Not all form's fields not saving

I have created a form from a blank PDF sheet.
I have saved the form and enabled usage rights for Adobe reader.
When I open the form in reader, it indicates I can save the form. If I fill in the form, and save it, it seems to work as intended. When I re-open the file, only 20% of the fields appear. I cannot see the previous data, even if I select the field.
If I save the form in as a text file all of the entered data is saved properly.
Basically the form is not saving ALL of the entered data.
What might be the problem?
Below is a link to the pdf I created:
https://www.dropbox.com/s/49rrmtvl1ltv5lg/License%20Information%20test.pdf

There are unnamed text fields in your table. This is the reason when you re-open the form, no data is remerged back in, because there is no field name to match with. Column cells under the headers,
Power Output:, ERP:, Antenna Height (Meters):, and Emission Designator(s):
all suffer from this problem.
The fix would be to give these table cells names.

Similar Messages

I just want to send one form from numbers not all forms.

I just want to send one form from numbers not all forms.

I'm sorry, but I don't want to give you bad advice at this point. I don't use Numbers and I would not know how to extract a sheet from the file - which it sounds like you need to do - based on my very, very limited experience with spreadsheet files.
Maybe this would be of some help to you.
http://help.apple.com/numbers/ipad/1.7/
Lets just keep the discussion alive and hopefull someone else will pop in with an idea.
You should probably post your question in here as well. You would probably get more help since this is the iWorks for iOS forum.
https://discussions.apple.com/community/app_store/iwork_for_ios

Every time I launch Firefox it pops up an error stating "Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem."

Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.
The statement above is in the pop up error box every time, when I launch Firefox. If I click ok in the box Firefox then opens. How do I fix this initializing/launch problem?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")<br />

Firefox/3.6.10 shows message whenever I click on an icon needing Internet access, saying 'Firefox couldn't install this item because "install rdf" (provided by the item) is not well-formed or does not exist' and advising me to contact the author - ???

Whenever access to the Internet is needed, clicking on any icon or link (including the Firefox icon) results in a delay of around 20 secs., followed by the appearance of the error message, headed "Malformed File". The message reads 'Firefox couldn't install this item because "install rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.'
Clicking OK or closing the box leads to a further delay of about 20 secs. after which the required action takes place! Of course, it could be said that it's really only a delay, so I should just get used to it, but it's still a malfunction, it's a pain in the neck or another region, and I really would like to cure it. Any suggestions - please????

https://support.mozilla.com/en-US/questions/756907

Note 916654 - LM13: Verification field not cleared after [Enter] key

Hi Experts,
I'm facing the issue as stated in the OSS note 916654 - LM13: Verification field not cleared after [Enter] key. My current system is ECC, that is why the OSS is already applied to the ECC version. But the problem is, i still faced the problem stated in the OSS.
Symptom
In customizing:
- You have defined [ENTER] in destination screen 302 to SAVE items.
- You want to verify the destination bin information.
You use 'Confirm Transfer Order Clustered' RF transaction LM13.
You scan several SUs and press enter.
You press [F4-Next pushbutton] to confirm the associated TO(s).
In the destination screen 302, you scan the verification value for the first item and press [ENTER] key.
==> The item is confirmed correctly but when the system proposes the next item, the verification value of the first item is displayed.
Anyone know how to fix this issue? Pls help.
thanks
Hooi Fung

Thanks a lot for your prompt answer. Well yes if i clear in the PBO the value gets cleared, but then i wanted to get the next records value into the value field, well the problem got solved in a much easier way i put everything into one chain endchain statement.

Help I need help. i get this message'Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.' How do i fix this?

Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.
Well that is the message i get. I can still use firefox(version3.6.8)

You get that error if an extension is using an old and no longer supported method to install a plugin.
Which plugin are you trying to install?
See also http://kb.mozillazine.org/Unable_to_install_themes_or_extensions

Adobe form - Text field not getting saved.

