Not able to see all the subject areas with BI Author and BI Consumer roes

Hi All,
Recently we have upgraded to OBIEE 11G and we have created new users and assigned groups in the new 11G.
Generally users sholud be able to see all the dashboards and subject areas with the default BI Author and BI Consumer roles.
But in our 11G system users cannot see all the subject areas with the above groups, only if we give the BI Administrator role the they can see all the subject areas and dashboards.
We cannot give BI Administrator role to all the users....Please advise.
Thanks
Praveen.

Hi,
Check the application roles of BI Author and BI Consumer, they must be having BI Author and Consumer Groups. Check the privileges for Users and Application roles in Catalog manager for Dashboards and Check the Permissions for Users and Application in RPD for subject areas. Make necessary changes, restart BI server and Presentation services. Now users should be able to see dashboards and subject areas,
If it helped mark Helpful/Correct
Regards,
OBD

Similar Messages

Not able to see all the subject areas with BI Author and BI Consumer roles

Hi All,
Recently we have upgraded to OBIEE 11G and we have created new users and assigned groups in the new 11G.
Generally users sholud be able to see all the dashboards and subject areas with the default BI Author and BI Consumer roles.
But in our 11G system users cannot see all the subject areas with the above groups, only if we give the BI Administrator role the they can see all the subject areas and dashboards.
We cannot give BI Administrator role to all the users....Please advise.
Thanks
Praveen.

Hi,
Check the application roles of BI Author and BI Consumer, they must be having BI Author and Consumer Groups. Check the privileges for Users and Application roles in Catalog manager for Dashboards and Check the Permissions for Users and Application in RPD for subject areas. Make necessary changes, restart BI server and Presentation services. Now users should be able to see dashboards and subject areas,
If it helped mark Helpful/Correct
Regards,
OBD

Users not able to see all the default reports in FDM under analysis

All,
Users in FDM are not able to see all the default reports which will be available under Analysis. I have checked the MenuNavigation and MenuNavigationItems under object maintainence in FDM which have "ALL" as the provisioning level. I am not sure where the issue is as the users still not able to see the reports. Please advise if there is something that can be done in workbench.
Regards

You can set security on Report folders in workbench. You would go to the report tab in workbench, and right click on a Folder (Cannot do it on the individual report, it has to be on the folder), and you can assign security levels to the report folder. There are some in here that default to the admin level but you can override it.
Regards
JTF

Not able to see all the SAP tables from CR 2008

Hi All,
1)I am not able to see all the SAP database tables(DEV server) from Database expert menu in CR 2008. Only tables those start with alphabet letters upto A & B are visible. I checked the database connection>right click>options> found no filters as well.
We are using the CR 2008 trial version with SAP ECC.
2) When i am trying with Production Server of SAP ECC, I am not able to logon to the SAP from CR 2008. It is giving error message
as : LOGON FAILED : User USER1 has no RFC AUTHORIZATION for function group SYST
Please help me to resolve these. Thanks in advance.

Thank you very much ingo.
You helped me a lot.
One more question, when I am trying for SAP database connections say for ex: 10.57.410.70, again and again some times the connection is getting saved in my connections with as new versions/variants like
10.57.410.70_1 or so. How to overcome this.
Thanks in advance ingo
Badari

Not able to see all the records thru RSA3.

Hello All,
I am checking 0VALUATION_TEXT extractor on R/3 using RSA3 Tcode.
It is showing only 3 records.
When I am loading this Text Master data through InfoPackage, the records were loaded from R/3 to PSA itself is 6.
Why I am not able to see all the records in RSA3.
Kindly Help me out in this.
Thanks,
Geetha

Hi Geetha,
Check the data, It seems loded data was 3 records for 2 languages.
In RSA3 it is showing 3 records for EN language.
Assign points if it helps...
Regards,
ARK

ARE YOU AWARE, THAT PROBABLY GOOGLE MAIL, GMAIL, HAS INTERFERED IN LIGHTBEAM'S PAGE SIZE ? I AM NOT ABLE TO SEE ALL THE GRAPH SIGN'S DOWN UNDER. CAN YOU RESET?

