Not able to install Oracle VM Server and VM Manager on the same PC?

Hi, I've installed Oracle VM Server an created a VM for Oracle VM Manager (from template). Now I want to use the Oracle VM Manager to create another VM from template. I've untared the template and stored it in /OVS/seed_pool. However, when I go to "Resources -> VirtualMachineTemplates -> Import" and try to "Select from Server Pool (Discover and register)", I cannot discover anything (there is no server pool to select)!!
I have one Server Pool containing one Oracle VM Server. Also one VM for the OracleVMManager.
I appreciate any advise.

HI,
make sure you have created one sub folder before start import.
Jignesh

Similar Messages

  • We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode

    We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode. We are getting the error message as
    "Probing for video card :Intel corporation Unknown device 0152"
    We also tried as
    boot: Linux vga=2
    boot linux resolution 1024x768
    boot Linux noprob
    boot Linux skipdd
    But every time we got this message
    NB: We could able to install in text mode as
    boot: Linux text.
    But our requirement Linux in graphical mode

    1344675 wrote:
    We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode. We are getting the error message as
    "Probing for video card :Intel corporation Unknown device 0152"
    We also tried as
    boot: Linux vga=2
    boot linux resolution 1024x768
    boot Linux noprob
    boot Linux skipdd
    But every time we got this message
    NB: We could able to install in text mode as
    boot: Linux text.
    But our requirement Linux in graphical mode
    Why is your "requirement" to install in graphical mode?  Once you are past the installation itself, the only thing that buys you is that your server will have been configured to boot up to runlevel 5, running a graphical desktop (gnome or kde, I forget which).  And what does THAT buy you on a server?
    I do not run ANY of my Linux servers "in graphical mode" -- running a graphical desktop.  Nor did I run a graphical desktop when I had Solaris, AIX, or HP-UX servers.

  • Not able to install oracle fial over software

    Hi all,
    This is SAP Evironment
    SAP : ECC6.0
    OS  : WIN2003
    ORACLE : 10g
    I am not able to install Oracle failover software.
    I saw in note 986758
    Change the last line of the script sapofs.cmd from the temporary
    directory of
    @"%rootdir%\install\setup.exe"
    to
    @"%rootdir%\install\setup.exe" -jreLoc=
    c:\TEMP\OUIIA64\stage\Components\
    oracle.swd.jre\1.4.2.11.0\1\DataFiles
    When doing so, replace the name of the directory "C:\TEMP\OUIIA64"
    with the name of the temporary directory that you created during the
    installation of the Oracle software database
    I am not understanding what exactly this meaning.
    Please anybody help me in the loop
    Thanks&regards
    Ramakrishna

    Hi Ramakrishna reddy  ,
    Installing Oracle 10.2 on Itanium 2 systems on Windows contains the following sections.
    1) the Microsoft HotFixes required for the installation and  operation of the database
    2)the installation of the Oracle 10gR2 database software
    3) the installation of the current Oracle 10gR2 patch set
    4) the installation of the Oracle FailSafe server software  3.3.4.
    I guess the first 3 sections you have completed. The 4th section (installing Oracle FailSafe server) point 3 says the following
    Change the last line of the script sapofs.cmd from the temporary
    directory of
       @"%rootdir%\install\setup.exe"
    to
       @"%rootdir%\install\setup.exe" -jreLoc=
       c:\TEMP\OUIIA64\stage\Components\
       oracle.swd.jre\1.4.2.11.0\1\DataFiles
    When doing so, replace the name of the directory "C:\TEMP\OUIIA64" with the name of the temporary directory that you created during the installation of the Oracle software database in step 3.
    Here the step 3 points to the section 2 (installation of the Oracle 10gR2 database software). i.e it is referring to the point 3. i.e
    Create a temporary directory, for example, C:\TEMP\OUIIA64. Note
    that this directory is also required for the installation of Oracle
    Failsafe (see below).
    You have to replace directory "c:\TEMP\OUIIA64" with what you have given as temp directory while installing Oracle 10gR2 database software.
    Hope this clarifies now.
    Regards,
    Arun.

