Not all things are loading in Safari (for me)

Ok, well I frequently check my friends myspace's and blogs. And they usually are updated aout every other day with comments and/or new pictures/new things they talk about. So on myspace one of my friends adds new things to it about every day. So I constently check hers. But in the past two weeks a while side of her myspace was not visable to me. So I went in FireFox to see if it was just like that or if it was with Safari. I logged in and went to her myspace. Both sides of information and everything were they. I quit Safari and tried again. Still nothing. But one day I went and checked on Safari and there it was. I left her a comment and when I went back I couldn't see that one side.
Now, I could just use FireFox for myspace, but not a lot of the symbols and stuff [for example hearts] show up.
So, is there a downloadable program or an add-on that may fix this. Like maybe a FireFox tab (because I know on Windows FireFox there is an Internet Explorer tab that lets you work in FireFox, but if something doesn't load, you go to that tab and you can view everything perfectly).
Thanks for the help!
P.S. Are there any add-ons for Safari, if so where would you get them?

Nothing is loading in Safari for me since I installed the update this weekend. Firefox and Opera work just fine.
I was on the phone with Apple for over an hour today and could not get it fixed. They were completely perplexed.
They need to get this solved, and for now, they seem to ignore the issue on their own support site. Clearly, lots of us are having problems.
Wish i had never installed that update. Apple's loss is Firefox's gain, I suppose.

Similar Messages

Trying to add album from iphoto into idvd slideshow. Not all photos are loading. Message "creating thumbnail images...(31 remaining). Been there a long time. What is wrong?

trying to add album from iphoto into idvd slideshow. Not all photos are loading. Message "creating thumbnail images...(31 remaining). Been there a long time. What is wrong?

Open your iPhoto Library, go to that particular album and verify that you can view the full sized version of each image by double clicking on them. Report back with the results.
OT

Not All Fields are Displayed in RSA3 for a Generic Extractor ??

Hi all,
 I have a created a Generic Extarctor based on a View and enhanced the Extract Structure with 3 ZZ Fields. Now it has 26 fields with width of 273. In RSA3, I could see inly 12 fields with width of 147 only.
 No field has checked as HIDE in DataSource.
 I have checked Settings --> Layout --> Current, there are NO columns in Hidden Fields box which is on right side. All fields are there in left side box under Line 1.
 I could see all the fields in ROOSFIELD table for this DataSource.
When I copy it into Spreadsheet from RSA3, I could see all the fields with data including ZZ fields (Appended Fields).
 What is the problem and how could I fix it, PLEASE ?
 Thanks in advance.
Regards,
Venkat,
Message was edited by:
 Venkat Kodi

Hi Venkat
sorry for late response.
Anyway did you solve your issue.
Forget about the icon now and check again in ROOSFIELD table and check if the missing field for selection has any parameter value. If so (shoudl be a P value ) then maintain it and put a blank value save the changes.
this should solve your issue.
hope this could help you
regards
Boujema

Photoshop crashes under Yosemite when not all fonts are loaded.

Every time. Loading some fonts through Font book. When the resolve fonts modal appears on top of the canvas, Photoshop automatically quits.
Any ideas?

After some desperate troubleshooting, here is what I found.
If I delete the PS prefs file (cmd-opt-shift on opening Photoshop), and then opening a file, I get the resolve type via Typekit screen:
On the next screen, if I select don't resolve, the file will open fine:
But when I quit and open the file again, it auto quits. This is the screen just before it auto quits (the warning triangle is replaced with a loader animation.)
it seems that selecting 'Don't show on document open' in screen no. 2 is a temporary fix to this annoying bug.
Thanks,
Michael

Not all users are displayed for log on after a reboot or startup...

Problem summary: Not all users are displayed for log on after a reboot or startup...
This problem only occurs after a fresh start-up or restart. The only users displayed are the initial (admin user) and "Guest". Two other (non-admin) users are not shown for log on.
To work around this problem and get them to log on we have to log on as the admin user, then we can see the other users in the Fast User Switching menu (top right-hand corner of the screen), listed under the current logged on user. After selecting the non-admin user we can log in and use the laptop as normal.
If we lock the screen, use fast user switching or log out all users; all users are available for log in, until a reboot is done; at which point the non-admin users disappear again and we have to log in as the admin user and use fast user switching again.
The laptops are both brand new MacBook Airs. The initial configuration of Mac OS X Yosemite was done using the Apple ID of the purchaser (parent) and then the OS was patched, immediately, through the App store (no further updates available as of the date of this posting). After this Family Sharing was activated and new users set up for the two children who will be using these laptops.
Has anybody else experienced this problem with Yosemite?
Cheers,
David.

