Not Able To Login With Previous Apple ID
Can a Mod pleaae help me? I was unable to login in to the new forums system with my old
Apple ID. I had to create anothger ID using another email address. I would like my old ID back.
My alias jaco23. Can a mod please help me? reset my old ID please?
Jaco
I can't either! Been going on for a week now. I kept getting thie following error with a form to send in for help which I did 7 times and never heard back:
We're sorry. Your account could not be updated due to system issues.
Please contact Apple Support Communities with the information below to update your account.
It took me 5 times to create a new id and I want my old one back since I've been on the forums for years now and I want to access my info I've saved there. What can we do? Thanks
Similar Messages
-
Not able to login with Firefighter ID
Hi,
I configured the SPM and was able to test the firefighter login in our sandbox. Recently we upgraded from SP5 to SP8, since then I am not able to login with the firefighter id. When I try to access the "Security" tab in /n/VIRSA/VFAT I am getting the error messge " These settings are NOT required anymore. with Message no. /VIRSA/VFAT710 ".
Any idea what might have changed and where should I look to fix this. Appreciate all your help.
Thanks,
RajHi,
There was some security leak in the previous design of Firefighter in which we used to maintain the password in security table.
So to overcome this issue, there is no need to maintain the password in security table as the logic has been changed by which the FFID login.
So from SP07 onwards there is no need for security table.
Regards,
Shweta -
hi folks, i am not able to login with PS/PS in the Datamover and app desingner. It gives me the errore that the user name is not valid. My psdbowner table does not have any entry about the owner of my DB even after running the dbowner.sql. i tried to update this table but it gave me the message that no rows updated.
<s>SYSADM is nothing but an Oracle user, when connecting with this user in DataMover, it's bootstrap mode. PS is different, whether it's an Oracle user, it should be locked, PS is also an application user (should exists in PSOPRDEFN). The latter is used when connecting to DMS/AppDesigner.
1. Check the connectivity properties in Configuration Manager: connectid=people, connect password=peop1e
2. Try to connect onto the database with people and check if you can select from tables PSACCESSPRFL, PSOPRDDEFN and PSDBOWNER
3. From within the database, check the owner of the table PSDBOWNER (should be PS which must be locked).
And please, try to give the answers to the questions above (what update statement...). If that's a fresh install, or you've missed some steps, or something went wrong during the initial load (check the logfile).</s>
Due to the lack of information, I was going to the wrong way. Fortunately for Hick, Hakan rightly pointed out the step of the installation. And yes, PS Oracle user account is locked and nothing wrong to have PSDBOWNER empty at this stage, it is filled up when load the very first dms (there's a statement like INSERT INTO PS.PSDBOWNER VALUES...). I think some documentation reading here should not hurt.
Sorry, but I'm really fed up with people providing too few information (or no information at all) about their situation. I give this thread up.
Nicolas.
Edited by: N Gasparotto on Jan 15, 2013 1:30 PM -
SIM user is not able to login with hand held device
SIM user of particular store is not able to login with handhel device but able to login with terminal.
Please tell me whether it is configuration issue or data issue.You can check whether password is expired or not. Is it same login details used for SIM GUI? If so, are you able to login to GUI.
-
FDQM - Not able to login with the admin user
Hi,
I am not able to login to FDQM web browser using the admin user. I am facing the error as below;
Error: Error retreiving security agent header.
Detail: InnerException1: Access to the path 'D:\Oracle\Middleware\EPMSystem11R1\logs\fdm\Common\' is denied.
I tried checking the Load Balance Configuration settings, where i found the Shared services Test connection was failing. But i am able to login to Shared services with admin user.
Can any one please help me. It is most critical and your replies are most welcome & appreciated.
Thanks
DamodharWhen was the last time you were able to login and what has changed since that time?
Has someone changed access privileges to that specific location => Access to the path 'D:\Oracle\Middleware\EPMSystem11R1\logs\fdm\Common\'?
Thank you,
Todd Rebner -
Not able to login with new LDAP user in portal..
All,
We have created a new user in our LDAP environment in Portal. ( not UME ). I am able to view the user id in Identity management and assigned the necessary roles. but, i am unable to login using the new user id. Can anybody please tell me what is missing here ? Thanks in advance.Hi Addy,
As Raghu said, this seems to be a password problem.
Log into the Portal as an User administrator.
Find the user and Click on Modify.
In User Information, Add a new password.
Then try to login with the given user id again with the new password.
Good Luck!!!