  • Not able to install oracle 10.2.0.4

    we are trying to install SAP ERP 6.0 SR3 with oracle 10.2.0.4 on windows server 2008 R2 enterprise, but we are get getting some error
    The dump number for oracle was 51036975.
    We are not able to install oracle.
    Can any one find me a solution for this problem

    RAVITEJA8192 wrote:
    we are trying to install SAP ERP 6.0 SR3 with oracle 10.2.0.4 on windows server 2008 R2 enterprise, but we are get getting some error
    What was the error ?
    Thanks

  • Oracle HTTP Server and Node Manager

    Hi,
    I installed Oracle HTTP Server with Node Manager. I set "CrashRecoveryEnabled=true" in the nodemanager.properties. It works fine when I reboot the machine, but when I kill the root process (kill -9), the new process can not be started as the previous process does not have enough time to die and still uses the ports. I tried to run "nmGenBootStartupProps" in wlst, or set the
    RestartMax=2
    RestartDelaySeconds=5
    variables in "[domain_name]/servers/[server_name]/data/nodemanager/startup.properties" - no success.
    Any ideas, how to set the number of retries and the delay between restarts?
    Versions:
    Oracle HTTP Server: version="12.1.3.0.0"
    java version "1.7.0_79"
    OHS log:
    [2015-05-04T11:43:48.0653+02:00] [OHS] [NOTIFICATION:16] [OHS-9999] [mod_weblogic.c] [host_id: dev-oep-soalb-1] [host_addr: 192.168.0.226] [pid: 18651] [tid: 140166670751552] [user: app] [VirtualHost: main]  WebLogic Server Plugin version 12.1.3 <WLSPLUGINS_12.1.3.0.0_LINUX.X64_140421.1459>
    [2015-05-04T11:43:48.0854+02:00] [OHS] [NOTIFICATION:16] [OHS-9999] [core.c] [host_id: dev-oep-soalb-1] [host_addr: 192.168.0.226] [pid: 18651] [tid: 140166670751552] [user: app] [VirtualHost: main]  Oracle-HTTP-Server-12c/12.1.3.0.0 (Unix) mod_ssl/12.1.3.0.0 OtherSSL/0.0.0 mod_plsql/11.1.1.0.0 configured -- resuming normal operations
    [2015-05-04T11:48:53.9584+02:00] [OHS] [INCIDENT_ERROR:32] [OHS-9999] [worker.c] [host_id: dev-oep-soalb-1] [host_addr: 192.168.0.226] [pid: 18838] [tid: 140103489120064] [user: app] [VirtualHost: main] (98)Address already in use:  make_sock: could not bind to address 192.168.0.226:80
    [2015-05-04T11:48:53.9585+02:00] [OHS] [INCIDENT_ERROR:20] [OHS-9999] [worker.c] [host_id: dev-oep-soalb-1] [host_addr: 192.168.0.226] [pid: 18838] [tid: 140103489120064] [user: app] [VirtualHost: main]  no listening sockets available, shutting down
    [2015-05-04T11:48:53.9585+02:00] [OHS] [ERROR:32] [OHS-9999] [core.c] [host_id: dev-oep-soalb-1] [host_addr: 192.168.0.226] [pid: 18838] [tid: 140103489120064] [user: app] [VirtualHost: main]  Unable to open logs
    Node Manager log:
    <May 4, 2015 11:37:50 AM CEST> <INFO> <Loading domains file: /opt/app/soalb_domain/nodemanager/nodemanager.domains>
    <May 4, 2015 11:40:18 AM CEST> <INFO> <Loading identity key store: FileName=/opt/app/soalb_domain/security/DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
    <May 4, 2015 11:40:18 AM CEST> <INFO> <Loaded NodeManager configuration properties from '/opt/app/soalb_domain/nodemanager/nodemanager.properties'>
    <May 4, 2015 11:40:18 AM CEST> <INFO> <Node manager v12.1.3 #1604337>
    <May 4, 2015 11:40:18 AM CEST> <INFO> <soalb_domain> <soalb_server1> <Startup configuration properties loaded from "/opt/app/soalb_domain/servers/soalb_server1/data/nodemanager/startup.properties">
    <May 4, 2015 11:40:19 AM CEST> <INFO> <Secure socket listener started on port 5556, host localhost/127.0.0.1>
    <May 4, 2015 11:43:53 AM CEST> <INFO> <soalb_domain> <soalb_server1> <The server 'soalb_server1' is running now.>
    <May 4, 2015 11:48:53 AM CEST> <INFO> <soalb_domain> <soalb_server1> <The server 'soalb_server1' with process id 18672 is no longer alive; waiting for the process to die.>
