Not able to send mail to SAP Inbox(SBWP)

When i create a new message in SBWP and send it to SAP Inbox, It is moving to outbox. When I resubmit this mail , then it move to SAP Inbox. Please Help me to solve this problem.

Hi,
When i create a new message in SBWP and send it to SAP Inbox, It is moving to outbox.
When ever you send a new message (mail) from the SAP Inbox, Outbox will have a copy, Like sent items in the Outlook.
When I resubmit this mail , then it move to SAP Inbox. Please Help me to solve this problem. code}
When creating a new message, If you give the correct User Id in the recipient it will go correctly. Click Refresh in the SAP Inbox and check it.
Regards,
Surjith

Similar Messages

Notification mailer is not able to send mails to Outside domain i.e gmail

Hi All,
We are in 12.1.3 EBS application with 11.1.0.7 DB on Aix 64 bit platform:
resently we configured notification mailer with out any issues
But the issue is notifications are delivered to with in the domain itself but not to outside the domain i.e gmail and yahoo
SMTP server host name is owa.craftsmanautomation.com the same we used to configure the Notification mailer
Even we verified from os level using telnet utility as follows:
$ telnet owa.craftsmanautomation.com 25
Trying...
Connected to 192.168.5.8.
Escape character is '^]'.
220 Capl-cas01.CRAFTSMAN.LOCAL Microsoft ESMTP MAIL Service ready at Thu, 12 Jul 2012 14:03:47 +0530
EHLO CAPL-PROD
250-Capl-cas01.CRAFTSMAN.LOCAL Hello [192.168.5.12]
250-SIZE
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-STARTTLS
250-X-ANONYMOUSTLS
250-AUTH NTLM
250-X-EXPS GSSAPI NTLM
250-8BITMIME
250-BINARYMIME
250-CHUNKING
250-XEXCH50
250-XRDST
250 XSHADOW
MAIL FROM: [email protected]
250 2.1.0 Sender OK
RCPT TO: [email protected]
250 2.1.5 Recipient OK
DATA
354 Start mail input; end with <CRLF>.<CRLF>
Subject: Test message
Test message body
250 2.6.0 <[email protected]> [InternalId=85753] Queued mail for delivery
quit
221 2.0.0 Service closing transmission channel
Connection closed.
In the above command in place of FROM and TO mail-id's if we use any personal mail-id's getting error message as "Unable to Relay".Please suggest is there any changes we need to done at SMTP server Level or OS level or Application Level.
Thanks in Advance

925263 wrote:
Hi Hussein,
Thanks Alot for your reply.
Currently we changed the SMTP Server(mail.craftsmanautomation.com).we used anoth SMTP server to configure Notification Mailer.Because previous one(owa.craftsmanautomation.com) is not able to send mail's to outside domains.
But in this case we got the below error message while testing.Below error message we captured from the output file of the script Oracle Workflow ATG Support: R12 Java Mailer Setup Diagnostic Test.
ERROR
[Nov 10, 2012 1:32:45 PM GMT+05:30]:1352534565017:-1:-1:capl-prod.craftsmanautomation.com:192.168.5.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[outboundThreadGroup1,5,outboundThreadGroup]:192.168.5.13:84096:1352529863628:11:ERROR:[SVC-GSM-WFMLRSVC-110812-10006 : oracle.apps.fnd.wf.mailer.SMTPOutboundProcessor.send(Message)]:Problem encountered when sending to {[[WFTEST <[email protected]>]]} -> javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
class javax.mail.SendFailedException: 554 5.7.1 <[email protected]>: Sender address rejected: Access denied
Please see these docs.
Email Not Received javax.mail.SendFailedException: Invalid Addresses [ID 876835.1]
Workflow Notification Mailer Unable to Send E-Mail Notifications [ID 374804.1]
Unable to Email Proposal Documents to an 'External Address' [ID 1126223.1]
How to address Email Center: Outbox Processor Error: Invalid Addresses [ID 1399427.1]
Thanks,
Hussein

I am using i pad mini. I am going through a issue in which i am not able to send mails to my work email add wherein i am able to receive emails from same email id.

i am using i pad mini. I am going through a issue in which i am not able to send mails to my work email add wherein i am able to receive emails from same email id.

With one mailbox server in the production site and one in the DR site, you do not have high availability. If the main site goes down, the cluster loses quorum and all databases dismount. You must then force quorum or move the file share
witness to restore quorum.
I can't tell you why what you observed happened. At the time of the problem I would have been looking at the transport queues to see what's queued and to where.
I recommend you look at the configuration of your send connectors to ensure that none of them are dependent upon the DR site server.
To send mail outside, you must allow relay. To do this, I recommend you create a new receive connector that's configured to allow relay and restrict access to the application server to keep anyone else from using it to relay. There are plenty
of articles on the Internet that describe how to configure a relay connector.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

I am not able to send mail - my outbox just spins

I am not able to send mail from my ipod touch. the message just keeps spinning and not sending

- Does Safari work?
- Try a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Can you receive mail from that account?
- Can you send mail with other accounts?
- Try deleting the account for the iPod and reenter all the settings.