Hi All,
We created an application in which user will enter the data and submit it . The details entered in the screen will be saved in the Ztable.
Our problem is when the user enters the data in the TextField UI of the adobe form it is not getting saved in the table. In development its working fine.
In production for few users it is getting saved and for few users it is not getting saved.
We are not able to find out the root cause of the problem.
Any help will be appreciated
Best Wishes
Idhaya R

Hi Idhaya,
As you said it is working for few users,
Then you need to check Adobe reader installed for users who are having problem.
Hope it helps.
Regards,
Arun

Web Forms Number Field - Not processing decimals!

We have created a monster web form on a clients site. As it is, we have had to setup an API to deal with the data after its been generated by BC and modify it before sending it on to the client. The client saw no reason for fields that did not have anything entered against them to be sent through in the workflow notification - and I agreed.
Now after all these other problems have been resolved, I discover that all my "number" fields cannot process a decimal place, and they round up or down. BC have suggested I need to recreate the form and just make them all 'text strings'.
Not good enough. Its an EPIC form with over 100 fields in it. We, in good faith, read the instructions that can be found here: http://kb.worldsecuresystems.com/478/bc_478.html?bc-partner
that state "Number - a text box that must have a number entered into it". No note about NOT using decimals!
The confusing thing is, it lets you enter the decimal from the front end, even displays the web form confirmation page correctly with decimals. But when it creates a case in BC, it rounds the numbers. So its only at this late testing stage that we have discovered the issue
Does anyone have any ideas about faster ways of re-creating this entire form ?
I did submit a support ticket, and was told to switch to the old UI and then just change the type of the fields. But when we try to change a form field from 'number' to 'string' it brings up the message "WARNING: Field updated successfully but type not changed as field has associated values.". Then they said to:
Copy that specific webform change the type fields of the form and then remove the old webform and re-name this one copy with the first webform name. The copy option is available under the link I have provided to you.
However this still means we need to change *all* the fields and then get every field' s ID and insert it into the javascript. Very very time consuming
So A) everyone else be warned and B) Does anyone have a shortcut?
Thanks!!

Thanks for confirming my fears
Its a shame that since its such a long standing thing, it hasnt actually been added to the knowledgebase... which when we started this project (long before this schmozzle of a new system was introduced) was the most relevant place to look. When I start something, I tend to look in the KB.... not think "oh perhaps I should check the FAQ's in case there is a long standing issue that isnt contained in the KB".

I updated to iOS 5 and not all my ringtones are not there and I can not add anyone to my contacts

I updated to the new operating system and now not all of my ring tones are on my phone and I can not edit or add anything or anyone to my contacts unless they are my favorites. Please help.

Connect via cable to the computer that you use for sync. From iTunes, select the iPod and then select the Summary tab. Follow directions for Restore and be sure to say "no" to creating a backup. (You don't want to overwrite the backup file with blank data.) You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPod. This time, say "yes."

Want to develop form with field not in Database table.

Hi.
I am developing one form for leave request.
Now i have created two tables..
1. Employee detail
2.Leave detail
Now i am creating form based on leave detail right now.
This table is taking reference of Employee Detail table as reference table.(employee no is foreign key in Leave detail table).
Now in form based on Leave detail table,i have taken employee name as combo field,now when i select any employee name,based on employee name other realated detail from employee detail table also i can populate in form based on Leave detail table.
Is it possible.?As i am not able to add any field or button other than which is already there in table(Leave Detail table)
I hope i have clearly mentioned my requirement,
Need help.
Thank you.

You can in fact add another field which is not connected to any column to in the Leave table. Give it any name. Make sure that the checkboxes "updatable" and "insertable" are NOT checked, otherwise the form will try and include it in its SQL statements to update/insert data.
You then have to use the "Additional PL/SQL" tab - "before form is displayed" section on the form to fill in the value of the field. Use code like
p_session.set_value(
p_block_name => 'DEFAULT',
p_attribute_name => 'A_<your field name>',
p_value => <your value>);
p_session.save_session;
where
- p_session is available in most custom PL/SQL blocks - It refers to a portal stored session that is used to store all the internal variables.
- block_name is either DEFAULT for simple forms or MASTER or DETAIL for master/detail forms
- p_attribute_name is the name of the field you want to set BUT (very important) prefixed with A_
- p_value is the actual value - here you will use your pl/sql variable.

