Not able to install Logic on mac with OSX. 10.8.2. Error message: Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported. I have logic studio 8 software purchased in 2007 and upgraded with logic studio 9 (purchased in 2009)
After an earlier attempt to move Logic from my other mac (OSX 10.6.8) with the migration assistant to my new mac with OSX 10.8.2. I've re-started the whole start up process by erasing the hard drive from the new machine and build it up from scratch. After a new "out of the box" start, I decided to install LOGIC from my disks : starting with my 2007 package Logic Studio 8 and upgrading with my Logic 9 package from 2009. When trying to start to install 2008 I got the error message : Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported.
What does this mean? HOw do I get this working under 10.8.2 as it works flawlessly under OSX 10.6.8. For sure I didn't buy a new machine to have OSX 10.8.2 but I suspect this is the roadblock to installing my logic package.
Help!
Mark,
Sorry...
I completely lost the thread (I actually got confused between you and another poster on a another forum that was asking the same basic question) and somehow ended up thinking you were trying to install on a PPC Mac
My apologies and please ingnore those parts of my last post relating to the PPC Macs...
You have an Intel Mac and therefore Logic Studio 2 Boxed Upgrade set should install/run on your Mac without issue. As I said earlier.. you do not need to try and install from the original Logic Studio 1 /Logic 8 Boxed set...(It won't work anyhow because you have an Intel Mac and that version had a PPC installer) but just install from the Logic Studio 2 / Logic Pro 9 Upgrade Boxed setof DVDs instead...
Have you tried the "Make Disk Image" solution I gave earlier? That normnally works under such circumstances as what you are describing can happen when your DVD drive cannot read the DVDs correctly... I have had this situation myself where one drive read them okay and another failed to do so for whatever reason. Making and then installing from Disk images of those exact same disks resolved the issue for me...
You can try to reinstall directly from the DVDs of course though under some circumstances it may not allow you to reinstall Logic Pro itself if that part of the original installation attempt was successful... in which case you can also try this... (It's probably the easiest method if Logic 9 was already installed and present in your Apps Folder)
If the Logic Pro App is in your applications folder..
Run Software Updates to update Logic Pro to a version that will run under 10.8.2 (The initially installed version of Logic will not)
Run Logic
Go to the menu bar in Logic and select Logic Pro/Install Additional Content and select all content in there..
This content is basically exactly the same as what is stored on the remaining DVDs of the boxed set so you might not need to use the rest of the DVDs to install from but download it all instead from Apple Servers...
Similar Messages
-
I can't install Rosetta Stone onto my new Mac OSX (version 10.7.5)
Any suggestions?
The message says "can't open application because Power PC applications are no longer supported."
Thanks!Thank you... spoke to Rosetta Stone and they said the same thing, and the give a nice discount when upgrading.
Normally 5 levels of a language run about $479. When upgrading, you can get the same 5 levels for $199.
Fewer levels costs even less. -
I just upgraded my MAC from OSX 10.5.8 to Snow Leopard and then to Mountain Lion 10.8.2. When I try to access my Microsoft Office for MAC (2004 edition) files I am getting a message "can't open Office because Power PC applications are no longer supported. How can I access all of my save Word documents? I just want to be able to retrieve all of my documents that were in Microsoft Office for Mac (2004). If I purchase the newest version of MS office for Mac from Apple will I be able to retrieve my old documents?
Use any number of free alternatives to your nearly decade old version of MS Office.
Consider
LibreOffice (donation-supported)
NeoOffice (free)
OpenOffice (free)
In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for years. Life is better without Microsoft. -
I just updated to Lion and my Microsoft Word, Excel and PowerPoint will not open because PowerPC applications are no longer supported. I bought this software from Apple and the store installed it when I bought the MAC. What do I do?
Buy version 2011 of MS Office.
Or you can download OpenOffice, LibreOffice or NeoOffice, which all come very close to working with MS files just like MS Office does.
Or iWord, I have heard, you can purchase. -
I am using Windows Vista with Outlook 2007 and iCloud. Everything has been great until this morning. I'm suddenly getting the message "Set of folders cannot be opened. The information store could not be opened. I tried running the repair utlity to repair the iCloud however I am still getting this error message.
I tried rebooting. It didn't change anything.
-
I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"
Because you are running lion.. FCS 6 is a Power PC app and Lion doesn't support Power PC anymore.. So you can't install it.. Three options..
1. Revert back to Snow Leopard.
2. Purchase FCP X...
if you can't stand FCP X
3. Call apple directly, 1800-MYAPPLE and ask to purachse FCS 3 for $999... (its FCP 7)
I just got FCS 3 today through apple phone sales.. -
I am trying to install Final cut pro 5 studio V1.0.1 (2005) on OS X lion. I get a message "You can't open the application final cut studio.mpkg because power pc application are no longer supported. My computer is New. Is their a link I can go to get tech support?
You won't find any help at tech support ... other than telling you the facts: Intel processor Macs require FCP 5.1 or higher. FCP 5.0 and earlier were written for PowerPC processor Macs, long before Apple switched to using Intel processors.
And then there's the issue of the OS. OS 7 will allow FCP 7 (and sometimes even FCP 6) to work OK, but versions earlier than that have spotty operation on Lion.
Here's a brief history of full FCP versions and recommended OS compatibility:
* = requires PPC ** = works with both PPC and Intel *** = require Intel
FCP 1.0* OS 9
FCP 2.0* OS 9
FCP 3.0* OS 9, OS 10.1, OS 10.2
FCP 4.0* OS 10.2, 10.3
FCP 4.5* OS 10.3
FCP 5.0* OS 10.3 (OS 10.4?)
FCP 5.1** OS 10.4, 10.5
FCP 6.0** OS 10.4, 10.5, 10.6 (OS 10.7?)