David,
Users not enabled for FileVault unlock are only able to log into the computer after an unlock-enabled user has started or unlocked the drive. Once unlocked, the drive remains unlocked and available to all users, until the computer is restarted.
FileVault has to be On.
To Enable the users to be able to unlock FileVault Go to:
System Preferences > Security & Privacy > FileVault ( Tab ) > Click the Lock in the bottom left > Put in your administrator password > Should see an option to Enable Users > Enable User.
Hope that helps,
Weston
Supporting Articles,
OS X: About FileVault 2 - Apple Support

Regarding iTunes U courses, would I be able to link to books/sites (like say an amazon hardback book or link to a kindle book they can purchase and download). Considering that not all books are available on iBooks I'm hoping this is allowed.   Also the p

Regarding iTunes U courses, would I be able to link to books/sites (like say an amazon hardback book or link to a kindle book they can purchase and download). Considering that not all books are available on iBooks I'm hoping this is allowed.   Also the possibility on monetizing since amazon gives commission for linking.
This question is for both the uncredited (private) courses and the bigger accredited accounts.    I am a developer trying to learn how to help my area schools and also have some ideas for my own courses.    Obviously keeping within the iTunes U app would be preferred in most cases (to the learning experience) since they can take notes and see them within the app itself.
If the reply comes from a non-apple employee please let me know (or better yet, link to) where that is clarified.   I would hate to develop something just to later find out it is against the apple iTunes U agreement.

Fair question
And, to be even more fair, I have to tell you that I get that every single day. And it's getting worse (or better, depending on how you look at it).
I always try to let people know it's a long way until you get to a confortable point, a point where you can create something. And that's exactly what I am trying to do, or at least asking how/if I should do it. And then I let them know where to start. That's what I want.
Thanks.

When I back up my Mac Book Pro to an external hard drive not all files are backed up. Can anyone help please?

When I try to back up my Mac Book Pro to an external hard drive some of the files are backed up but not all files are backed up. I don't understand. Can anyone help please?

I've used time machine in the past and couldn't get to the bottom of the problem so I've recently downloaded and am using carbon copy cloner and I get the same problem. The files that are missing are just word and number documents. Seems so odd.
Thanks for replying
John

Home sharing iMac and MacBook Pro: not all songs are playable

Hello
I set up Home Sharing between my iMac and MacBook Pro so that I could stream the music that's on the iMac to the MacBook Pro. On the MBP there are no songs, all of them are in Apple Lossless format on my iMac. I first tried to use "‘share my library on my local network" but because I wanted the play count to go up as well I chose for "Home Sharing". Setting up was simple. After all preferences were adjusted, I opened iTunes on the MBP and it immediately found the shared iMac library. There's now only one problem: not all songs are playable. Some don't even start. How is this possible and what do I need to do to resolve this?
FYI: the iMac is connected via ethernet to my cable modem which sends a wireless Wi-Fi signal to the MBP. Signal quality is excellent.
Also, is it possible that playcount is only available with Home Sharing and not with "share my library on my local network"?
Thanks!

It very well could be the antivirus app, most are intrusive and debilitate rather than enhance performance and should be removed using the developers instructions. You haven't really told us anything useful such as any settting you may have changed. However if you began working backwards resetting any changes and uninstalling the apps added since the performance issue started then you probably will find your issue.

Not all albums are syncing with between itunes match and iphone 5.. WHY!!!

Not all albums are syncing with between itunes match and iphone 5.. WHY!!!

First, disable iTunes Match on the iPhone. Open the Music app and let the content clear out. Now, in iTunes, disable iTunes Match while holding down the Option key (Shift for Windows). Quit iTunes, wait a few seconds, and re-open it. Turn iTM back on and let it complete it's scan. The songs that are "waiting" ought to get converted to "purchased," "uploaded" or "matched." Once the scan is complete re-enable the service on the iPhone.

My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred - any ideas?

My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred and available - any ideas?

Rodger,
Thank you for your gracious welcome . . .
and thank you for your swift response . . .
and thank you for your information (and encouragement!).
Yes, I read that too, but searched in vain for the specifity of, say, your direction:
"Go ahead and update to 8.0.2, as it contains the 8.0.1 update."
So I shall!
Again, many thanks.