Are you aware that probably Google mail, has interfered in Lightbeam's page size ?
I am no longer able to see all the Graph Sign's in the centre of the page because they are now in majority, so almost completely, vertical down the horizontal line. ( although, Reset Zoom level is adjusted to 100% )
Can you reset the page size for me, and also the Graph Logo's back to the centre of the page again. Please.
At the same time:
My touch screen now, from my laptop, is extremely more Sensitive for Static load of my hands, resulting in trouble during the writing process, ... because, now the writing cursor, jumps away unexpected if my hand comes near to the Touch Screen.
It triggers my temper, ... Please, can You help me out here ???
Small history:
After I used the possibilities of blocking several Direct and In-directs followers of my personal Internet activities, it is Google Mail, who is in War with me now, and inside Gmail I am no longer able to sign out.
Because Gmail lay out is partly out of service.
Thank You all for your cooperation.
Jan Mink

It is possible to reset the zoom size.Have you tried [[Font size and zoom - increase the size of web pages|Firefox's zoom feature]]? This will help increase the size of web pages.
* To make things bigger, press '''Ctrl''' and '''&#43''' at the same time.
* To make things smaller, press '''Ctrl''' and '''-''' at the same time.
* To reset the size back to normal, press '''Ctrl''' and '''0''' at the same time.
You can also use the [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]. add-on to change the default zoom level for all websites at once. After setting your global zoom level, you can still fine-tune the zoom on individual sites.
'''Using NoSquint:'''
#After installing NoSquint, make sure you have the Add-on Bar displayed:
#*Right-click the new tab button ("+") or a blank area of the tab bar to the right of it and choose Add-on Bar from the shortcut menu.
#Click the % on the Add-on Bar to call up site preferences, then click the Global Settings button, then the Zooming tab.
#*You can experiment with sizes larger than 125%, but it's not recommended that you go higher than 150% unless you have a large high-resolution monitor.
If there are particular sites that still present a problem, feel free to post their URLs.
Please let us know if this helped you!
Thank you.

Not able to see all the application components in BI

Hello Friends,
Basically, we should be able to see all the application components(when you select 'datasources' under 'modeling' in RSA1) in bi which contain different datasources in them, example:
App components
+Financial Accounting
+Controlling
+Sales & Distri
i am not able to view any of the above App components in BI.
Could you pls help me out ...
Thanks,
Srini

Hi,
These data sources not activated in the source system in SAP and you need to go to t-code RSA5 and activate them manually after selecting them.
I think its "Activate data source" option.
Create a TR for this if asked.
once activate you need to replaicate them in BW and then you can see if they are coming or not.
Also it is possible that you are looking at the wrong source system.
in the data source option in RSA1 look for SAP option and the right client and then see if these data sources are appearing or not.
Thanks
Ajeet

I'm not able to see all the tabs words on itunes window. I think I uninstall the font on my system. How I can know wich fonts Itunes uses for install it?

I think I uninstall the font on my system. How I can know wich fonts Itunes uses for install it?
I'm using Win Vista 64b - but I try already to install all my fot library but nothing happen,, still not able to see some menu's from lists, tabs titles, etc.
I search through itune's web site and not sign of info about how can I fix this problem...
help!

It has something to do with Segoe fonts in your system.
Refer this link for solution
iTunes 10.1 Missing Text

I used to be able to see all the cookies that had been installed, and now I can't.

I am annoyed beyond belief. Why do you have to change a good thing and make it stupid????
In the privacy part of Options, I used to be able to see in a window ALL the cookies that have been installed, and I could pick and choose which ones I want to remove. I guess that was just too much control to give to us, so you had to eliminate that feature, right?
I would like to revert to a previous version of Firefox. I am sick and tired of your stupid updates that screw things up for everybody.
How can I go back to an earlier version?

* IF you are using the '''"Remember History"''' setting (as described in this article -> [[Settings for privacy, browsing history and do-not-track#w_remember-history|Remember History]]), click '''Remove Individual Cookies''' button to view all cookies
* IF you are using the '''"Use Custom Settings for History"''' setting (as described in this article -> [[Settings for privacy, browsing history and do-not-track#w_use-custom-settings-for-history|Use custom settings for history]]), click '''Show Cookies''' button to view all cookies
Check and tell if its working.

Not able to see all the users in AL08.

Hello all,
We have SAP ECC 6.0 installed on SOLARIS 10,database as oracle 9.2.0.6
We have installed and configure solaris cluster 3.2 for our production environment , one node installed with database ( db+ci ) and other node installed with application server.
In Database server t-code AL08 only shows its user only, while in application server it works fine, Al08 shows users of both the servers.
same problem with SM51, From application server we are able access database server but from database server we are not able to access application server. Access means we can check work process,user etc.. even though in SM51 both the servers active.
Chandresh Pranami.