FCP 7.0*** OS 10.6, OS 10.7
FCP-X*** OS 10.6, OS 10.7
Essentially, you have a newer Intel processor Mac with a new OS and very old, incompatible software. You might be able to find a used version of Final Cut Studio 3 on sites like ebay or craigslist as it is no longer offered by Apple as an upgrade.
Alternatively, you could purchase and download FCP-X, but it is an entirely different application, sharing virtually nothing with previous versions of FCP.
-DH -
I upgraded to 10.8.4 and now I can' use my Epson scanner I get a message saying, "ou can't open the application Epson Scan apps because Power PC applications are no longer supported." I also can't synch my old Palm Pilot for the same reason.
How can I fix this?We need to sort out some facts here first:
• You cannot be running Mt. Lion on your iMac G5. What Mac is it? What is the Model Identifier listed in About This Mac; More Info; Hardware Overview
• What is the model of your Epson Scanner?
• Have you attempted to scan using Image Capture, located in your Applications folder?
• Your Palm Pilot software will only run in Snow Leopard; so depending upon which Mac you have, you will either have to:
1) partition your hard drive or add an external hard drive and install Snow Leopard into it to "dual-boot" when you want to access you Palm software, or
2) install Snow Leopard Server (now available from Apple for $20 telephone orders USA & Canda only) into Parallels 8 to run your Palm software in Mt. Lion:
[click on image to enlarge] -
I am trying to download ios 5.1.1 on my iphone from itunes and i get an error message that my iphone cannot be updated because the filmware is not compatible? What do I do?
iOS 5 is only compatible with the iPhone 3Gs and later...
Updating to iOS 5 http://support.apple.com/kb/HT4972 -
I have downloaded "Lightroom_5_LS11_mac_5_7.dmg" for Mac to update my Lightroom 5.6 (build 974614) but when I attempt to open it I get the following error message "Lightroom_5_LS11_mac_5_7.dmg can't be opened as the disk image is not recognised". I'm running Yosemite OS 10.10 on a Macbook Pro (Retina, 13-inch, Late 2012 with 2.9 GHz Intel Core i7 processor).
Vk2mh it sounds like the download was not complete or corrupted. Where are you downloading the update from? Have you tried downloading again?
-
I keep getting error message, "can't open application PACE because PowerPC applications are no longer supported." I've run Clean My Mac and I still get the error.
Use the Finder "Go" menu while holding down the option key to expose your User / Library folder.
Look in the Application Support folder for PACE items and delete them. -
Pages software in 10.8.3 does not support previous work done on microsoft office 2004. Pop up says -- You can't open the application "Mircosoft Excel" because Power PC applications are no longer supported. What can I do now?
Use Numbers, OpenOffice, LibreOffice, Microsoft Office 2008 or newer, Google Docs, or similar tools to open the files.
(85829) -
logic pro 7 won't open and power PC applications are no longer supported appears, can anyone help?
You'll have to update Logic Pro.
-
i am trying to restore my mac osx 10.7.4 from an ext lacie harddrive and getting message "u can't open the application lacie backup support because power pc application are no longer supported"
Use any number of free alternatives to your nearly decade old version of MS Office.
Consider
LibreOffice (donation-supported)
NeoOffice (free)
OpenOffice (free)
In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for years. Life is better without Microsoft. -
after updating to Mavericks a window pops up saying "Power PC applications are no longer supported" when I try to open AppleWorks6, Microsoft Word, and Illustrator CS. How can I access my files. Secondly, is there a way to allow these programs to function?
MichelPM wrote:
I use those terms primarily for users who seem not too computer savvy as explaining and going through the procedures can be daunting to a user who doesn't do much more than just being able to install and use software on a basic or novice level.
That is why I wrote the "Installing Snow Leopard Server into Parallels for DUMMIES" guide, to give a literal step by step instruction set on how to use Parallels in this situation for a basic or novice level user on up!
http://forums.macrumors.com/showpost.php?p=17285039&postcount=564
Quite honestly, a step by step guide to install Windows into Parallels could be needed by some basic or novice users, as well!
My point is to not scare aware a user with a problem where a potential solution exists.
This is especially true because some of the few, but vocal, "naysayers" about this approach would use your statements to validate their continued criticism of it.
One guy in particular criticises every option other than upgrading to Mavericks compatible software, even when the OP clearly expresses a problem where that option does not exist! ... and he was an early and very vocal proponent of the "installing Snow Leopard into a new partition - 'dual-booting' solution" when Lion was first released back in 2011!
Maybe you are looking for
-
TV on the ipad - when it is going to be released?
Here are tweets I've gotten back from @FIOSTV over the last year about this app that was initially demoed by Verizon in August of 2010: 1/24/12 - will be limited channels - was just reviewing the final release candidate today 10/31/12 - I have it on
-
10g Preview: BUG: Infinite loop renaming entity attribute
9.0.5.0.0, Build 1375, Win2k SP3. BACKGROUND: After attempting to rename an EO on which a VO was based I received an error that indicated the VO was dependent on the attribute to be renamed. I removed the VO attribute from the VO's attribute list and
-
Hi experts, Please help me on this. I have modified me21n item overview table control with access key and added a field in table control, screen no. 1211. Added field is mepo1211-extwg (external material group). In the structure MEPO1211, I have adde
-
G4/QS 128 radeon 9200 mac edition & 24" monitor
Hello everyone!I just bough a 24" samsung lcd/tft display.I have the radeon 9200/128 agp card.This card is the PC version,flashed to work in the G4.When I 'm playing a tv show i downloaded and when i choose full screen the black seems to have bloches
-
Dear All, Can anyone give me the full configration details as well as the user transaction codes needed to send RFQ to vendor via email? Regards, Indranil