I am not able to send mails through Yahoo APP.It gives me an error msg :"the sender address has ben rejected by the server ".I tried adding username and password in the SMTP server settings,But those optiopns are greyed out.

I am not able to send mails through Yahoo APP. It gives me an error msg :"the sender address has ben rejected by the server ".
I tried adding username and password in the SMTP server settings,But those optiopns are greyed out.
So, i am not able to enter anything in fields under SMTP server settings

You probably have changing settings disabled in Restrictions.

I have an iphone 4s. able to receive all the incoming mails but not able to send mails through this iphone 4s. please help.

I have an iphone 4s. able to receive all the incoming mails but not able to send mails through this iphone 4s. please help.

delete and reinstall the email account.

Small issue in sending mail to sap-inbox via classes

Hi All,
I am working in sending SAP mail to sap-inbox via classes..
Which i am able to work out..But got some minor struck off where when i am sending the mail from sap-report
it is sucesfully reaching the user ....
Issue is In the sap-inbox mail it is not only showing the
Created: Sender user name
it is also showing the Changed :Sender name only
How to restrict the changed should not display ...
Waiting for your response....
*Creates persistent send request
TRY.
      L_SEND_REQUEST = CL_BCS=>CREATE_PERSISTENT( ).
* Creating Document
      L_DOCUMENT_SAS = CL_DOCUMENT_BCS=>CREATE_DOCUMENT(
                                    I_TYPE = 'HTM'
                                    I_TEXT = I_CONTENT[]
                                    I_SUBJECT = 'Automated HRIS (SAP) Report' ).
*PERFORM PREPARE_ATTACHMENT.
* Adding Attachment
      CALL METHOD L_DOCUMENT_SAS->ADD_ATTACHMENT
        EXPORTING
          I_ATTACHMENT_TYPE    = C_EXT
*          I_ATTACHMENT_SIZE    = L_SIZE
          I_ATTACHMENT_SUBJECT = 'Hr Details r.xls'
          I_ATT_CONTENT_HEX    = L_XML_TABLE. "i_attach.
*          I_ATT_CONTENT_TEXT   = l_XML_TABLE.
Sas
Edited by: saslove sap on Oct 22, 2009 7:05 AM
Edited by: saslove sap on Oct 22, 2009 7:07 AM

contd...
* document to send request
      CALL METHOD L_SEND_REQUEST->SET_DOCUMENT( L_DOCUMENT_SAS ).
      DATA:LR_SENDER TYPE REF TO IF_SENDER_BCS,
           LR_SEND TYPE REF TO CL_BCS.
* Preparing the sender object
*      LR_SENDER = CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS( sy-uname ).
      DATA: L1_UNAME TYPE SY-UNAME.
      L1_UNAME = SY-UNAME.
      LR_SENDER = CL_SAPUSER_BCS=>CREATE( L1_UNAME ).
* Setting the sender
      CALL METHOD L_SEND_REQUEST->SET_SENDER
        EXPORTING
          I_SENDER = LR_SENDER.
* E-Mail
      LOOP AT P_EADDR.
        TRANSLATE P_EADDR-LOW TO UPPER CASE.
        L_RECIPIENT = CL_SAPUSER_BCS=>( P_EADDR-LOW ).
        CALL METHOD L_SEND_REQUEST->ADD_RECIPIENT
          EXPORTING
            I_RECIPIENT = L_RECIPIENT
            I_EXPRESS    = 'X'
            I_COPY       = ' '
            I_BLIND_COPY = ' '
            I_NO_FORWARD = ' '.
        IF SY-SUBRC EQ 0.
          WRITE:/'** SUCCESS: Email Sent to', P_EADDR-LOW COLOR COL_NORMAL.
        ELSE.
          WRITE:/'** ERROR: Failed to send Email to',P_EADDR-LOW COLOR COL_NEGATIVE .
        ENDIF.
      ENDLOOP.
*Trigger E-Mail immediately
      L_SEND_REQUEST->SET_SEND_IMMEDIATELY( ' ' ).
      CALL METHOD L_SEND_REQUEST->SEND( ).
      COMMIT WORK.
    CATCH CX_DOCUMENT_BCS INTO L_BCS_EXCEPTION.
    CATCH CX_SEND_REQ_BCS INTO L_SEND_EXCEPTION.
    CATCH CX_ADDRESS_BCS INTO L_ADDR_EXCEPTION.
ENDTRY.
Edited by: saslove sap on Oct 22, 2009 9:02 AM

Sending mails from SAP inbox to Outlook

Hi,
I am able to send mails to the SAP user's inbox in the SAP workplace thru my abap program but i would like send it to their outlook mail box. I'm able to get mails if i configure outlook to receive emails from SAP mail box but i would like to do it vice versa. I got the user's SMTP address.how do i do it? Is there any configurations are necessary or anything to do with my exchange server? give me some valid sugesstions.