Hi Chandresh,
see
Note 412014 - AL08 does not show all instances
Note 648255 - Incorrect number of active users with AL08
SurendraJain
Edited by: Surendrajain2003 on Jul 31, 2009 12:43 PM
Edited by: Surendrajain2003 on Jul 31, 2009 12:43 PM

Table Maintance - Not able to see all the entrie of table

Hi All,
I have created a Z table where I have mentioned 3 key fields.
MANDT      CLNT    3
ANSVH      CHAR   2
ENDDA      DATS    8
Now when I create the multiple entry using sm30 with the key field ANSVH same and different date i amnot able to see the entry in the sm30 but in table it exists.
e.g.
in table i have 2 entrries
100   A     30.03.2009
100   A     31.03.2009
but in sm 30 i am able to see only one entry
A     30.03.2009
I have generated the table Maintainnance several times but no success.
pls help.
Regards,
Umesh Chaudhari.

Hi Siddharth Chordia,
Thanks for your all effort.
but ti have checked the points mentioned by you here.
1) you might have forgotten to check key field for date field,
              All the three fields mentioned are key fields.
MANDT     MANDT     CLNT     3     0     Client                                    KEY Initial
ANSVH     ANSVH     CHAR     2     0     Work Contract                       KEY Initial
ENDDA     ENDDA     DATS     8     0     End Date                              KEY Initial
BEGDA     BEGDA     DATS     8     0     Start Date
BETRG     BETRG     CURR     9     2     Amount
PERCT     PERCT     DEC     5     2     Percentage
ZPDPF     ZPDPF     DEC     7     3     DPF Department Production Factor
2) may be the table is inactive, if so activate the table
       Table is active.
3) may be you would have made the date field as a key field after you had created the table, in this case you will have to click on utilities menu -> database utility, then click on activate and adjust database,
Even though I created all the key fields in first place it self, I tried data base utility also.
4) once you give the entries you might have forgotten to save the entries.
Entries in the table
100   A     31.03.2009 01.01.2009     5,000.00   0.12     0.123
100   A     30.06.2009 01.01.2009     5,000.00   0.12     0.230
Entries in the SM30
A     30.06.2009     01.01.2009     5,000.00     0.12     0.230
I even tried to create the new table. but the same result.
Regards,
Umesh Chaudhari

Not able to see all the records in SM30

Hi All,
I have created a Z-table. In that records are stored based on the dates.
Suppose :
The fields and their values in the table are as below,
Field1          Field2                 Field3
A             22/02/2008      31/12/9999
A             12/01/2006      21/02/2008
B             10/11/2007      31/12/9999
B             27/05/2006      09/11/2007
But in if we go in SM30 transaction, it is showing only recent records i.e.as below,
Field1          Field2                 Field3
A             22/02/2008      31/12/9999
B             10/11/2007      31/12/9999
Please tell me how can I get the full contents of the table in SM30.

Hi,
Looks like there is a date restriction for showing records where the ENDDA date is not less than SY-DATUM.
When entering SM30, select the option (radiobutton) "with restrictions"
There might be some default restriction maintained.. Check that and remove it if present.
Cheers.

FBL3N Report -not able to get all the transaction code details

Hello,
when FBL3N report ran for one the expenses account (time paid off - project charges account) , only few line items are displaying the transaction code like CJ88 and CJ8G.
can you please tell me why all the line items are not showing the transactions codes and is there any know situation when the T- codes are not displayed.
What I need to do, to get all the T- codes in the report ?
I really appreciate your help.
Regards
Radha

I know it is a line item report and I was expecting to see the transaction code details in the report for every line item. But in I'm not able to see all T- codes for all the line items
Thanks
Radha

ODBC connection not able to see all schemas

Hi everyone,
We have noticed an unusual problem that just recently started. In our database, I have created a read-only user - only has the ability to connect to the database, and SELECT ANY TABLE. Then we have some applications (Crystal Reports and Lotus Notes Agents) that use this user to query data. The applications use an ODBC connection, and when we initially set this up, everything worked beautifully.
However, suddenly we have noticed that the ODBC connection is not able to see all of the schemas in the database. We have tested and confirmed this - using either 9.02 ODBC or 10.01, this happens with both of them. I created a couple new ODBC connections, one for each version, then I try to create a new Crystal Report, using this ODBC connection - when I connect using the read-only user, it connects just fine, but when it shows me all of the schemas available, I am only seeing about half of them (and of course not seeing the one that I really need to see).
However, when I use Microsoft Access, and try to import some External Data, and I use the same ODBC connections, then I AM seeing all of the schemas.
Has anyone ever seen anything like this? Any ideas on what I can do to troubleshoot?
Thanks,
Brad

