Not able to link more than one EO to the VO.

Hi All,
I have to add a new column from another table to the existing VO.
I have followed the below steps.
Step1: I have created a new EO for the new table
Step2: I have created a new VO which extends the existing VO.
Step3: While extending the new VO, i have added the new EO and old EO is also there and modified the query as per my requirement.
Step4: I have substituted the VO and bounced.
Step5: Through personalization, I have added a new field to the page and assigned the new column name as view instance.
Now when i run the page, values are not going to the database for the new column.
When i clicked on Aboutthis page, VO is substituted with the new VO, but it is attached to only one EO which is the existing one, And the new EO link is missing.
Can you please tell me whether i missed any steps or did any mistakes while performing the above steps.
It is urgent, please help me ...
Thanks,
Manjula

I am little bit confused.
Can you tell me whether I can have more than one EO updateable in a VO or not?
In my case, this is simple join, there is no Outer Joins in my query.
Yes you can an have more than one EO updateable in a VO if there is no Outer Joins in query.Can you tell me the subject of the thread or threadid. I couldn't find the thread what you are saying.
Actually that thread, i have followed the approach Tapash, mentioned ...at that time...but somehow it didn't worked in my case, anyways, you can surely give a try.I had 3-4 EOs with all outer joins.--Mukul

Similar Messages

Not able to add more than one gift for the GWP promotion.

Hi,
I have created a GWP promotion. This promotion is adding gift after adding corresponding product to cart. But, when I try to add the product second time, it's not adding the gift. I am using ATG 10.1.1 with CRS. In ATG merchandising guide, it is mentioned as GWP promotion will add gift only once.
How can we add gift second time?

The GWP templates create a "when" type of promotion, which means the rule is applied once. That matches the behavior you're seeing. If you want the rule to be applied more than once, you need a "for next" type of promotion. You've got two basic choices for how to do that.
If you've got one GWP promotion for which you want the "for next" behavior, you can create the promotion using the Advanced Condition and Offer option in the UI.
If you anticipate creating many "for next" GWP promotions, then it would probably be worthwhile to create one or more new templates. You can start with a copy of an existing GWP template and change the pmdlrule property. To see the effect of "for next' on a pmdl rule, either create an Advanced promotion or look at one of the non-GWP templates that get applied more than one, such as bogo. Details about creating your own templates appear in the "Adding New Promotions Templates" section of the "Understanding Promotions" chapter in the Commerce Programming Guide.
Before you put "for next" style GWP promotions into production, please be aware that some bugs have been discovered related to the manual addition and removal of gift items. A hot fix is available from Oracle Support.

TS2755 Ever since I updated my iphone 4 to 5.1.1, I am not able to send more than one picture at a time in a text message. Does anyone know how to fix this?

Ever since I updated my iphone 4 to 5.1.1, I am not able to send more than one picture at a time in a text message. Does anyone know how to fix this?

Yes, I know the photos stored on the device... But which app are you accessing the photos with? Which app do you want to be able to highlight more than one pic at a time in?
There are literally thosands of apps that access the iOS Photo Library - which one(s) are you using?

Not able to edit more than one function of new photos

I recently upgraded my iPhoto to 09 after shifting to Leopard 10.5 on my G5. Today, for the first time after the upgrade, I loaded about 100 photographs and have found that I am unable to edit more than one function at a time on these image. For example, the image contrast can be adjusted, but, following that, no other function or cropping appears to work. The saved image, after selecting "Done", doesn't show any change other than the initial edit. Surprisingly, I am able to perform multiple edits on the images that were already in the Library (8,500!). After looking at this forum's topics and trying some of the suggestions provided for other editing issues, I've tried to edit more than one function in full screen view, library and album modes with no success.
Any help would be appreciated.
thanks,
Message was edited by: Umnak ( showed incorrect OS on original)

If you go the PS or PSE route this many be of some help:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..

