Not able to view the fields ....made through enhancement 0002--

Dear Freinds,
            I have made enhancment for infotype's 0002 and  0023 . However when i am looking through PA30 for a personnel number iam not able to view the fields created in 0002 infotype , however iam able to view the fields created in infotype 0023 . Is there is a any setting's i have to make so that i can view these fields created in infotype 0002 also ??
please let me know .
regards
vamsi.

Dear Deepak
            yes this is enhancement to 0002 and 0023 ... i have to add one field for the
0002 ..........as ihave to add chinese name for my requirement ..................
and i have done some new fields for 0023. if can give me your personnel id i can
send the screen shots ........
i want to tell one thing.........   i have created for 0002 by adding new  the new field (chinese name) .. it created a z program.ZP000200(Module pool)  with the below
includes
INCLUDE ZP000210.
INCLUDE MPPDAT00.
INCLUDE FP50PPSB.
INCLUDE MPPERS00.
INCLUDE ZP000220.
INCLUDE ZP000230.
INCLUDE ZP000240.
and when i went to the screen  0200 i have found the field which i have added
P0002-ZZCHNAM  type char 20 . and i executed from here itself (by clicking F8).
and iam able to see the field which i have added
under additional fields...........but the same if i go in PA30 and create .........for an employee (molga = 27)... i dont find the field which i created...... i have done this
change for the country 27 only.
regards
vamsi
regards

Similar Messages

  • Not able to view the content in Microsoft help viewer (MS VS 2012)

    Hello Team,
    I'm Rahul from Daimler-Chrysler, Bangalore location. I’m the IT Engineer for Daimler-Chrysler.
    We tried many settings in IE but still not able to resolved. So i need more expert help. 
    My customer having one issue- 
    # User is not able to view the content in Microsoft help viewer (MS VS 2012), below is the error: Its opening in HTML Format.
    So please help me. Contact no- +91-9972004298. and personal id:- [email protected]/[email protected]
    I call you to Microsoft customer care they advice me to ASK Question. Please help me, I'm waiting for your reply.
    Thanks,
    Rahul B. Patil.
    +919972004298.

    Hi Sri,
    it looks that your HANA instance has been created before we enabled the web-based development workbench. Some privileges are missing, we can't migration those existing instances.
    Nevertheless you can ignore the error above. You can see all the content inside your instance "smstest1".
    If you want to get rid of the cosmetic issue. You might delete this instance and create a new one.
    Best regards
    Xu

  • Need help with imovie photos extension. I am not able to view the editing tools no matter what I do!!!! Help please ASAP

    I Have read a lot of tutorials or whatever but Im not able to view the editing tools from imovie in the photos app. I have tried the trimmer thing and the yellow outline does appear but the only options available are "play, trim or cancel". I really really want to use the filters and stuff so please help me if you can!
    Thanks!

    Well, everything that you have bought with her Apple ID prior to getting your own Apple ID is forever hers. Apple will not transfer content from one ID to another. But in the case of the Mac, contact iTunes Customer Service and request that they send your issue to the Account Security Team and ask that the Mac be released form your mother's account so you may register it with your account. Then you can accept the iLife apps into your account for any future updates.
    iTunes Support -
    http://www.apple.com/support/itunes/

  • I just bought a new printer for my iMac version 10.7 but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!!

    I just bought a new printer for my iMac version 10.7 Lion but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!! It as if the printer does not show up in the add printer section under system prefernces!!

    I checked the manufacturer and apple site to see if my printer is supprted and it said it was!! I am using the HP officedeskjet 4500 G510a-f (HP Officejet 4500 Desktop)!! Still does not show up under add printers please help!!

  • Not able to download the field names in GUI_DOWNLOAD(very urgent)

    Hi All,
    I am downloading the file contents to the presentation server.i am able to get the file contents proeprly but not able to download the field names into text file.
    Can anybody please help me in this issue..? its very urgent. Valuable answers will be rewarded.
    CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          filename                = w_filename
          filetype                = 'DAT'
         write_field_seperator   = c_x
          col_select              = c_x
          COL_SELECT_MASK         = t_mask
        TABLES
          data_tab                = t_tab
          fieldnames              = t_colnames
        EXCEPTIONS
    Thanks & Regards,
    Satish.