BPM Monitoring: not all messages are groupped my bpm name

Could you explain me why not all messages are groupped my bpm name?
There are messages above bpm name that was sent in this bpm.
It is too diffucult to monitor messages in BPM monitoring.

Hi Denis,
Is the concerned message a synchronous message or a message that relates two integration processes? If yes, this about to be changed and will be corrected in the next SP.
Best regards
Joachim

IBooks has not been able to load or update for weeks. IPad2 Running 5.1.1

iBooks has not been able to load or update for weeks...stuck.
IPad2 Running 5.1.1

- What is the exact wording of the error message?
- What happens when yu try to update to iOS 5.1? Error messages?
- Try a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next would be to restore from backup. This will also update the iOS.
- Then restore to factory defaults/new iPod which will also update the iOS.

When converting over to HTTPS and PKI for clients, not all actions are available in configuration manager cpl

I'm not exactly sure which forum heading this should go under so if this isn't correct please let me know or move it on my behalf.
So I am trying to setup Internet Based Client Management in SCCM 2012 R2 and have come across a few articles on how to do so. I think I have mostly gotten it to work but I seem to be having a client issue when deploying new machines. My already
deployed servers seem to have picked up the PKI setting no problem. In the past when I would deploy a new windows client everything would be fine. When i converted over to PKI in my test environment I am now having issues when I go to deploy a
new windows client. I don't get all of the Actions listed in the Configuration Manager control panel. All I have are Discovery Data Collection, Machine Policy Retrieval and Eval, User Policy Retrieval and Eval, and Windows Installer Source list Update
Cycles, before all of them would populate no problem. I have let this machine sit here for several hours and nothing has changed yet. It does say PKI for client certificate. Sometimes when I would deploy new machines it would say NONE for
Client certificate. In my production environment it says self-signed. I have found if i uninstall the client and re-install the client it does populate all of the cycles but I don't understand why it is not working on deployment.
Ok so maybe not all the time that when i reinstall the client it fixes it. I just did an uninstall and reinstall on a test client and all it has under actions are machine and user policy cycles.
Does anyone have any ideas?

Hi,
I think SCCM client installed before the GPO applied, so you don't a certificate available when it is required.
You can export and import the certificate by using MDT integration, try this blog for PKI part:
How To: Build and Capture in Configuration Manager 2012 using HTTPS
And in addition, you can upload the log to your onedrive so you can share with us.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Microsoft Service Pack 2 - not all versions are equal; how to update to the latest one "safe

