Not All Fields are Displayed in RSA3 for a Generic Extractor ??

Hi all,
 I have a created a Generic Extarctor based on a View and enhanced the Extract Structure with 3 ZZ Fields. Now it has 26 fields with width of 273. In RSA3, I could see inly 12 fields with width of 147 only.
 No field has checked as HIDE in DataSource.
 I have checked Settings --> Layout --> Current, there are NO columns in Hidden Fields box which is on right side. All fields are there in left side box under Line 1.
 I could see all the fields in ROOSFIELD table for this DataSource.
When I copy it into Spreadsheet from RSA3, I could see all the fields with data including ZZ fields (Appended Fields).
 What is the problem and how could I fix it, PLEASE ?
 Thanks in advance.
Regards,
Venkat,
Message was edited by:
 Venkat Kodi

Hi Venkat
sorry for late response.
Anyway did you solve your issue.
Forget about the icon now and check again in ROOSFIELD table and check if the missing field for selection has any parameter value. If so (shoudl be a P value ) then maintain it and put a blank value save the changes.
this should solve your issue.
hope this could help you
regards
Boujema

Similar Messages

Not all users are displayed for log on after a reboot or startup...

Problem summary: Not all users are displayed for log on after a reboot or startup...
This problem only occurs after a fresh start-up or restart. The only users displayed are the initial (admin user) and "Guest". Two other (non-admin) users are not shown for log on.
To work around this problem and get them to log on we have to log on as the admin user, then we can see the other users in the Fast User Switching menu (top right-hand corner of the screen), listed under the current logged on user. After selecting the non-admin user we can log in and use the laptop as normal.
If we lock the screen, use fast user switching or log out all users; all users are available for log in, until a reboot is done; at which point the non-admin users disappear again and we have to log in as the admin user and use fast user switching again.
The laptops are both brand new MacBook Airs. The initial configuration of Mac OS X Yosemite was done using the Apple ID of the purchaser (parent) and then the OS was patched, immediately, through the App store (no further updates available as of the date of this posting). After this Family Sharing was activated and new users set up for the two children who will be using these laptops.
Has anybody else experienced this problem with Yosemite?
Cheers,
David.

David,
Users not enabled for FileVault unlock are only able to log into the computer after an unlock-enabled user has started or unlocked the drive. Once unlocked, the drive remains unlocked and available to all users, until the computer is restarted.
FileVault has to be On.
To Enable the users to be able to unlock FileVault Go to:
System Preferences > Security & Privacy > FileVault ( Tab ) > Click the Lock in the bottom left > Put in your administrator password > Should see an option to Enable Users > Enable User.
Hope that helps,
Weston
Supporting Articles,
OS X: About FileVault 2 - Apple Support

Loop at screen - not all fields are available

Hi all,
I want to set some fields on the screen invisible.
When I do the loop at screen in PBO not all fields from the screen are available.
Just four fields are available. In the screen there are about 20 fields.
I try to use the chain. field xyz. endchain... But it was not the problem.
Any ideas?
regards

Try this ,May be Help ful
{ SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(10) FOR FIELD r_cars.
PARAMETERS : r_cars RADIOBUTTON GROUP rgb USER-COMMAND usd .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_toyota .
PARAMETERS : r_toyota RADIOBUTTON GROUP rgb1 DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_ford .
PARAMETERS : r_ford RADIOBUTTON GROUP rgb1 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(10) FOR FIELD r_bus .
PARAMETERS : r_bus RADIOBUTTON GROUP rgb DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_volvo .
PARAMETERS : r_volvo RADIOBUTTON GROUP rgb2 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_merced .
PARAMETERS : r_merced RADIOBUTTON GROUP rgb2 DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
AT SELECTION-SCREEN OUTPUT. " AT SELECTION-SCREEN OUTPUT
IF r_cars = 'X'.                                 " If R_CURS radiobutton is selected
    LOOP AT SCREEN .                       " Looping at screen
      IF screen-name CS 'R_VOLVO' OR
         screen-name CS 'R_MERCED'.
        screen-active = 0.                     " Hiding the R_VOLVO and R_MERCED
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN .
      IF screen-name CS 'R_TOYOTA' OR
         screen-name CS 'R_FORD'.
        screen-active = 0.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF. }

Issue with DEBMAS IDoc,not all fields are reflected in the IDoc Seg E1KNB1M

For IDoc type DEBMAS, there is a segment E1KNB1M. This segment is relate to the customer correspondence details (XD02 -> company code data -> Correspondence).
For any change to the customer master a DEBMAS IDoc is triggered which has data in segments including the E1KNB1M.
In my case for few customers, the not all fields in the segment E1KNB1M contain data. Few fields contain data but the rest are filled with u2018\u2019. This is happening only in the production system, for the same customer in the quality system the data is there as required.
I checked in debugging, and found that the data is correctly passed to the segment in program SAPLVV01 Include LVV01F01. And the segment contains data till the IDoc is triggered. I.e. the fields are not getting cleared at any point.
Can anyone suggest what is happening and how to fix this? Please note that the issue is only in the production system and not in the quality system ( for the same customer).

