perfectly here.
However still have the same problem gives the below error message in configurator screen.(Note this is in Vision instance R12)
[Session Valid] The configuration currently is valid.
[Session Incomplete] Tyres is unsatisfied.
[Session Incomplete] Brakes is unsatisfied.
Regards
Sunny

Not able to drag WEB items into the Layout. What can be the issue?

Hi all
I am not able to drag WEB items into the Layout. Is it a Basis issue? Or some changes in the settings need gto be done.
Thanks

Solved my own problem. Didn't realize I had to export the preview file from iBooks author. Once I did that, I was able to select that file within the preview box.

Not able to delete line items using BAPI_OUTB_DELIVERY_CHANGE

Hi,
    Not able to delete line items of a delivery using BAPI 'BAPI_OUTB_DELIVERY_CHANGE', with thte below code and even return parameter has zero messages.
I have even checked existing below posting.
https://www.sdn.sap.com/irj/scn/logon?redirect=http%3a%2f%2fforums.sdn.sap.com%2fthread.jspa%3fthreadid%3d782509
Below is the code that i am using.........
*wa1-deliv_numb = wa_lips-vbeln.
wa1-deliv_item = wa_lips-posnr.
APPEND wa1 to item_data.
wa-deliv_numb = vbeln_so .
wa-deliv_item = l_item.
wa-del_item = 'X'.
APPEND wa TO item_control.
w_header_data-deliv_numb = vbeln_so .
w_header_control-deliv_numb = vbeln_so .
w_delivery = vbeln_so .
*w_header_control-dlv_del = 'X'. "Delete whole Delivery
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
EXPORTING
    header_data    = w_header_data
    header_control = w_header_control
    delivery       = w_delivery
TABLES
   item_data      = item_data
    item_control   = item_control
    return         = return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      wait = 'X'.
I have even tried uncommenting item_data parameter but not able to delete line item.....i am able to delete whole delivery but not line items .........can any one of u help me in resolving this issiue plz ???
Regards,
M, Manohar

Kindly use WS_DELIVERY_UPDATE to delete the items
Sample code:
L_VBKOK-VBELN_VL = vbeln_so.
clear l_vbpok.
         refresh l_vbpok.
         l_vbpok-vbeln_vl = vbeln_so
         l_vbpok-posnr_vl = wa_deliv_item.
         l_vbpok-lips_del = c_x.
         append l_vbpok.
         set update task local.
         call function 'WS_DELIVERY_UPDATE'
           exporting
             vbkok_wa = l_vbkok
             commit   = ' '
             delivery = lv_delivery
           tables
             vbpok_tab = l_vbpok
           exceptions
             others   = 0.
         commit work and wait.

TS1398 I have an ipad and just recently am not able to connect to home wireless wifi, the hourglass just spins when clicking the network to connect, other devices work fine

I have an ipad 2 and just recently am not able to connect to home wireless wifi, the hour glass just spins when clicking the network to connect, other devices work fine and can connect. Was able to connect at school, but not here at home all of a sudden, help?

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Not able to see Metadata fields when adding the fields to the rule in UCM

Not able to see Metadata fields when adding the fields to the rule even after creating them in information fields of configuration manager.It is happening for few fields only.We are using 10.1.3 version of UCM.Kindly provide a solution if any.

Dhilipan,
I am trying to setup AES at the current Customer.
You are right on LR_JP to be linked to customs code list instead of ACE and I do achieve that if I were to maintain the Custom code list by maintaining the assignment for EAR in a separate test.
I was infact trying to follow the link: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30c7015e-c191-2d10-71b9-95907dc8edd1?overridelayout=t…
On this document, if you look at page# 14 thru 17, it has the steps I described in my original note with customs code still appearing in the drop down for 'EXCPT' for EAR.
Nevertheless, I wanted to default Type = C50 when the license type for the line on the Customs declaration is 'EXCPT' but if you see the very last screen-shot below, even though the license type configuration has default value as 'C50' it did not get pulled into the line item Documents tab when I tried to pick the category as 'CUII'.
Let me know your thoughts on defaulting the data into Customs declaration for AES filing.
What I want to achieve is the following:
When License type is 'EXCPT', system should default the type as 'C50'
Should put the License type 'EXCPT' into the number field
Should put the actual License# 'ENC' into the Supplement field
Should put the ECCN # '5A002' into the Details field
Thanks,
Prashant.