I'm trying to get this issue figured out. Can you
tell me what you mean when you ask me to log in
directly as the same user using ODBC and query
ALL_TABLES - how would I do that?Using whatever Oracle database account you use in Crystal, log in to the database using SQL*Plus (or your favorite GUI like SQL Developer) and run a query like
SELECT owner, table_name
FROM all_tablesDoes that query show all the tables you expect, or are you missing some?
Also, you mention a parameter in the ODBC API that
controls which schemas are returned - is there any
way to see that value?An ODBC trace might show the value, I don't recall if the actual value is written out in the trace. Different front-end tools often have a place that allows you to filter out certain schemas, which is generally done by passing in a parameter to this ODBC API call. I don't know enough about your tools, though, to know where this might be.
Are there any other ODBC drivers I could try?There are plenty of third party ODBC drivers out there, but I would tend to be suprised if the ODBC driver was at fault here. You could also try patching the ODBC driver and/or Oracle client to the most recent patchsets.
Justin

Not able to download all the rows to excel sheet from alv grid display

Hi experts,
I am not able to download all the rows which are displayed in alv grid display for some material numbers.
for some materials i am able to download, i used two ways to download 1) from icon(local file) on grid 2) menu list->export.
i checked in debugging till selecting the spread sheet pop up window, i am able to see all the data in internal table.
Can you suggest me what will be the problem....
thanks in advance,