BTT... Need some help on the above

Not all fields are getting updated in transformation

Dear all,
Please help me in the following issue:
I have the following scenario:
DSO1 and CUBE1. From DSO1 to CUBE1 I have transformation. Fields are mapped one to one.
Some of the fields are getting updated in transformation (22 fields) and some of them are not updated in transformation. (2 - storage location and steel grade).
The fields exist in DSO 1 but don't go into cube.
I did the following:
1. deleted transformation and dtp, recreate = > not working
2. copied the cube, and create new transformation and DTP...not working.
Any help would be appreciated
Thank you
Ramona

Hi Ramona,
Storage location (standard infoobject 0STOR_LOC) has plant as compunding object, check whether this is the issue ? (may be check with Steel grade infoobject also).
Else, do some RSRV checks on the DSO and Infoobject, if it doesn't bring up any issue, raise a message with SAP.
Check your BW Support Pack level , is it the latest ? Give more details about the scenario ?
Cheers,
CK

Problem with Change Document FM - Not all fields are tracked in CDPOS

Hello everybody,
Using transaction SCDO and following necessary steps described in forum, I have created a change document ZFBR to track changes of a table ZFBR. The problem is, the generated FM ZFBR_WRITE_DOCUMENT does not track changes of some fields of the table (inserts are always ok, problem is with updates). After some debugging I realized that the FM DDIF_NAMETAB_GET was returning the table DFIES_TAB where the LOGFLAG was empty for some fields (which are not tracked) so that changes of these fields were not visible in table CDPOS. However, fields with LOGFLAG = 'X' are tracked succesfully (changes are visible in table CDPOS).
I did not specify any fields to be get logged or not during the steps in SCDO (can we do such a specification anywhere?), does anyone know why the field LOGFLAG has the value '' (space)?
Best regards;
Ozcan.

Hi again,
The problem has been solved.
The data elements used in a table are the reason for the problem I have described above. When displaying the details of a data element, under tab "Further Characteristics" , the "Change Document" checkbox has to be selected to enable change document tracking. I have copied the problematic data elements with Z prefix and made the necessary enabling. I have replaced the data elements with their Z equivalents.
Best regards.
Ozcan.

Not all rows are displayed in OBIEE answers

Hi,
When I include a dimension column(PRODUCT) along with my fact column(SALES AMT), I am getting only one PRODUCT row displayed.
If I select just the PRODUCT column without any FACT column, I am getting the list of all PRODUCT(25 rows).
I used the query generated by OBIEE, and ran it in my database and I am getting all product listing and the sales amount. (25 rows).
I am assuming my problem is in my RPD. But where in my RPD should I look to debug this issue?
Thank you.
Edited by: ssk1974 on Jan 11, 2011 1:09 PM

This is probably correct behavior - you probably only have one product existing in your fact table? If you want to see all the lists of products along with $0 for the facts, you'd have to do an outer join between the dimension and the fact.
Of course, if your fact table does have other products in, then there's some other problem - maybe dim joined to fact on wrong column name or something.
Hope this helps,
Scott

Not all things are loading in Safari (for me)

Ok, well I frequently check my friends myspace's and blogs. And they usually are updated aout every other day with comments and/or new pictures/new things they talk about. So on myspace one of my friends adds new things to it about every day. So I constently check hers. But in the past two weeks a while side of her myspace was not visable to me. So I went in FireFox to see if it was just like that or if it was with Safari. I logged in and went to her myspace. Both sides of information and everything were they. I quit Safari and tried again. Still nothing. But one day I went and checked on Safari and there it was. I left her a comment and when I went back I couldn't see that one side.
Now, I could just use FireFox for myspace, but not a lot of the symbols and stuff [for example hearts] show up.
So, is there a downloadable program or an add-on that may fix this. Like maybe a FireFox tab (because I know on Windows FireFox there is an Internet Explorer tab that lets you work in FireFox, but if something doesn't load, you go to that tab and you can view everything perfectly).
Thanks for the help!
P.S. Are there any add-ons for Safari, if so where would you get them?

Nothing is loading in Safari for me since I installed the update this weekend. Firefox and Opera work just fine.
I was on the phone with Apple for over an hour today and could not get it fixed. They were completely perplexed.
They need to get this solved, and for now, they seem to ignore the issue on their own support site. Clearly, lots of us are having problems.
Wish i had never installed that update. Apple's loss is Firefox's gain, I suppose.

Not all Amounts are displayed in the Query

I have an issue with my query, I am getting '*' for some of the amounts and for the other amounts it is displaying the correct value.
Can you please help me out with this issue.

This link should give you more information...
Currency Conversions

All fields are not mapped in transformation 0IC_C03 to 2LIS_03_BF_TR

I have replicated BI7 data sources of 2lis_03_BF,BX & UM from ECC. All the infosources are BI7 infosources.After installing the BI Content for 0IC_C03, infosource 2LIS_03_BF_TR is not active.When I am trying to activate the transformation it is showing a error in START ROUTINE & also all fields are not mapped.
Please suggest a solution.
Thanx in advance.
Edited by: Aritra on Nov 28, 2011 11:37 AM

Hi,
i think you have done some modification manually(either added something and deleted something in transformation) thats why code isn't maching with standard sorce package.
so to resolve this error just remove changes you manually did. or remove that code and again create start routine and paste the code which u need.
Thanks & Regards,
NIKHIL

IPad pixels are not all working so display is multicoloured any ideas

iPad pixels are not all working so display is multicoloured any ideas.