    <May 4, 2015 11:48:53 AM CEST> <INFO> <soalb_domain> <soalb_server1> <Server failed so attempting to restart (restart count = 1)>
    <May 4, 2015 11:48:54 AM CEST> <SEVERE> <soalb_domain> <soalb_server1> <Unexpected error while monitoring server>
    java.io.IOException: Failed to start the server soalb_server1
    Check log file /opt/app/soalb_domain/system_components/OHS/ohs_nm.log
    Check log file /opt/app/soalb_domain/servers/soalb_server1/logs/soalb_server1.log
            at oracle.ohs.plugin.nodemanager.OhsProcessManagementPlugin$ProcessImpl.buildIoException(Unknown Source)
            at oracle.ohs.plugin.nodemanager.OhsProcessManagementPlugin$ProcessImpl.start(Unknown Source)
            at weblogic.nodemanager.server.DecoratedSystemComponentManager$DecoratedProcess.start(DecoratedSystemComponentManager.java:129)
            at weblogic.nodemanager.server.ServerMonitor.startProcess(ServerMonitor.java:441)
            at weblogic.nodemanager.server.ServerMonitor.runMonitor(ServerMonitor.java:406)
            at weblogic.nodemanager.server.ServerMonitor.run(ServerMonitor.java:295)
            at java.lang.Thread.run(Thread.java:744)
    ohs_nm.log:
    <2015-05-04 11:48:53> <INFO> <OHS-0> <The server 'soalb_server1' with process id 18672 is no longer alive; waiting for the process to die.>
    <2015-05-04 11:48:53> <INFO> <OHS-0> <Server failed so attempting to restart (restart count = 1)>
    <2015-05-04 11:48:53> <INFO> <OHS-4018> <Starting server soalb_server1>
    <2015-05-04 11:48:53> <INFO> <OHS-0> <Running /opt/app/ohs12c/wlserver/../ohs/bin/httpd.sh httpd.worker -k start -f /opt/app/soalb_domain/config/fmwconfig/components/OHS/instances/soalb_server1/httpd.conf>
    <2015-05-04 11:48:53> <INFO> <OHS-0> <[Mon May 04 11:48:53 2015] [warn] Errors will be logged into /opt/app/soalb_domain/servers/soalb_server1/logs/soalb_server1.log>
    <2015-05-04 11:48:54> <INFO> <OHS-0> </opt/app/ohs12c/wlserver/../ohs/bin/httpd.sh httpd.worker -k start -f /opt/app/soalb_domain/config/fmwconfig/components/OHS/instances/soalb_server1/httpd.conf: exit status = 1>
    <2015-05-04 11:48:54> <INFO> <OHS-4005> <Check the instance log file for more information: /opt/app/soalb_domain/servers/soalb_server1/logs/soalb_server1.log>
    <2015-05-04 11:48:54> <SEVERE> <OHS-0> <Failed to start the server soalb_server1>
    <2015-05-04 11:48:54> <SEVERE> <OHS-0> <Unexpected error while monitoring server>
    Node Manager properties:
    #Wed Apr 29 18:31:26 CEST 2015
    #Node manager properties
    #Wed Apr 29 17:18:21 CEST 2015
    DomainsFile=/opt/app/soalb_domain/nodemanager/nodemanager.domains
    LogLimit=0
    PropertiesVersion=12.1.3
    AuthenticationEnabled=true
    NodeManagerHome=/opt/app/soalb_domain/nodemanager
    JavaHome=/opt/app/jdk1.7.0_79
    LogLevel=INFO
    DomainsFileEnabled=true
    StartScriptName=startWebLogic.sh
    ListenAddress=localhost
    NativeVersionEnabled=true
    ListenPort=5556
    LogToStderr=true
    SecureListener=true
    LogCount=1
    StopScriptEnabled=false
    QuitEnabled=false
    LogAppend=true
    StateCheckInterval=5000
    CrashRecoveryEnabled=true
    StartScriptEnabled=true
    LogFile=/opt/app/soalb_domain/nodemanager/nodemanager.log
    LogFormatter=weblogic.nodemanager.server.LogFormatter
    ListenBacklog=50
    Startup properties:
    #SSLArguments=-Dweblogic.security.SSL.ignoreHostnameVerification\=false -Dweblogic.ReverseDNSAllowed\=false
    RestartMax=2
    RestartDelaySeconds=5
    FileTimeSpan=24
    RestartInterval=3600
    FileTimeSpanFactor=3600000
    RotatedFileCount=7
    RotationType=bySize
    #AdminURL=http\://192.168.0.224\:7001
    NumberOfFilesLimited=true
    AutoRestart=true
    RotationTimeStart=00\:00
    FileSizeKB=500
    Regards,
    András