Biroj Patro -
Not able to login with AEM 6.0 Configuration
HI All,
After Migrating to OAK (CRX3) Repository i am unable to login and getting as below error
Also I configured Jackrabbit Oak LdapIdentity Provider, Jackrabbit Oak Default Sync Handler and Jackrabbit Oak External Login Module
So basically i am not getting Login(welcome) Screen but I could able to login to OSGI console
*ERROR* [qtp1173581562-32] com.day.cq.auth.impl.LoginSelectorHandler requestCredentials: Abort login due to apparent misconfiguration.
*ERROR* [qtp1173581562-32] com.day.cq.auth.impl.LoginSelectorHandler requestCredentials: Possible reasons: login page not existing or not accessible
Inputs would be Appriciated!!!Hi,
"IF someone can help me and to guide me how enable this SAP* using or adding or amending the parameter 'login/no_automatic_user_sapstar' = '0' Zero"
- Please set the parameter login/no_automatic_user_sapstar = 0 in Default profile and restart instance to activate SAP* with password PASS. If same parameter exists in Instance profile, please change there also before restart.
As soon as you login with SAP*, please reset the password of DDIC in client 800.
"Also I have created some users for learning and testing propose but I have give SAP_ALL authorization in the profile but What I have understood is giving SAP_ALL making the user super User (plz correct me if I am wrong)
So What profile WE must select so that a normal user who can be able to use most of the task and learn the ABAP or other features configured"
- You can assign SAP_NEW and SAP_CUST or equivalent customized profiles/roles to users for learning and testing propose.
"And What profile does this user has to be in because the faculty from whom I am learning BASIS told me it has to be in client "800" if this is correct then how can I copy a user from one client to another client"
- You can copy entire user master (profile SAP_USER) from one client to other using local client copy (SCCL).
Hope you are answered.
Thanks,
Siva Kumar -
Not able to login with domain account on Win10 Enterprise build 10049
On my Windows 10 Enterprise technical preview machine (build 10049), it locked out after inactivity and now only offers the option to login with "Other user". On this screen, it only seems to want a Microsoft account, although if I enter a valid
Microsoft account it says the password is wrong. It won't accept a domain account, and it does not seem to offer any way to switch to the normal domain login screen.
I am locked out of the PC and unable to use it. When I reboot, it goes back to the same login screen.
Help!Hi,
Is the system joined to a domain? If a machine is joined to a domain, then after restart, the domain name should be displayed under "Other User" even though it doesn't display other user accounts. See snapshot below:
And for domain account, please make sure to type the format as domain\username
While if you have other local user account, then I recommend you login to that user acocunt (format as .\localusername) check the system info and check the policy below:
Local Security Policy\Local Policies\Security policies\Interactive logon: Do not display the last user name, it should be "Not configured" or "Disabled".
Rrgards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Not able to login with window AD account
Hi,
I did all the necessary configuration for windows AD in cmc,
Here are the steps,
I did the following configuration to set up the WINDOWS AD,
1.Configured the service account for use with the AD plug in.
a)Created the service principal name (SPN) for service account
b)Set delegation for the service account.
2.configured the BI Plateform for use with the service account
a)Add SPN to the CMC.
b)Set the SIA to run as the service account
c) verified that service account and windows AD login account is
working checked that no error message appeared and could see white screen
I tried login with my AD account credential in to CMC but shows error showing "not authorized to login"
can any1 please help
Thanks,
pavanaAmbarish,
is this the Kerberos configuration file, I need to set up
[libdefaults]
default_realm = DOMAIN.COM
dns_lookup_kdc = true
dns_lookup_realm = true
default_tkt_enctypes = rc4-hmac
default_tgs_enctypes = rc4-hmac
[domain_realm]
.domain.com = DOMAIN.COM
domain.com = DOMAIN.COM
.domain2.com = DOMAIN2.COM
domain2.com = DOMAIN2.COM
[realms]
DOMAIN.COM = {
default_domain = DOMAIN.COM
kdc = HOSTNAME.DOMAIN.COM
DOMAIN2.COM = {
default_domain = DOMAIN2.COM
kdc = HOSTNAME.DOMAIN2.COM
[capaths]
DOMAIN2.COM = {
DOMAIN.COM = -
I was trying to get into the forum but was not able to get into discussion forum. whenever i clicked i got dome authorization failed message. This is even before trying to log in
A different message but i am not able to post the message. Refreshing multipletimes solves it temporarily
-
Not able to login with privilege levels
Hi,
i have created privilege levels in cisco switch especially level 7 if i login with that username and password ,after typing privilege mode password it is going to level 15.... what is the problem ........
commnads i configured is :
# username cisco level 7 password cisco
#enable secret cisco
............please help me where i have gone wrongHi, What model/IOS version that you use?