Not able to successfully subscribe to and see the TargetApplicationChosen event fire from Windows Phone 8.1

Matt,
Thanks for the reply.
In my current experience, I am not able to successfully subscribe to and see the TargetApplicationChosen event fire from Windows Phone 8.1.
In Windows Store 8.1 (Tablet), it works fine.
Questions
Is this event expected to fire in Window Phone 8.1 (Universal Apps, Not Silverlight 8.1) ?
Does this event depend on the target application to supply AppName?
Thanks for your help. Much appreciated.
Example Code Block
//From Page Contstructor or OnNavigatedTo Handler
_dataTransferManager = DataTransferManager.GetForCurrentView();
_dataTransferManager.TargetApplicationChosen += DataTransferManagerOnTargetApplicationChosen;
private void DataTransferManagerOnTargetApplicationChosen(DataTransferManager sender, TargetApplicationChosenEventArgs args)
//fires in tablet but not phone

This is not an answer, Mr. Wong. The link you referenced refers to the DataTransferManager class being supported only in Native apps, which includes Windows Phone 8.1 RT apps. All aspects of the DataTransferManager work except for the TargetApplicationChosen
event under a WP8.1 universal app. This event does NOT fire in the Windows Phone 8.1 RT API implementation of DataTransferManager.
You need to reopen this thread and address the issue, please. The lack of support for this event is problematic for some phone scenarios, most notably supporting NFC Tap and Share.
Mark Jones, Owner MJ App Factory

I am not able to verify my apple id thro the link (in my email)erro message is " /cgi-bin/Webob-jects/IDMSAccount.woa/wa/vetemail )

i am not able to verify my apple id thro the link (in my email)erro message is " /cgi-bin/Webob-jects/IDMSAccount.woa/wa/vetemail )
i pad was bought in uk and is used in india

lllaass,
Thank you for responding. I did not create a new ID. I went to Manage Your ID when changing my email. However, my problem is resolved. I called support and recieved help there.
Somehow my Ipod either wasn't registered to my Apple ID (even though I bought it from the Apple Store) or the registration didn't transfer with the email address change.
For some reason, though, I did lose all of my previous imessage conversations just because I switched my Apple ID email address. I also had to resync my Google accounts to Mail, Contacts, and Calendar.
Strange, but everything seems to be relatively back to normal now.

I was charged no my credit card for the app store and i am not able to login, i tried to use the forget password options but it isnt going through

i was charged no my credit card for the app store registeration and i am not able to login, i tried to use the forget password options but it isnt going through
Apple id : [email protected]

If the old ID is yours, and if your current ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

HT3819 how do I share movies/music between my computers. I have opened shared on both computers and both are on, but i am not able to drag anything from one to the other. Does anyone know where the settings button is on the bottom of the itunes screen?

how do I share movies/music between my computers. I have opened shared on both computers and both are on, but i am not able to drag anything from one to the other. Does anyone know where the settings button is on the bottom of the itunes screen?

Oops, I forgot a step between 7 and 8 ... before syncing the iPhone I need to explicitly send the document back to iTunes on the iPhone, or the changes won't come over at all ...
and then one more thing ... Numbers on iOS does NOT recognize a number of key features of the OSX app, such as conditional formatting ... so after editing my document on iOS and syncing it back to OSX on my Mac, all of those settings are lost (no more conditional formatting, have to do it all over again)
What am I doing wrong ?

Hi. I have a ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.Also my home button isn't working.

Hi. I have an ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.For ex. when i hit 8 (which is the second number in my passcode) the number 5 type in. Also my home button isn't working. Hope that was specfic enough.. thanks!!

Place the iOS device in recovery mode with one of thes programs and then restore via iTunes
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:

I am not able to set up my ipad2 - tried the regular help but nothing seems to working. itune simply wont detect the ipad

i am not able to set up my ipad2 - tried the regular apple help - did all those routines - but nothing seems to working. itune simply wont detect the ipad

http://support.apple.com/kb/TS1538

Not able to fine Create Item column in the Page personalization

Similar Messages

Maybe you are looking for