    To deploy your FMX you need AS 10.1.2 Forms installed, and then you can use AS control or Forms server configuration file.
    For more information regarding FMX deployment, refer to http://download.oracle.com/docs/cd/B14099_19/web.1012/b14032/toc.htm
    Regards,
    Preet

  • Installed new hard drive and windows 7 at the same time. Left old hard drives in computer but unable to get bookmarks from old drives to new.

    Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.

    Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
    http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

  • I am not able to change  photo to video from Camera mode.  The same problem is occurred now with iPhone.  What is a problem?

    I am not able to change  photo to video from Camera mode.  The same problem is occurred now with iPhone.  What is a problem?

    Ahhhh... didn't know  this with iOS 7.  Thank you so much.

  • Couldn;t able to install Oracle Vm server

    Hi all,
    I am trying to install ORACLE VM SERVER but i am getting an error
    VFS: Cannot open root device "<NULL>" or unknown-block(0,21)
    Please append a correct "root=" boot option
    Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,21)please suggest me....

    Satish,
    there is as such no directory there...
    [root@localhost Oracle VM Server cd 1 20080828]# ls
    EULA        GPL       Oracle                 RPM-GPG-KEY-oracle  TRANS.TBL
    eula.en_US  images    RELEASE-NOTES-en.html  Server              VT
    eula.py     isolinux  RPM-GPG-KEY            supportinfo
    You have new mail in /var/spool/mail/root
    [root@localhost Oracle VM Server cd 1 20080828]#
    [root@localhost Oracle VM Server cd 1 20080828]#

  • Recommended configuration for Oracle VM Server and VM Manager

    Hi,
    Currently we have two dedicated DELL servers (VM server and VM Manager) for which are building an Oracle stack environment.
    We are facing a problem which we didn't find answer from Oracle docs or via Google. The problem is that the virtual machines we create in VM Manager can't be connected to the outside world, and we think it's because our host (Hetzner) does not allow ports eth1-eth3 to be connected to the servers, unless we have these servers in the same rack and connected via switch.
    Our question is, is it recommended configuration to have VM Server and VM Manager servers in the same rack and connected via switch?
    If yes, the next question is, if we need in the future to add one more dedicated DELL server to our configuration to host virtual machines, is it possible if the new third dedicated DELL server is not connected via switch to the two dedicated DELL servers we have already have?
    If no, the next question is, what could be the recommended configuration and solution to our problem in our case that ports eth1-eth3 cannot be connected to the servers?
    Please do not hesitate to ask if you need more information. I do appreciate your time and expertise. Thanks.

    The architectural environment is now done like on this graphic. For security reasons Hetzner hosting service does not allow ports eth1-eth3 to be connected, but in internal network under switch they do.

  • Can you use iTunes match and not get duplicates if you maintain mp3s and aiffs files of the same song in either the same or separate libraries?

    I maintain a collection of aiff files and mp3 files of the same music.
    Aiff for home listening and Mp3 for my devices.
    I can arrange these in the same or seperate libraires.
    Will "itunes match" duplicate the songs in the cloud if they in the same or seperate libraies on the same mac?
    If not, is anyone aware of how to manage seperate Mp3 and Aiff libraries so as not to get duplicates in itune match?
    All assistance is appreciated.
    Thanks!