    Hi,
    I have tried in both ways its not working.
    while a ran the program it is going to the dump.
    I am working in mySAP ECC6.0
    Can pl you suggest other way..
    Thanks & Regards,
    Satish.

  • Not able to view the webhelp output in Robohelp 9

    Hello,
    I am in a project where we have to create webhelp output from Robohelp 9. Whenever I generate the webhelp ouput I am not able to view the the contents. Although, the webhelp is opening in a browser window but there are no topics present in the contents. The other ouputs like .chm and .dox are fine, but there is some problem with the webhelp which I am unable to figure out.
    Regards,
    Ruso

    What browser are you using?
    If Chrome, try something else. Chrome works fine with help on the server but not locally. There is more in Snippets on my site about the Chrome issue.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Not able to view the graphical elements in APD

    Hi Experts,
    Not able to view the graphical elements for all applications such as:
    Nodes
    Data flow arrows
    in my APD workarea.
    I have all the authorization for APD according to the SAP  OSS  Note 919614.

    Hi Experts,
    Any input on this?
    Regards,
    Meiyappan.

  • Not able to view the journal options in HFM

    Hi Experts
    1. Journal posted but am not able to view the journal option in the left handside. What would be the reason?
    regards
    Smilee

    Hi,
    Can you check once access rights of your login credentials.
    Regards,
    Sasi

  • I am not able to view the default view of FF 4.0, It is showing menu bar with the windows border. When i turn off menu bar, the strip which should be present above the tabs goes missing.

    I have recently downloaded FF 4.0 and using a lot of add-ons. I am not able to view the default view of FF 4.0 with no menu bar. Even after turning off the menu bar from customization, I am able to see only the tabs and FF button, but not the strip over the tabs.

    When you hide the menu bar to display the Firefox button, the titlebar (strip above the tabs) is only displayed if the Firefox window is not maximized. If you always want the Window titlebar, you can use the Firefox 4 UI Fixer extension - https://addons.mozilla.org/firefox/addon/firefox-4-ui-fixer

  • Not able to view the window when I run cim.bat file

    I have installed ATG web Commerce 10.0.3 and I need to configure MySql. For that I need to Start CIM by running the following file: <ATGdir>\home\bin\cim.bat and later I have to Type P to choose the products to configure, at a minimum ATG Platform and ATG Content Administration. But when I am not able to view the window to proceed further when I run thecim.bat file.Please let me know if anyone has any idea about this.

    Hi,
    Please find the error log while running in the command prompt.
    C:\Documents and Settings\******>c:\ATG\ATG10.0.3\home\bin\cim.bat
    Exception in thread "main" java.lang.UnsupportedClassVersionError: Bad version n
    umber in .class file
    at java.lang.ClassLoader.defineClass1(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12
    4)
    at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
    at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    at atg.core.util.BeanUtils.instantiate(BeanUtils.java:427)
    at atg.core.util.BeanUtils.getBeanInfo(BeanUtils.java:395)
    at atg.nucleus.SimpleComponentState.getComponentClassDescriptor(SimpleCo
    mponentState.java:547)
    at atg.nucleus.SimpleComponentState.<init>(SimpleComponentState.java:91)
    at atg.nucleus.SimpleConfigurationState.<init>(SimpleConfigurationState.
    java:93)
    at atg.nucleus.PropertyConfiguration.configureService(PropertyConfigurat
    ion.java:756)
    at atg.nucleus.Nucleus.<init>(Nucleus.java:832)
    at atg.nucleus.Nucleus.<init>(Nucleus.java:717)
    at atg.nucleus.Nucleus.startNucleusCheckLicense(Nucleus.java:4144)
    at atg.nucleus.Nucleus.startNucleus(Nucleus.java:4021)
    at atg.cim.SessionContext.startNucleus(SessionContext.java:632)
    at atg.cim.SessionContext.startNucleus(SessionContext.java:610)
    at atg.cim.flow.CimFlowCreator.startDefaultCimFlow(CimFlowCreator.java:7
    4)
    at atg.cim.Launcher.startCimFlow(Launcher.java:168)
    at atg.cim.Launcher.main(Launcher.java:68)