Not able to see more than one period in DRP Planning Book

Hi
Where do we set the no of periods( days, weeks etc) that should be visbile in the DRP planning book in the SAP SPP.
Also we are getting invalid periodicity in this planning book, when we select one of the available timebucked profile ids. Any clues on this ? How to set it correct?
Regards,

i think like in any other planning book, it should be in the Data view tab in the TB future.
you need to create time bucket profiles though that have the periods you need. And these periods need to be equal to or greater than the Storage bucket profile used in the linked planning area

How can I put more than One ComboBox in the Driving Frame of a Frame Driver

Hi,
I am working with a Frame Driver and I want that in the Driving Frame put more than one ComboBox to filter the report, for example, I want to put one combobox for City, another for Year, and another for Month, and when the user select the City, Year and Month and do click in Submit button, then in the Target Frame appears the information for those filters.
Does anybody know how to do that?
Thanks a lot.
Bye,

Hi,
It is not possible to have more than one combo in the source frame. This is because frame drivers can take only
two columns in the sql query, one is the display value and the other the return value.
Thanks,
Sharmila

Not able to update more than 10,000 records in CT04 for a characteristic

Hi all,
We are not able to update more than 10,000 records in CT04 for a certain characteristic.
Is there any possible way to do this?
Please advise...its a production issue.
Thanks.

Hello ,
Please consider using a check table for the characteristic involved if you are working with large
number of values assigned
With a check table you have a possibility to work with a huge amount of values , also the performance should improve
Please refer to the link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/ec/62ae27416a11d1896d0000e8322d00/frameset.htm
Section - Entering a Check Table
Hopefully the information helps
Thanks
Enda.

Form that is a map of Ohio. I created layers for each county so I can click and it highlights, but I need to be able to click more than one. How do I do that?

Form that is a map of Ohio. I created layers for each county so I can click and it highlights, but I need to be able to click more than one. How do I do that?

Looks nice!
I understand what you've done now. You used the "Set Layer Visibility" command which sets the on/off state of all the layers at once. What you need is a more subtle approach, one that will only change the state of the specific layer associated with the button, not the rest of them (so that you could have multiple layers enabled at the same time). The way to do that is by using a script.
I wrote the script for you and applied it to the top-left counties (WILLIAMS and FULTON), in the attached file. You can now copy the actions I associated with those buttons to the rest of them, and it should work as you want it to.
The file: MAP-HHA-Geographic(3)_edited.pdf - Google Drive

NTLM Authentication : why is it not possible to create more than one NTLM realm ?

Hello,
I'm wondering why it is not possible to create more than one NTLM realm on a wsa.
Can you explain exactly what is the blocking point ?
Thanks in advance
Regards

Well, at this point (pre 7.5), there isn't an agent, the WSA is joined to the domain, just like a Windows box, it authenticates via that trust relationship. From that point it is all based on how NT/Active Directory domains work. As long as there is a trust between the domains, you can can auth users from as many domains as you like.
There is an agent in the works. The ADAgent will be released with 7.5. The code is already available, it was released with the ASA ver 8.4, and it will be used to pass authentication info to the WSA. At this point, current versions still require trust relationships between all of the domains touched.
Taken from the setup guide: http://www.cisco.com/en/US/docs/security/ibf/setup_guide/ibf10_install.html#wp1054011
Before you configure even a single domain controller machine using the
adacfg dc create
command, ensure that the AD Agent machine is first joined to a domain (for example, domain
J
) that has a trust relationship with each and every domain (for example, domain
D[i]
) that it will monitor for user authentications (through the domain controller machines that you will be configuring on the AD Agent machine).
Depending on your Active Directory domain structure, the following scenarios are possible:
1. Single Forest, Single Domain—There is only one domain, D[i] for all domain controller machines, which is one and the same as domain J. The AD Agent machine must first be joined to this single domain, and since no other domains are involved, there is no need to configure any trust relationship with any other domain.
2. Single Forest, Multiple Domains—All the domains in a single forest already have an inherent two-way trust relationship with each other. Thus, the AD Agent must first be joined to one of the domains, J, in this forest, with this domain J not necessarily being identical to any of the domains D[i] corresponding to the domain controller machines. Because of the inherent trust relationship between domain J and each of the domains D[i], there is no need to explicitly configure any trust relationships.
3. Multiple Forests, Multiple Domains—It is possible that domain J might belong to a forest that is different than the forest to which one or more of the domains D[i] corresponding to the domain controller machines belong. In this case, you must explicitly ensure that each of the domains D[i] has an effective trust relationship with domain J, in at least one of the following two ways:
a. A two-way external trust relationship can be established between the two domains, D[i] and J
b. A two-way forest trust relationship can be established between the the forest corresponding to domain D[i] and the forest corresponding to domain J

I have more than one copy of the same song in my iTunes. Some have the icloud symbol next to them and some do not. I need to clean this up but I am afraid to delete the songs for fear I will lose them.