    Hello mracole,
    I checked my "purchases" and the 7/19/13 purchases don't show up.  However, the earlier versions from usually several years back...the ones that are Matched...often do show up in my Purchases.  I suspect that somehow those REALLY purchased several year old versions were deleted and redownloaded by me so I could change them to the 256 kbps versions under iTunes Match.  They were probably 128 kbps versions originally when purchased.
    Why the earlier versions that were really purchased are now identified as Matched is puzzling.
    Why I now have Purchased versions from 7/19/13 is puzzling too...especially since these versions do NOT show up in my purchases.
    Calling Apple Support if a good idea unless someone can explain this mystery.  I might even take one of my laptops to the Apple store and show a Genius.
    Thank you very much for taking the time to respond, Mr. Luigi

  • Not able to install Oracle Client 11g R2 64 bit on Windows 7 Enterprise 64

    I am having issues. I get "Central Inventory is not locked" and Oracle 11g R2 just closes itself.
    I had some previous installations of Oracle, but I am unsure how to get rid of them all. I already removed the registry keys associated with Oracle. Any help here?

    One user above reported installing the 64 bit odbc drivers and then the 32 bit drivers. How did you do that? I'm a neophyte to this.
    I'm trying to get a 32 bit ODBC oracle driver to work on a server 2008 R2 machine. I downloaded the 11gR2 x64 client from oracle. The install process makes no mention of 32bit vs 64bit installation. After running the instalation I can run the ODBC administrator and generate a DSN for oracle. When I run the 32 ODBC administrator there is no oracle driver available except the microsoft driver for oracle. When I select that it says that I need to install oracle.
    I had at first tried to install 11g instant client. However that didn't work for the 2008 R2 machine. It complained about some registry error when I tried to run the ODBC install program. I need to get it to work for a customer asap.

  • Not able to install  Oracle 10g Express on linux 64bit based on Dude's intr

    I followed "https://forums.oracle.com/forums/thread.jspa?threadID=2200434" to install oracle 10g xe on Ubuntu 10.10 AMD 64-bit
    but I ran into below error while I was trying to install 10g XE on linux 64bit
    root@vdevluxcnhz0021:~# dpkg -i force-architecture libaio_0.3.104-1_i386.deb   --------- this step is error
    dpkg: warning: overriding problem because --force enabled:
    package architecture (i386) does not match system (amd64)
    dpkg: regarding libaio_0.3.104-1_i386.deb containing libaio:
    libaio1 conflicts with libaio
    libaio (version 0.3.104-1) is to be installed.
    dpkg: error processing libaio_0.3.104-1_i386.deb (--install):
    conflicting packages - not installing libaio
    Errors were encountered while processing:
    libaio_0.3.104-1_i386.deb
    Linux version
    root@vdevluxcnhz0021:~# cat /etc/issue
    Ubuntu 10.04.2 LTS \n \l
    root@vdevluxcnhz0021:~# cat /proc/version
    Linux version 2.6.32-28-server (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #55-Ubuntu SMP Mon Jan 10 23:57:16 UTC 2011
    Can you please help on this?
    Thanks
    Edited by: user1997872 on Jan 4, 2012 7:07 AM

    It looks like you will have to uninstall "libaio1", but I don't know for sure and don't have Ubuntu 10.4 available right now to play with.
    Sorry but the instructions are for Ubuntu 10.10, not 10.4, which is different.
    If you need to install XE on Ubuntu, I'd rather suggest 11gR2 XE:
    Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
    Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
    Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 how-to
    Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto

  • Not able to install Siebel Determination Server

    Hi,
    I have installed Oracle policy modelling (10.4.1) successfully, able to make rules.
    Now I have installed Siebel connector, done all the changes at Siebel side.
    How ever I am facing challenges in deploying Siebel Determinations Server, request you to please share the steps how to deploy Siebel Web determinations server.
    Or if you can share any document for the same on my email id
    <removed by moderator so that you don't get spammed for all Eternity>
    would be highly appreciated.
    Regards,
    Vineet Agarwal