Hi,
Check this link
http://www.sapdevelopment.co.uk/reporting/email/email_sapmail.htm
http://www.sapdevelopment.co.uk/reporting/email/emailhome.htm
Thanks & Regards,
Judith.

Sending mail from sap Inbox to outlook

Hi All,
Iam new to SAP workflow. Here I need to send the mail from SAP Inbox to Outlook for high priority keeping red flag as icon.
can anyone tell me how to set up this and go ahead to start.
Thanks
Kumar

IF I understand you correctly, you want to send a mail to Outlook (external email address) as a step in Workflow.
If you are on Release 6.20 or above the following solution will work. I do not remember what is available in earlier releases.
1) Define a multiline element based on SOXNA-FULLNAME to hold the email addresses. How you populate this element with the addresses depends on your requirements.
2) Insert a Send Mail step in the workflow.
3) In the Mail Tab, Select 'U' as Recipient Type.
Assign the Multi Line element defined in Step 1 to E-Mail Address.
4) Define the Subject and the body as needed.
Please note that you should have External mail sending from SAP enabled and a batch job that runs periodically to push the mail.
Cheers,
Ramki Maley.

Sending mail to SAP Inbox thru actions

Hi Friends,
I am having a requirement as below:
Need to send one mail to SAP Inbox to the BP in one specific partner functions in an activity based upon the below conditions:
1) Status of the transaction is open
2) The Todays' Date -Created date =45
I believe this can be done using actions. Please let me know if this is possible. If yes let me know the simplest way and if know let me know the alternative way.
Thanks,
Jai

hi
yes you can do this using actions
just create your action profiel and there you give processing type as smartforms
and then select your parameters\
there are some standard actions available in the system for that you can refer to them
then you inside the conditions give your conditions
attach your action profile to your transaction and then you have what u wanted
alternate way to achieve this is using FMs or workflows
best regards
ashish

Not Able to Send Mail in Oracle Apex

Hello Apex Experts,
I am using Amazon Cloud with details as using Oracle Apex 4.1 and Oracle 11g as database using Glass Fish Server.
Problem am facing is E-Mail are not working. I tried adding our company smtp address but still it is not working.
In Oracle Apex Admin scree Under Manage Instance --> Instance Settings --> Email tryed adding ( localhost and 10.1.1.100 SMT address ) this didnt work
I am using below code to send mail
Begin
-- Send plain text email
APEX_MAIL.SEND(
    P_TO       => '[email protected]',
    P_FROM     => '[email protected]',
    P_CC       => '[email protected]',
    P_BCC      => '[email protected]',
    P_SUBJ     => 'test',
    P_BODY     => 'test');
   apex_mail.push_queue('10.1.1.100', 25);
End;
SELECT * FROM APEX_MAIL_QUEUE;
I get ORA-24247: network access denied by access control list (ACL) . I also see last_updated as SYS in the log
Please suggest me how to fix this issue.
Thanks
Sudhir

Hi Mike,
Thanks for your reply, Let me give you a detail on where we are stuck on send mail.
   We have a Schema called PORTAL
We are able to send mail from UTL_SMTP as mentioned below in a procedure
create or replace PROCEDURE send_mail (p_to        IN VARCHAR2,
                                       p_from      IN VARCHAR2,
                                       p_message   IN VARCHAR2,
                                       p_smtp_host IN VARCHAR2,
                                       p_smtp_port IN NUMBER DEFAULT 25)
AS
l_mail_conn   UTL_SMTP.connection;
BEGIN
l_mail_conn := UTL_SMTP.open_connection(p_smtp_host, p_smtp_port);
UTL_SMTP.helo(l_mail_conn, p_smtp_host);
UTL_SMTP.mail(l_mail_conn, p_from);
UTL_SMTP.rcpt(l_mail_conn, p_to);
UTL_SMTP.data(l_mail_conn, p_message || UTL_TCP.crlf || UTL_TCP.crlf);
UTL_SMTP.quit(l_mail_conn);
END;
Begin
send_mail('[email protected]','[email protected]','test','10.0.0.100','25');
End;
The above code works i am able to send and receive mails.
We also create ACL as mentioned below
begin
dbms_network_acl_admin.create_acl (
acl => 'http_permission.xml', -- or any other name
description => 'HTTP Access',
principal => 'APEX_040100', -- the user name trying to access the network resource
is_grant => TRUE,
privilege => 'connect',
start_date => null,
end_date => null
end;
commit;
SELECT * FROM dba_network_acl_privileges where principal='APEX_040100';
begin
DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE(acl => 'http_permission.xml',
principal => 'APEX_040100',
is_grant => true,
privilege => 'connect');
end;
commit;
begin
DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE(acl => 'http_permission.xml',
principal => 'APEX_040100',
is_grant => true,
privilege => 'resolve');
end;
commit;
BEGIN
dbms_network_acl_admin.assign_acl (
acl => 'http_permission.xml',
host => '10.1.1.100', /*can be computer name or IP , wildcards are accepted as well for example - '*.us.oracle.com'*/
lower_port => 80,
upper_port => 80
END;
But still we are getting same ACL Error Please suggest US
ORA-24247: network access denied by access control list (ACL)
Thanks
Sudhir

