Not able to see the Cost analysis in the Process order (T-Code COR2).

Hi SAP Guru's
Csoting in the Process order Configuration.
I have done the Config setting related to the Product Costing Controlling with regard to the
Cost Sheet, Cost Componet Structure.Overheads, asssigning the Cost elements in the Costing sheet.
assigned the same in the Process order.
And also the Costing variant options seen in OPL1 t-code can not be displayed in the Process order Csoting Variant selection.
where as the in the Costing variant for the cost component structure, i can see the Xompany code with required plant details.
looking the costing alanysis data in Process order, unable to see

Hi,
If you are looking at cost analysis. You will get this only some you do confirmations to the production or process Order.
I hope you did confirmation of material and quantities to the Process Order
Best Regards
Surya

Similar Messages

Not able to see Metadata fields when adding the fields to the rule in UCM

Not able to see Metadata fields when adding the fields to the rule even after creating them in information fields of configuration manager.It is happening for few fields only.We are using 10.1.3 version of UCM.Kindly provide a solution if any.

Dhilipan,
I am trying to setup AES at the current Customer.
You are right on LR_JP to be linked to customs code list instead of ACE and I do achieve that if I were to maintain the Custom code list by maintaining the assignment for EAR in a separate test.
I was infact trying to follow the link: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30c7015e-c191-2d10-71b9-95907dc8edd1?overridelayout=t…
On this document, if you look at page# 14 thru 17, it has the steps I described in my original note with customs code still appearing in the drop down for 'EXCPT' for EAR.
Nevertheless, I wanted to default Type = C50 when the license type for the line on the Customs declaration is 'EXCPT' but if you see the very last screen-shot below, even though the license type configuration has default value as 'C50' it did not get pulled into the line item Documents tab when I tried to pick the category as 'CUII'.
Let me know your thoughts on defaulting the data into Customs declaration for AES filing.
What I want to achieve is the following:
When License type is 'EXCPT', system should default the type as 'C50'
Should put the License type 'EXCPT' into the number field
Should put the actual License# 'ENC' into the Supplement field
Should put the ECCN # '5A002' into the Details field
Thanks,
Prashant.

Not able to see plan cost for labour

Hi,
I had created an PM order (IW31) and assigned some operation to it, after saving plan cost should be available in cost tab.
But nothing is there.
but if i do the confirmation of the operation cost'll appear in actual cost.
Kindly reply with path.
Thanks
Warm regards
Rajat

Rajat,
The costing log is emptied once you leave the transaction.Please do cost determination by choosing the same in the application toolbar of the header screen.After this check the costing log Goto > Logs > cost determination.That might give you a clue.
If this still doesn't resolve the issue, make sure that the following has been maintained for the wrk center . "Other formulae" for capacity category "002" as SAP008. "Other formula" for scheduling as SAP004. Check the version assigned to plan cost in the valuation variant assigned to the costing variant using transaction OKP8.Double click on the valuation variant and choose the Activity type /process subtab.Generally this version is set to 0.If its set otherwise check to make sure that "plan cost" has been selected for the version and also whether cost has been maintained in KP26 for this version and cost center /activity type combination.
Regards
Narasimhan

Not able to see any firewire units on the bus overview.

I just bought my second Mini, it had been used by the outlet during a promotion campaign, so I had to restore the OS.
Everything looked fine, but there are two problems I am left with:
Firstly, the FireWire 800 interface seems almost dead. By that I mean, there is power on the bus, but no communication. On the FireWire info page I only get a warning in red letters saying "Warning: Could not list FireWire units". Of course, it does not matter what I connect.
The other issue I experience is that after booting the Mini, it takes 10 to 15 minutes before I am able to have response on keyboard and mouse input.
Any suggestions out there what could be the matter?

Thanx kbrosnan. Enter key will work if my keyboard is Google Keyboard but if i have another keyboard type (C-DAC, GIST Marathi Keyboard) then if I press enter key it will take special invisible character may be carriage return and not getting expected action. Using same C-DAC keyboard I am able to get expected action in another application. So is that browser problem of keyboard problem?
Ref C-DAC Keyboard: http://cdac.in/english/down/gist/android_soft_keyboard_marathi.aspx

Why am I not able to see a home page for the itunes store?

When I click on the itunes store to purchase songs...nothing shows up but a page to download a new software. It will not let me leave the page as well. I would like to purchase songs. What should I do?

Thanks for your response. I hadn't mentioned I was using a B9180 icc profice and since the 9180 can print up to 13x19 inches you'd think there'd be an option to do so, so I'll recheck it. Thanks again.

Hi. My name is Mandy. I am not able to see my purchased movies in the I tunes libary.

Anybody here to help?

iTunes...quick links( on the right)>Purchased>Movies...are they listed here? Is a cloud icon shown? If so, that means you have to download them to see them in your library.

I am not able to see the sent emails in the sent items folder. I am using Apple mail. Does anyone have any solutions?

I can't see the latest emails I sent in the sent items in Apple mail. Also, I am not able to see my old emails in the inbos folder. Can someone please help me out with this?