hi sandeep,
sorry for didnt specify clearly.
note: EX: "asaasdada in this sentence i said " this symbol is special character not the text.
building final internal table code
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
    EXPORTING
      capid                 = p_capid
      datuv                 = sy-datum
      ehndl                 = '1'
      mktls                 = 'X'
      mehrs                 = 'X'
      mmory                 = '1'
      mtnrv                 = p_matnr
      stlal                 = '1'
      stpst                 = 0
      svwvo                 = 'X'
      werks                 = p_werks
      vrsvo                 = 'X'
    TABLES
      stb                   = i_stb
    EXCEPTIONS
      alt_not_found         = 1
      call_invalid          = 2
      material_not_found    = 3
      missing_authorization = 4
      no_bom_found          = 5
      no_plant_data         = 6
      no_suitable_bom_found = 7
      conversion_error      = 8
      OTHERS                = 9.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_stb1[] = i_stb[].
IF NOT i_stb1[] IS INITIAL.
    SORT i_stb1 BY idnrk.
    DELETE ADJACENT DUPLICATES FROM i_stb1 COMPARING idnrk.
    SELECT bmatn ematn FROM ampl INTO TABLE i_ampl
      FOR ALL ENTRIES IN i_stb1
      WHERE bmatn = i_stb1-idnrk AND
            datuv LE sy-datum AND
            datub GE sy-datum.
    SELECT
    matnr
    bwkey
    verpr
    stprs
    bwprh
    FROM mbew
    INTO TABLE i_mbew
    FOR ALL ENTRIES IN i_stb1
    WHERE
        matnr EQ i_stb1-idnrk AND
        bwkey EQ i_stb1-werks.
    IF NOT i_stb1[] IS INITIAL.
      SELECT matnr werks beskz
             dzeit webaz plifz
             ekgrp
      INTO TABLE i_marc
      FROM marc
      FOR ALL ENTRIES IN i_stb1
      WHERE matnr = i_stb1-idnrk
      AND werks = i_stb1-werks.
      SORT i_marc BY matnr werks.
    ENDIF.
    CLEAR i_ekpo.
    CLEAR i_vend.
    IF NOT i_stb1[] IS INITIAL.
      SELECT ebeln ebelp matnr werks loekz aedat
             netpr peinh
      INTO TABLE i_ekpo
      FROM ekpo
            FOR ALL ENTRIES IN i_stb1
            WHERE matnr = i_stb1-idnrk
            AND werks = i_stb1-werks.
      SORT i_ekpo BY matnr ASCENDING
                     aedat DESCENDING
                     ebeln DESCENDING
                     ebelp DESCENDING.
      IF NOT i_ekpo IS INITIAL.
        SELECT k~ebeln k~lifnr l~name1
        INTO TABLE i_vend
        FROM ekko AS k INNER JOIN lfa1 AS l
        ON k~lifnr EQ l~lifnr
        FOR ALL ENTRIES IN i_ekpo
        WHERE ebeln = i_ekpo-ebeln.
        SORT i_vend BY ebeln.
      ENDIF.
    ENDIF.
ENDIF.
i_ampl1[] = i_ampl[].
IF NOT i_ampl1[] IS INITIAL.
    SORT i_ampl1 BY ematn.
    DELETE ADJACENT DUPLICATES FROM i_ampl1 COMPARING ematn.
    SELECT matnr mfrpn mfrnr FROM mara INTO TABLE i_mara
      FOR ALL ENTRIES IN i_ampl1
       WHERE matnr = i_ampl1-ematn.
ENDIF.
SORT i_ampl BY bmatn.
IF NOT i_stb[] IS INITIAL.
    SELECT stlty stlnr stlkn stpoz idnrk potx1 potx2
    INTO TABLE i_stpo
    FROM stpo
    FOR ALL ENTRIES IN i_stb
    WHERE stlty = i_stb-stlty
      AND stlnr = i_stb-stlnr
      AND stlkn = i_stb-stlkn
      AND stpoz = i_stb-stpoz
      AND idnrk = i_stb-idnrk.
    SORT i_stpo BY stlty stlnr stlkn stpoz idnrk.
ENDIF.
LOOP AT i_stb INTO wa_stb.
    READ TABLE i_marc INTO wa_marc
    WITH KEY     matnr = wa_stb-idnrk
                 werks = wa_stb-werks
                 BINARY SEARCH.
    IF sy-subrc = 0.
      wa_outtab-beskz = wa_marc-beskz.
      wa_outtab-dzeit = wa_marc-dzeit.
      wa_outtab-webaz = wa_marc-webaz.
      wa_outtab-plifz = wa_marc-plifz.
      wa_outtab-ekgrp = wa_marc-ekgrp.
    ENDIF.
    READ TABLE i_ekpo INTO wa_ekpo
        WITH KEY matnr = wa_stb-idnrk.
    IF sy-subrc = 0.
      wa_outtab-netpr = wa_ekpo-netpr.
      wa_outtab-peinh = wa_ekpo-peinh.
      READ TABLE i_vend INTO wa_vend
      WITH KEY ebeln = wa_ekpo-ebeln
               BINARY SEARCH.
      IF sy-subrc = 0.
        wa_outtab-lifnr = wa_vend-lifnr.
        wa_outtab-name_sup = wa_vend-name1.
      ENDIF.
    ENDIF.
    READ TABLE i_stpo INTO wa_stpo
    WITH KEY stlty = wa_stb-stlty
             stlnr = wa_stb-stlnr
             stlkn = wa_stb-stlkn
             stpoz = wa_stb-stpoz
             idnrk = wa_stb-idnrk
             BINARY SEARCH.
    IF sy-subrc = 0.