Others not able to send mail to my account

I have manually entered all the information as my hosting website has provided and I am able to send mail but others are not able to sen mail to me.
The following message occurs every attempt to send to my account:
Delivery to the following recipient failed permanently:
[email protected]
Technical details of permanent failure:
Google tried to deliver your message, but it was rejected by the server for the recipient domain microciderco.com.au by aspmx.l.google.com. [2607:f8b0:400d:c00::1a].
The error that the other server returned was:
550-5.1.1 The email account that you tried to reach does not exist. Please try
550-5.1.1 double-checking the recipient's email address for typos or
550-5.1.1 unnecessary spaces. Learn more at
550 5.1.1 http://support.google.com/mail/bin/answer.py?answer=6596 i68si5152525qgd.15 - gsmtp

Well the domain passes most standard checks. http://www.dnsstuff.com/tools#dnsReport|type=domain&&value=microciderco.com.au
Google, whom I assume are your hosts are emphatic when I send mail to that address that the address simply does not exist. So I think you need to revisit that part of your domain setup. perhaps create a couple of other addresses and see if they play nice.

Issue in sending mail to SAP Inbox from Workflow

Hi All,
I need to send the mail to the creator of the document about the user decision. If i am executing the workflow through the event ( ouput type) , the workflow processing in SWIA is complete but the mail is not sent in the SAP Inbox. But If i try to manually execute the workflow, mail is sent to the SAP Inbox.
I've used WF_INITIAITOR in the Expression. I need to send the mail not to the approver but to the creator of the workflow.
Thanks,
Neha

Hi,
the event is also triggered from my Id but in that case I do not recieve any e-mail. None of the users recieve the e-mail in the SAP Inbox for the mail step after the decision.
In workflow Log the last step shows the details as
name of the manager and the workflow background for mail sent step as shown below
Sumit Vij     Background work item created     10.01.2012     12:08:43
Sumit Vij     Execution started automatically     10.01.2012     12:08:43
Workflow Hintergrund     Work item processing complete     10.01.2012     12:08:44
Thanks

Alv result send mail to sap inbox internally

Hi,
How to send a e-mail alv results to the sap inbox internally. Please povide me meterial or suggest me, if anybody have an idea about this requirement. It is my short time requirement. Please help me.
Thanks.
Regards,
prasad.

hi,
Thank you for ur reply.
Now I am able to send email from local sap to sap inbox with an attachement as excel sheet, but the all the records would be having in the first row only.
actually, I need to get each record in separate row , how to get it. please help me.
really thank you very much for ur help.
prasad.

Not able to send mail after Embarq took over Sprint

After over three hours on the phone with Embarq, I finally am able to receive mail but not send. They claim it is a problem with Apple Mail. I never had this proble untill the change over from Sprint to Emgarq. This is the message I receive when I try to send mail;
"This message could not be delivered and will remain in your Outbox until it can be delivered.
Verify that you have addressed this message correctly. Check your SMTP server settings in Mail Preferences and verify any advanced settings with your system administrator."
I am seriously thinking about dumping Embarq and going with cable.
Any suggestions?
David

Hi Thanks for the tips with the Embarq trouble. Just to pass on a word of success on the proper setting with these guys. The Incoming Mail Server: pop.embarqmail.com The User Name will be your email address, don't drop the @embarqmail.com it won't work without it. Enter your password for the incoming server. The outgoing will be smtp.embarqmail.com:email address. It kind of looks goofy but it just like the incoming, but swap the pop for SMTP. My server port is still set at 25 and you'll need to add the password here as well. I sent a test email yesterday. I could view it on the webmail, but had no success on Mail 2.1, until today. Thanks for the info being posted. This is not a typical setup for an account on Mail. They kept on telling me the user name was everything before the @ when in fact it's your whole email address.
Hope this helps.

Not able to send mail to SAP Inbox(SBWP)

Similar Messages

Maybe you are looking for