Fetching Form Data... does not return form's field list to edit

I have a Portal Form based on a view. It works fine if I run it.
Suddenly I am unable to edit the form field properties:
1) In the application list, I do not get run option for the form.
2) If I go to manage and edit, "Fetching Form Data..." does not return the list of fields, so I am unable to change field properties.
3) I can still run the form.
Please help, I need to fix this within hours.
Thanks in advance.

I think I know what causes the error. Whenever I use HTML tags inside the Display Options/label text box I get this error.
I have tried <p align="right">xyz</p> and <h4 align="right">xyz</h4>. In both cases I can run the form the first time and the label appears right justified, but when you try to edit the form, bottom left shows "error on page" and field data does not show up.
To fix this I had to go to the version before I added the HTML tags to the label.
Thank you for your help.

Adobe Interactive Form text field not editable

Hello,
I created an Adobe Form using transaction SFP and placed a textfield on the body page.
I then created a Web Dynpro application using SE80, placed Interactive Form container on the view. I also checked the flag 'Enabled' and provided the templateSource as my Adobe Form name.
When I test the WD application, the text field is not editable.
Can you please advise what needs to be done?
Thanks
Sagar

Hi...
Place the following code in domodifyview
data:
lr_interactive_form type ref to cl_wd_interactive_form,
lr_method_handler type ref to if_wd_iactive_form_method_hndl.
check first_time = abap_true.
lr_interactive_form ?= view->get_element( 'INTERACTIVE_FORM' ).
lr_method_handler ?= lr_interactive_form->_method_handler.
lr_method_handler->set_legacy_editing_enabled( abap_true ).
Thanks
Gopal.

I just purchased a new iMac, and not all Youtube videos are not loading

some of them say "Video not Available".... i have an older PowerPc G5 hooked up next to this new one, and it plays the same youtube videos perfectly

Did you install the adobe flash player plugin? Download it only from the adobe flash player plugin download page. Mount the downloaded dmg and launch the installer. Check the agree to terms to enable the install button and then click the install button.
Once installed, the next launch of your browser should allow you to play youtube videos and flash videos on other flash video sites.

LM13: Verification field not cleared after [Enter] key

Hi Experts,
I'm facing the issue as stated in the OSS note 916654 - LM13: Verification field not cleared after [Enter] key. My current system is ECC, that is why the OSS is already applied to the ECC version. But the problem is, i still faced the problem stated in the OSS.
Symptom
In customizing:
- You have defined [ENTER] in destination screen 302 to SAVE items.
- You want to verify the destination bin information.
You use 'Confirm Transfer Order Clustered' RF transaction LM13.
You scan several SUs and press enter.
You press [F4-Next pushbutton] to confirm the associated TO(s).
In the destination screen 302, you scan the verification value for the first item and press [ENTER] key.
==> The item is confirmed correctly but when the system proposes the next item, the verification value of the first item is displayed.
Anyone know how to fix this issue? Pls help.
thanks
Hooi Fung

Hi,
For example itab-matnr is your screen field
in PAI
field: itab-matnr,
module check_matnr_0700.
module check_matnr_0700 input.
move itab_matnr to v_matnr.
endmodule.
in PBO.
move v_matnr to itab-matnr.
a®

Nikon 800e Creative Suite 6 design standard getting raw error on some raw files not all

I have the stand alone version of Creative Suite 6. I am getting an error on some of my raw file not all of them "Could not complete your request because an unexpected end-of-file was encountered." I have researched this endless hours but cannot find any help. When I go to update in photoshop it tells me that my raw files are up to date. Any one know what to do.
I have a Dell, 64 bit operating system, Windows 7 Professional,

I do format in the camera each time after downloading the files with the reader installed in my computer. This last download nef file 15 gave me that error but nef file 17 would open just fine no problem. When I contacted the camera store today about this on going problem I told them that I had gotten a new card for the camera but the problem is still there. They wanted to know if the file would open in Nikon Capture but I don't have that installed on my computer. I did put Nikon ViewNX2 on and the file would open and I have a different image viewer that will show me raw files and it opens there but not in photoshop. He thought it might be a software problem.

Not all form's fields not saving

Similar Messages

Maybe you are looking for