  • Not able to view the 'proxy-to-remote' iView under 'user admin' role

    Hi All,
    I am not able to view the 'proxy-to-remote' iView under 'user admin' role. I need this for Remote role assignment for FBN .
    I am using the portal version EP 7.0.
    Can anybody help me .
    Thanks & Regards,
    Amit Kade

    Hi, Amit
    u have to assign the one iview in User-Admin role
      Goto->Contentadmin-> portal content->content provded by sap->Admin interface->iview template ->select proxy to remote role iview.
    and this iview assign to user admin role the u can able to see.
    if its solve please give me 10 points
    thanks & regards
    chitta

  • Not able to view the WEBINAR presentations

    Hi,
    I'm not able to view the e-learning presentations@ https://www.sdn.sap.com/irj/scn/xi-elearning.
    Only links that ends with WEBINAR replay or presentation are not able to viewed.
    I have  installed webEX player, still I'm not able to read the links.
    could anyone help on this issue.
    Thanks,
    Gupta.

    Hi Gupta,
    I have checked the same link, and clicked on first link
    Business Level Modeling for Business Process Experts  and I am able to view the e-class session. Just check you have allowed Pop-up. As the webinar reply is opening in a new Pop-up window.
    Else, Post you question in [Suggestion and Comments|SCN Support; forum.
    Sachin

  • Portal Desktop & Display Rules - Not able to see the changes made.

    Hi All,
    I had created a new theme for the portal. I had also created the rule for the new desktop with the IF & THEN condition.
    IF user = KT1137
    THEN portal desktop = pcd....(full path)
    after that, when I am logging into the portal with the above given id, I am not able to view the changes.
    what could be the possible reason? Thanks.
    Regards
    Chander Kararia

    Hi,
    Make sure that there are no
    if *
    then
    conditions above your if condition.
    so that, your rule should look like this:
    if user=your user
    then desktop=your desktop
    if user=*
    then desktop=...;
    Regards,
    Srinivas

  • While creating project from inactive dc not able to view the project struct

    Dear All,
    I have created project from inactive dc now when I open the project in the webdynpro explorer I am not able to view the application, component and models.  I have tried reloading and repairing but still the structure is not appearing.  Can anyone tell what I may be doing wrong.
    Thankyou
    Regards,
    Ganesh

    Dear Bala,
    I have got about 8 to 10 DC's out of which only this one is showing the missing structure and as this dc is being used by other dc's I am getting the error like missing component.  Previously we were using the client desktop and doin the work now we have shifted it to our individual systems.  Now any project I am creating whether from same track or different same problem comming the structure is missing.
    Regards,
    Ganesh
    Edited by: Ganesh Sawant on Sep 8, 2009 9:42 AM

  • Not able to view the previlages of the user in XIR3.1

    Hi,
    We have migrated from XI R2 to BOE xi 3.1 with SP3 in Unix.I am not able to view the previlages for the user in XI 3.1which it is there in XIR2.
    Please provide the solution.
    Thanks,
    ReksRon

    Hi,
    1. I have installed BOE XI 3.1 with SP3 in solaris and BOE XI 3.1 with SP3 having customized installation with Xcelsius server  in      Linux enironment.
    2. Added the xcelsius server in solaris which is the distributed environment.
    3.I have migrated users,groups,folders,reports,universe,profiles from XIR2 to BOXI 3.1. which is in Solaris environment by using Import wizard.
    4. When I logged into the infoview in BOE XI 3.1 as a user.I am not able to see the folders.But which I could able to view those public folders in XIR2.
    Please let me help out.
    Thanks,
    ReksRon

Maybe you are looking for