I posted this under another topic where it was relevant, but thought the instructions I got from Microsoft were useful (as was my experience in using them as I sent back a reply to them with the problems I encountered [none of which were particularly bad]):
One important point to note is that not all Windows XP SP2 upgrades are equal.
I had a different issue and spoke to Microsoft, who advised me to uninstall the version of SP2 I had and reinstall the newest version (the old version was about 70mb, the new one nearly 250mb).
Apparently the old SP2 had quite a few problems with it; I've found the new one to be "simply stress free" since installing...
The SP2 file name I installed (ie the newest at the time I did it) was "windowsxp-kb835935-sp2-enu".
Here's their instructions - I disagree with the way round that they suggested downloading the update (ie I would strongly advise downloading the update and having it sitting on your desktop before doing anything!!! - please see my feedback email to them that follows (you will note that I had problems connecting to the internet after uninstalling the earlier version; this, combined with the fact that I could barely read what was on the screen would have given me a major inconvenience had I not done this)!!! (and don't blame me if it goes horribly wrong - it's also worth double-checking that the version of SP2 the email links to is the most up to date. I've had a quick check myself, and it does indeed appear to still be the most up to date):
MICROSOFT'S EMAIL (make sure you also read my reply below):
MESSAGE:****************************************** ****************************This is an email from Microsoft about your support incident.When replying to this address: + It helps us if you do not include the original message + Please keep the case number (SRxxxx) in the subject lineThank youMicrosoft Product Support Services ******************* The message from Microsoft follows ****************Hi Gregory,Firstly uninstall SP2 by going to Start>Control Panel>Add/Remove Programs and then reinstall it in a clean boot.. Click Start >> Run >> In the run dialog box type msconfig and then click ok 2. Put a dot in selecti've startup 3. Uncheck all of the check boxes that become available except Process System.ini file and Load system services 4. Go to the Services tab along the top, click Hide all Microsoft Services 5. Then disable any remaining services 6. Click apply and then close 7. Finally select yes, this will start in a clean boot. 8. Then go to (http://www.microsoft.com/downloads/d...DisplayLang=en) and download and install Service Pack 29. To return your PC to normal, open the System Configuration Utility, click "Normal Startup", click OK and restart. Then restart your computer and try accessing updates againPlease let me know the results of these methods, particularly if there were any steps that you were unable to complete successfully.
MY REPLY:
HiI successfully carried out the installation on Saturday.A few minor problems ensued (the second one may have cause a novice user real problems! Certainly caused me some concern whilst working through it!). I had to reinstall ATI drivers from scratch (for Radeon 9800 Pro); this was however the only set of drivers that appeared to "detach" itself. The main problem here was that instead of using the usual standard VGA driver (which it does when I uninstall it once a month to install updated drivers), it used some other driver that made the screen very difficult to see (especially on blue backgrounds!). Running ATI's total uninstall program sorted this out however, and fortunately I had the last update package from ATI still on my system. After uninstalling and reinstalling there appeared to be no further video problems.2. After installing SP2 (and before installing above), whilst I was in the process of getting everything up and running (eg installing the security updates) the system randomly froze about 4 or 5 times; the only way to sort this out was to use the power button. I traced this problem to Windows changing my wireless networking settings so that it handled everything; I have a Netgear adaptor the software for which usually controls this (Netgear Smart Wizard). Basically the two were trying to do the same task and causing crashes; on switching Windows management off, things settled down (the Netgear driver did not need to be reinstalled).3. As a minor point, after the upgrade and installing all other updates, I noted that Microsoft Update was no longer running; I had to reinstall it from Windows Update and the messages I got whilst installing suggested that it was still partially installed but that there were problems with it. It now works.4. As a final minor point, I attach the Scan log from Registry Mechanic which I ran after everything was up and running; it fixed various problems within the registry. I note that the majority of errors are inconsequential, but note that a few do relate to the various Microsoft installs; maybe the installer program for SP2/ Media Player 0 need to sort these out in future releases? Don't think they're a real problem though!The instructions supplied worked fine; one thing I would suggest is that users are instructed to download the SP2 upgrade pack to their desktop prior to uninstalling the original SP2; I believe that my internet connection problems started after I had uninstalled the original SP2 which may have caused problems downloading the new SP2. It also ensures that the download is successful (eg if the site was down for maintenance); I was advised whilst uninstalling SP2 that about 20 programs/drivers would not work properly after the uninstall and so the immediate reinstall was vital!One thing that seemed to fix after reinstalling was a problem I was having installing Media Player 0; after installing it previously, every time I checked for updates on it the whole program would reinstall. Now however this has fixed. I will let you know if I encounter any further problems, but things all seem to be fine now, touch wood.....!
Hope this helps!Message Edited by gjc26 on 0-27-2006 02:50 AM

One small thing - I believe the reason why some of my drivers were messing up was because they were SP2 specific; the older drivers and the ones that were compatible with both SP and 2 were fine.
As soon as I did the reinstall, all of the drivers/programs that were not working, worked (aside from the ones that I mentioned in my attached email above).
So, if after uninstalling the old SP2 you are told that loads of drivers/programs will not work, fear not - most should fix themselves upon installing the new SP2.
G

Onload event after all images are loaded in an updateContent area

Hi Spry Folks!
I load a template into a page with a lot of img tags inside
it. Everything works fine.
Spry.Utils.updateContent (...HTML wit lots of img tags...)
But the loading takes a while so I would like to hide it
until all the images are loaded. Now I need an event which fires
after the loading bar in the browser is gone.
The onPostLoad observer fires much to early, cause the code
is long loaded bevore all the images
(...addObserver({onPostLoad:...)
Same with the window.onload event (...window.onload =
showContent();...) fires much to early.
The only thing which is working is placeing the function in
the onload event of the body tag.
Like:
<body onload="showContent();">
But there I can't use it. And there is now body.onload
handler as far as I know there is only the windows.onload handler
and I thought always this is the same event than onload in the body
tag.
Has anyone an idea? Is there a spry event I haven't found for
exact this problem?
Thanks for your help!
regrads
marcus

Hello,
U might want to look in to the SpryImageLoader.js that comes
with the 1.6.1 download. It loads your images, and allows u put
callbacks on them, and set priority of loading them.
http://www.dbooth.net/photos/
uses it to (expect don forgot to upload the
SpryImageLoader.js thats why its not really working :P )
But that will give the basic idea of how to use it.
Spry.Utils.ImageLoader.(url, callback(needs to be a function
or null), priority)

Not all things are loading in Safari (for me)

Similar Messages

Maybe you are looking for