Rating useful replies is more useful than saying "Thank you" -
WLS not able to login with OID user
Hi
I have installed WLS 10.3.3 and had configured a new security realm which had OID as the authenticator . Set the details for the provider (OID) and updated , restarted the server . It was working fine till yesterday and I verified this by logging in to the WLS console with the OID user .
But now out of nowhere the login for OID users have started failing for the applications that are running on WLS . When tested the login for WLS console with the same OID user that is failing as well .
Not sure what to trace and how to figure out what is happening . Have verified that OID is working fine and this was done by hooking up OID to a standalone application and logging in with the OID users to that app.
Any help / pointers would be of great help .
Thanks
Srinath
Edited by: Srinath Menon on Nov 24, 2010 9:31 AMTry enabling sap* user again and once its enabled, use the user to provide yourself the necessary access.
For enabling sap* user, follow <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/3a/4a0640d7b28f5ce10000000a155106/frameset.htm">Enabling SAP* user</a>
Pradeep -
Not able to login with operator(user id) in datamover
After db setup and running tools rel and other scripts i am trying to login to data mover using PS/PS or any other op id...I am getting
"Invalid user and password logon denied" error...
Ran grant and checked config manager also but of no use does any one have idea??
I am using
Oracle 11g
Peopletools 8.53
HCM FP2
RHEL 6 64bit
Thanks in advance!!!I have set app profile unlocked but havent set a global password just gave connect id and password as people/peop1e and app serv id and password as PS/PS and for Web as PTWEBSERVER/PTWEBSERVER......
My dms Looks like,
REM - hcmdm111ora.dms
REM - Created by Data Mover 8.53 Fri Feb 08 22:58:28 2013
REM -
REM - Database Platform: Oracle
REM - Unicode Database
REM - Selected Character Set: AL32UTF8 - AL32UTF8
REM - Generate Latin-1 Code
REM -
REM - PeopleSoft HR Database - US English
SET LOG E:\PT853\log\hcengs.log;
SET INPUT E:\PT853\data\hcengs.db;
SET COMMIT 30000;
SET NO VIEW;
SET NO SPACE;
SET NO TRACE;
SET UNICODE ON;
SET IGNORE_DUPS;
SET ENABLED_DATATYPE 9.1;
IMPORT *;
REM - PeopleSoft HR Database - US English
SET LOG E:\PT853\log\hcengl.log;
SET INPUT E:\PT853\data\hcengl.db;
SET COMMIT 30000;
SET NO VIEW;
SET NO SPACE;
SET NO TRACE;
SET UNICODE ON;
SET IGNORE_DUPS;
SET ENABLED_DATATYPE 9.1;
IMPORT *;
REM - Final Database cleanup
REM -
REM - Based on your inputs to Database Setup, you will be using
REM - ConnectID's to connect to your PeopleSoft Application
REM -
UPDATE PSOPRDEFN SET ACCTLOCK = 1;
INSERT INTO PS.PSDBOWNER VALUES('HCMDM111', 'SYSADM');
UPDATE PSSTATUS SET OWNERID = 'SYSADM';
UPDATE PSOPRDEFN SET SYMBOLICID = 'SYSADM1';
UPDATE PSOPRDEFN SET OPERPSWD = OPRID, ENCRYPTED = 0, ACCTLOCK = 0 WHERE OPRID NOT IN('PS','PTWEBSERVER');
UPDATE PSOPRDEFN SET OPERPSWD = 'PTWEBSERVER', ENCRYPTED = 0, ACCTLOCK = 0 WHERE OPRID = 'PTWEBSERVER';
UPDATE PSOPRDEFN SET OPERPSWD = 'PS', ENCRYPTED = 0, ACCTLOCK = 0 WHERE OPRID = 'PS';
UPDATE PSACCESSPRFL SET ACCESSID = 'SYSADM', SYMBOLICID = 'SYSADM1', ACCESSPSWD = 'SYSADM', VERSION = 0, ENCRYPTED = 0;
UPDATE PSOPTIONS SET LICENSE_CODE = '117fefffff8fffffebfb197c32sm64u', LICENSE_GROUP = '1';
UPDATE PS_INSTALLATION SET
HGA='Y', BENEFIT_ADMINISTRN='Y', PSERECRUIT='Y', CCU='Y', DI='Y', INSTALLED_GP_ARG='Y',
INSTALLED_GP_AUS='Y', INSTALLED_GP_BRA='Y', INSTALLED_GP_CHN='Y', INSTALLED_PAY_GBL='Y',
INSTALLED_GP_FRA='Y', INSTALLED_GP_DEU='Y', INSTALLED_GP_HKG='Y', INSTALLED_GP_IND='Y',