      wa_outtab-potx1 = wa_stpo-potx1.
      wa_outtab-potx2 = wa_stpo-potx2.
    ENDIF.
    READ TABLE i_mbew INTO wa_mbew
    WITH KEY
    matnr = wa_stb-idnrk
    bwkey = wa_stb-werks.
    IF sy-subrc IS INITIAL.
      MOVE:
      wa_mbew-verpr TO wa_outtab-verpr,
      wa_mbew-stprs TO wa_outtab-stprs,
      wa_mbew-bwprh TO wa_outtab-bwprh.
    ENDIF.
    wa_outtab-matnr = p_matnr.
    wa_outtab-posnr = wa_stb-posnr.
    wa_outtab-stufe = wa_stb-stufe.
    wa_outtab-idnrk = wa_stb-idnrk.
    wa_outtab-ojtxb = wa_stb-ojtxp.
    wa_outtab-menge = wa_stb-menge.
    wa_outtab-meins = wa_stb-meins.
    MOVE: wa_stb-zzitem_draw_no TO wa_outtab-zzitem_draw_no.
    IF wa_stb-upskz = 'X'.
      SELECT * FROM stpu INTO TABLE i_stpu
               WHERE stlty = wa_stb-stlty AND
                      stlnr = wa_stb-stlnr AND
                      stlkn = wa_stb-stlkn AND
                      stpoz = wa_stb-stpoz.
    ENDIF.
    LOOP AT i_stpu INTO wa_stpu.
      wa_outtab-upmng = wa_stpu-upmng.
      wa_outtab-ebort = wa_stpu-ebort.
      wa_outtab-uposz = wa_stpu-uposz.
      CONCATENATE v_ebort wa_stpu-ebort      INTO v_ebort
      SEPARATED BY space.
    ENDLOOP.
    MOVE strlen( v_ebort ) TO v_len.
    MOVE: 0 TO x,
      128 TO y.
    DATA : lt_tab TYPE TABLE OF swastrtab.
    DATA : ls_tab LIKE LINE OF lt_tab.
    DATA : lv_ebort TYPE string.
    CLEAR lv_ebort. CLEAR lt_tab.
    MOVE v_ebort TO lv_ebort.
    CALL FUNCTION 'SWA_STRING_SPLIT'
      EXPORTING
        input_string                 = lv_ebort
        max_component_length         = 128
      TABLES
        string_components            = lt_tab
      EXCEPTIONS
        max_component_length_invalid = 1
        OTHERS                       = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    IF lt_tab[] IS NOT INITIAL.
      LOOP AT lt_tab INTO ls_tab.
        CLEAR lv_ebort.
        MOVE: ls_tab-str TO lv_ebort.
        CONDENSE lv_ebort.
        MOVE lv_ebort TO wa_outtab-ebort.
        APPEND wa_outtab TO i_outtab.
        CLEAR:
        wa_outtab-matnr,
        wa_outtab-posnr,
        wa_outtab-zzitem_draw_no,
        wa_outtab-ojtxb,
        wa_outtab-menge,
        wa_outtab-meins,
        wa_outtab-uposz,
        wa_outtab-upmng,
        wa_outtab-verpr,
        wa_outtab-stprs,
        wa_outtab-bwprh,
        wa_outtab-lifnr,
        wa_outtab-name_sup,
        wa_outtab-potx1,
        wa_outtab-potx2,
        wa_outtab-netpr,
        wa_outtab-peinh.
*        wa_outtab-idnrk.
      ENDLOOP.
    ELSE.
      APPEND wa_outtab TO i_outtab.
    ENDIF.
    CLEAR v_ebort.
    CLEAR: wa_stpu.
    REFRESH: i_stpu.
    LOOP AT i_ampl INTO wa_ampl WHERE bmatn = wa_stb-idnrk.
    READ TABLE i_mara INTO wa_mara WITH TABLE KEY matnr = wa_ampl-ematn.
      IF sy-subrc = 0.
        LOOP AT i_outtab INTO wa_outtab
        WHERE
        idnrk = wa_stb-idnrk AND
        flag NE 'X'.
          wa_outtab-mfrpn = wa_mara-mfrpn.
          wa_outtab-mfrnr = wa_mara-mfrnr.
          SELECT SINGLE name1 FROM lfa1 INTO wa_outtab-name1 WHERE lifnr = wa_mara-mfrnr.
          MOVE 'X' TO wa_outtab-flag.
          MODIFY i_outtab FROM wa_outtab
          TRANSPORTING mfrpn mfrnr name1 flag.
          EXIT.
        ENDLOOP.
        IF sy-subrc <> 0.
          CLEAR:
          wa_outtab-matnr,
          wa_outtab-posnr,
          wa_outtab-zzitem_draw_no,
          wa_outtab-ojtxb,
          wa_outtab-ebort,
*          wa_outtab-idnrk,
          wa_outtab-menge,
          wa_outtab-meins,
          wa_outtab-uposz,
          wa_outtab-upmng,
          wa_outtab-verpr,
          wa_outtab-stprs,
          wa_outtab-bwprh,
          wa_outtab-lifnr,
          wa_outtab-name_sup,
          wa_outtab-potx1,
          wa_outtab-potx2,
          wa_outtab-netpr,
          wa_outtab-peinh.
          wa_outtab-mfrpn = wa_mara-mfrpn.
          wa_outtab-mfrnr = wa_mara-mfrnr.
          SELECT SINGLE name1 FROM lfa1 INTO wa_outtab-name1 WHERE lifnr = wa_mara-mfrnr.
          APPEND wa_outtab TO i_outtab.
        ENDIF.
      ENDIF.
      REFRESH i_stpu.
      CLEAR i_stpu.
    ENDLOOP.    CLEAR: wa_matnr1, wa_mfrnr, wa_outtab.
ENDLOOP.
Edited by: srinivasareddy j on Mar 9, 2011 7:16 AM
Edited by: srinivasareddy j on Mar 9, 2011 7:20 AM

Not able to see all the subject areas with BI Author and BI Consumer roes

Similar Messages

Maybe you are looking for