Hello Vidish,
You may need to indicate to the Mail app which folder should be used for sent messages. This can be done by selecting your 'Sent' mailbox, and choosing (from the 'Mailbox' menu) Use This Mailbox For -> Sent.
Mail (Mountain Lion): If messages aren’t stored where expected on the mail server
http://support.apple.com/kb/PH11810
Cheers,
Allen

Not able to see requisition line in the PO after autocreation

Hello Friends,
When i am autocreating a purchase requisition onto a purchase order , i am not able to see that line.Though in the header it reflects the line amount but i am not able to see the line.
What could be the problem?
Thanks for all help.
Regards,
Amit

Your problem is not clear.
Which line do you not see? The PO Line or the Req line?
Have you tried saving and requerying the PO? Does the PO line show up?
Sandeep Gandhi

File Monitoring - Not able to see File Path on the Detail Information Tab

Hi Experts:
I am setting up the "File Monitoring" in the Solution Manager. I am having STA/PI01L_CRM570 on the Solution Manager.
And on the Satelite System - ECC I have STA/PI 01L_ECC600
While I am setting up the parameters, I am supposed to provide the file path in "Detail Information" tab page.
But I am just able to see two tabs:
Count and Short Text (optional).
I checked all the other tab but not able to locate where I need to provide the file path.
Can any one let me know, If I am missing anything or do I need to do any further steps.
Similarly for the File Size setting:
I am not able to see where I can define The parameter "File Pattern (e.g. *.log, *.txt or any string)" is mandatory.
Pls let me know.
Regards
John

Hello Johns,
You can find the FilePath in the 'Detail Information' tab if you double click the initial and predefined counter 001.
Best regards,
Goncalo Mouro Vaz

My firefox webpage now opens up as a whole page and I am not able to see any any menu bars

All of a sudden my firefox webpage now opens in the whole window and I am not able to see any menu bars in the top or the "start" icon in the bottom of the screen

Toggle Full Screen mode on/off with F11 -- very useful keyboard shortcut.
References:
* http://dmcritchie.mvps.org/firefox/keyboard.htm
* http://kb.mozillazine.org/Resizing_oversize_window
* http://kb.mozillazine.org/Resizing_oversize_window
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

Not Able to see SAP systems in List of Available SAP Systems for Crystal R

Hi All,
We have installed Crystal reports 2008 and SAP integration KIt client software on my machine. I am trying to create Crystal reports based on the BI query and I could see SAP Connections in the 'Create new connections list' but not able to see any SAP systems in the list of 'Available SAP Systems'.
How to Add SAP systems to this list.
Thanks,
Chindam Praveen Kumar.

1. Define an environment variable (user or system) with the name SAPLOGON_INI_FILE . This variable should contain the path to your saplogon.ini file including the file name eg. if the saplogon.ini resides in the folder c:\windows the variable should contain the following value c:\windows\saplogon.ini
2. Open your saplogon.ini file using Notepad and go to File->Save as. Choose All Files in the field Save as type and DO NOT change the name of the file. In the field Encoding make sure that UTF-8 is selected.
ingo

Not able to see any Query Parameters in Siebel Application

We are unable to see any query parameters once we reach Siebel Application i.e if we access Call Center Application, we do not see any additional data in URL after callcenter_enu/start.swe this happens wven when we add/edit records in Call Center Application.

Yup, its on. I have tried wifi on n off. Even tried Network reset and restart nothing works. Not able to see any wifi names in the list.

Users not able to see all the default reports in FDM under analysis

All,
Users in FDM are not able to see all the default reports which will be available under Analysis. I have checked the MenuNavigation and MenuNavigationItems under object maintainence in FDM which have "ALL" as the provisioning level. I am not sure where the issue is as the users still not able to see the reports. Please advise if there is something that can be done in workbench.
Regards

You can set security on Report folders in workbench. You would go to the report tab in workbench, and right click on a Folder (Cannot do it on the individual report, it has to be on the folder), and you can assign security levels to the report folder. There are some in here that default to the admin level but you can override it.
Regards
JTF

Not able to see the data in the report

Hi All
      In my cube i am having data.But when i am running the report ,i am not able to see the data.
    The error its throwing is -No Applicable data found.
    what could be the problem,please provide me the idea to solve the problem.
Thanks&regards
syam prasad dasari

HI,
See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
Thanks

Not able to see data in the qualifier table of the main tbl , Data Manager

Hi,
I have an issue of not able to see the data of two qualified table after populating them.
It is in mdm-5.5 ps4.
When populating data first time ,it shows up in those two table slots in the right side of the Data Manager.
However subsequently it does not show up in those slots , only by right click on the table and selecting "View/edit", the window pops up where those data shows up.
However unlike other qualified tables the data does not showup automatically for these two tables.
Appreciate any suggestion or feedback on this.
regards,
-reo

You may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
You use the Filter Checkbox to limit the qualified table records by the current search selections.
Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
Message was edited by:
Adhappan Thiagarajan

Not able to see the Cost analysis in the Process order (T-Code COR2).

Similar Messages

Maybe you are looking for