INSTALLED_GP_ITA='Y', INSTALLED_GP_JPN='Y', INSTALLED_GP_MYS='Y', INSTALLED_GP_MEX='Y',
INSTALLED_GP_NLD='Y', INSTALLED_GP_NZL='Y', INSTALLED_GP_SGP='Y', INSTALLED_GP_ESP='Y',
INSTALLED_GP_CHE='Y', INSTALLED_GP_THA='Y', INSTALLED_GP_UK='Y', INSTALLED_GP_USA='Y',
EHC='Y', HR='Y', FO_PBM='Y', INSTALLED_PAY_INT='Y', ADP='Y', INSTALLED_PAY_NA='Y',
PA='Y', RSRW='Y', ST='Y', SPN='Y', PSERECRUIT_MGR='Y', TL='Y', PSEBENEFITS='Y', PSECOMP='Y',
PSECOMP_MGR='Y', PSEA='Y', PSEPAY='Y', PSEPERF_MANAGEMENT='Y', PSEPROFILE='Y', PSEPROFILE_MGR='Y';
GRANT SELECT ON PSSTATUS TO PEOPLE;
GRANT SELECT ON PSOPRDEFN TO PEOPLE;
GRANT SELECT ON PSACCESSPRFL TO PEOPLE;
REM - ENCRYPT PASSWORD
SET LOG E:\PT853\log\encrypt.log;
ENCRYPT_PASSWORD *;
REM - CREATE TRIGGERS
SET LOG E:\PT853\log\triggers.log;
CREATE_TRIGGER *;
REM - CREATE VIEWS
SET LOG E:\PT853\log\views.log;
REPLACE_VIEW *;
REM - CREATE TEMP TABLES
SET LOG E:\PT853\log\temptbls.log;
CREATE_TEMP_TABLE *;
Edited by: ajith on Feb 9, 2013 5:47 PM
Edited by: ajith on Feb 9, 2013 5:48 PM -
Not able to login with Logon as OPS$-user to get SAPSR3's password
Dear all
my listener getting started and database also up
but gives error
Connecting as SAPSR3/<pwd>@ECC on connection 0 (nls_hdl 0)
Logon as OPS$-user to get SAPSR3's password
If can share screen shots are some link so i can go aehad
KIndly help in doing this what is the default password for SYSTEM
Regardswhat is the default password for SYSTEM
And why not change it ? What's your OS ?
See https://forums.oracle.com/thread/2551030 -
Can't login with my Apple-ID!
Hello,
i've got a problem.
By loggin in with my Apple-ID in iTunes it failes and says that i can't connect with iTunes. My internet works and my sis is able to login with here Apple-ID on the same pc...
I reinstalled iTunes, but this didn't help.
Please help me!
I hope you understand my bad english. I'm not from England and so on...Here is how I got around this iTunes bug...
What happens: You make a purchase in iTunes then listen to it, and go back to the store afterwards to make another purchase, iTunes will keep asking for your password, over and over and over and over, never stopping.
Workaround: You have to close out iTunes, open it back up, then make the purchase, it will work fine.
Maybe you are looking for
-
Is there any way to get an older app version of apple tv remote?
It's been several months since the apple tv remote app was updated to 3.0+. Once I updated, I have not been able to control my apple tv (2nd gen). I have 2 ipod touch (2nd gen as well) and neither can use the updated app to control our apple tv any m
-
EQ doesn't work properly in iTunes 7.0 or 7.01
iTunes 7 isn't always swapping the EQ presets when different songs play, but I can't figure out what the pattern is. More often than not, iTunes selects the EQ preset of the song you choose to play, and then keeps that preset for the next song, even
-
I'm getting the Error: hostPsuedoModel does not have a method 'setfocus' do we have something installed wrong. Designer version, 8.2.1.....
-
Mail trigger to person responsible
Hi Mail should trigger, two days ahead of specific actiivty earliest start date and earliest finish date Please let me know is there any standard functionality to meet this requirement without going for development Thanks & Regards Siva
-
Music not showing up on Spotlight.
Hello. So i downloaded music to my iPhone 5 64Gb running iOS 6 (via another source; NOT iTunes) and when i try to look for it on the spotlight, it will not show up. I tried resetting the phone, restoring it, re-synicning, deleting the songs and re-sy