    Hi Vineet,
    Bit old version OPA Siebel connector youtube video at here.
    Policy Automation - OPA Connector for Siebel Overview Part One
    http://www.youtube.com/watch?v=JZ8ocHeR7L8
    Policy Automation - OPA Connector for Siebel Part Two
    http://www.youtube.com/watch?v=6TMovRHihI0
    May you need describe here what exactly problem you have with your web server name and version.
    So that people can more detail advise at here.
    Also on the OPA 10.41 has Helth check tools for Siebel connector.
    http://www.youtube.com/watch?v=VjCZnlWlVYY
    Thanks
    Mayumi

  • Not able to install Oracle 11g R2 client in windows 8 machine

    Oracle universal installer window is not coming up in windows 8 machine, if any one installed Oracle 11G R2 client in windows 8. Please share those steps and if you have latest 11G client share that download link.
    Thanks in advance.
    Edited by: 969434 on Nov 4, 2012 10:48 PM

    Hi;
    Win 8 is not certified yet. Please use certification matrix at metalink and also check below note:
    Master Note For Oracle Database Client Installation [ID 1157463.1]
    Client / Server / Interoperability Support Between Different Oracle Versions [ID 207303.1]
    PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
    Regard
    Helios

  • Not able to install oracle DB 11.2.0.2 on Linux

    Hi,
    I tried installing Oracle DB 11.2.0.2 on RHEL 5.2, 5.5 and 6.0 but all the times, I am getting an error saying
    "/tmp/database/install/.oui: cannot execute binary file"
    The Kernel version for RHEL 6.0 is 2.6.32.71. Both the zip files were extracted appropriately. This is causing a lot of havoc. Please suggest a suitable solution for this.
    Your immediate reply will be highly appreciated.

    Yes, I have downloaded the correct package. Its a 64 bit Linux and have followed all the pre-requisites from the link http://docs.oracle.com/cd/E11882_01/install.112/e24326/toc.htm
    All the package versions are the latest and none of the steps have been missed. I am running this in a VM and on standard Intel Server(not IBM Server). Hence, please help me outI'll assume you haven't posted the full error message, which is possibly why others like Ed are pointing at a different direction. I still think you are running into an issue mentioned in other threads (e. g. {message:id=9543783}, as referenced by Helios above) and MOS (e. g. 980695.1), where this message is usually generated by the runInstaller wrapper when some platform dependent requirements are not fulfilled.
    Could you please post the complete command (including its base path) you execute to run the installer and the output of the following commands mentioned (equally or similarly) in the installation guide
    uname -a
    cat /proc/version
    /sbin/sysctl -a |grep -v net.
    ulimit -Sn
    ulimit -Hn
    ulimit -Su
    ulimit -Hu
    ulimit -Ss
    ulimit -HsAnd did you configure the xhost properly? You can't run the graphical installer without X-Server...
    -Udo

Maybe you are looking for

  • Windows 8.1 Not Activating On KMS Host

    I have a KMS 3.1 running on 2008R2. The goal is to be able to activate Windows 8.1. It all appears to be running properly, but the client running 8.1 will not activate. Below are a series of questions and errors: Environment:  Server: VAMT 3.1 on WS

  • FLICKERING PLAYBACK IN QUICKTIME OR iDVD w/ Ken Burns toggled "ON"

    FLICKERING in SLIDESHOW PLAYBACK IN QUICKTIME OR iDVD w/ Ken Burns toggled "ON" Posted INCORRECTLY EARLIER IN iPhoto 6 Forum: Apr 17, 2009 12:27 PM Hello everyone, and especially QuickTimeKirk if I can get his attention please---> After pressing "Pla

  • Time effect problem with adjusment layer

    Hi, I made an adjustment layer above two footages. Everything is working (color, levels etc.) with that except time effects. When I drag twixtor to it the video turns to red. The original picture: The twixtored one: And when I use timewarp effect thi

  • Table entries

    Hi, I have created a new table ZTSD_T001W which is a copy of T001W table.In this table I have created entries through SM30.Here in SM30 for one field VTBFI  i want to create a blank value as a default value.How can I do that? Regards, Hema

  • Themes box is empty when trying to create wish cards, calendars, etc...

    PSE  10 No formats appear in the themes column. Thanks