I have more than one copy of the same song in my iTunes. Some have the icloud symbol next to them and some do not. I need to clean this up but I am afraid to delete the songs for fear I will lose them. Please help! On top of that my Mac keeps telling me my start up disc is full and I am deleting stuff like crazy!

Welcome to the  Discussion Forums
It won't be a problem if you delete your extra copies.
I don't download very much to my tv, I do sometimes if I'm in bed but usually I do it from itunes. However if you have not fully downloaded something to the tv it is possible to start the download from itunes as well, you have likely activated 'check for downloads fin itunes in some way, could be by opening itunes, selecting 'check or downloads' from the advanced menu or that you simply have automatically check for downloads set in your prefs and it has checked coincidentally.

HT1040 why can i not seem to order more than one print at a time, which obviously becomes expensive with the shipping, it does not seem to offer me the facility to choose again?

why can i not seem to order more than one print at a time, which of course becomes expensive with shipping, it does not seem to offer me the facility to choose again? either order or cancel!

make an album containing the photos you wnat to print, select all photos in the album and order
LN

IPhone will not display calendar items more than one day in advance.

iPhone will not display calendar items more than one day in advance.
I used to have a droid and loved the calendar on the main screen that used to show me the next few appointments coming up - so far I have only figured out how to put in to show for next day or 2 days or etc....
is there any way to show tomorrow and next few days in notification, or is there a good app out there that will greet me. dont have 4s to ask just a 4
i used google calendar and they all show up in calendar but REALLY need the functionality to see what is coming up, kind of like what you see in outlook or any other email program.
please help out this noob.

Is this what you're doing:
OS X Yosemite: Recover your entire system

9.3.1- Not able to see more than 1 errors in application.log file

Hi,
In 9.3.1. version, I am not able to see more than 1 errors in application.log file during dataload without rules files.
If anybody has faced this solution, pls let me know the cause.
Thanks
jazz

Hey Jazz,
in the first row add a rule file with no load file change the path to what you want. then insert a new row add your load file here. it should have the path from the previous row in the error file. Then delete the first row and run. I had to do this for a level zero load and was the only thing I could figure out so far

Not able to select more than two values

Based on picklist.fmb, I created a list item in a form.
I am able select many values using SHIFT but I am not able to pick more than two values using CTRL key.
Anything I did mistake or picklist won't support picking more than two values using CTRL?
Also I am not able to get the scroll bar attaching to this list item.
Please advise.
Thank you,
Prasad

hi,
You have to set the LINES property of the table control In the PBO of your screen, to the number of entries in the internal table.
data: lv_line type i.
DESCRIBE TABLE gt_table LINES lv_line.
table_control-lines = lv_line + 1.
or else
You can do two thing in table control properties check horizontal and vertical scroll options plus in PBO you can based on number of lines in internal table assign it to TC_ABC-LINES if no lines are there then add by default 20..10.. any number of lines as you want.

Not able to view more than two line in table control

Hi all,
I am not able to see more than two lines in table control. Although my table control height is 21...
Please see attached pic and suggest me what to do.

hi,
You have to set the LINES property of the table control In the PBO of your screen, to the number of entries in the internal table.
data: lv_line type i.
DESCRIBE TABLE gt_table LINES lv_line.
table_control-lines = lv_line + 1.
or else
You can do two thing in table control properties check horizontal and vertical scroll options plus in PBO you can based on number of lines in internal table assign it to TC_ABC-LINES if no lines are there then add by default 20..10.. any number of lines as you want.

Not able to link more than one EO to the VO.

Similar Messages

Maybe you are looking for