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

In material master not all fields show the description of their value

Gurus -
Certain fields in the material master show their description text along.
Example -
Base Unit of Measure - EA      each
The description Text 'Each' which represent 'EA' comes from text Table T006A-MSEHT
Not all fields in material master show the description of what they represent. (only appear on F4 popup)
I want this description to come up for MARA-MAGRV field.
I want the configured value description for this field to appear on the screen.
I have 3 values put in this MARA-MAGRV
Z001 - description text 1
Z002 - description text 2
Z003 - description text 3
in MM01/MM02/MM03 only Z001 is see, not it description.
Here is what i tried
Added TVEGRT-BEZEI (desc field) in Transaction OMSR and assigned selection group 103 which holds MARA-MAGRV field too
any config missing?? what say?
Advises appreciated!
Thanks

You have to find out the conversion routine for domain MAGRV and enter in the convers. routine field.
if did not find one than you have create custom (take ABAPer help)
go to SE11 adn enter the domain MAGRV and hit display
on the definition tab you will see the conversion routine
here you need to populate the appo. conversion routine to see the text on the materia screen.
Conversion takes place when converting the contents of a screen field
from display format to SAP-internal format and vice versa and when
outputting with the ABAP statement WRITE, depending on the data type of
the field.
If standard conversion is not suitable, it can be overridden by
specifying a conversion routine in the underlying domain.
A conversion routine is identified by its five-place name and is stored
as a group of two function modules. The function modules have a fixed
naming convention. The following function modules are assigned to
conversion routine xxxxx:
o CONVERSION_EXIT_xxxxx_INPUT
o CONVERSION_EXIT_xxxxx_OUTPUT
The INPUT module performs the conversion from display format to internal
format. The OUTPUT module performs the conversion from internal format to
display format.
If a screen field refers to a domain with a conversion routine, this
conversion routine is executed automatically each time an entry is made
in this screen field or when values are displayed with this screen field.

Regarding iTunes U courses, would I be able to link to books/sites (like say an amazon hardback book or link to a kindle book they can purchase and download). Considering that not all books are available on iBooks I'm hoping this is allowed.   Also the p

Regarding iTunes U courses, would I be able to link to books/sites (like say an amazon hardback book or link to a kindle book they can purchase and download). Considering that not all books are available on iBooks I'm hoping this is allowed.   Also the possibility on monetizing since amazon gives commission for linking.
This question is for both the uncredited (private) courses and the bigger accredited accounts.    I am a developer trying to learn how to help my area schools and also have some ideas for my own courses.    Obviously keeping within the iTunes U app would be preferred in most cases (to the learning experience) since they can take notes and see them within the app itself.
If the reply comes from a non-apple employee please let me know (or better yet, link to) where that is clarified.   I would hate to develop something just to later find out it is against the apple iTunes U agreement.

Fair question
And, to be even more fair, I have to tell you that I get that every single day. And it's getting worse (or better, depending on how you look at it).
I always try to let people know it's a long way until you get to a confortable point, a point where you can create something. And that's exactly what I am trying to do, or at least asking how/if I should do it. And then I let them know where to start. That's what I want.
Thanks.

When I back up my Mac Book Pro to an external hard drive not all files are backed up. Can anyone help please?

When I try to back up my Mac Book Pro to an external hard drive some of the files are backed up but not all files are backed up. I don't understand. Can anyone help please?

I've used time machine in the past and couldn't get to the bottom of the problem so I've recently downloaded and am using carbon copy cloner and I get the same problem. The files that are missing are just word and number documents. Seems so odd.
Thanks for replying
John

Home sharing iMac and MacBook Pro: not all songs are playable

Hello
I set up Home Sharing between my iMac and MacBook Pro so that I could stream the music that's on the iMac to the MacBook Pro. On the MBP there are no songs, all of them are in Apple Lossless format on my iMac. I first tried to use "‘share my library on my local network" but because I wanted the play count to go up as well I chose for "Home Sharing". Setting up was simple. After all preferences were adjusted, I opened iTunes on the MBP and it immediately found the shared iMac library. There's now only one problem: not all songs are playable. Some don't even start. How is this possible and what do I need to do to resolve this?
FYI: the iMac is connected via ethernet to my cable modem which sends a wireless Wi-Fi signal to the MBP. Signal quality is excellent.
Also, is it possible that playcount is only available with Home Sharing and not with "share my library on my local network"?
Thanks!

It very well could be the antivirus app, most are intrusive and debilitate rather than enhance performance and should be removed using the developers instructions. You haven't really told us anything useful such as any settting you may have changed. However if you began working backwards resetting any changes and uninstalling the apps added since the performance issue started then you probably will find your issue.

Not All Fields are Displayed in RSA3 for a Generic Extractor ??

Similar Messages

Maybe you are looking for